
MP3/WMA/AAC CD Receiver
CDA-9883E
CT
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano
1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan
161-165 Princes Highway, Hallam Victoria 3803, Australia
Sul Naviglio (MI), Italy
ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany
ALPINE ELECTRONICS DE ESPAÑA, S.A.
ALPINE ELECTRONICS OF AMERICA, INC.
Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588
19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K.
ALPINE ELECTRONICS (BENELUX) GmbH
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 0870-33 33 763
1930 Zaventem, Belgium Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd. Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)






DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product.

This symbol means important instructions. Failure to heed them can result in serious injury or death.
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
DO NOT MIX NEW BATTERIES WITH OLD BATTERIES. INSERT WITH THE CORRECT BATTERY POLARITY. When inserting the batteries, be sure to observe proper polarity (+ and –) as instructed. Rupture or chemical leakage from the battery may cause fire or personal injury.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock.
Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury.

Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.
Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.


Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.

New Discs To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.
Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. Centre Hole
Transparent Sheet Disc Stabilizer
Irregular Shaped Discs Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.
Installation Location Make sure this unit will not be installed in a location subjected to:

Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.
About media that can be played Use only compact discs with the label side showing the CD logo marks below.
If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CD-ReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio files.

3 Grasp the front panel firmly, slide to the left , and then pull to remove.

Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit.
Press SOURCE/ to turn on the unit.
Press and hold SOURCE/ for at least 2 seconds to turn off the unit.
Detaching 1 Turn off the unit power. 2 Press (OPEN) to open the front panel.
To close the front panel, press the left side until it locks as shown in the figure below.

6 Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode.
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Press (OPEN) to open the front panel, and then remove it. 3 Press RESET with a ballpoint pen or similar pointed object.
Turn the Rotary encoder until the desired sound is obtained.
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press /RTN to activate the MUTE mode. The audio level will decrease by about 20 dB.
Pressing /RTN again will bring the audio back to its previous level.
1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP selection mode. 2 Turn the Rotary encoder to select CLOCK ADJUST, and then press / /ENT. 3 Turn the Rotary encoder to set hour. 4 Press / /ENT. 5 Repeat steps 3 and 4 above to set hour and minute.
RESET switch

Presetting Stations Manually
1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized.

Listening to Radio
1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.
1 Press SOURCE/ to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed.
F1 F2 AM F1 3 Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK (Distance mode)
Distance mode:
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Local mode:
1 Press BAND repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected.
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously.
You can search for a radio station by its frequency. 1 Press and hold /ESC for at least 2 seconds in Radio mode to activate Frequency search mode. 2 Turn the Rotary encoder to select the desired frequency. 3 Press / /ENT to receive the selected frequency.

5 To pause playback, press / /ENT. Pressing / /ENT again will resume playback. 6 After pressing (OPEN) to open the front panel, press to eject the disc.

1 Press (OPEN). The front panel will open. 2 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically.
MP3/WMA/AAC Play Display The folder number and file number will be displayed as described below.
Close the front panel manually and “DISC IN” indicator lights up. When a disc is already inserted, press SOURCE/ to switch to the DISC mode.
TUNER DISC iPod*1 CHANGER*2 TUNER
*1 Only when the iPod is connected. *2 Only when the CD changer is connected. 3 While playing back MP3/WMA/AAC, press or to select the desired folder. Pressing and holding or will change folders continuously. 4 Press or to select the desired track (file).
Press 4 to play back repeatedly the track being played. The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
: Only a track is repeatedly played back.
Returning to the beginning of the current track (file):
Press .
: A disc is repeatedly played back.
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
*1 When a CD changer is connected.
Fast forward:
Press and hold .
Folder number display · File number display

MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
Tracks can be searched and played using the CD text on the disc. If a disc is not compatible with text, or a disc is in the changer, searches can be made by track number. 1 Press /ESC during play. This will set the search mode. 2 Turn the Rotary encoder to select the desired track, and then press / /ENT. This will play the selected track.
: Only files in a folder are repeatedly played
back. : A disc is repeatedly played back.
*2 When an MP3 compatible CD changer is connected.
File/Folder Name Search (concerning MP3/WMA/AAC)
Press 5 in the play or pause mode. The tracks (files) on the disc will be played back in random sequence.
To cancel M.I.X. play, press 5 again.
Folder and file names may be searched and displayed during playback. 1 Press /ESC to activate the search mode during MP3/WMA/AAC playback. 2 Turn the Rotary encoder to select Folder Name Search mode or File Name Search mode, and then press / /ENT.
Internal CD mode :
: The tracks are played back in random
sequence.
CD Changer mode :
Folder Name Search mode 3 Turn the Rotary encoder to select the desired folder. 4 Press and hold / /ENT for at least 2 seconds to play back the first file in the selected folder.
: The tracks are played back in random
sequence.
: The tracks on all the CDs in the current
magazine will be included in the random playback sequence.
*3 When a CD changer equipped with the ALL M.I.X. function is connected.
File Name Search mode 3 Press or to select another Folder. 4 Select the desired file by turning the Rotary encoder. 5 Press / /ENT to play back the selected file.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: Files are played back in random sequence.
If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.

