Instruction/ maintenance manual of the product ScanSnap N1800 Fujitsu
Go to page of 23
.
2 Content s Introduction ........... ........................................................................ ........................ 3 ■ About This Manual ........ ................................................. ............... .............. ..
3 Introduction Thank you for purcha sing the Network Scanner ScanSnap N1800. This easy-to-operate networ k scanner is used to scan document s for further use. Trademarks Microsoft, W indows, and Windows Vista are either registered trademarks or trademar ks of Microsoft Corporation in the United States and/or other countries.
4 ■ Opening Help When the [Help] button is available on the windo w or dialog box that is displa yed during the operation, you can open Help by clicking it. Help provides information about ite ms on the windows and actions to take for the messag es.
5 T o avoid injuries, do not pla ce the scanner in an area where small children may be able to reach. Before moving the scanner , be sure to disconnect the cables th at are connected to the scanner , and disconnect the powe r cable from the AC outlet.
6 ■ Precautions READ ALL OF THIS DOCUMENT AND THE OPERATOR'S GUIDE CAREFULLY BEFORE USING THIS SCANNER. IF THIS SCANNE R IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE CAUSED TO USERS OR BYSTANDERS. Also, keep this document in a safe place so tha t it can be easily referred to during use of this scanner.
7 z Connect the e quipment into an ou tlet on a circuit different from that to which the rece iver is located. z Consult your d ealer or an exp erienced radio/TV technician FCC warning: Changes or modification s not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
8 Chapter 1 Before Using the Scanner 1.1 From Arrival through Operation The following shows the flow from scanner arrival through ope ration. This manual provides informa tion about Steps 1 to 5 shown below. For information about Steps 6 to 9, refer to the manuals downloaded in Step 5.
9 1.3 Part Names This section explains names of the scanner parts. ■ Front view ■ Rear view ADF paper chute Stacker LCD touch panel Scan button Power button Side guides Top cover r elease catch To.
10 Chapter 2 Setting up the Scanner 2.1 Removing the Protective Packaging The scanner comes with a protective foam sheet and protective card atta ched. Follow the proced ure described below to r emove the prot ective packagin g before using the scanner.
11 Chapter 3 Configuring Scanner Basic Settings When the power button is pressed for the first time after purchase, the window fo r scanner basic settings appear s automatically. The basic settin gs for using the scanner can be configur ed with this process.
12 6. Set the scanner name. On the [Scanner Name] windo w, specify the scanner name and group or doma in for joining the network, and press the [Next] button. 7. Set the region/timezone. On the [Region / Timezone] window, s elect the region/timezone and whether to apply daylight saving time, and press the [Next] button.
13 10. Change the admin password. On the [Admin Password] wind ow, specify the administrator password, and pr ess the [Next] button. The default value for the [Cur rent Password] is "password". 11. Set the scanner's IP address. On the [IP Address] windo w, set the scanner's IP address, and press the [Next] button.
14 14. Confirm the configured se ttings. On the settings confirma tion window of the installation wizard, conf irm the configured basic settings, an d press the [OK] button. D The wizard finishes and the login window appears. This concludes the scanner basic settings procedure.
15 Chapter 4 Checking the Network Connection This section describes how to check the status of the network connection. The network connection ca n be checked by perfor ming a ping test. 1. Log in to the scanner wit h the user name and password of the administrator.
16 Chapter 5 Downloading the Manual For this scanner, the Operator 's Guide (PDF), which contains information about scan ner settings, administration, and operations, is provide d in addition with this manual. Read it when using the sca nner. Use Adobe Reader (*) to view the Oper ator's Guide.
17 Appendix A T roubleshooting Network Connection T roubleshooting ■ Checking Basic Network Operation with a Ping T est The network connection may be ch ecked by performing a ping test. For more details on how to perform a ping test, refer to "Chapter 4 Ch ecking the Network Connection" (page 15).
18 ■ Failure to Connec t to a Server Using Its IP Address If a server cannot be conn ected to by using its IP address, or if a scanner does not respond to a ping test by specifying its IP ad dress, try the following: ■ Action Check that the LAN cable is connected to both the scanner and server correctly.
19 ■ Failure to Connect to a Server Using Its Host Name or FQDN If the scanner cannot connect to a ser ver by specifying its host name or FQDN, or if a server does not respond to a ping test by spec.
20 ■ Action Set the scanner URL as a trusted site for Internet Explorer. 1. In Internet Explorer, select the [To ols] menu J [Internet Options]. 2. On the [Security] tab, sele ct [Trusted sites] and press the [Sites] button. 3. Enter the URL of the scanner in the [Add this website to the zone] field, and press the [Add] button.
21 Power T roubleshooting ■ Check item Has the power button been pressed? ■ Action Press the power button. ■ Check item Are the AC cable and AC adapter properly connected to the scanner? ■ Action z Connect the AC cable and the AC adapter properly.
22 Copyright NetAdvantage 2007 Copyright© 2000-2007 Infra gistics, Inc. LEADTOOLS for .NET Copyright © 2005 LEAD T echnologies, Inc. WinPcap3.1 Copyright © 1999 - 2005 NetGroup, Poli tecnico di T orino (Italy). Copyright © 2005 - 2006 CACE T echnologies, Davis (California).
23 THE SOFTWARE IS PROVIDED "AS IS" AND DIGIT AL EQUIPMENT CORP . DISCLAIMS ALL W ARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANT IES OF MERCHANT ABILITY AND FITNESS.
An important point after buying a device Fujitsu ScanSnap N1800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Fujitsu ScanSnap N1800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Fujitsu ScanSnap N1800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Fujitsu ScanSnap N1800 you will learn all the available features of the product, as well as information on its operation. The information that you get Fujitsu ScanSnap N1800 will certainly help you make a decision on the purchase.
If you already are a holder of Fujitsu ScanSnap N1800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Fujitsu ScanSnap N1800.
However, one of the most important roles played by the user manual is to help in solving problems with Fujitsu ScanSnap N1800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Fujitsu ScanSnap N1800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
