
MP3/WMA/AAC CD Receiver with Bluetooth ®
CDE-103EBT

MP3/WMA/AAC CD Receiver CDE-102E/CDE-101E/
CDE-101EM
ALPINE ELECTRONICS MARKETING, INC.
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano
1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan
161-165 Princes Highway, Hallam Victoria 3803, Australia
Sul Naviglio (MI), Italy
ALPINE ELECTRONICS GmbH Frankfurter Ring 117, 80807 München, Germany
ALPINE ELECTRONICS DE ESPAÑA, S.A.
ALPINE ELECTRONICS OF AMERICA, INC.
Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588
19145 Gramercy Place, Torrance, California 90501, U.S.A. Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House Fletchamstead Highway, Coventry CV4 9TW, U.K.
ALPINE ELECTRONICS (BENELUX) GmbH
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto, Ontario M3J 2M9, Canada Phone 1-800-ALPINE-1 (1-800-257-4631)
Phone 0870-33 33 763
1930 Zaventem, Belgium Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle
DAESUNG ELTEC CO., LTD.
Phone 031-711-1731 Web www.dseltec.co.kr
Cedex, France Phone 01-48638989
YAMAGATA (Wuxi) Co., Ltd. Block 28-25, Changjiang Nanlu, WND, jiangsu, China
Designed by ALPINE Japan
Printed in China (Y)






DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN INSERTION SLOTS OR GAPS. Doing so may result in personal injury or damage to the product.

This symbol means important instructions. Failure to heed them can result in serious injury or death.
This symbol means important instructions. Failure to heed them can result in injury or material property damage.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return it to your authorized Alpine dealer or the nearest Alpine Service Centre for repairing.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL HEAR OUTSIDE NOISES WHILE DRIVING. Excessive volume levels that obscure sounds such as emergency vehicle sirens or road warning signals (train crossings, etc.) can be dangerous and may result in an accident. LISTENING AT LOUD VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING DAMAGE.
Product Cleaning Use a soft dry cloth for periodic cleaning of the product. For more severe stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Temperature Be sure the temperature inside the vehicle is between +60°C (+140°F) and –10°C (+14°F) before turning your unit on.
MINIMIZE DISPLAY VIEWING WHILE DRIVING. Viewing the display may distract the driver from looking ahead of the vehicle and cause an accident.
Moisture Condensation You may notice the CD playback sound wavering due to condensation. If this happens, remove the disc from the player and wait about an hour for the moisture to evaporate.
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
Damaged Disc Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
Maintenance If you have problems, do not attempt to repair the unit yourself. Return it to your Alpine dealer or the nearest Alpine Service Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS. Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS. Use for other than its designed application may result in fire, electric shock or other injury.

Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is off.
Installation Location Make sure this unit will not be installed in a location subjected to:

Correct Handling Do not drop the disc while handling. Hold the disc so you will not leave fingerprints on the surface. Do not affix tape, paper, or gummed labels to the disc. Do not write on the disc.

Inserting Discs Your player accepts only one disc at a time for playback. Do not attempt to load more than one disc. Make sure the label side is facing up when you insert the disc. “ERROR” will be displayed on your player if you insert a disc incorrectly. If “ERROR” continues to be displayed even though the disc has been inserted correctly, push the RESET switch with a pointed object such as a ballpoint pen. Playing a disc while driving on a very bumpy road may result in skips, but this will not scratch the disc or damage the player.
Disc Cleaning Fingerprints, dust, or soil on the surface of the disc could cause the CD player to skip. For routine cleaning, wipe the playing surface with a clean, soft cloth from the centre of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc.
New Discs To prevent the CD from jamming, “ERROR” is displayed if discs with irregular surfaces are inserted or if discs are inserted incorrectly. When a new disc is ejected immediately after initial loading, use your finger to feel around the inside of the centre hole and outside edge of the disc. If you feel any small bumps or irregularities, this could inhibit proper loading of the disc. To remove the bumps, rub the inside edge of the hole and outside edge of the disc with a ballpoint pen or other such instrument, then insert the disc again.

Disc Accessories There are various accessories available on the market for protecting the disc surface and improving sound quality. However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players.
Irregular Shaped Discs Be sure to use round shape discs only for this unit and never use any special shape discs. Use of special shape discs may cause damage to the mechanism.
Transparent Sheet Disc Stabilizer

Alpine accepts no responsibility for lost data, etc., even if data, etc. is lost while using this product.
Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again.
About media that can be played Use only compact discs with the label side showing the CD logo marks below.
If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordables)/CD-RWs (CD- ReWritables) which have been recorded only on audio devices. You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC formatted audio files.

Attaching 1 Insert the right side of the front panel into the main unit. Align the groove on the front panel with the projections on the main unit. 2 Push the left side of the front panel until it locks firmly into the main unit.

* This illustrator is CDE-103EBT.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first time, after changing the car battery, etc. 1 Turn off the unit power. 2 Remove the detachable front panel. 3 Press RESET with a ballpoint pen or similar pointed object.

