Instruction/ maintenance manual of the product MG2000TM Faria Instruments
Go to page of 20
MG2000 ™ Speedometer IS0209 rev . B ecr#5668 08/2005 Owner ’ s Manual.
1 2 / 19/ 20 05.
Index Description Figure 1 - Default Screens page 1 Description page 1 Normal Mode page 2 Contrast and Lighting page 2 Displayed Functions page 2 LCD Display Screens page 3 Screen 1 page 3 Screen 2 pa.
.
Pag e 1 MG2000 Speedometer Manual The MG2000 ™ Speedometer combines the features of a speedometer and several digital instruments into one unit: • The MG2000 ™ Speedometer is analog in appearance but is driven by a stepper motor for digital accuracy .
Pag e 2 turned on, the unit enters a “Self T est” mode. The screen will display “The Self T est Mode Is In Operation” for 10 seconds. The warning lights and back lights will flash. When this is complete, the user selected “Default” screen will appear .
Pag e 3 Displayed Functions MG2000 ™ Speedometer The MG2000 ™ Speedometer is a digital instrument with the appearance of an analog instrument. The MG2000 ™ Speedometer receives it’s input from a paddle wheel speed sensor OR a pitot pressure input.
Pag e 4 Heading Displays the GPS heading received from the GPS NMEA0183 signal (if installed and connected). The display will be in “TRUE” or “MAG” heading based on the “SET GPS COG DISPLA Y” setting selected in the edit mode.
Pag e 5 Normal Mode Increase/decrease contrast Use to move between screens. (See Figure 2) Edit Mode T o change Edit F u nction Use to move between Edit Functions. 4 sec. Auto Return 40 sec. Auto Return and or or or or 2 sec. Use to change settings. Select Mode 1.
Pag e 6 Fuel Functions Fuel Level Sender This display is the equivalent of a standard fuel gauge and should be used as the reference for the fuel remaining. Each filled block represents 1/8 of a tank and when the fuel tank is empty only empty blocks will be displayed.
Pag e 7 COG (Course Over Ground) If deviation information is not available from the connected GPS, the COG display will default to the display shown at left.
Pag e 8 Edit Mode The “Edit” mode is used to adjust or set the values of functions and options in the MG2000 Speedometer . The procedure below specifies the steps to be taken in the “Edit” mode to adjust / set each option.
Pag e 9 Press and hold the “Up” and “Down” for 2 seconds to reset “T rip Log” to zero (0). Automatically resets trip log to zero and returns to “Edit mode.” Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode.
Pag e 10 Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. Speedometer Calibration 1 Speedometer Calibration 2 3 Press and hold the “Up” and “Down” for 2 seconds to select “Speedometer Calibration.
Pag e 1 1 Adjust Clock Offset 1 Set Clock Offset 2 3 Press and hold the “Up” and “Down” for 2 seconds to select “Clock Offset.” Press “Up” or “Down” to select another function or “Mode” to return to “Normal” mode. OR Press “Up” or “Down” while observing clock.
Pag e 12 Select “Self T est” 1 Select Self T est 2 3 Press and hold the “Up” and “Down” for 2 seconds to select “Self T est.” Press “Up” or “Down” to select another function.
A vailable Functions for Display in MG2000 Speedometer Screens The functions listed below can be displayed in the user configured screens. All of the functions may not be available in your installation. If a function is selected for display and that function does not appear on the screen, the function does not exist in this installation.
N o tes:.
.
Copyright 2005 by the Thomas G. Faria Corporation, Uncasville CT No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the company . Faria® is the trademark of the Thomas G.
An important point after buying a device Faria Instruments MG2000TM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Faria Instruments MG2000TM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Faria Instruments MG2000TM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Faria Instruments MG2000TM you will learn all the available features of the product, as well as information on its operation. The information that you get Faria Instruments MG2000TM will certainly help you make a decision on the purchase.
If you already are a holder of Faria Instruments MG2000TM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Faria Instruments MG2000TM.
However, one of the most important roles played by the user manual is to help in solving problems with Faria Instruments MG2000TM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Faria Instruments MG2000TM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
