Instruction/ maintenance manual of the product 420 Flymo
Go to page of 9
For all customer enquiries or for replacement parts, contact:- 01325 300303 www .flymo.com customer .services@husqvarna.co.uk EasiCut 420/EasiCut 450/ EasiCut 500/EasiCut 510 EasiCut 600XT IMPOR T.
Carton Contents IMPORT ANT ! Please check the contents of the carton are correct BEFORE assembling your new product. IF ANY P ARTS ARE MISSING CONT ACT :- Husqvarna UK Ltd.
If not used properly this product can be dangerous! This product can cause serious injury to the operator and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warning and safety instructions in this manual and on the product.
Safety cont’ use. Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc.
CABLES IMPORT ANT • Use only 1.00mm 2 size cable up to 40 metres length maximum. Maximum rating : 1.00mm 2 size cable, 10 amps 250 volts AC. • YOUR HEDGETRIMMER IS SUPPLIED WITH CABLE WIRED DIRECTL Y INTO THE PRODUCT . 1. Mains Cables and Extension Cables are available from your local Approved Service Centre.
B1 B2 D Before Use B3 C1 C2 Before starting your hedge trimmer . • Securing the cable in the Belt Clip helps keep the cable away from blade. 1. Push up the hook on the Belt Clip (B1) 2. Place the rear section of the Belt Clip behind your belt (B2) 3.
How to Use Caring for your Hedgetrimmer Fault Finding Hints Fails to Operate 1. Is the Power Turned On? 2. Check the fuse in the plug, if blown replace. 3. Fuse continues to blow? Immediately disconnect from the mains electricity supply and consult your local approved Service Centre.
• Awareness of the environment must be considered when disposing of ʻend-of-lifeʼ product. • If necessary , contact your local authority for disposal information. The symbol on the product or on its packaging indi- cates that this product may not be treated as household waste.
Husqvarna UK Ltd. Aycliffe Industrial Park NEWTON A YCLIFFE Co.Durham DL5 6UP ENGLAND T elephone - 01325 302302 Fax - 01325 310339 Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
An important point after buying a device Flymo 420 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo 420 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo 420 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo 420 you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo 420 will certainly help you make a decision on the purchase.
If you already are a holder of Flymo 420, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo 420.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo 420. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo 420 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
