Instruction/ maintenance manual of the product CH-463E Citizen
Go to page of 31
INSTRUCTION MANUAL FOR DIGIT AL BLOOD PRESSURE MONITOR REF CH-463E Design and Specification are subject to change without notice. CITIZEN is a register ed trademark of Citizen Holdings Co., Japan. CITIZEN es una marca r egistrada de Citizen Holdings Co.
- Eng 2 - Ensure that you have all the following components Contents 3 - GENERAL REMARKS 5 - PRECAUTIONS FOR USE AND MAINTENANCE 8 - UNIVERSAL DESIGN 9 - IDENTIFICA TIONS OF P ARTS 10 - LOADING THE BA.
- Eng 3 - English General remarks on blood pr essure and blood pr essure measur ement 1. T o defl ate the cuff quickly , press the “ST ART/STOP” switch. 2. The attached cuff is suitable for arm cir cumferences of 20-32 cm. 3. When attaching the cuff, the air hose should be placed on the inside of your arm on top of the artery .
- Eng 4 - English GENERAL REMARKS 9. DO NOT measure blood pr essure when the cuf f has been on your arm for a few minutes or more. During this time, your arm will have built up a higher blood pr essure and you will not get valid reading. 10. The fi gure below shows the blood pressur e classifi cations under the WHO standards.
- Eng 5 - English Precautions for use 1. If you suffer fr om heart disease, high blood pressur e or other circulatory disease, consult your physician before using the monitor .
- Eng 6 - English : Device complies with the requirements of the EC Dir ective 93/42/EEC. Registered with the CE Marking. : T ype B applied part : Attention, consult accompanying documents. : Appliance compliance WEEE directive : Manufacturer : Batch Code W ar ning The device has been tested and homologated in accordance with EN60601-1-2 for EMC.
- Eng 7 - English Nature and fr equency of maintenance: This product is designed for use over an extended period of time; however , it is generally recommended that it be inspected every two years to ensure pr oper function and performance.
- Eng 8 - English This product has been developed with the concept of Universal Design to ensur e safe and easy use for a broader range of users. The pr oduct’ s shape and color was designed to port.
- Eng 9 - English Component names IDENTIFICA TION OF P ARTS Air hose socket Air hose connector MODE Switch SET Switch Battery cover ST ART/STOP Switch a Stand-by Cuff Air hose Date display Time displa.
- Eng 10 - English (Batteries supplied with the unit should be loaded in compartment before putting the Blood pressur e monitor in use.) LOADING THE BA TTERIES 1 Open the cover of battery compartment. Pressing the hook down, pull the cover towar d you to open.
- Eng 11 - English USING AC ADAPTER (OPTION) Using the optional dedicated AC adapter for the CITIZEN blood pressur e monitor (CH-463E) allows you to measure your blood pr essure without having to worry about the amount of remaining charge in the batteries.
- Eng 12 - English REMOVING THE BA TTERIES • When the icon is displayed, or where the clock is no longer shown or nothing appears in the display , replace the old batteries with four new ones. All four batteries should be changed at once. • The memory is erased if the batteries are removed for r eplacement.
- Eng 13 - English SETTING THE CLOCK 2 Date and time correcting pr ocedure The alarm time, current time and calendar should be set in the written or der . • Each time you press the “MODE” switch, the data item to be modifi ed changes in the sequence shown below .
- Eng 14 - English SETTING THE CLOCK 3 Correcting the “minute” of an alarm time • Press “MODE” switch for one second or more to place the unit in the alarm-time minute correction state. • Press “SET” switch to increase the minute of the alarm time in increments of one minute.
- Eng 15 - English SETTING THE CLOCK 7 Correcting the “hour” of the curr ent time • After the completion of the current-time minute correction as described above, press “MODE” switch to place the unit in the current-time hour corr ection state.
- Eng 16 - English SETTING THE CLOCK 11 Changeover of the “time system” • After the completion of the day-of-the-month correction as described above, press “MODE” switch to place the unit in the time system selection state. • Every time “SET” switch is pressed, the 12-hour system (12H) and (24H) will be changed over .