Press and hold SOURCE/ for at least 2 seconds to turn off the unit.
Detaching and Attaching the Front Panel
Turn the Rotary encoder until the desired sound is obtained.
Detaching 1 Turn off the unit power. 2 Press (Release) at the lower left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
Activating the Audio Mute function will instantly lower the volume level by 20 dB.
Press /MUTE to activate the MUTE mode. The audio level will decrease by about 20 dB.
Pressing /MUTE again will bring the audio back to its previous level.
Rotary encoder · RESET switch

Radio
1 Press and hold SOUND/SETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the CLOCK ADJ mode, and then press / /ENT. The time indication will blink. 3 Turn the Rotary encoder to adjust the hours while the time indication is blinking. 4 When the hour has been adjusted, press / /ENT. 5 Turn the Rotary encoder to adjust the minutes while the time indication is blinking. 6 Press and hold SOUND/SETUP for at least 2 seconds to return to normal mode.

* This illustrator is CDE-103EBT.
1 Press SOURCE/ to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1) 3 Press TUNE/A.ME to select the tuning mode.

This unit can be controlled with an optional Alpine remote control. For details, consult your Alpine dealer. Point the optional remote control transmitter at the remote-control sensor.
DX SEEK (Distance mode) SEEK (Local mode) OFF (Manual mode) DX SEEK
Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning).
Only strong stations will be automatically tuned in (Automatic Seek Tuning).
The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously.
1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press and hold, for at least 2 seconds, any one of the preset buttons (1 through 6) into which you wish to store the station. The selected station is stored. The display shows the band, preset number and station frequency memorized.


1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into preset buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1.
* This illustrator is CDE-103EBT.
1 Press BAND repeatedly until the desired band is displayed. 2 Press any one of the station preset buttons (1 through 6) that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected.
1 Insert a disc with the label side facing up. The disc will be pulled into the unit automatically, and the “ ” indicator lights up .
When a disc is already inserted, press SOURCE/ to switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO iPod*1/AUX+*2 BT AUDIO*3 AUX*4 TUNER
*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17). *2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17). *3 Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16). *4 Refer to “Using the Front AUX Input Terminal (CDE-103EBT/ CDE-102E only)” (page 15). 2 While playing back MP3/WMA/AAC, press 1 or 2 to select the desired folder. Pressing and holding 1 or 2 will change folders continuously.

3 Press or to select the desired track (file).
CD mode :
Returning to the beginning of the current track (file):
Press .
: Only a track is repeatedly played back.
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
MP3/WMA/AAC mode :
Fast forward:
Press and hold . 4 To pause playback, press / /ENT. Pressing / /ENT again will resume playback. 5 To eject the disc, press .
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
Press 5 in the play or pause mode. The tracks (files) on the disc will be played back in random sequence.
To cancel M.I.X. play, press 5 again.
CD mode :
: The tracks are played back in random sequence.
MP3/WMA/AAC Play Display The folder number and file number will be displayed as described below.
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.
* In the USB mode, all files stored in the USB memory are played back in random sequence, and the “ ” indicator lights up.
Press 4 to play back repeatedly the track being played. The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
Folder number display · File number display

Quick Search
On discs utilizing CD Text, songs can be searched and played by using their recorded titles. For discs without CD Text, searches are made using the track numbers associated with each song. 1 Press /ESC during play. This will set the search mode, and the “ ” indicator lights up. 2 Turn the Rotary encoder to select the desired track, and then press / /ENT. This will play the selected track.
You can search for tracks (files). 1 Press and hold /ESC for at least 2 seconds in the CD/MP3/WMA/AAC mode to activate Quick Search mode. The “ ” indicator lights up. 2 Turn the Rotary encoder to select a desired track (file). The selected track is played back immediately.
File/Folder Name Search (concerning MP3/WMA/AAC)

Except for private use, duplicating audio data (including MP3/WMA/AAC data) or distributing, transferring, or copying it, whether for free or for a fee, without permission of the copyright holder is strictly prohibited by the Copyright Act and by international treaty.
Folder and file names may be searched and displayed during playback. 1 During MP3/WMA/AAC playback, press /ESC to activate the search mode. The “ ” indicator lights up. 2 Turn the Rotary encoder to select Folder Name Search mode or File Name Search mode, and then press / /ENT.
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a compression standard prescribed by the ISO, the International Standardization Organization and MPEG which is a joint activity institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is capable of compressing audio data at extremely high ratios, reducing the size of music files to as much as one-tenth their original size. This is achieved while still maintaining near CD quality. The MP3 format realises such high compression ratios by eliminating the sounds that are either inaudible to the human ear or masked by other sounds.
Folder Name Search mode 3 Turn the Rotary encoder to select the desired folder. 4 Press and hold / /ENT for at least 2 seconds to play back the first file in the selected folder.
WMA, or “Windows Media™ Audio,” is compressed audio data. WMA is similar to MP3 audio data and can achieve CD quality sound with small file sizes.
AAC is the abbreviation for “Advanced Audio Coding,” and is a basic format of audio compression used by MPEG2 or MPEG4.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC codecs. For details on creating MP3/WMA/AAC files, refer to the user’s manual for that software. MP3/WMA/AAC files that are playable on this device have the file extensions “mp3” / “wma” / “m4a.” Files with no extension cannot be played back (WMA ver. 7.1, 8 and 9 are supported). Protected files are not supported, neither are raw AAC files (using the “.aac” extension).
File Name Search mode 3 Press 1 or 2 to select another Folder. 4 Select the desired file by turning the Rotary encoder. 5 Press / /ENT to play back the selected file.
There are many different versions of the AAC format. Confirm that the software being used conforms to the acceptable formats listed above. It’s possible that the format may be unplayable even though the extension is valid. Playback of AAC files encoded by iTunes is supported.
What is MP3? · What is WMA? · What is AAC?

