Instruction/ maintenance manual of the product E Series Capresso
Go to page of 24
Operating Instructions and W arranty Customer Service 1-800-220-5701 Impr essa E Series Fully Automatic Cof fee & Espr esso Center with Clearyl W ater Car e System 64701R.
IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids.
D. This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way . If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
.
f. Rinse g. Steam h. Pre-Gr ound Coffee e. Programming a. On/Off b. 1-Cup mild normal strong d. 2-Cup e. Dial Fig. 6 Fig. 7.
Fig. 13 Fig. 14.
Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 15 Fig. 16 Steaming: up Frothing: down.
T able of Contents 8. Important Safeguards / Jura-Capr esso...............................2 Illustrations.......................................................................4–7 1. Product Registration..............................................
1. PRODUCT REGISTRA TION Please read the enclosed pr oduct registration form now . Fill it out and mail or fax it to us within two weeks after purchasing your machine or register online thr ough our website: www .capresso.com. Important : This registration is part of your warranty (chapter 24).
extraction of bitter oils and release less caf feine than any other brewing method. Y ou will always make the absolute freshest and most aromatic cup of cof fee. This is the reason why many European r estaurants and hotels serve fresh pressured br ewed coffee only .
All Display Messages Are Shown in RED 5. F ACTOR Y SETTINGS Each machine leaves the factory with the following settings: Filter ..................... NO Hardness Level .... 2 Aroma ................... ROBUST Auto Off ................ 2 hours after last use Language .
Sugar Coated Beans : DO NOT fill sugar coated beans into the bean container . The sugars will stick to the burrs and clog the flow of ground cof fee. Have your local coffee store grind the sugar coated beans and use as described in chapter 11. Using Oily Beans: Beans with an oily surface tend to stick together .
Grinding times (approx.) MILD .......... 6 to 7 seconds. NORMAL ... 7.5 to 8.5 seconds. STRONG..... 9 to 10 seconds. AROMA -setting " ST ANDARD " has the shorter grinding times. AROMA -setting " ROBUST " has the longer grinding times.
13. FROTHING and STEAMING The steam function can be used to heat up any liquid and to steam and froth milk. Steaming Position: The Frother's metal cylinder is in the UP position (Fig. 16). In the steaming position hot steam is injected into the milk (or any other liquid) without creating a fr othy layer on top.
15. CLEANING THE DUAL FROTHER PLUS Always keep the Dual Frother Plus clean and fr ee of milk deposits. Hardened milk particles will make it impossible to create milk fr oth. Fast cleaning: Display shows READY . Place a cup underneath the frother (Fig.
• Insert the cartridge with its taper ed end down. Make sure it fits snugly over the white mesh piece inside the water container . Push down gently (Fig.10). • Close the holder for the cartridge so that it engages in the water tank (Fig.11). • Fill the water tank with fr esh cold water and replace.
17. ADJUSTING THE WA TER HARDNESS W ater is heated inside the machine. With use, this leads to calcium deposits forming inside the machine. The display will remind you when it is time to perform a decalcifying cycle. The machine is set to level 2 (medium hard water).
18a. AROMA 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to AROMA 3. Push Dial: ROBUST 4. T urn Dial to select from ST ANDARD or ROBUST 5. Push Dial to confirm selection. 6. Push the P button to get back to READY . In ROBUST the grinder will always grind approx.
18f. RINSE Y ou can tur n off the automatic rinsing mode for when the machine shuts down. 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to RINSE 3. Push Dial: RINSE ✔ 4. T urn Dial to select RINSE – 5. Push Dial to confirm selection.
19e. GENERAL CLEANING INSTRUCTIONS Never use abrasive materials or chemicals to clean the machine. • Clean the housing with a soft, damp cloth. • Rinse water tank daily and fill with fresh, cold water .
7. Push the Rinse button. The display shows CLEANING . The cleaning program will dispense hot foamy water in intervals through the cof fee spout into the drawer . 8. When finished, the display shows EMPTY DRAWER . 9. Lift and remove the drawer . Empty the used coffee container and drawer and replace.
9. Place a lar ge container (at least 20 oz.) under neath the frother . The display shows OPEN T AP . 10. T ur n the Steam/Water Selector to the water symbol. The machine will pump hot water through the fr other in intervals. During this procedur e the display shows DECAL ON .
24. TROUBLESHOOTING A. NO COFFEE COMES OUT OF THE COFFEE SPOUT Reason: Beans in bean container are not feeding pr operly into the grinder because they are stuck together . Solution : Stir beans before grinding and while grinding turn the grinding selector to the coarsest setting.
25. WARRANTY For Home Use: Limited One Y ear Warranty For Non-Home Use: Limited Six Month W arranty This warranty covers your new IMPRESSA E Series. This warranty is in effect for the period described above fr om the date of the first consumer purchase and is limited to the United States of America.
An important point after buying a device Capresso E Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Capresso E Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Capresso E Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Capresso E Series you will learn all the available features of the product, as well as information on its operation. The information that you get Capresso E Series will certainly help you make a decision on the purchase.
If you already are a holder of Capresso E Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Capresso E Series.
However, one of the most important roles played by the user manual is to help in solving problems with Capresso E Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Capresso E Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
