Instruction/ maintenance manual of the product C-1000 Winegard
Go to page of 46
O mobile entertainment system Model C-1000 TM.
1 T able of Contents W elcome ................................................... 2 Product R egistration .................................. 3 What is Mobile Digital TV? ........................ 4 CIOtv TM P arts List .................................
2 W elcome CIOtv by Winegard is a Multi-Standard Entertainment System specifically designed to OEM automotive standards. Designed to OEM standards means that CIOtv is built to the same quality standar.
3 • If you remove or dismount your CIOtv from the provided headrest mounting system (AutoMount), always remove and stow the bracket assembly . A warning label is provided in two locations on the headrest bracket assembly . F ailure to do so may result in head injury .
4 What is Mobile Digital TV ? CIOtv is equipped with the latest in digital television technology . Just like your home television, your CIOtv television experience is digital. But that ’s where the comparison stops. The CIOtv receiver can operate while you or your vehicle is in motion.
5 CIOtv P arts List The CIOtv Entertainment System consists of the following parts: 1. CIOtv 10.2” TFT Viewer 2. CIOtv AutoMount with wiring harness 3. Remote Control 4. IR Headphones (C-2510) 5. AV AUX Input Cable (C-2545) 6. Owner ’s Manual 7. Four (4) ea.
6 Right Side View DVD Left Side View AUX Input Headphones DC P ower In iP od / iPhone SD Card Slot T op View USB P orts DVD Eject Button P ower Light Sensor IR Receiver (Infrared Remote Control) 4 Red LED’s (IR T ransmitter) These sensors control the CIOtv operation.
7 CIOtv Optional Accessories: Available from www .winegard/ciotv .com 1. Battery P ack (C-2401) 2. 14V AC/DC Converter (C-2520) 3. iP od Accessory Cable (C-2530) 4.
8 Using Y our CIOtv AutoMount CIOtv comes equipped with a convenient automotive headrest mounting system designed to fit a wide range of vehicle types and models. While Winegard makes no guarantee that the CIOtv will fit your vehicle, check the dimensions of your headrest posts before attempting to install the CIOtv AutoMount.
9 CIOtv AutoMount Assembly T ools needed for assembly: 1. #1 Phillips head screwdriver 2. 3mm hex head key or hex head sock et wrench AutoMount Assembly with CIOtv Viewer AutoMount Bracket Assembly Openings for Headrest P osts AutoMount Clamp Assembly NOTE: The AutoMount Bracket Assembly is designed to plug into the AutoMount Clamp Assembly .
10 Getting Started Software Updates: CIOtv is an entertainment computer that depends on complex software to run and process the available audio and video options. T o insure that you have the latest CIOtv software, refer to Setup/ System Information from the CIOtv Home Screen.
11 5. The second and last step of the update process is the programming of the CIOtv internal memory with the data from the file that was loaded to the CIOtv in the first step. This will progress from the 0% to 100%. 6. When the update is complete, the screen will say “CIO update complete”.
12 1. If installed in your vehicle, turn vehicle ignition to ACC (accessory) or Start the engine. CIOtv will operate in the ACC position but may deplete your vehicle battery unless the engine is running. 2. Press the POWER button on the upper top left corner of CIOtv .
13 • For Wireless Headphones touch the headphones icon at the top of CIOtv Home Screen. Select Channel A or B. Select Done. On your wireless headphone set select either channel A or B to match the selection you just made on the CIOtv Home Screen.
14 Caution: Always remember to check sound levels before putting on headphones or allowing use by children. ! 4. Select the video source icon of choice. Y ou can always go back through the Home Screen menu or select the Home icon at the far left of the screen.
15 CIOtv Home Screen - Entertainment Options T ap an icon to select your entertainment option. See detailed operating instructions for each entertainment option below . Remote Control Layout and Operation An IR sensor is located in the front panel of CIOtv .
16 P ower Dash Mute DVD Menu V olume Up V olume Down Home Screen Icons DVD Controls FM Modulator TV Channel Scan TV Channel List Subtitles TV Channel Recall Directional Navigation Arrows (Up/Down/Left.
17 Using Mobile TV Select the TV icon from the CIOtv Home Screen. The TV screen will appear . If no channels appear on the station list, you will first need to scan for available TV channels in your area. Select the Channel Scan icon from the lower right corner .
18 Y ou can connect your iPod or iPhone to CIOtv in several ways: 1. T o fully utilize CIOtv ’s iP od on- screen control and playback feature, connect using the optional CIOtv iPod cable (p/n C-2530). This will allow you to stow away and operate your device from the CIOtv Home Screen.
19 3. If you don’t have a special connector cable, you can always connect your iP od to CIOtv via one of the USB ports by using the standard 30 pin/USB connector cable supplied with your iP od or iPhone.
20 When music selections are playing, these screens appear: Games/AUX Input Aux Input Mode: CIOtv can display auxiliary analog A/V input supplied through the 3.5mm jack and composite adapter cable (supplied). Insert the 3.5mm connector into the AUX Input jack on the left side of CIOtv .
21 Companion CIOtv Mode. When the companion video cable is connected through the CIOtv AutoMount vehicle harness, you can view A/V content produced and displayed on your other (Companion) CIOtv . This allows you to share DVD or other A/V content. T o activate the Companion CIOtv mode: 1.
22 Basic DVD Operation The CIOtv DVD system is designed specifically for automotive use where road vibration, shock and extreme environmental conditions may exist. While the OEM grade DVD drive mechanism and laser reader are very robust, a little care will go a long way to ensure years of trouble free use.
23 CAUTION: Inserting hands, fingers, or foreign objects in Disc insertion slot may result in personal injury or product damage. Do not attempt to insert more than one disc at a time.
