Instruction/ maintenance manual of the product REF CH-437C Citizen
Go to page of 30
- Eng 1- - Eng 1 - REF CH-437C INSTR UCTION MANU AL FOR DIGIT AL BLOOD PRESSURE MONITOR English Español Português Deutsch.
- Eng 2- - Eng 2 - General remarks on blood pressure and blood pressure measurement 1. If the cuff is to be deflated quickly, depress “POWER” switch. 2. The attached cuff is suited for an arm circumstance of 22 cm to 32 cm. 3. When attaching the cuff, the air hose should be placed on the inside of your arm on top of the arterial.
- Eng 3- English - Eng 3 - English GENERAL REMARKS 7. DO NOT try to measure blood pressure immediately after drinking coffee or tea or smoking. 8. Measure blood pressure with a relaxed and quiet posture. Keep the center of the cuff at the level of your heart, and DO NOT move your arm or talk.
- Eng 4- - Eng 4 - Precaution for use 1. If you suffer from heart disease, high blood pressure or other circulatory disease, please consult your doctor first.
- Eng 5- English PRECAUTIONS FOR USE AND MAINTENANCE 14. If you use a cardiac pacemaker , consult your physician befor e using the monitor . 15. Be sure to use this unit only for measuring blood pr essure. DO NOT use it for any other purpose. 16. Be sure to use only our authorized parts and accessories.
- Eng 6- PRECAUTIONS FOR USE AND MAINTENANCE Intended Use • This device is noninvasive blood pressur e monitor by oscillometric method. This device can measure the systolic blood pr essure (SYS), the diastolic blood pressur e (DIA) and the pulse rate automatically .
- Eng 7- English PRECAUTIONS FOR USE AND MAINTENANCE Nature and fr equency of maintenance: This product is designed for use over an extended period of time; however , it is generally recommended that it be inspected every two years to ensure proper function and performance.
- Eng 8- - Eng 8 - Air Hose sock et MEMOR Y switch POWER s witch Stand-by Battery compartment cover AC adapter socket Pocket (for storing arm cuff) Systolic blood pressure display section Diastolic blood pressure display section Pulse display section SYS DIA PULS /min.
- Eng 9 - English HOW TO LOAD BATTERIES Air hose plug AC adapter plug lock section draw push 1 Remove the plugs. Remove the air hose plug and AC adapter plug. 2 Remove the Pocket. While pressing the lock section on the bottom of the pocket, pull the pocket in the direction of the arrow.
- Eng 10 - HOW TO LOAD BATTERIES 4 Place the batteries in the compartment. Fit the batteries paying attention to the positive + and negative – terminals. * If the blood pressure monitor is left unused for an extended period of time, the batteries should be removed from the compartment.
- Eng 11 - English HOW TO LOAD BATTERIES 6 Re-attach the pocket. Match the guides at the right and left sides of the pocket with those on the monitor body and slide the pocket till it clicks. 1 Remove the plug, pocket and battery compartment cover. ( See page 9 "HOW TO LOAD BATTERIES".
- Eng 12 - 2 Remove each battery from top to bottom by lifting up its end, rotating it in the direction of the arrow with your fingertip. 3 Re-attach the battery compartment cover and the pocket.
- Eng 13- English USING AC ADAPTER (OPTION) 2 Plug the AC adapter into a mains power outlet. • If you plan to use the AC adapter for an extended period of time, remove the batteries. If the batteries are left in the compartment, electr olyte may leak from the batteries and cause a fault in the blood pressur e monitor .
- Eng 14- - Eng 14 - POINTS FOR ACCURATE MEASUREMENT Blood pressure varies with posture, the time of day or numerous other factors. It is recommended to measure blood pressure at the same time each day in the same posture.
- Eng 15 - English HOW TO WRAP THE ARM CUFF 1 Unroll the arm cuff. • When the arm cuff comes off, pass it through metal bar, directing the Velcro-attached side to the outer surface. 2 Put the arm cuff around your arm so that the air hose comes to the left palm side.
