Instruction/ maintenance manual of the product P-Touch PT-2430PC Brother
Go to page of 2
Getting Ready INTRODUCTION Thank you for choosing the PT-2430PC. Y our new P-touch labeller uses P-touch Editor Lite software, which is already installed on your labeller. There is no need to install any software or drivers onto your PC in order to make creative labels.
www .brother.com Solution P-touch Editor Lite Creating Labels Command T oolbar Property T oolbar When margins are set to Large , (default setting) labels print with approx. 25mm margins on each side of the printed text. Reduce this margin by changing the setting to Small .
An important point after buying a device Brother P-Touch PT-2430PC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brother P-Touch PT-2430PC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brother P-Touch PT-2430PC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brother P-Touch PT-2430PC you will learn all the available features of the product, as well as information on its operation. The information that you get Brother P-Touch PT-2430PC will certainly help you make a decision on the purchase.
If you already are a holder of Brother P-Touch PT-2430PC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brother P-Touch PT-2430PC.
However, one of the most important roles played by the user manual is to help in solving problems with Brother P-Touch PT-2430PC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brother P-Touch PT-2430PC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
