Instruction/ maintenance manual of the product MPC-LNK Accell
Go to page of 18
Table of Contents MPC-68K System Construction Example ....................................................................... 2 MPC-68K Series ~16-Bit CPU Controller ~ ................................................................. 4 MPC-LNK .......
-1- Please Try Controlling by MPC. Your “Device” will Change from That Day. MPC uses the latest flash ROM! Equipped with an on-board ROM-conversion function, it is a board-type controller with complete protection against noise (RS-232C and pulse generation are also photo-isolated).
-2- MPC-68K System Construction Example * Connecting two slots or more may require a terminator-compatible board MBK-68K. DC 12V ~ DC 24V is supplied to each board of the MPC series, RS-ISO, and PIF-422. For the details of MPC program and hardware, see the “USER’S MANUAL”.
-3- T o uch P ane l Dis play Connected wit h MBK-68 via RS422 at 38.4 k bps. Using the standard ON/OFF command supporting 68K, appli cations utilizin g a touch panel can be construct ed ! 98/9 Digital.
-4- MPC-68K Series ~16-Bit CPU Controller ~ MPC-684 High-Speed CPU Board 4 Outputs, 8 Inputs [Characteristics] This is a high-speed CPU board equipped with two RS-232C channel. By its installed interpreter (ADVFSC ® ), programming is possible in a BASIC-like environment.
-5- MPG-68K PG Board (100K) 4-Axis Output, 8-Origin Input [Characteristics] This is a board equipped with 4-axis simultaneous-control pulse generation. By an interpreter (ADVFSC ® ) installed on MPC-68K, programming is possible in a BASIC-like environment.
-6- IOP-048 24-Point Photocoupler Input Board / 24-Point Transistor Output Board [Characteristics] This is a dedicated input/output board equipped with 24-points for each input and output. Each input/output is equipped with an LED monitor. The input and output interfaces have equivalent specifications with MOP and MIP, respectively.
-7- MBK-68 Multifunction Board RS-422 * 2CH [Characteristics] MBK-68 is a function-addition board of MPC-68K and MPC-683. The following functions are added. Please insert this board to the right end of the rack (on the opposite side of CPU). Bus terminator is added, making a large-scale system more reliable.
-8- MPC-LNK MPCLNK is a network board with an objective of sharing memory data and bit-unit information. By using MPCLNK, connected equipment (personal computers and MPC-68K) can share 249-byte memory.
-9- MPC-LNK, PC-LNK Communication Board (98 C-Bus Standard) / PC-LNK (ISA) [Characteristics] MPC-LNK (PC-LNK) is a data network connecting our MPC-68K, NEC PC98 series, and DOS/V machines. Unlike networks by other specifications, it does not let the host generate interruptions or consume system memory.
-10- MPC-816 Series ~ 8-Bit CPU Controller ~ MPC-816K Main CPU Board 8 Outputs, 16 Inputs [Characteristics] This is a CPU board equipped with the I/O for control. By its installed interpreter (TNYFSC), programming is possible in a BASIC-like environment.
-11- MPC-816XC Compact Controller 8 Outputs, 16 Inputs [Characteristics] This is a single MPC-816 stored in a case. Please use it when you use one CPU board installed directly in an apparatus.
-12- MPG-301 One-Axis Pulse Generation Encoder Counter Board 1M PPS 1-axis pulse output 1M PPS encoder input, etc. [Characteristics] MPG-301 is a pulse-generation multifunction board which is loaded with one Kyopal X3202 and let MPC816 directly operate the IC register.
-13- RACK-SET (A) 4-Board Construction Rack Set [Characteristics] This is a rack set for MPC-816. It deals with a 4-board construction system. MPC-SET (A) is a rack set with MPC-816 and MIF-816 added. [Construction] RACK (A) main body, BUS board A, Rack flange.
-14- MPC Peripherals ~ Common for MPC-68K and MPC-816 ~ Cable DOS/V 98 [Characteristics] This is a cable of our company brand to connect MPC and a personal computer. Although the basic cable is for DOS/V, because a 25-pin conversion connector is included, it can also be used for PC98.
-15- How to Deal with Noise Control involving position determination control internally deals with signals of several msec. Because this signal is at a si milar level to a noise signal, no matter what control device is used, reliability and accuracy cannot be obtained without any noise countermeasures.
-16- FTMW (FTM – Work Bench) FTMW is a programming tool for MPC-816 and MPC-68K, equipped with all the functions necessary for program development and maintenance. <- MPC-816 direct connection. <- MPC-68K direct connection. <- FTM Work Bench ends.
-17- Request to Our Customers Concerning the application range of our products All of our products use general-use components. Therefore, please refrain from using them for fields requiring high reliability and for the purposes dealing with human life.
An important point after buying a device Accell MPC-LNK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Accell MPC-LNK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Accell MPC-LNK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Accell MPC-LNK you will learn all the available features of the product, as well as information on its operation. The information that you get Accell MPC-LNK will certainly help you make a decision on the purchase.
If you already are a holder of Accell MPC-LNK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Accell MPC-LNK.
However, one of the most important roles played by the user manual is to help in solving problems with Accell MPC-LNK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Accell MPC-LNK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