Supported playback sampling rates and bit rates
Files are played back in the order that the writing software writes them to the disc. Therefore, the playback order may not be what is expected. Verify the writing order in the software’s documentation. The playback order of the folders and files is as follows.
16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 8 - 320 kbps

16 kHz, 12 kHz, 11.025 kHz, 8 kHz Bit rates: 16 - 320 kbps
This device may not play back correctly depending on sampling rates.
This device supports ID3 tag v1 and v2, and WMA tag. If tag data is in an MP3/WMA/AAC file, this device can display the title (track title), artist name, and album name ID3 tag/WMA tag data.
This device can only display single-byte alphanumeric characters (up to 30 for ID3 tags and up to 15 for WMA tags) and the underscore. For non-supported characters, “NO SUPPORT” is displayed. If information contains characters other than ID3 tag information, the audio file may not be played back. The tag information may not be correctly displayed, depending on the contents.
* The folder No./ folder Name will not be displayed if no file is contained in the folder.
MP3/WMA/AAC files are prepared, then written to a CD-R or CD-RW using CD-R writing software. A disc can hold up to 510 files/folders (including Root Folders), and the maximum number of folders is 255. Playback may not be performed if a disc exceeds the limitations described above.
This is the “sound” compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files.
The media that this device can play back are CD-ROMs, CD-Rs, and CD-RWs.
This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44.1 kHz, so the sound is sampled (recorded) 44,100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data.
This device supports discs formatted with ISO9660 Level 1 or Level 2.
Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and ‘_’ (underscore).
Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format.
Song information such as track titles, artist names, album names, etc., written into MP3/WMA/AAC files.
This device also can play back discs in Joliet, Romeo, etc., and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc., are not displayed correctly.
The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing.


You can change the Bass Frequency emphasis to create your own tonal preference. 1 Press SOUND/SETUP repeatedly to select the BASS mode.
Setting the Bass Centre Frequency
2-1 Press BAND to select the desired bass centre frequency.
80 Hz 100 Hz 200 Hz 60 Hz 80 Hz
* This illustrator is CDE-103EBT.
Emphasises the displayed bass frequency ranges.
Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat
2-2 Press SOURCE/ to select the desired bass bandwidth.
1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode.
Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency.
Each press changes the mode as follows:
SUBWOOFER* BASS LEVEL TRE LEVEL BALANCE FADER DEFEAT VOLUME SUBWOOFER
Subwoofer : +0 ~ +15 Bass level: –7 ~ +7 Treble level: –7 ~ +7 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : ON/OFF Volume : 0 ~ 35
2-3*1Turn the Rotary encoder to select the desired bass level (–7~+7). You can emphasise or weaken the bass level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2 Turn the Rotary encoder until the desired sound is obtained in each mode. By setting DEFEAT ON, previously adjusted settings of BASS LEVEL and TRE LEVEL will return to the factory defaults.
*1 The adjustment can also be made by pressing Rotary encoder. Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat” (page 12).

Turning Loudness On/Off
You can change the Treble Frequency emphasis to create your own tonal preference. 1 Press SOUND/SETUP repeatedly to select the TREBLE mode.
Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear’s decreased sensitivity to bass and treble sound.
Press and hold Rotary encoder (LOUD) for at least 2 seconds to activate or deactivate the loudness mode.
2-1 Press BAND to select the desired treble centre frequency.
10.0 kHz 12.5 kHz 15.0 kHz 17.5 kHz 10.0 kHz
Emphasises the displayed treble frequency ranges.
2-2*2Turn the Rotary encoder to select the desired treble level (–7~+7). You can emphasise the treble level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode.
*2 The adjustment can also be made by pressing Rotary encoder. Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/ Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat” (page 12).
The High Pass Filter on this unit can be adjusted to suit your personal taste. 1 Press SOUND/SETUP repeatedly to select the HPF mode.
2 Turn the Rotary encoder to select the desired HPF frequency.
OFF 60 Hz 80 Hz 100 Hz
All frequencies above the selected cutoff are output. 3 Press and hold /ESC for at least 2 seconds to return to normal mode.

Other Functions
When displaying Text, the following indicators are lit according to the mode.


