Instruction/ maintenance manual of the product 872 Krups
Go to page of 14
KRU PS Espresso Bravo Plus Model #872 Modhle #872 Modelo #872 @ Instructions for Use @ Manuel d’instructions @ lnstrucciones de USO.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:.
0 Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”, then remove plug from wall outlet. 0 Do not use appliance for other than intended use. 0 Do not unscrew or remove boiler cap while the machine is in operation.
0 Never use warm or hot water to fill the water container! Use cold water only! 0 Keep your hands and the cord away from hot parts of the appliance during operation. 0 Never clean with scouring powders or hard implements. SPECIAL CORD SET INSTRUCTIONS Regarding your cord set: A.
Krups Espresso Bravo Plus k- i h.
a: b: c: d: e: f: g: h: i: j: k: Hinged water container lid (boiler cap inside) Steam nozzle with “Perfect Froth” attachment Filter holder Carafe lid Glass carafe Removable overflow grid Measuring spoon Two cup adapter Filter basket ON/OFF indicator light 3 way selector switch: rp = Espresso ‘0’ =Off @ = Steam a: b: c: d: e: f: g: h: i: -.
- 8 !.
I5 A B I C 0 8.
Preparing espresso or cappuccino is different than brewing regular drip coffee. One main difference is that water will come to a boil and will be forced through ground coffee. An Espresso machine works under pressure and needs special attention. Read all instructions, Cautions, Notes and Attentions.
To insert the filter holder, line up the arrow located on the thumb guard of the filter holder with the arrow on the left side of the machine. Raise the filter holder up into brewing head and turn the filter holder firmly to the right, until it can go no further.
13. Once the coffee has stopped the complete brewing process, turn OFF the machine by moving the switch to the “0” position. The control light will go out, indicating that the machine is OFF. 14. Before you remove the filter holder for cleaning, make sure that the boiler is no longer under pressure (see section CAUTION-PRESSURE).
ATTENTION: W The top closure of the “Perfect Froth” attachment (see figure 15 Part A) has a very fine hole which draws air into the milk. If this tiny hole gets clogged, “Perfect Froth’ will not work properly. So never immerse the top closure in milk or foam.
Following this, allow 2 boiler containerfuls of clear water to run through the system. Switch off the appliance. Allow the appliance to cool down. Insert the brewing sieve into the brewing head again and push the “Perfect Froth” onto the steam nozzle.
GUARANTEE OF PERFORMANCE This fine KRUPS product is manufactured according to a rigid code of quality standards, and, with minimum care, should give years of satisfying service.
An important point after buying a device Krups 872 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Krups 872 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Krups 872 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Krups 872 you will learn all the available features of the product, as well as information on its operation. The information that you get Krups 872 will certainly help you make a decision on the purchase.
If you already are a holder of Krups 872, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Krups 872.
However, one of the most important roles played by the user manual is to help in solving problems with Krups 872. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Krups 872 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