Supported playback sampling rates and bit rates
You can search for tracks (files). 1 Press and hold /ESC for at least 2 seconds in the CD/Changer/MP3/WMA/AAC mode to activate Quick Search mode. 2 Turn the Rotary encoder to select a desired track (file). The selected track is played back immediately.
16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps
16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 16 - 320 kbps
This device may not play back correctly depending on sampling rates.
This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data. This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, “NO SUPPORT” is displayed. The tag information may not be correctly displayed, depending on the contents.

Except for private use, duplicating audio data (including MP3/ WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.
MP3, whose official name is “MPEG-1 Audio Layer 3”, is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC.
MP3/WMA/AAC files are prepared, then written to a CD-R or CD- RW using CD-R writing software. A disc can hold up to 510 files/ folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above.
MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realises such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.
The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.
AAC is the abbreviation for “Advanced Audio Coding” and is a basic format of audio compression used by MPEG2 or MPEG4.
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).
WMA, or “Windows Media™ Audio” is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user’s manual for that software. MP3/WMA/AAC files that are playable on this device have the file extensions: MP3: “mp3” WMA: “wma” (ver. 7.1, 8 and 9 are supported) AAC: “m4a”
This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.
There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above . It’s possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes version 7.0 or earlier is supported.

Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software’s documentation. The playback order of the folders and files is as follows.
This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.

This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.
Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.
Song information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC files.
The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs.
* The folder No./ folder Name will not be displayed if no file is contained in the folder.

Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press A.SEL to select the BASS (Bass Centre Frequency) control mode.

Setting the Bass Centre Frequency
2-1 Press BAND to select the desired bass centre frequency.
80 Hz 100 Hz 200 Hz 60 Hz 80 Hz
Emphasizes the displayed bass frequency ranges.
2-2 Press SOURCE/ to select the desired bass bandwidth.
1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.
1 2 3 4
Each press changes the mode as follows:
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency.
SUBWOOFER*1 BASS TREBLE BALANCE FADER DEFEAT VOLUME SUBWOOFER
Subwoofer: 0 ~ +15 Bass level: –7 ~ +7 Treble level: –7 ~ +7 Balance: L15 ~ R15 Fader: R15 ~ F15 Defeat: ON/OFF Volume: 0 ~ 35
2-3*Turn the Rotary encoder to select the desired bass level (–7~+7). You can emphasize or weaken the bass level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode.
*1 When the subwoofer mode is set to OFF, its level cannot be adjusted. 2 Turn the Rotary encoder (AUDIO) until the desired sound is obtained in each mode. By setting Defeat ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults.
* The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 13).

Adjusting the High Pass Filter
You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press A.SEL to select the TREBLE (Treble Centre Frequency) control mode.
The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 Press A.SEL to select the HPF (High Pass Filter) mode.
BASS TREBLE HPF BASS 2 Turn the Rotary encoder to select the HPF frequency.
2-1 Press BAND to select the desired treble centre frequency.
OFF 80 Hz 120 Hz 160 Hz 3 Press and hold /ESC for at least 2 seconds to return to normal mode.
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasizes the displayed treble frequency ranges.
2-2*Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasize or weaken the treble level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode.
Loudness introduces a special low-and high-frequency emphasis at low listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least 2 seconds to activate or deactivate the loudness mode.
* The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to “Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat” (page 13).


When displaying Text, the following indicators are lit according to the mode.

Blinks in search mode when the Rotary encoder is turned. Also Blinks when operation, such as fast forward etc., is performed.
Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc., while playing MP3/WMA/AAC files.
Lights up in SETUP mode.