* This illustrator is CDE-103EBT.
Song Name*1/ File Name being displayed
Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc., while playing MP3/WMA/AAC files.
*1 Tag information If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is displayed. *2 The root folder of disc is displayed as “FOLDER”. The root folder of USB memory is displayed as “ROOT”. *3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/ “TRACK TEXT” is displayed. *4 CDE-102E/CDE-101E/CDE-101EM only.
Press VIEW. The display will change every time the button is pressed.
The display in Radio mode:
Text:
Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as “text.”
The display in CD mode:
TRACK NO./ELAPSED TIME TRACK NO./CLOCK TEXT (DISC NAME)*1 TEXT (TRACK NAME)*1 TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME FOLDER NO./FILE NO. FILE NO./CLOCK FOLDER NAME FILE NAME ARTIST NAME*2 ALBUM NAME*2 SONG NAME*2 FILE NO./ELAPSED TIME
The display in AUX mode (CDE-103EBT/CDE-102E only):
Press VIEW repeatedly until the time is displayed. Each press changes the display. For details, see “Displaying the Text” (page 14).
The display in BT AUDIO mode (CDE-102E/CDE-101E/CDE-101EM only): The Following display will be shown only when a telephone or Bluetooth Streaming device with Metadata capabilities is correctly connected with a Bluetooth INTERFACE (KCE-400BT). (Alpine KCE-400BT) (Sold Separately). (For details on Bluetooth INTERFACE, refer to the Owner’s Manual of KCE-400BT).
BT A/ELAPSED TIME BT A/CLOCK ARTIST NAME*2 ALBUM NAME*2 SONG NAME*2 BT A/ELAPSED TIME
*1 Displayed during playback of a disc with CD text. *2 ID3 tag/WMA tag If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, the ID3 tag/WMA tag information is displayed (e.g., song name, artist name, and album name). All other tag data is ignored.

SETUP
You can flexibly customize the unit to suit your own preferences and usage. From the SETUP menu, Sound Customizing, Visual Customizing, etc., can be modified.
Connect a portable music player, etc. by simply connecting it to the input on the front panel. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).

Press SOURCE/ , and select the AUX mode to listen to the portable device.
TUNER DISC USB AUDIO iPod*1/AUX+*2 BT AUDIO*3 AUX TUNER
*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17). *2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17). *3 CDE-102E/CDE-101E/CDE-101EM only. Displayed only when BT IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16).
* This illustrator is CDE-103EBT.
Use steps 1 to 4 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item.
Portable player, etc. Main unit

1 Press and hold SOUND/SETUP for at least 2 seconds to activate the SETUP mode.
2 Turn the Rotary encoder to select the desired SETUP menu, and then press / /ENT. (e.g. Select SUBWOOFER)
BT IN*1 CLOCK ADJ*2 PLAY MODE INT MUTE*3 AUX+ SETUP AUX+ NAME*4 AUX NAME*5 POWER IC DEMO SUBWOOFER SUBW SYS*6 ILLUMINATI*7 DIMMER*8 SCROLLTYPE TEXT SCR BT IN
Optional adapter cable (RCA pin plugs [red, white] 3.5ø miniplugs) or (3.5ø miniplugs)
*1 Displayed only when INT MUTE is set to OFF, and the mode is set to other than BT AUDIO. *2 Refer to “Setting Time” (page 7). *3 Displayed only when BT IN is OFF. *4 Displayed only when AUX+ SETUP is ON. *5 CDE-103EBT/CDE-102E only. *6 Displayed only when SUBWOOFER is ON. *7 CDE-103EBT only. *8 CDE-103EBT/CDE-102E/CDE-101E only. 3 Turn the Rotary encoder to change the setting. (e.g. Select SUBW ON or SUBW OFF.) 4 Press and hold SOUND/SETUP for at least 2 seconds to return to normal mode.

Bluetooth Setting
SCR TYPE1 / SCR TYPE2 (Initial setting)
Choose from two scrolling methods. Select the type you prefer.
BT ADAPTER / BT OFF (Initial setting)
With Bluetooth technology, you can place a hands-free call by a Bluetooth-equipped mobile phone.
SCR TYPE1: The characters scroll from right to left, a single character at a time. SCR TYPE2: Words are built up from left to right, a single character at a time. When the display is filled, it is cleared and the remaining words are displayed the same way until all words of the title have been shown.
If an optional Buletooth INTERFACE (KCE-400BT) is connected, make this setting when the Bluetooth function is used. For details, refer to the Owner’s Manual of the optional Bluetooth INTERFACE (KCE-400BT). Set ADAPTER when the Bluetooth INTERFACE (KCE-400BT) is connected.
SCR AUTO / SCR MANU (Initial setting)
This CD player can scroll the disc and track names recorded on CD-TEXT discs, as well as the text information of MP3/WMA/AAC files, folder names and tags.
Set ADAPTER when the Bluetooth function is used. For details on the set up procedure, refer to “Bluetooth SETUP” on page 18.
SCR AUTO: The CD text information, the text information of folder and file names, and the tags are scrolled automatically. SCR MANU: The display is scrolled when a disc is loaded or when a track is changed, etc.
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the subwoofer output level.
DEMO ON / DEMO OFF (Initial setting)
1 In the normal mode, press Rotary encoder (AUDIO) repeatedly to select the SUBWOOFER mode.
This unit has a demonstration feature for the display.
SUBWOOFER BASS LEVEL TRE LEVEL BALANCE FADER DEFEAT VOLUME SUBWOOFER
2 Adjust the level by turning the Rotary encoder.
Playing MP3/WMA/AAC Data (PLAY MODE)
SUBW SYS 1 (Initial setting) / SUBW SYS 2
CD-DA (Initial setting) / CDDA/MP3
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc.
volume setting. For example, even at low volume settings, the subwoofer is still audible.
CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
ILUM TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4
You can change the lighting colour of the following four buttons. SOURCE/ , BAND, , .
TYPE1 : When the colour of the four buttons is blue, the colour of the other is red. TYPE2 : When the colour of the four buttons is green, the colour of the other is green. TYPE3 : When the colour of the four buttons is amber, the colour of the other is red. TYPE4 : When the colour of the four buttons is red, the colour of the other is red.
MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device.
DIM AUTO (Initial setting) / DIM MANUAL
Set the DIMMER control to AUTO to decrease the illumination brightness of the unit with the head lights of the vehicle ON. This mode is useful if you feel the unit’s backlighting is too bright at night.

