Instruction/ maintenance manual of the product Z600 Cisco Systems
Go to page of 11
Chapter ➆ Hardware Reference 85 C H A P T E R ➆ Hardware Reference The information in this chapter will enable you to: ❏ Use this chapter as a quick-reference for system performance specifications Z600 Electrical Specifications Electrical specifications for the Z Drive’s input and output power are provided in this section.
86 Z Drive User Guide Z600 Technical Data Units Z-605 Z-606 Z-610 Z-620 Z-630 Z-635 Z-640 Continuous Stall Torque* oz-in lb-in lb-ft Nm 346 22 1.8 2.4 633 40 3.3 4.5 867 54 4.5 6.1 1743 109 9.1 12.3 2475 155 12.9 17.5 2458 154 12.8 17.4 4114 257 21.4 29.
Chapter ➆ Hardware Reference 87 Motor Size: Z605 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 68.
88 Z Drive User Guide Motor Size: Z606 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (sinusodial) Electrical Time Mechanical Time Thermal 120 51.
Chapter ➆ Hardware Reference 89 Motor Size: Z610 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 61.
90 Z Drive User Guide Motor Size: Z620 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 124.
Chapter ➆ Hardware Reference 91 Motor Size: Z630 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 175.
92 Z Drive User Guide Motor Size: Z635 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 175.
Chapter ➆ Hardware Reference 93 Motor Size: Z640 Value Units Tolerance 1 2 3 4 5 Constant (s): Torque Voltage (Sinusodial) Electrical Time Mechanical Time Thermal 291.
94 Z Drive User Guide Speed/Torque Curves The following speed/torque curves represent the available shaft torque at different operating speeds. Operation at 120VAC and 240VAC is shown for each motor size. Actual motor torque may vary ± 10% due to motor manufacturing variances.
Chapter ➆ Hardware Reference 95 0 700 140 0 210 0 280 0 350 0 420 0 490 0 560 0 630 0 700 0 0 600 120 0 1800 240 0 30 0 0 36 0 0 Z630 at 120VAC Tor q u e ( oz-in ) S p e ed (rp m ) 0 700 140 0 210 0.
An important point after buying a device Cisco Systems Z600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Cisco Systems Z600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Cisco Systems Z600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Cisco Systems Z600 you will learn all the available features of the product, as well as information on its operation. The information that you get Cisco Systems Z600 will certainly help you make a decision on the purchase.
If you already are a holder of Cisco Systems Z600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Cisco Systems Z600.
However, one of the most important roles played by the user manual is to help in solving problems with Cisco Systems Z600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Cisco Systems Z600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