Press TITLE. The display will change every time the button is pressed.
The display in Radio mode:
The display in CD mode:
TRACK NO./ELAPSED TIME TRACK NO./CLOCK TEXT (DISC NAME)*1 TEXT (TRACK NAME)*1 TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO. FILE NO./CLOCK FOLDER NAME*3 FILE NAME ARTIST NAME*2 ALBUM NAME*2 SONG NAME*2 FILE NO./ELAPSED TIME
*1 Displayed during playback of a disc with CD text. If there is no Text (Disc Name or Track Name), “DISC TEXT”/ “TRACK TEXT” is displayed. “DISC TEXT”/“TRACK TEXT” is displayed for changer. *2 ID3 tag/WMA tag If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored. If the Scroll Setting (page 17) is set to “SCROLL AUTO”, the tag information will scroll automatically. If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is displayed. *3 The root folder is displayed as “FOLDER”.
TITLE Rotary encoder

SETUP
Text:
Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as “text”.
You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc., can be modified.

Press TITLE repeatedly until the time is displayed.
Each press changes the display. For details, see “Displaying the Text” (page 15).
Use steps 1 to 4 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item.
1 Press and hold FUNC./SETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the desired item, and then press / /ENT. (e.g. Select SUBWOOFER)
BLUETOOTH IN*1 LCD CONTRAST DIMMER SUBWOOFER (SUBW. SYSTEM)*2 PLAY MODE SCROLL TYPE TEXT SCROLL INT MUTE*3 CLOCK ADJUST AUX IN (AUX NAME)*4 CHANGER NAME DIGITAL AUX POWER IC LANGUAGE DEMO BLUETOOTH IN
*1 Displayed only when INT MUTE is OFF. *2 Displayed only when SUBW is ON. *3 Displayed only when BLUETOOTH IN is OFF. *4 Displayed only when AUX IN is ON. 3 Turn the Rotary encoder to change the setting. (e.g. Select SUBW ON or SUBW OFF.) 4 Press and hold FUNC./SETUP for at least 2 seconds to return to normal mode.

BLUETOOTH IN
SCROLL AUTO / SCROLL MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CD- TEXT discs, as well as the text information of MP3/WMA/AAC files, folder names and tags.
BT IN ADP / BT IN OFF (Initial setting)
If an optional Bluetooth Box is connected, you can place a hands-free call by a Bluetooth-equipped mobile phone. Make this setting when the Bluetooth Box is connected and the Bluetooth function is used. For details, refer to the Owner’s Manual of the optional Bluetooth Box. Set ADP when the Bluetooth Box is connected.
scrolled continuously. In addition, all tag information is automatically rotated into the display continuously, without pressing the TITLE button. SCROLL MANU: The above information is scrolled only when a disc is loaded, a channel or track is changed, etc.
SUBW. ON (Initial setting) / SUBW. OFF
When the subwoofer is on, perform the steps below to adjust the subwoofer output level.
LANGUAGE 1 (Initial setting) / LANGUAGE 2
1 In the normal mode, press the Rotary encoder repeatedly to select the SUBWOOFER mode.
Two types of font can be selected.
2 Adjust the level by turning the Rotary encoder.
CONTRAST
Setting the Subwoofer System
SUBW. SYS 1 (Initial setting) / SUBW. SYS 2
You can adjust the display contrast for better visibility.
You can adjust in a range of -5 and +3.
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
main volume setting. For example, even at low volume settings, the subwoofer is still audible.
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
MP3/WMA/AAC
DIMMER AUTO (Initial setting) / DIMMER MANU
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit’s backlighting is too bright at night.
CD-DA (Initial setting) / CD-DA&MP3
This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and the MP3/WMA/AAC data, playback starts from the CD data portion of the disc.
SCROLL TYPE1 / SCROLL TYPE2 (Initial setting)
Choose from two scrolling methods. Select the type you prefer.
single character at a time, until the entire title has scrolled. SCROLL TYPE2: Words are built up from left to right, a single
CD-DA: Only the CD data in session 1 can be played back. CD-DA&MP3: CD data, MP3/WMA/AAC files in mixed mode,
character at a time. When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown.
and multi-session discs can be played back.