Setting the AUX+ SETUP Mode
POW ON (Initial setting) / POW OFF
AUX+ ON / AUX+ OFF (Initial setting)
When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier.
An external device (such as a portable music player) can be connected to the Full Speed connector of this unit. A conversion cable (KCE-237B) for building up the AUX IN (optional) is required.
POW OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit’s internal amplifier is turned OFF and cannot drive speakers.
A portable music device and an iPhone/iPod cannot be connected to the Full Speed connector at the same time.
AUX+ ON: Set to ON when a portable device is connected. If SOURCE/ is pressed and AUX+ is selected, the sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to ON. Press / /ENT when AUX+ SETUP is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press / /ENT. After that, turn the Rotary encoder to select the desired AUX+ name.
CDE-101E/CDE-101EM:
AUXILIARY*1(Initial setting) / TV / DVD / PORTABLE*2 / GAME
You can change the AUX NAME display in the SETUP mode.
*1 After the setting is completed, AUX is displayed on the unit. *2 After the setting is completed, PMD is displayed on the unit.
POW ON : The speakers are driven by the built-in amplifier.


For details on the control from a Bluetooth compatible device, refer to the Owner’s Manual of the Bluetooth compatible device.
1 Set a Bluetooth connection from a Bluetooth compatible device. 2 The PIN code (“0000”) is displayed on the connected unit.

* This illustrator is CDE-103EBT.P
Bluetooth is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between Bluetooth compatible devices.
The following steps 1 to 4 are common to the various Bluetooth functions. For details, refer to each individual function.
Before using the hands-free phone/audio function, the following settings need to be made. 1 Be sure to set “INT MUTE” to OFF. Refer to the SETUP function on page 15.
BT IN PAIRED DEV* VISIBLE M* AUTO ANS* CLEAR DEV* SEV NAME* MIC INPUT* SPEAKER SL* FW VERSION* FW UPDATE*
* When “BT IN” is set to BT ADAPTER, the above items are displayed. 3 Turn the Rotary encoder to change the settings. 4 Press and hold SOUND/SETUP for at least 2 seconds. The SETUP mode is cancelled.

Displaying the phone service provider name
Select one of 5 connected Bluetooth compatible devices that you previously registered (the fifth registered by guest mode*).
Setting item : SEV NAME The service provider name of the connected Bluetooth compatible device will be displayed. If a Bluetooth compatible device is not connected, “ID UNSENT” will also be displayed.
Turn the Rotary encoder to select a Bluetooth compatible device you want to use (you want to change connection) and then press / /ENT.
You can emphasise or weaken the microphone input volume level.
Setting item : MIC INPUT Turn the Rotary encoder to select the desired volume level (0~7).
* Guest mode: Use this mode for a temporary pairing. Registration (in guest mode) is cancelled once the ignition key goes from ACC to off.
You can select the connected speaker in car to output the sound signal of telephone.
ALL: The sound be output from all of speakers in car. F-L: The sound only be output from the front left speaker. F-R: The sound only be output from the front right speaker. F-LR: The sound be output from the front left and front right speaker.
You can set whether this unit can be recognised or not from a Bluetooth compatible device. Normally set this to VISI M ON.
VISI M ON: Enable recognition of this unit from the Bluetooth compatible device. VISI M OFF: Disable recognition of this unit from the Bluetooth compatible device.
Setting item : FW VERSION The current firmware version will be displayed.
When a call is received, you can set whether to receive it automatically or not.
Setting item: FW UPDATE With this setting, the Bluetooth firmware update function can be activated, but other devices and software may be required. For details, consult ALPINE website.
AT ANS ON: When a call is received, it will be taken automatically. AT ANS OFF: When a call is received, it will not be
received automatically, press to receive a call.
You can delete the history of a previously connected Bluetooth compatible device.
Setting item: CLEAR DEV 1 Turn the Rotary encoder to select the Bluetooth compatible device to be deleted and then press
/ /ENT. 2 Turn the Rotary encoder to select CLEAR YES if you want to delete and then press / /ENT.

