Instruction/ maintenance manual of the product 611 Series Ives
Go to page of 2
829172-00(0) © 2006 Ingersoll-Rand Comp any Limited 61 1 and 71 1 Series Swing Clear Continuous Hinges Mark frame hole locations. 1 Mount hinge to door . 2 Mount door to frame 3 Check for proper operation. 4 Determine TOP of hinge using door and frame as guide.
Page 2 of 2 829172-00(0) Instructions for Cutting Hinge Determine hinge height. 1 Mark hinge for cutting. 2 Cut hinge. 3 Shorten hinge pin 3/4. 4 Insert top and bottom tip. 5 Measure height of opening from finished floor to underside of door frame header .
An important point after buying a device Ives 611 Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ives 611 Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ives 611 Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ives 611 Series you will learn all the available features of the product, as well as information on its operation. The information that you get Ives 611 Series will certainly help you make a decision on the purchase.
If you already are a holder of Ives 611 Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ives 611 Series.
However, one of the most important roles played by the user manual is to help in solving problems with Ives 611 Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ives 611 Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center