External Device
AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C) to this component. You can change the AUX name display when AUX IN is set to ON. Press / /ENT when AUX IN is set to ON, and select AUX NAME by turning the Rotary encoder, and then press / /ENT. After that, turn the Rotary encoder to select the desired AUX name. If the KCA- 410C is connected, it is possible to select two AUX names.
POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.
is used to drive an external amplifier. In this setting, the head unit’s internal amplifier is turned OFF and can not drive speakers.
CHANGER (Initial Setting) / USB / PORTABLE
This setting is used when the head unit is connected to the USB Adapter for MP3 (KCA-620M). You can set the name to be displayed on the unit depending on the device to which the USB Adapter for MP3 (KCA- 620M) is connected.
D-AUX ON / D-AUX OFF (Initial setting)
amplifier.
When an ALPINE Ai-NET compatible digital audio processor (PXA- H701) and a DVD player (DVE-5207) not compatible with Ai-NET are connected, set Digital AUX to ON to enjoy 5.1-channel surround sound.

MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.

Searching for a desired Song
An iPod can contain hundreds of songs. By using file tag information and keeping these songs organised in playlists, this unit’s search functions will ease song searches. Each music category has its own individual hierarchy. Use the Playlist/ Artist/Album/Song/Podcast/Genre/Composer search mode to narrow searches based on the table below.


An iPod® can be connected to this unit by using the proprietary ALPINE FULL SPEED™ Connection Cable (KCE-422i) (sold separately). When this unit is connected by using the cable, the controls on the iPod are not functional.
For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs. 1 Press /ESC to activate the search selection mode. 2 Turn the Rotary encoder to select the Artist search mode, and then press / /ENT.
PLAYLIST ARTIST ALBUM SONG PODCAST GENRE COMPOSER PLAYLIST 3 Turn the Rotary encoder to select the desired Artist, and then press / /ENT. 4 Turn the Rotary encoder to select an album, and then press / /ENT. 5 Turn the Rotary encoder to select a song and press / /ENT. The selected song is played back.
Fourth generation iPod: Ver. 3.1.1 Fifth generation iPod: Ver. 1.1.2 iPod photo: Ver. 1. 2.1 iPod mini: Ver. 1. 4.1 iPod nano: Ver. 1.2
1 Press SOURCE/ to switch to the iPod mode.
TUNER DISC iPod*1 CHANGER*2 TUNER
*1 Only when the iPod is connected. *2 Only when the CD changer is connected. 2 Press or to select the desired song.
Return to the beginning of the current song: Press .
Fast backward: Press and hold .
Advance to the beginning of the next song: Press .
Fast forward: Press and hold .
3 To pause playback, press / /ENT. Pressing / /ENT again will resume playback.
Rotary encoder

Select Playlist/Artist/Album/Podcast/ Genre/Composer
You can search a song from all songs in the iPod without selecting an album, artist, etc. 1 Press and hold /ESC for at least 2 seconds to activate the Quick Search mode. 2 Turn the Rotary encoder to select a desired song. The selected song is played back immediately.
Playlist/Artist/Album/Podcast/Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed.
Press or to select the desired Playlist/Artist/ Album/Podcast/Genre/Composer.
Direct Search Function
The Shuffle function of the iPod is displayed as M.I.X. on this unit.
Shuffle Albums: The songs on each album are played back in proper order. Upon completion of all the songs on the album, the next album is selected randomly. This continues until all albums have been played.
The unit’s direct search function can be used to search for an album, song, etc., more efficiently. In the Playlist/Artist/Album/Song/Podcast/ Genre/Composer mode, You can quickly target any song.
In the search mode, press any one of the preset buttons (1 through 6) to quickly skip over a designated percent of your song content. Song search example: If there are 100 songs in your iPod, they are divided into 6 groups using percentages (shown below). These groups are assigned to preset buttons (1 through 6).
Shuffle Songs: Song shuffle randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played. 1 Press 5 . The songs are played back in random sequence.
Example 1: Suppose the song you are searching for is located at around the middle (50%) of your library: press button 4 to jump to the 50th song and turn the Rotary encoder to find the desired song.
M.I.X. M.I.X. (off) M.I.X. (Shuffle Albums) (Shuffle Songs)
2 To cancel M.I.X. play, select (off) with the above procedure.
Example 2: Suppose the song you are searching for is located near the end (83%) of your library: press button 6 to jump to the 83rd song and turn the Rotary encoder to find the desired song.

All 100 songs (100%) 0% 17% 33% 50% 67% 83% Preset buttons 1 2 3 4 5 6
Shuffle ALL: Shuffle ALL plays all songs in the iPod randomly. Any one song does not play back again until all songs have been played back. 1 Press 6. The songs are played back in random sequence.
M.I.X. (off) M.I.X. (Shuffle ALL)
2 To cancel M.I.X. play, select (off) with the above procedure.


Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back. 1 Press 4. The song is played back repeatedly.
RPT (off) RPT (Repeat One)
2 To cancel repeat play, select (off) with the above procedure.
Select buttons (1 through 6)
Displaying the Text
An optional 6-disc or 12-disc CD Changer may be connected to this unit if it is Ai-NET compatible. With a CD Changer connected to the Ai-NET input of this unit, the CD Changer will be controllable from this unit. Using the KCA-400C (Multi-Changer Switching device) or the KCA-410C (Versatile Link Terminal) multiple changers can be controlled by this unit. See “Multi-Changer Selection (Optional)” on page 22 for selecting the CD Changers.
You can display the tag information of a song in the iPod.
Press TITLE. Each press changes the display.
TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME* ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME
* TAG information “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag information.

3 Press the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD/MP3 playback starts.
* When a 12-disc CD changer is connected.


If you connect a changer compatible with MP3, you can play CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit. 1 Press SOURCE/ to switch to the MP3 Changer mode. 2 Press any one of the disc select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. 3 To pause playback, press / /ENT. Pressing / /ENT again will resume playback.
Multi-Changer Selection (Optional)

Source Button Press this button to select the audio source.
Alpine’s Ai-NET system will support up to 6 CD Changers. When operating two or more changers, the KCA-400C (Multi-Changer Switching device) must be used. If you use 1 Switching device, you can connect up to 4 CD Changers. If you use 2 Switching devices, you can connect up to 6 CD Changers. When using KCA-410C (Versatile Link Terminal), you can connect two changers and two external outputs (AUX). 1 Press SOURCE/ on this unit to activate the CD Changer mode. Alternatively, press SOURCE on the remote control (RUE-4202) to activate the CD Changer mode.
Volume Adjustment Buttons To increase the volume level: Press the button
Button Radio mode: Pressing this button will select, in ascending order, stations programmed into the radio’s presets as shown below.

CD Changer mode: DISC Select (UP) button Press this button to select a disc in ascending order.
MP3/WMA/AAC mode: Folder Select (UP) button Press this button to select the folder.
MP3 compatible CD changer mode: Folder Select (UP) / DISC Select (UP) button Press this button to select a folder in ascending order. Press and hold this button to select a disc in ascending order.
2 Press BAND on this unit or the RUE-4202 to activate the CD Changer Selection mode. The CD Changer Selection mode remains active for a few seconds. 3 Press BAND until the desired CD Changer indicator appears on the display. Alternatively press BAND on the Remote Control until the desired changer indicator appears on the display.
iPod mode: Switches Playlist/Artist/Album.
DN Button Radio mode: SEEK (DN) Button CD/iPod mode: Press this button to go back to the beginning of the current track.
/ Button Press this button to switch between the Play and Pause modes for CD.
Audio Processor Button Press the button to call the external audio processor mode when the external audio processor is connected*1.
*1 For the operation of external audio processor, refer to the Owner’s Manual of the external audio processor you purchased.
Power Button Press this button to turn the power on/off.

Band Button Radio mode: BAND Button Press this button and the band will change.
Applicable battery: Use two “AAA” sized dry batteries or equivalent. 1 Opening the battery cover Slide out the battery cover while firmly pressing in the direction of the arrow.
Changer mode: To switch the changer.
UP Button Radio mode: SEEK (UP) button CD/iPod mode: Press this button to advance to the beginning of the next track.
Button Radio mode: Pressing this button will select, in descending order, stations programmed into the radio’s presets as shown below.
CD Changer mode: DISC Select (DN) button Press this button to select a disc in descending order. MP3/WMA/AAC mode: Folder Select (DN) button Press this button to select the folder.
2 Replacing the battery Insert the batteries, observing the polarities as illustrated.
MP3 compatible CD changer mode: Folder Select (DN) / DISC Select (DN) button Press this button to select a folder in descending order. Press and hold this button to select a disc in descending order.
iPod mode: Switches Playlist/Artist/Album.
Mute Button Press this button to lower the volume by 20 dB instantly. Press this button again to cancel.
3 Closing the cover Slide the cover as illustrated until a click is heard.

Point the remote control transmitter at the remote control sensor.
This unit may be controlled from the vehicle’s audio controls. An optional Alpine Remote Control Interface Box must be used. For details, contact your Alpine dealer.