Call History is recorded for the last dialed/received/missed calls. There are various ways of making calls based on the “Calling.” The following steps 1 to 5 are common to the various ways of making these calls. For details, refer to each individual category for making calls. 1 Press . The outgoing method list is displayed. 2 Turn the Rotary encoder to select the outgoing mode.
Hands-free calls are possible when using a HSP (Head Set Profile) and HFP (Hands-Free Profile) compatible mobile phone with this unit.
PHONE BOOK DIALED : Dialed history RECEIVED : Received history MISSED : Missed incoming history PHONE BOOK : Mobile phonebook
3 Press / /ENT. The outgoing mode is activated, and each mode list is displayed.
Incoming calls are announced by the received call ring tone and a displayed message (PHONE).
Press . The call starts.
If one name has several numbers registered in the telephone book, press / /ENT after selecting the name*, then turn the Rotary encoder to choose the desired number and press
/ /ENT, the telephone will be called. Press and hold / /ENT for at least 2 seconds after selecting the name, the default number of the name will be called. Depending on the connected mobile phone, this function may not be performed.
* If the name cannot be recognised, default number will be displayed.
Press and hold for at least 2 seconds. The call finishes.
Previously dialed telephone numbers are stored in dialed calls history. You can redial a number by searching from dialed calls history.
You can redial the person you have previously called.
After finishing a call “ ” will be displayed, press within 5 seconds.
Telephone numbers from received calls are stored in the Received List. You can redial these numbers by searching here.
The telephone is redialed.
Telephone numbers for received calls that are missed, are stored in the Missed List. You can redial these numbers by searching here.

USB memory (Optional)
Up to 1,000 telephone numbers are downloadable from a mobile phone. Dial a call by selecting a person from the phone book list.

* This illustrator is CDE-103EBT.
You can call the telephone by performing voice operation. 1 Press and hold /VOICE DIAL for at least 2 seconds. The speak mode is activated, and “SPEAK” is displayed. 2 Say the telephone number, name you want to call into the microphone.
A USB memory device may be connected to this unit. With USB memory connected, playback of files on the device is controlled from this unit.
If you connect a USB memory containing MP3/WMA/AAC, you can play these files on this unit. 1 Press SOURCE/ to switch to the USB AUDIO mode. The mode will change every time the button is pressed.
TUNER DISC USB AUDIO iPod*1/AUX+*2 BT AUDIO*3 AUX*4 TUNER
*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17). *2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17). *3 Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16). *4 Refer to “Using the Front AUX Input Terminal (CDE-103EBT/ CDE-102E only)” (page 15). 2 To pause playback, press / /ENT. Pressing / /ENT again will resume the playback.
While calling, you can adjust the volume.
Turn the Rotary encoder to adjust the volume.
While making a call, this function allows you to initiate the transfer of the audio between the mobile phone and the speakers in the car.
While calling, press and hold / /ENT for at least 2 seconds to switch the call sound between the unit and mobile phone.


Connect USB memory 1 Open the cover of the USB connection terminal. 2 Connect the USB memory directly to the USB connection terminal, or via the USB cable.
This unit USB Connection Terminal

USB memory (Sold Separately)
* This illustrator is CDE-103EBT.
An iPhone/iPod can be connected to this unit by using the proprietary ALPINE FULL SPEED™ Connection Cable (KCE-433iV) (sold separately). When this unit is connected by using the cable, the controls on the iPod are not functional.
Remove USB memory 1 Carefully, pull out the USB memory from the USB cable or the USB connection terminal. 2 Close the cover of the USB connection terminal.
MP3/WMA/AAC files are prepared, then stored to a USB memory. This unit can recognise at least 100 folders (including root folder) and 100 files per folder stored in USB memory. Playback may not be performed if a USB memory exceeds the limitations described above. Do not make a file’s playback time more than 1 hour.
iPhone 3G (version 2.0) iPhone (version 1.1.4) iPod touch (version 1.0.4) iPod classic (version 1.1.1) iPod nano (3 rd generation) (version 1.1) iPod nano (2nd generation) (version 1.1.3) iPod with video (version 1.2.3) iPod nano (1st generation) ( version 1.3.1)
This device can play back USB memory media.
This device supports FAT 12/16/32 for USB memory device.

1 Press /ESC to activate the search selection mode. The “ ” indicator lights up. 2 Turn the Rotary encoder to select the ARTIST search mode, and then press / /ENT.
1 Press SOURCE/ to switch to the iPod mode.
TUNER DISC USB AUDIO iPod*1/AUX+*2 BT AUDIO*3 AUX*4 TUNER
PLAYLIST ARTIST ALBUM SONG PODCAST GENRE COMPOSER AUDIOBOOK PLAYLIST 3 Turn the Rotary encoder to select the desired Artist, and then press / /ENT. 4 Turn the Rotary encoder to select the desired Album, and then press / /ENT. 5 Turn the Rotary encoder to select the desired Song, and then press / /ENT.
*1 Displayed only when the iPhone/iPod is connected and AUX+ SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode” (page 17). *2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting the AUX+ SETUP Mode” (page 17). *3 Only for CDE-102E/CDE-101E/CDE-101EM and BT IN is set to BT ADAPTER. Refer to “Bluetooth Setting” (page 16). *4 Refer to “Using the Front AUX Input Terminal (CDE-103EBT/ CDE-102E only)” (page 15). 2 Press or to select the desired song.
Return to the beginning of the current song: Press .
Fast backward through current song: Press and hold .
Advance to the beginning of the next song: Press .
Fast forward through current song: Press and hold .
3 To pause playback, press / /ENT. Pressing / /ENT again will resume playback.
An iPhone/iPod can contain hundreds of songs. By using file tag information and keeping these songs organized in playlists, this unit’s search functions will ease song searches. Each music category has its own individual hierarchy. Use the Playlist/ Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode to narrow searches based on the table below.
You can search a song from all songs in the iPhone/iPod without selecting an album, artist, etc. 1 Press and hold /ESC for at least 2 seconds to activate the Quick Search mode. The “ ” indicator lights up. 2 Turn the Rotary encoder to select a desired song. The selected song is played back immediately.