24 Play/P ause: T oggles the DVD player between Play and Pause. PLA Y/P AUSE button resumes playback from position at which it was stopped. Next: Goes to beginning of next chapter . FF: Advances DVD play . Each touch increases speed of FF (2X , 4X, 8X, 16X).
25 CAUTION: Attempting to play a cracked, warped, irregularly shaped, or damaged disc could severely damage the DVD Player playback mechanism. ! DVD Software Updates: While the CIOtv DVD comes from the factory ready to play , you may find it necessary to update or re -load the software that supports the DVD drive.
26 2. Copy the latest firmware version from the Winegard website to your SD card at the top level directory (i.e. not in a sub directory). File will be named DvdUpdate.rom 3. Insert SD card into CIOtv – then turn power on. 4. After the Boot-up process, you will be prompted from the CIOtv Home Screen that a DVD upgrade object has been found.
27 Y our CIOtv is equipped with two (2) high speed USB Host Ports located in the recessed area at the top of your device and an SD card reader (1) located on the left side of CIOtv . Y ou may use standard USB devices or SD card storage media to play audio, video and photo files on your CIOtv .
28 Previous: Displays previous photo. Play/P ause: Play or pause slide show of photos in thumbnail group. Next: Displays next photo. Internet CIOtv is equipped with a Wi-Fi receiver capable of connecting your device to the internet.
29 Setup Screen The following Setup Screen icons allow you to setup, adjust, enable or calibrate your CIOtv . TV – CIOtv is equipped with both an internal and external MDTV antenna.
30 Wireless Headphones – T o enable wireless headphones for use with your CIOtv , select the Wireless headphones icon and then select the desired IR channel - Channel A , Channel B or Headphones off. At the same time, remember to set your Wireless headphones to the corresponding channel using the three way selector switch on the headphone set.
31 Wi-Fi / Network – Select Network to set up Wi-Fi and IP addresses. T o connect to the internet, you must select a Wi-Fi network, access, point and configure your CIOtv for network connection. First, select IP from the Network menu. For automatic IP network configuration (recommended), select Use DHCP (Dynamic Host Configuration Protocol).
32 Note: CIOtv supports WP A , WP A2 and WEP 64/128-bit wireless security protocols. (Enterprise versions are not supported). Clock – T o set time and date options, select the Clock icon and set values using the touchscreen controls. Select Done when complete.
33 Wireless Headphones CIOtv wireless headphones receive sound signals via an infrared light beam transmitted from LED’s located in the CIOtv touchscreen. IR headphones operate in a line -of- sight orientation with the infrared LED transmitter on the top edge of the CIOtv screen.
34 An Auto- Off P ower-Saver feature automatically switches headphones ‘off ’ 5 minutes after reception of the last detected infrared transmission signal to help conserve battery power . P osition 2 and 3 switches audio reception between Channel A and Channel B.
35 Aux Audio Out – A 3.5mm jack is located at the lower edge of the right side ear phone. This jack will allow transmission of audio signals at line level if desired for additional devices. Inserting Batteries: Remove battery compartment cover by pushing tab in and lifting cover off at the same time.
36 Care and Maintenance CIOtv is a complex digital device. Winegard recommends that you treat CIOtv just as you would a laptop or other hand-held digital devices including cell phones, MP3 players, etc. CAUTION: 1. Do not immerse CIOtv in water or expose to excessive moisture.
37 Specifications V ehicle Safety Standards: FMVSS 201 Occupant Protection in Interior Impact FMVSS 202 Head Restraints FMVSS 207 Seating Systems FMVSS 210 Seat belt assembly anchorages FMVSS 302 Flammability DVD Laser Safety Standards: EN 60825-1:2007 Edition 2 Safety of laser products 21 CFR 1040.
38 Headphones (con’t.): F requency response: +/-2dB within specified bandwidth Sound pressure level: 100dB max Carrier frequency: Channel A: 2.3MHz (left) / 2.
39 FM Modulator (con’t.): F requency response: +/-2dB within specified bandwidth Carrier frequency: 88.3 to 107.9 MHz Modulation: FM wideband, +/-75KHz max center frequency deviation R adiated outpu.
40 LCD P anel: Display T ype: AM TFT Viewing area: 10.2 inch diagonal Resolution: 800x480 RGB Aspect ratio: 16:9 Contrast R atio: 300:1 minimum Brightness: 350cd/m^2 minimum Viewing angle: 130° horiz.
41 SD card slot: Media: Full-size SD, miniSD (with adapter), microSD (with adapter), MMC File system: F A T Video decode: MPEG -4, WMV Picture decode: JPEG , BMP , PNG, GIF Audio decode: AAC, MP3, WMA.
42 W arranty Statement WINEGARD COMP ANY CIOtv ™ ONE YEAR LIMITED W ARRANTY ( NONTRANSFERABLE) T erms of Warranty Winegard Company (the Company) warrants to the original retail purchaser , that the .
43 EXCEPT AS EXPRESSL Y SET FORTH IN THIS W ARRANTY , THE COMP ANY MAKES NO OTHER W ARRANTIES, EXPRESSED OR IMPLIED , INCLUDING ANY IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE. THE COMP ANY EXPRESSL Y DISCLAIMS ALL WARRANTIES NOT ST A TED IN THIS LIMITED W ARRANTY .
44 FCC Statement Changes or modifications to this product that are not expressly approved by Winegard Company could void the user ’s authority to operate this equipment.
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 • www .winegard.com © 2011 Winegard Company • 2452221 REVJ 4/11.
An important point after buying a device Winegard C-1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard C-1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard C-1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard C-1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard C-1000 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard C-1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard C-1000.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard C-1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard C-1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
