Instruction/ maintenance manual of the product Sabre Trim Flymo
Go to page of 10
IMPOR T ANT INFORMA TION Read before use & retain for future reference For all customer enquiries or for replacement parts, contact:- ☎ ☎ 01325 300303 www .
Carton Contents IMPOR T ANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY P AR TS ARE MISSING CONT ACT :- Husqvarna Outdoor Products Customer Service.
General 1. Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator .
Assembly Instructions con’t Attatching the T rimmer Head to the Sabre Handle 1. Push the T rimmer Head onto the Sabre Handle until you hear a click. (E1) 2. Push the T rimmer Head further onto the Sabre Handle until it reaches the mark shown in Fig E2 .
Auto Line Feed System H line cutter How the automatic line feed works (H) 1. When initially switching on the trimmer , a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter . DO NOT BE ALARMED this is quite normal.
How to trim and edge • WARNING • The use of eye pr otection is recommended. Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer .
Cutting Head T o r emove spool cap 1. Press and hold in the two cap release latches. (T). 2. Pull cap away from the spoolholder . (T). When r efitting the spool cap 1. Keep all areas of the cap and spoolholder clean. Failure to do so may prevent the cap being securely located in the spoolholder .
Maintenance X2 X1 • WARNING Cutting head continues to rotate after the trim- mer has been switched off. Keep fingers and hands clear of the line cutter on leading edge of guard. Caring for your product After you have finished using your product follow the pro- cedure below: 1.
Fault Finding Chart F AUL T CHECK ACTION Is the automatic line feed work- ing? Manually feed out line. SEE “MANUAL LINE FEED” Is the line fed out and visible? Has line been removed from cleat? Remove cap and spool, free line and re-fit spool and cap.
5107422-01 Husqvarna Outdoor Products Aycliffe Industrial Park NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339 UK Customer Helpline - 01325 300303.
An important point after buying a device Flymo Sabre Trim (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo Sabre Trim yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo Sabre Trim - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo Sabre Trim you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo Sabre Trim will certainly help you make a decision on the purchase.
If you already are a holder of Flymo Sabre Trim, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo Sabre Trim.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo Sabre Trim. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo Sabre Trim along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
