Instruction/ maintenance manual of the product 1434, 1444, 1452 Graco
Go to page of 7
234 © 1998 Graco 131-6-98 IS2417 Failure to follow these warnings and the assembly instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use seat belt. STRANGULA TION HAZARD: DO NOT place swing in any location where there are cords, such as window blind cords, drapes, phone cords, etc.
234 © 1998 Graco 131-6-98 IS2417 Failure to follow these warnings and the assembly instructions could result in serious injury or death. Avoid serious injury from falling or sliding out. Always use seat belt. STRANGULA TION HAZARD: DO NOT place swing in any location where there are cords, such as window blind cords, drapes, phone cords, etc.
5 131-6-98 IS2417 6 8 7 Attaching the Legs Step 1. The four legs have a double button at one end and a single button beneath it. With the hub sides facing up, place the motor housing and pivot housing on the floor . Position legs so their single buttons also face up.
5 131-6-98 IS2417 6 8 7 Attaching the Legs Step 1. The four legs have a double button at one end and a single button beneath it. With the hub sides facing up, place the motor housing and pivot housing on the floor . Position legs so their single buttons also face up.
9 131-6-98 IS2418 10 1 1 12 Using the T r ay Step 1. Unlatch the tray by squeezing the two latches under the tray at the same time, and lift up. Be careful not to let the tray hit your baby when lifting or closing the tray . Step 2. T o latch tray , push it down firmly .
9 131-6-98 IS2418 10 1 1 12 Using the T r ay Step 1. Unlatch the tray by squeezing the two latches under the tray at the same time, and lift up. Be careful not to let the tray hit your baby when lifting or closing the tray . Step 2. T o latch tray , push it down firmly .
13 131-6-98 IS2418 14 Replacement Parts Instructions for ordering swing parts: Complete form below . Y our swing model number MUST be included on the form to ensure proper replacement parts. Y our model number can be found on a sticker beneath the swing motor .
An important point after buying a device Graco 1434, 1444, 1452 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 1434, 1444, 1452 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 1434, 1444, 1452 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 1434, 1444, 1452 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 1434, 1444, 1452 will certainly help you make a decision on the purchase.
If you already are a holder of Graco 1434, 1444, 1452, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 1434, 1444, 1452.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 1434, 1444, 1452. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 1434, 1444, 1452 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
