







Head Unit Box Parts (X009)

X009 Head Unit X009 Camera Harness






Quick Reference Guides Registration Cards



Universal Installation Kit Parts (G-KTX-009-U)
Head Unit Power Harness


Head Unit Mounting Brackets Key Panel



Universal Trim Bezel Bracket Mounting Hardware
Key Panel Mounting Screws



Place the radio brackets on the radio and note the positioning of the holes. The larger slotted holes should be on the bottom side of the radio as shown.
Bolt the assembled brackets to the radio chassis using the supplied 8mm screws. 3


Assemble the radio and vehicle side brackets using the supplied bracket screws and washers. Tighten these bolts just enough so that the brackets can be repositioned if necessary.



Attach the key panel into the bezel using the guides on both sides. Turn the keys towards the front until they snap into place. 5
Plug in the key connection harness with the “external key unit” label to the key unit and the 3.5mm “MIC IN” pig tail to the head unit. Note the pigtail connection for the included Bluetooth microphone.


Secure the key panel to the bezel using the three key panel screws provided in the kit. 6
Now the Universal Installation Kit is assembled and ready for custom installation in the vehicle. Note that trimming and drilling of the mounting brackets may be required for proper installation of this kit*.


*Note: Any modifications to the mounting bracket may void the bracket’s warranty. Contact Alpine tech support at 1-800- TECH101 if you need assistance.
Bluetooth microphone · input
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.