Instruction/ maintenance manual of the product EKI-2525P Advantech
Go to page of 28
EKI-2525P 5-port Industrial PoE Unmanaged Ethernet Switch User Manual.
EKI-2525P_ Manual_ed 1 ii Copyright The documentation and the software i ncluded wi th this product are copyrighted 2007 by Advantech Co., Ltd. All rights ar e reserved. Advantech Co., Ltd. reserves the right to mak e improvements in the pro ducts describe d in this ma nual at any time witho ut notice.
iii Product Warranty (2 years) Advantech warrants to you, the or igina l purchaser, that each of its products will be fre e from defects in materials and workmanshi p for two years from the date of purchase.
EKI-2525P_ Manual_ed 1 iv Declaration of Conformity CE This product has passed the CE test for envir onmental spe cifications. Test conditions for passing included the equipment being operated within an indust rial enclosure.
v Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC out let before clea ning. Use a damp cloth. Do not use liquid or spray detergents for clean ing.
EKI-2525P_ Manual_ed 1 vi Safety Precaution - Static Electricity Follow these simple precautions to protect your self from harm and the produ cts from damage. 1. To avoid electrical shock, always di sconnec t the power from your PC chassis before you work on it.
vii Conte nts Contents Chapter 1 Overview ........................................... 2 1.1 Introduction ......................................................... 2 1.1.1 High-Speed Transmissions ....................... 2 1.1.2 Power-over-Ethernet (PoE) .
EKI-2525P_ Manual_ed 1 viii.
1 Chapter1 Overview Sections include: z Introduction z Features z Specifications z Packing List z Safety Precaution CHAPTER.
EKI-2525P_ Manual_ed 1 2 Chapter 1 Overview 1.1 Introduction The EKI-2525P is a cost-effective sol ution and meets the hig h reliability requirements demanded by industri al applications. Usi ng fiber port can extend the co nnection distance that increases the network elasticity and performa nce.
3 Chapter1 1.2 Features • Provides 5 x 10/100Base-TX Ethernet ports with 4 PoE injectors of RJ-45 connector • Supports full/half duplex flow control • Supports store and forward transmission •.
EKI-2525P_ Manual_ed 1 4 1.3 Specification Communications Compatibility IEEE 802.3, 802.3u, 802.3x, 802.3af LAN 10/100Base-TX Transmission Distance Up to 100 m Transmission Speed Up to 100 Mbps Interf.
5 Chapter1 Certifications Safety UL, 60950-1, CAN/CSA-C22.2 No.60950 EMC U.S.A.: FCC Part 15 CISPR 22 EU: EN55011, EN61000-6-4 EN55022, Class A, EN61000-3-2/3 EN55024 IEC61000-4-2/3/4/5/6/8/11/12 EN61.
EKI-2525P_ Manual_ed 1 6 1.4 Packing List • 1 x EKI-2525P Industrial Ethernet Switch • 1 x eAutomation Industrial Communication CD-ROM with software, and User m anual • 2 x Wall Mounting Bracket and Screws • 1 x DIN-rail Mounting Bracket and Screws • 1 x EKI-2525P Startup Manual • 1 x DC Jack Cable 2.
7 Chapter2 Installation Sections include: z LED Indicators z Dimensions z Mounting z Network Connection z Power Connection CHAPTER.
EKI-2525P_ Manual_ed 1 8 Chapter 2 Installation In this chapter, you will be given an overvi ew of the EKI-2525P hardware installation procedures. 2.1 LED Indicators There are few LEDs display the power status and network status locate d on the front panel of EKI-2525P, each of them has its own specific meani ng as the table below.
9 Chapter2 2.2 Dimensions (units: mm) Figure 2.1: Front View of EKI-2525P.
EKI-2525P_ Manual_ed 1 10 Figure 2.2: Side View of EKI-2525P.
11 C hapter2 Figure 2.3: Rear View of EKI-2525P.
EKI-2525P_ Manual_ed 1 12 Please refer to page 16 for pin assignment. Figure 2.4: Top View of EKI-2525P.
13 C hapter2 2.3 Mounting The EKI-2525P supports two mounting methods: DIN-rail & Wall. 2.3.1 Wall mounting EKI-2525P can be wall-mounted by using the includ ed mounting kit. Then, hang on the EKI-2525P to the nails on the wall. First, use the screws included in the pack age to co mbine the EKI-2525P and metal mounting kit.
EKI-2525P_ Manual_ed 1 14 2.3.2 DIN-rail Mounting You can also mount EKI-2525P on a st a ndard DIN-rail by below steps. The DIN-rail kit is screwed on the industrial sw itch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first.
15 C hapter2 Then, let the device down straight to slide over the rail smoothly. See Figure 2.7 Figure 2.7: Installation to DIN-rail Step 2.
EKI-2525P_ Manual_ed 1 16 2.4 Network Connection The EKI-2525P has 5 x RJ-45 ports that supp ort connection to 10 Mbps Ethernet, or 100 Mbps Fast Ethernet, and half or fu ll duplex operation. EKI-2525P can be connected to other hubs o r switches through a twisted-pai r straight through th e cable or a crossover cable up to 100m long.
17 C hapter2 Troubleshooting CHAPTER.
EKI-2525P_ Manual_ed 1 18 Chapter 3 Troubleshooting 1. Power Input Verify that is using the right power cord/adapter 48 V DC , please don’t use the power adaptor with DC output voltage higher than 48V , or it will burn this converter down. 2. Cable Select the proper UTP ca ble to construct user network.
19 C hapter2 Pin Assignment & Wiring APPENDIX.
EKI-2525P_ Manual_ed 1 20 Appendix A Pin Assignment & Wiring It is suggested to adopt ELA/TIA as the wiring of the RJ-45. Figure A.1: RJ-45 Pin Assignment Figure A.
An important point after buying a device Advantech EKI-2525P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Advantech EKI-2525P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Advantech EKI-2525P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Advantech EKI-2525P you will learn all the available features of the product, as well as information on its operation. The information that you get Advantech EKI-2525P will certainly help you make a decision on the purchase.
If you already are a holder of Advantech EKI-2525P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Advantech EKI-2525P.
However, one of the most important roles played by the user manual is to help in solving problems with Advantech EKI-2525P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Advantech EKI-2525P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