- Eng 17 - English 3 Adjust the position of the arm cuff so that the blue marker is located in the center of your arm and the hem of the cuff is 1 to 2 cm above your elbow . MEASURING YOUR BLOOD PRESSURE * The cuff should be put on the bar e arm or over a light-weight underwear .
- Eng 18 - English 4 T urn the knob clockwise until it idles. MEASURING YOUR BLOOD PRESSURE 5 Place your arm on a table or the like so that the center of the cuff comes to the height of your heart.
- Eng 19 - English TIPS FOR OBT AINING ACCURA TE MEASUREMENTS Y our blood pressur e varies according to your postur e, the time of day and a range of other factors. Ideally , you should measure your blood pr essure in the same postur e at the same time every day .
- Eng 20 - English MEASURING YOUR BLOOD PRESSURE Plug the air hose connector into the main unit. Start measurement. • Plug the air hose connector fi rmly into the air hose socket on the main unit as illustrated. • Press the "ST ART/STOP" switch.
- Eng 21 - English MEASURING YOUR BLOOD PRESSURE • Wait a while after the completion of pr essurization. Then, the mark comes on and the unit automatically starts measuring your blood pressur es.
- Eng 22 - English MEASURING YOUR BLOOD PRESSURE Revert the display to the time indication. Store the cuf f in the pocket. • Press “ST ART/STOP” switch to revert the display to the time indication. * When you want to stop measurement, pr ess “ST ART/STOP” switch.
- Eng 23 - English AUTOMA TIC CHANGEOVER FEA TURE • Press “ST ART/STOP” switch after the completion of blood pressure measur ement to revert the display to the time display .
- Eng 24 - English HOW TO CALL UP THE DA T A STORED IN MEMOR Y • “A” that represents the average value appears on the upper left section of the display . Then, the average of the whole data stored in memory appears on the display . • Press the “MEMORY” switch again.
- Eng 25 - English HOW TO DELETE THE DA T A STORED IN MEMOR Y • The data stored in memory can be deleted. • Press “MEMORY” switch to call up the data you want to delete to the display . Keep the switch held pressed for three seconds or mor e to delete the data.
- Eng 26 - English KEY TO DISPLA Y ICONS Icon displayed Condition/Cause Corrective action Insuffi cient pr essure. Repeat measurement again. Appears when the blood- pressur e could not be measured accurately . Reapply cuff pr operly and measure again.
- Eng 27 - English ABOUT “BLOOD PRESSURE” What is blood pressur e? The heart is a pump that circulates blood thr oughout your body . Blood is pumped from the heart at a constant pressur e into arteries. This pressur e is called the arterial blood pressur e and repr esents, in general terms, your blood pressur e.
- Eng 28 - English BLOOD PRESSURE Q&A Q Why is the blood pressur e measured at home dif ferent fr om that measured by the physician or at a hospital? A Y our blood pressur e may vary due to exercise, the ambient temperatur e or your mental state.
- Eng 29 - English BEFORE REQUESTING REP AIRS OR TESTING Make sure to check the following befor e sending your blood pressur e monitor away to be tested or repair ed. Problem Checks Response Display stays blank when you press the “ST ART/ STOP” switch.
- Eng 30 - English SPECIFICA TIONS Model Number: CH-463E Measurement system: Oscillometric method Measurement Localization Upper Arm Cuff: Arm cuff Arm circumfer ence range: 20.
INSTRUCTION MANUAL FOR DIGIT AL BLOOD PRESSURE MONITOR REF CH-463E Design and Specification are subject to change without notice. CITIZEN is a register ed trademark of Citizen Holdings Co., Japan. CITIZEN es una marca r egistrada de Citizen Holdings Co.
An important point after buying a device Citizen CH-463E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Citizen CH-463E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Citizen CH-463E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Citizen CH-463E you will learn all the available features of the product, as well as information on its operation. The information that you get Citizen CH-463E will certainly help you make a decision on the purchase.
If you already are a holder of Citizen CH-463E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Citizen CH-463E.
However, one of the most important roles played by the user manual is to help in solving problems with Citizen CH-463E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Citizen CH-463E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