- Eng 16 - 4 Draw the end of the arm cuff to fit it on the arm and secure with Velcro. • Carefully place the arm taking care to obtain adequate tightness, not too tight or loose. Adequate tightness is obtained when you can place a finger between the cuff and your arm.
- Eng 17 - English HOW TO MEASURE YOUR BLOOD PRESSURE To get an accurate blood pressure measurement, you need to start by setting the pressure cuff on your arm to the correct starting pressure. The correct starting pressure level for you is your systolic blood pressure (the higher of your two blood pressure readings) plus 40 mmHg.
- Eng 18 - HOW TO MEASURE YOU BLOOD PRESSURE 2 Insert the air hose plug into the case of the unit. 3 Sit in the recommended position. ( See page 14 "POINTS FOR ACCURATE MEASUREMENTS".) 4 Measure your blood pressure. Press to start inflating the cuff.
- Eng 19 - English About 3 minutes after the last measurement was obtained, the power will be turned off, automatically. Automatic Power Off Function 5 After a measurement is obtained, press . The power will be turned off. 6 Store the arm cuff in the pocket.
- Eng 20 - In this mode, the pressure in the cuff is raised to the correct level automatically, according to the previous measurement stored in memory, and your blood pressure is measured. 1 Press . The cuff is inflated immediately after the mark is turned on and then off.
- Eng 21 - English When your pulse is detected, the mark will blink and pressure will be shown in the Diastolic Blood Pressure readout. (Diastolic blood pressure is the lower number of your two blood pressure readings).
- Eng 22 - You can change the starting pressure setting by pressing the . 1 Press . The cuff starts to inflate. The pressure will continue to increase while the is pressed. 2 When the pressure indicator reaches the correct starting pressure for you, stop pressing the .
English - Eng 23 - The cuff pressure will be set the pressure value you decided when you stop pressing the , and the monitor will start measuring your blood pressure.
- Eng 24 - * The data stored in memory cannot be called up during measurement. L Measurements stored in memory are assigned "a memory number" in the order of measurement and up to 7 measurements can be stored in the memory.
- Eng 25 - English DISPLAY MARK CONDITION/CASE CORRECTIVE ACTION Pressure was insufficient. Appears when the blood pressure could not be measured accurately. Re-wrap the arm cuff snugly. Take another reading, making sure you remain still. ( See page 15 "HOW TO WRAP THE ARM CUFF".
- Eng 26 - The heart is a pump that circulates blood throughout your body. Blood is pumped from the heart at a constant pressure into arteries. This pressure is called the arterial blood pressure, which represents, in general, blood pressure.
- Eng 27 - English QUESTIONS AND ANSWERS ON BLOOD PRESSURE Q Why is the blood pressure measured at home different from that measured at the doctor or a hospital? A Blood pressure may vary with exercising, ambient temperature or me n t al s t at es .
- Eng 28 - BEFORE ASKING FOR REPAIR/INSPECTION Be sure to check the following before sending your blood pressure monitor for repair/inspection. Calibration: The blood pressure measuring device is generally recommended to have the monitor inspected every two years to ensure correct functioning and accuracy.
- Eng 29- English Measurement system: Oscillometric method Display Digital Display Measuring Range Pr essure 0 to 280 mmHg (in 1 mmHg increments) Pulse 40 to 180 beats/min.
CITIZEN is a registered trade mark o f Citiz en Holdings Co . , Ltd ., Japan Design and Spe ci fi cat ion a re su bje ct to c ha ng e wi tho ut n oti ce.
An important point after buying a device Citizen REF CH-437C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Citizen REF CH-437C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Citizen REF CH-437C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Citizen REF CH-437C you will learn all the available features of the product, as well as information on its operation. The information that you get Citizen REF CH-437C will certainly help you make a decision on the purchase.
If you already are a holder of Citizen REF CH-437C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Citizen REF CH-437C.
However, one of the most important roles played by the user manual is to help in solving problems with Citizen REF CH-437C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Citizen REF CH-437C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
