Instruction/ maintenance manual of the product IPS4360 Cisco Systems
Go to page of 12
S LIDE R AIL I NSTALLATION I NSTRUCTIONS For Cisco C170, M170, and S170 Appliances and Cisco 5512-X, 5515-X , 5525-X, 5545-X, 5555-X Adaptive Security Appliances and Cisco IPS 4345 and 4360 1 V erify .
2 1 Verify the Box Contents Remove the contents from the box and verify that it contains t he following items for all rack types: • Slide Rails (x2) (preconfigured for square hole racks) • Phillip.
3 2 Disassemble the Slide Rail Pull the inner slide rail from the outer slide rail. Slide the plastic tab forward, and p ull the inner slide rail to disconnect it from the outer slide rail.
4 3 Attach Inner Rails to the Chassis Align one of the inner slide rail key holes over the chassis shoulder screw on one side. Slid e the inner slide rail forward so that the shoulder screw is securely in pl ace. Use a Phillips screwdrive r to secure the inner slide rail with one Phillips flat-head screw .
5 4 Verify the Rack Type The slide rails are pre-assembled for square hole racks. See the following steps for the different rack types: • Square hole racks . Go to “Attach the Outer Slide Rail to Round and Square Hole Racks” on page 8. • Round hole racks.
6 5 Round Hole Racks Using a Phillips head screwdriver , remove the square insert from the rear of the rail. Keep the two Phillips head screws. Remove the square insert from the front of the rail. Keep the two Phillips head screws. Align the round hole i nsert to th e rear of the rail, and secure it with two of the saved screws.
7 6 Threaded Hole Racks Using a Phillips head screwdriver , remove the square hole insert from the rear of the rail. Remove the square hole insert from the front of the rail. Align the threaded hole bracket to the front of the rail over the hooks. Secure it with the threaded hole standoff using a flat-head screwdriver .
8 7 Attach the Outer Slide Rail to Round and Square Hole Racks Align the front of one of the out er slide rails with the rack upright, push it forward, and clic k it into place. Align the rear of the outer slide rail with the rack upright, pull the rele ase tab, push the slide rail toward the rack, release the tab, and click it into place.
9 8 Attach the Outer Slide Rail to Threaded Hole Racks Align the slide rail to the front rack post. Secure it with two of the included Phillips pan-head screws . Align the slide rail to the rear rack post. Secure it with two of the included Phillips pan-head screws .
10 9 Install the Chassis Align the inner slide rails to the outer slide rails. Install the inner slide rails into the ou ter slide rails until they lock into place. Pull the side release tabs to unlock the inner slide rail, and push the chassis a ssembly into the rack.
11 10 Secure the Chassis Secure the chassis to the rack with the front captive scre ws. Obtaining Documentatio n and Submitting a Service Request For information on obtaining documentation, submitting.
Printed in the USA on recy cled paper containing 10% postconsumer waste. 78-19691-04 Americas Hea dquarters Cisco Systems, Inc. San Jose, CA Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore Europe Headquarters Cisco Systems International BV Amsterda m, The Netherlands Cisco has more t han 200 offices worldw ide.
An important point after buying a device Cisco Systems IPS4360 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems IPS4360 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems IPS4360 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems IPS4360 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems IPS4360 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems IPS4360, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems IPS4360.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems IPS4360. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems IPS4360 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
