Instruction/ maintenance manual of the product Mini Trim Flymo
Go to page of 8
IMPOR T ANT INFORMA TION Read before use & retain for future reference For all customer enquiries or for replacement parts, contact:- ☎ ☎ 01325 300303 www .
1 Carton Contents IMPOR T ANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY P AR TS ARE MISSING CONT ACT :- Electrolux Outdoor Products Customer Service Department direct T elephone : 01325 300303, Fax : 01325 318193 Safety General 1.
2 4. Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is dam- aged. Do not touch the electric cable until the elec- trical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one.
3 Assembly Instructions Shaft Assembly (A) 1. Locate the lower shaft (A1) into the upper shaft (A2) . 2. Grasp firmly and hold steady the lower shaft. Locate the upper shaft and snap together firmly . • The unit is correctly assembled when the gap between the upper and lower shaft has been closed.
4 T o feed the nylon line 1. Press and hold the two latches (H) . 2. Gently pull the line until it reaches the line cutter. 3. Release the two latches. Check that the spool is locked in position. 4. If too much line has been fed out, press the two latches and turn the spool anti-clockwise until the line is at the desired length.
5 Automatic Line Feed System How the automatic line feed works (M) 1. When initially switching on the trimmer , a small length of line is fed out. 2. A ‘clattering’ noise will be heard when the nylon line hits the line cutter . DO NOT BE ALARMED this is quite normal.
6 Maintenance Environmental Information After you have finished using your Flymo Mini-Trim follow the procedure below: 1. Disconnect from the mains electricity supply . 2. Never clean your trimmer with water, cleaning flu- ids, or solvents, just remove debris with a suitable tool, a soft brush or dry cloth.
Newton Aycliffe, 06/05/2003 M. Bowden, Research & Development Director A D 93 dB(A) E 91 dB(A) F 77.4 dB(A) G 4.59 m/s 2 H 2.1 kg ET21 A D 93 dB (A) E 91 dB (A) F 82.9 dB(A) G 4.85 m/s 2 H 2.5 kg ET23DX A D 93 dB (A) E 91 dB (A) F 82.9 dB(A) G 4.85 m/s 2 H 3.
An important point after buying a device Flymo Mini Trim (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Flymo Mini Trim yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Flymo Mini Trim - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Flymo Mini Trim you will learn all the available features of the product, as well as information on its operation. The information that you get Flymo Mini Trim will certainly help you make a decision on the purchase.
If you already are a holder of Flymo Mini Trim, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Flymo Mini Trim.
However, one of the most important roles played by the user manual is to help in solving problems with Flymo Mini Trim. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Flymo Mini Trim along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
