Instruction/ maintenance manual of the product Samsung ML 1610 Dell
Go to page of 9
Remanufacturing Instructions Dell 1100 / Samsung ML 1610 For Technical Support, please call Memphis, TN at (888) 757-0762 or Nashua, NH at (888) 627-6555.
© 1998 Oasis Imaging Products, Inc. Page 2 of 9 Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 Fig. 5 5. The waste bin is held in place by a post that sits in a slot on the end cap.
© 1998 Oasis Imaging Products, Inc. Page 3 of 9 6. Remove the two screws that hold the opposite end cap in place (Fig. 6). Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Fig. 6 Fig. 7 Fig. 8 7. Use a small flat screw driver to pry up the end cap to remove it (Fig.
© 1998 Oasis Imaging Products, Inc. Page 4 of 9 Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 Fig. 11 11. Remove the PCR by sliding it toward the gear end of the cartridge and lifting the post once clear from the Saddle (Fig.
© 1998 Oasis Imaging Products, Inc. Page 5 of 9 12. Remove the drum and replace during reassembly (Fig. 12). Fig. 12 Fig. 13 14. Lift up the end of the small spring that comes in contact with the developer roller end post, and then remove the stabilizer plate (Fig.
© 1998 Oasis Imaging Products, Inc. Page 6 of 9 15 . Remove the developer roller and clean with compressed air and a lint free, wax free wipe (Fig.15). Fig. 15 Remanufacturing Instructions Dell 1100 / Samsung ML 1610 Technical Support Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 16.
Remanufacturing Instructions Technical Support Dell 1100 / Samsung ML 1610 Memphis, TN (888) 757-0762 Nashua, NH (888) 627-6555 Fig. 20 20. Clean, inspect and replace all components.
© 1998 Oasis Imaging Products, Inc. Page 8 of 9 Fig. 21 21. Replace or add (starter carts have no fuse) a fuse that is located on the right front corner of the cartridge for the Dell 1100 (Fig.
© 1998 Oasis Imaging Products, Inc. Page 9 of 9.
An important point after buying a device Dell Samsung ML 1610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell Samsung ML 1610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell Samsung ML 1610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell Samsung ML 1610 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell Samsung ML 1610 will certainly help you make a decision on the purchase.
If you already are a holder of Dell Samsung ML 1610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell Samsung ML 1610.
However, one of the most important roles played by the user manual is to help in solving problems with Dell Samsung ML 1610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell Samsung ML 1610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