For example: Searching by Artist name The following example explains how an ARTIST search is performed. Another search mode can be used for the same operation, although the hierarchy differs.

Random Play Shuffle (M.I.X.)
The unit’s direct search function can be used to search for an album, song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/ PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can quickly target any song.
The Shuffle function of the iPhone/iPod is displayed as on this unit.
Shuffle Albums: The songs on each album are played back in proper order. Upon completion of all the songs on the album, the next album is selected randomly. This continues until all albums have been played.
In the search mode, press any one of the preset buttons (1 through 6) to quickly skip over a designated percent of your song content. Song search example: If there are 100 songs in your iPhone/iPod, they are divided into 6 groups using percentages (shown below). These groups are assigned to the preset buttons (1 through 6).
Shuffle Songs: Song shuffle randomly plays back songs within a selected category (playlist, album, etc.). The songs within the category are played just once until all songs have been played. 1 Press 5 . The songs are played back in random sequence.
Example 1: Suppose the song you are searching for is located at around the middle (50%) of your library: press button 4 to jump to the 50th song and turn the Rotary encoder to find the desired song.
(off) (Shuffle Albums) (Shuffle Songs)
Example 2: Suppose the song you are searching for is located near the end (83%) of your library: press button 6 to jump to the 83rd song and turn the Rotary encoder to find the desired song.
2 To cancel M.I.X. play, select (off) with the above procedure.

All 100 songs (100%) 0% 17% 33% 50% 67% 83% Preset buttons 1 2 3 4 5 6
Shuffle ALL: Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one song does not play back again until all songs have been played back. 1 Press 6. The songs are played back in random sequence.
2 To cancel M.I.X. play, select (off) with the above procedure.
Playlist/Artist/Album/Genre/Composer can be easily changed. For example, if you listen to a song from a selected album, the album can be changed.
Press 1 or 2 to select the desired Playlist/Artist/ Album/Genre/Composer.
(off) (Shuffle ALL)

Only Repeat One is available for the iPhone/iPod.
Repeat One: A single song is repeatedly played back. 1 Press 4. The song is played back repeatedly.
2 To cancel repeat play, select (off) with the above procedure.
You can display the tag information of a song in the iPhone/iPod.
Press VIEW. Each press changes the display.
TRACK NO./ELAPSED TIME TRACK NO./CLOCK ARTIST NAME* ALBUM NAME* SONG TITLE* TRACK NO./ELAPSED TIME
* TAG information “ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag information.
(off) (Repeat One)

CD Player not functioning. • Out of operating temperature range +50°C (+120°F) for CD. - Allow the vehicle’s interior (or trunk) temperature to cool.
CD playback sound is wavering. • Moisture condensation in the CD Module. - Allow enough time for the condensation to evaporate (about 1
If you encounter a problem, please turn the power off, then on again. If the unit is still not functioning normally, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.
hour).
No function or display. • Vehicle’s ignition is off. - If connected following instructions, the unit will not operate
the CD Player Operation section.
Unable to fast forward or backward the CD. • The CD has been damaged. - Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
necessary. • Internal micro-computer malfunctioned due to interference noise etc. - Press the RESET switch with a ballpoint pen or other pointed
article.
Unable to receive stations. • No antenna or open connection in cable. - Make sure the antenna is properly connected; replace the
your nearest Alpine dealer.
CD playback sound skips without vibration. • The disc is dirty or scratched. - Clean the disc; damaged disc should be replaced.
antenna or cable if necessary.
Error displays (built-in CD player only). • Mechanical error. - Press . After the error indication disappears, insert the disc again. If the above-mentioned solution does not solve the problem, consult your nearest Alpine dealer.
properly grounded at its mounting location. • The antenna may not be the proper length. - Make sure the antenna is fully extended; if broken, replace the
CD-R/CD-RW playback not possible. • Close session (finalisation) has not been performed. - Perform finalisation and attempt playback again.
antenna with a new one.
MP3, WMA or AAC is not played back. • Writing error occurred. The MP3/WMA/AAC format is not compatible. - Make sure the MP3/WMA/AAC has been written in a
location.
supported format. Refer to “About MP3/WMA/AAC” (pages 10-11), then rewrite in the format supported by this device.

Indication for USB memory
The sound is not output from the speakers. • Unit has no output signal of the internal amplifier. - POWER IC is switched to “POW ON” (page 17).
iPod does not play and no sound is output. • The iPod has not been recognised. - Reset this unit and the iPod. Refer to “Initial System Start-Up”
(page 6). To reset the iPod, refer to the Owner’s Manual of the iPod.
Indication for CD Player
the cable is not excessively bent.
Press the button again for at least 2 seconds. If the disc still does not eject, consult your Alpine dealer.
button for a few times, consult your Alpine dealer.
supported by the unit.

“Connections”). Make sure the cable is not bent excessively.
and this unit, using the iPhone/iPod cable.
this unit.
(page 17). If the above solution does not work, consult your nearest dealer.

