Instruction/ maintenance manual of the product 95591-.75 HP Chicago Electric
Go to page of 14
VERTICAL FLOA T SUMP PUMP Model Model Model 95591 - .75 HP 95592 - 1 HP 95593 - 1.5 HP SET UP AND OPERA TING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally . Due to continuing improvements, actual product may differ slightly from the product described herein.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 2 SPECIFICA TIONS Model 95591 Model 95592 Model 95593 Motor 1 15 V~ / 60 Hz / 4 A / 3/4 HP 1 15 V~ / 60 Hz / 5.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 3 ELECTRICAL SAFETY Grounded tools must be plugged into a GFCI (Ground Fault Circuit Interrupt- 1. er) outlet, properly installed, and grounded in accordance with all codes and ordinances.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 4 Store idle equipment out of reach of children and other untrained persons. 2. Electrically-powered products are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts, and 3.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 5 This Pump is designed to move clean or dirty water only . Do not pump water hotter than 95 degrees Fahrenheit. Make sure the discharge pipe 7. (not included) is secured to a solid surface to ensure the stability of the Pump.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 6 GROUNDING TO PREVENT ELECTRIC SHOCK AND DEA TH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualied electrician if you are in doubt as to whether the outlet is properly grounded.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 7 Double insulated tools may be used 2. in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Extension Cords Grounded 1. tools require a three wire extension cord.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 8 UNP ACKING When unpacking, check to make sure all the parts shown on the Parts List on page 12 are included. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 9 TO 1 15 VOL T , GROUNDED GFCI OUTLET 1/8” AIR BLEED HOLE BASE (25) DISCHARGE PIPE (NOT INCLUDED) CHECK V AL VE OR UNION (NOT INCLUDED) FIGURE E o 1-1/4” OR 1-1/2” NPT PVC 3.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 10 INSPECTION, MAINTENANCE, AND CLEANING W ARNING! Always shut off the electrical power to the GFCI outlet rst. Then, dis - connect the Pump’s Power Cord & Plug from the GFCI outlet prior to performing any inspection, maintenance, or cleaning procedures.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 1 1 T o clean the Impeller Cover and Impeller: 2. A clogged or dirty Impeller Cover or Impeller (28) will greatly reduce performance of the Pump. T o clean the Impel- ler Cover (31), spray the Cover with clean water .
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 12 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE T OOL ONL Y .
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 13 ASSEMBL Y DIAGRAM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 31 Power Cord/Plug not shown. Note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
SKU 95591/95592/95593 For technical questions, please call 1-800-444-3353 P AGE 14 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality .
An important point after buying a device Chicago Electric 95591-.75 HP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Chicago Electric 95591-.75 HP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Chicago Electric 95591-.75 HP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Chicago Electric 95591-.75 HP you will learn all the available features of the product, as well as information on its operation. The information that you get Chicago Electric 95591-.75 HP will certainly help you make a decision on the purchase.
If you already are a holder of Chicago Electric 95591-.75 HP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Chicago Electric 95591-.75 HP.
However, one of the most important roles played by the user manual is to help in solving problems with Chicago Electric 95591-.75 HP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Chicago Electric 95591-.75 HP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
