Instruction/ maintenance manual of the product HYDRA STEAMER SC412 Euro-Pro
Go to page of 15
HYDRA STEAMER 1500 Watt Model SC412 USE & CARE INSTRUCTIONS Congratulations! You are the own er of the ultimate in modern Vapor Steam Cleaning equipment. To fully enjoy the advantages of your appliance , please take a few minutes to read all the “Use & Ca re Instructions ” and keep the instructions handy for ready re ference.
IMPORTANT SAFEGUARDS When using your DELUXE HYDRA STEAMER , basic safety precautions should always be observed, including the followi ng: 1. Read all instructions before using Deluxe Hydra Steamer. 2. Use the system only for its in tended use. 3. To protect against a risk of electric shock.
IMPORTANT SAFEGUARDS Continued SPECIAL INSTRUCTIONS 1. To avoid circuit overload, do not operate another appliance on the same socket (circuit) 2. I f an extension cord is absolutely necessary, a 15 amper e 14 gage cord should be used . Cords rated for less amperage may overheat.
DELUXE HYDRA STEAMER Model SC412 110 volts, 1500 watt 1 - Safety Cap for Steam Generator / Water Tank 2 - Push On/Off Switch for the System 3 - Steam On Light 4 - Add Water Light 5 - Power Cord 6 - St.
8 9 10 11 12 13 14 List Of Accessories Packed With Unit 8 - Extension Tubes 9 - Rectangular Brush for Floor 10 - Angle Adapter 11 - Glass & Tile Squeegee 12 - Detail Cleaning Attachment (on the photo small brush is attached) 13 - Small Nylon Detail Brush (2) 14 - Water Filling Funnel Technical Specifications Voltage: 110V 60Hz.
Operating Instructions - Components On/Off Swit ch: The unit is “On” when th e switch (#2) is in the “Pushed down” position. The unit is “Off” when the switch is in its “Up” position. Safety Cap (#1) In order to open the Safety Cap, first press it down and then turn counter clockwise.
Filling Your Steam Generator With Water (continued ) Step 4: Allow approximately 10 minutes for vapor to reach its working temperature and pressure. When these have been reached, the Yellow indicator (#3) will light. The machine is ready to operate. Step 5: Add desired attachments.
Using Your Accessories Attaching the extension tub es (#8) to the Pi stol Grip (with On/Off St eam Control) a nd to the other accessories. Extension Tubes (#8) To insert the extension pipes (#8) one in the othe r, in the flexible pipe grip and in the a ttachments, pr ess the knob ensuring that it fits into the hole.
Attachments Brush for hard floors (#9). 100% white terry cloth towel can be fitted on this brush as to absorb the dirt and pro tect delicate surfaces. It can also be used on vertical washable surfaces following the same procedure a s for th e floor. Important: Please note that bristles may break through thin towels.
How to fit the Towel Over the Recta ngular Brush (#9) cont. Fig. E 6. Place the towel around the brush, and repeat folding th e towel as shown in Fig. E. When folding the towel, leave some slack. Do not pull tightly around the brush , leave some looseness.
Tips On How To Use Your System Wate r • Use tap water for all your cleaning needs. • However, if you live in an area with hard water, use demineralized/distilled water when cleaning light colored fabrics to eliminate the possibility of hard water stains.
Using Your Vapor Steam Cleaner Wood, Vinyl and Marble Floors Use the large floor brush with a terry cloth att ached. Move the b rush across the floor as if you a re mopping. When the towel is soiled, you can turn the towel over or replace it with a clean towel .
Fiberglass or Stai nless Steel Surfaces Use small nylon detail brush. Slowly move the brush over the su rface to be cleaned. The vapor will emulsify the dirt and gr ease on the sur face. Follow behind with a terr y cloth towel over the b rush to remove excess moisture and residue.
Nicotine and Tar Nicotine and tar dissolves at high temperatures and becomes a light yellow oil that has the consistency of sewing machine oil. When the nicotine/ta r film is touched by a hot t erry cloth towel clipped over the rectangular brush, it im mediately dissolves and flows into the towel.
LIMITED WARRANTY EURO-PRO Operating LLC w arrants this product to be free from defects in material and workmanship for a p eriod of one (1) year from the date of purchase when utilized for n ormal household us e by the original purc haser only. The attached Warranty Registration Card must be filled out and retu rned within 10 days of purchase.
An important point after buying a device Euro-Pro HYDRA STEAMER SC412 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Euro-Pro HYDRA STEAMER SC412 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Euro-Pro HYDRA STEAMER SC412 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Euro-Pro HYDRA STEAMER SC412 you will learn all the available features of the product, as well as information on its operation. The information that you get Euro-Pro HYDRA STEAMER SC412 will certainly help you make a decision on the purchase.
If you already are a holder of Euro-Pro HYDRA STEAMER SC412, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Euro-Pro HYDRA STEAMER SC412.
However, one of the most important roles played by the user manual is to help in solving problems with Euro-Pro HYDRA STEAMER SC412. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Euro-Pro HYDRA STEAMER SC412 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