Specifications
Power Requirement 14.4 V DC (11-16 V allowable) Maximum Power Output 50 W × 4 Maximum Pre-Output Voltage 2 V/10 k ohms Bass ±14 dB at 100 Hz Treble ±14 dB at 10 kHz Weight 1.5 kg (3 lbs. 4 oz)
Tuning Range 87.5-108.0 MHz Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.0 dB
Width 178 mm (7") Height 50 mm (2") Depth 161 mm (6-3/8")
Tuning Range 531-1,602 kHz Sensitivity (IEC Standard) 22.5 µV/27 dB
Width 170 mm (6-3/4") Height 46 mm (1-13/16") Depth 25 mm (1")
Frequency Response 5-20,000 Hz (±1 dB) Wow & Flutter (% WRMS) Below measurable limits Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz)
Wave length 795 nm Laser power CLASS I
USB requirements USB 1.1/2.0 Max. Power Consumption 500 mA USB Class Mass Storage File System FAT 12/16/32 MP3 Decoding MPEG-1/2 AUDIO Layer-3 WMA Decoding Windows Media™ Audio AAC Decoding AAC-LC format “.m4a” file Number of Channels 2-Channel (Stereo) Frequency Response* 5-20,000 Hz (±1 dB) Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate.
Bluetooth Specification Bluetooth V 2.0 Output Power +4 dBm Max. (Power class 2) HFP (Hands-Free Profile) HSP (Head Set Profile)

Before installing or connecting the unit, please read the following and pages 3 to 5 of this manual thoroughly for proper use.
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done.
MAKE THE CORRECT CONNECTIONS. Failure to make the proper connections may result in fire or product damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURELY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failure.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange wiring and cables in compliance with the manual to prevent obstructions when driving. Cables or wiring that obstruct or hang up on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. Avoid installing the unit in locations with high incidence of moisture or dust. Moisture or dust that penetrates into this unit may result in product failure. Precautions
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR SHIFT LEVER. Doing so may obstruct forward vision or hamper movement etc. and results in serious accident.

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.

Connect each input lead coming from an amplifier to the corresponding output lead coming from the left rear of the CDE-103EBT/CDE-102E/CDE-101E/ CDE-101EM. Connect all other leads of the CDE-103EBT/CDE-102E/CDE-101E/CDE-101EM according to details described in the CONNECTlONS section. 3 Slide the CDE-103EBT/CDE-102E/CDE-101E/ CDE-101EM into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel.
When you install this unit in your car, do not remove the detachable front panel. If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.
This unit Pressure Plates*
* If the installed mounting sleeve is loose in the dashboard, the pressure plates may be bent slightly to remedy the problem.
Screws (M5 × 8) (Included)
Remove the mounting sleeve from the main unit (see “Removal” on page 31).

Secure the ground lead of the unit to a clean metal spot using a screw
(*3) already attached to the vehicle’s chassis.


*1 When Subwoofer is OFF: Output is for Rear speakers. When Subwoofer is ON: Output is for Subwoofer. *2 When Subwoofer is OFF: Output is for Front speakers. When Subwoofer is ON: Output is for Subwoofer. For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 16.

Left Rear (+) Speaker Output Lead (Green)
Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable.
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Front Output RCA Connectors (CDE-103EBT/ CDE-102E only) RED is right and WHITE is left.
Remote Turn-On Lead (Blue/White) Connect this lead to the remote turn-on lead of your amplifier or signal processor.
Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio interface output of a cellular phone which provides ground shorting when a call is received.
Front/Subwoofer Output RCA Connectors (CDE-101E/CDE-101EM only) RED is right and WHITE is left.
MIC Input Connector (CDE-103EBT only) To Microphone.
Illumination Lead (Orange) This lead may be connected to the vehicle’s instrument cluster illumination lead. This will allow the backlighting of this unit to dim whenever the vehicle’s lights are turned on.
Full Speed Connector Control iPhone/iPod signals. Connect this to an iPhone/iPod by using FULL SPEED™ Connection Cable (KCE-433iV) (sold separately) or to an external device (such as a portable player) by using conversion cable (KCE-237B) for building up the AUX IN (sold separately).
Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+)12V only when the ignition is turned on or in the accessory position.
Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle’s battery.
AUX+ ON : When the external device is connected. AUX+ OFF : When an iPhone/iPod is connected.
Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
You can also connect this to an optional Bluetooth INTERFACE (KCE-400BT) (CDE-102E/CDE-101E/CDE- 101EM only). To use a hands-free mobile phone, an optional Bluetooth INTERFACE (KCE-400BT) connection is required. For details on connection, refer to the Owner’s Manual of the Bluetooth INTERFACE (KCE-400BT).
Right Front (+) Speaker Output Lead (Grey)
Right Front (–) Speaker Output Lead (Grey/Black)
FULL SPEED TM Connection Cable (KCE-433iV) (sold separately)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
KCE-400BT Connection Cable (Included with KCE-400BT)
Front AUX Input Terminal (CDE-103EBT/CDE-102E only) This terminal allows for input of audio from an external device (such as a portable player), using a commercially- available converter cable.
USB Connection Terminal Connect USB memory (sold separately)
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.