Instruction/ maintenance manual of the product 34951 Harbor Freight Tools
Go to page of 10
BEL T/DISC SANDER Model 34951 ASSEMBL Y AND OPERA TION INSTR UCTIONS Due to continuing impro vements , actual product may diff er slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our website at: http://www .
P age 2 SKU 34951 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Disc Belt Size 5” 1” x 30” Motor 1/3 HP , 2.4 A, 110 V~, 60 Hz, Single Phase Speed 3450 RPM 3350 FPM T able.
P age 3 SKU 34951 For technical questions, please call 1-800-444-3353. USE EYE AND EAR PRO TECTION. Alwa ys wear ANSI-approv ed saf ety goggles. Use a full face mask if the wor k y ou’ re doing produces metal filings, dust or wood chips. Wear a clean dust mask if the work creates a lot of fine or coarse dust.
P age 4 SKU 34951 For technical questions, please call 1-800-444-3353. KEEP GU ARDS IN PLA CE. All guards and fences need to be in proper working order and alignment. Check bef ore ev er y use. NEVER LEA VE T OOL RUNNING UNA TTENDED . Alwa ys tur n off power .
P age 5 SKU 34951 For technical questions, please call 1-800-444-3353. GR OUNDED T OOLS: T OOLS WITH THREE PRONG PLUGS T ools marked with “Grounding Required” hav e a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet.
P age 6 SKU 34951 For technical questions, please call 1-800-444-3353. The smaller the gauge number of the wire, the greater the capacity of the cord. For e xample, a 14 gauge cord can carry a higher current than a 16 gauge cord.
P age 7 SKU 34951 For technical questions, please call 1-800-444-3353. ASSEMBL Y The Belt Sander is shipped almost completely assembled. The major items to be at- tached are the disc table (58), the belt table (31), and the sanding belt (6). (These numbers ref er to the assembly diagram and par ts list at the back of this manual.
P age 8 SKU 34951 For technical questions, please call 1-800-444-3353. INST ALLING AND REMO VING SANDING BEL TS UNPLUG THE MA CHINE FROM THE POWER SOURCE. Unless it has already be taken off , remov e the knob (1) from the top of the sander . Remov e the side cov er (3).
P age 9 SKU 34951 For technical questions, please call 1-800-444-3353. P AR TS LIST P art Description Q’ty 1 Knob 1 2 No . 8 W asher 2 3 Belt Cov er 1 4 M8 x 20 Bolt 2 5 He x K ey Wrench 1 6 Sanding Belt 1 7 No .
P age 10 SKU 34951 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIA GRAM Recor d Product’ s Serial Number Here: Note: If product has no ser ial number , record month and year of purchase instead. Note: Some par ts are listed and shown for illustration pur poses only , and are not av ailable individually as replacement par ts.
An important point after buying a device Harbor Freight Tools 34951 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 34951 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 34951 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 34951 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 34951 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 34951, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 34951.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 34951. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 34951 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