In Case of Difficulty
the CD Player Operation section.
Unable to fast forward or backward the CD. • The CD has been damaged. - Eject the CD and discard it; using a damaged CD in your unit
If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.
can cause damage to the mechanism.
No function or display. • Vehicle’s ignition is off. - If connected following instructions, the unit will not operate
your nearest Alpine dealer.
CD playback sound skips without vibration. • The disc is dirty or scratched. - Clean the disc; damaged disc should be replaced.
necessary. • Internal micro-computer malfunctioned due to interference noise etc. - Press the RESET switch with a ballpoint pen or other pointed
Error displays (built-in CD player only). • Mechanical error. - Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.
article.
CD-R/CD-RW playback not possible. • Close session (finalization) has not been performed. - Perform finalization and attempt playback again.
Unable to receive stations. • No antenna or open connection in cable. - Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
MP3, WMA or AAC is not played back. • Writing error occurred. The CD format is not compatible. - Make sure the CD has been written in a supported format.
Refer to “About MP3/WMA/AAC” (pages 11-12), then rewrite in the format supported by this device.
properly grounded at its mounting location. • The antenna may not be the proper length. - Make sure the antenna is fully extended; if broken, replace the
The sound is not output from the speakers. • Unit has no output signal of the internal amplifier. - POWER IC is switched to “ON” (page 18).
antenna with a new one.
iPod does not play and no sound is output. • The iPod has not been recognized. - Reset this unit and the iPod. Refer to “Initial System Start-Up”
location.
(page 7). To reset the iPod, refer to the Owner’s Manual of the iPod.
CD Player/Changer not functioning. • Out of operating temperature range +50°C (+120°F) for CD. - Allow the vehicle’s interior (or trunk) temperature to cool.
CD playback sound is wavering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1
hour).

CD Changer finishes the eject function, insert an empty CD magazine into the CD Changer to receive the disc left inside the CD Changer.
normal operating range.
Press the button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer.
button for a few times, consult your Alpine dealer.
“Connections”). Make sure the cable is not bent excessively. • The iPod’s battery remains low. - Refer to the iPod’s documentation and charge the battery.
adapter, using the iPod cable.
normal operating range.
unit.
pull out the magazine. Check the indication. Insert the magazine again. If the magazine cannot be pulled out, consult your Alpine dealer. • Magazine ejection not possible. - Press the magazine eject button. If the magazine does not eject,
consult your Alpine dealer.

Tuning Range 87.5-108.0 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.0 dB
Tuning Range 531-1,602 kHz Sensitivity (IEC Standard) 22.5 µV/27 dB
Frequency Response 5-20,000 Hz (±1 dB) Wow & Flutter (% WRMS) Below measurable limits Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz)
Wave length 795 nm Laser power CLASS I
Power Requirement 14.4 V DC (11-16 V allowable) Maximum Power Output 50 W × 4 Maximum Pre-Output Voltage 2 V/10 k ohms Bass +14/-14 dB at 100 Hz Treble ±14 dB at 10 kHz Weight 1.6 kg (3 lbs. 8 oz)
Width 178 mm (7") Height 50 mm (2") Depth 162 mm (6-3/8")
Width 170 mm (6-3/4") Height 46 mm (1-13/16") Depth 24 mm (15/16")

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

Hex Nut (M5) Screw


When you install this unit in your car, do not remove the detachable front panel. If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the CDA-9883E. Connect all other leads of the CDA-9883E according to details described in the CONNECTlONS section.
* If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem.
Remove the mounting sleeve from the main unit (see “Removal” on page 29).

3 Slide the CDA-9883E into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.
Screws (M5 × 8) (Included)


*1 The label is attached on the bottom of the unit.

Left Rear (+) Speaker Output Lead (Green)
Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable.
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Ai-NET Connector Connect this to the output or input connector of another device (CD Changer, Equalizer, etc.) equipped with Ai-NET.
Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor.
Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio interface output of a cellular phone which provides ground shorting when a call is received.
Steering Remote Control Interface Connector To steering Remote control interface box.
Illumination Lead (Orange) This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of this unit to dim whenever the vehicle’s lights are turned on.
Rear Output RCA Connectors RED is right and WHITE is left.
Front Output RCA Connectors RED is right and WHITE is left.
Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.
Subwoofer RCA Connectors RED is right and WHITE is left.
Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle’s battery.
iPod Direct Connector Control iPod signals. Connect this to an iPod or to an optional Bluetooth Box. To use a hands-free mobile phone, an optional Bluetooth Box connection is required. For details on connection, refer to the Owner’s Manual of the Bluetooth Box.
Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
Power Supply Connector
Right Front (+) Speaker Output Lead (Grey)
System Switch When connecting a processor or divider using Ai-NET, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)


Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.