

| Cloud platfor m with Wi-Fi connection
| Fr ee of char ge
| Ready to use
| Easy to install solution
User manual: Pr ofessional solution for the r emote management of r efr iger ated units and food equipment
| Remote unit configuration
| Pr otected multi-unit and multi-user access
| Responsive design

I M PORTANT Read this document thor oughly befor e installation and befor e use of the device and follow all r ecommendations; keep this document with the device for futur e consultation. Only use the device in the way descr ibed in this document.
CONSI DER THE ENVI RONM ENT Please r ead car efully and save this document

| Operating diagram - example 6
| How to get started 7
| Home page 8 |Heading 8 |Oper ation ar ea 10
| Configuration and monitoring functions 11 |Real time 12 |Ser vice 12 |Pr ograms 13 |Alar ms 13 |Parameter s 14 |History 15 |Gr aph 16



EPoCA is a r emote monitor ing system based on a cloud platfor m which meets the needs of the food pr eser vation and cooking sector , fr om r efr iger ated units to food equipment.
All that is needed is a simple onsite Wi-Fi inter net connection to enable EVCO controllers, using EVlink Wi-Fi modules, to connect to the cloud system, making it possible to r emotely manage equipment fr om a PC, tablet or smar tphone.
The r esponsive design and the gr aphic inter face conceived to pr ovide a pleasant user exper ience make EPoCA a r eady-to-use solution for easily accessible monitor ing oper ations, even for entr y-level user s, while offer ing all the typical functions of pr ofessional platfor ms.
With appr opr iate pr otection measur es for access and data, the system makes it possible for one or mor e enabled user s to oper ate r emotely on the unit to configur e its par ameter s, view HACCP data (also in gr aphic for m) and to download r ecor ds in the most popular for mats, such as XLSX, CSV and PDF.
The functions playing a key r ole include alar m war nings sent automatically by the system to selected e-mail addr esses.



Make sure to car efully r ead the installer manual befor e star ting any wiring and configur ation. Check the download section at http:/ / www.evco.it/ en/ 16215-epoca
The configur ation of your EVlink Wi-Fi shall be per formed fr om a device with Wi-Fi connectivity in the following ways: 1. Via inter net browser Please refer to the installer manual for instr uctions Check the download section at http:/ / www.evco.it/ en/ 16215-epoca
Once the configur ation of your EVlink Wi-Fi module has been completed, a "plant file" will be available on your device.
A group of EVCO contr olled units, namely a "plant", can be created simply by uploading the fir st "plant file" in the configur ation page of each additional EVlink Wi-Fi you want to add in the same plant. You can gr oup them accor ding to your needs.
app “.bin” app
Plant file Devices with Wi-Fi connectivity
If you want to add EVCO contr olled units to an existing plant, you just need to upload the same “plant file” in all EVlink Wi-Fi modules. The units will be automatically detected.

file” 1 2 3
Devices with Wi-Fi connectivity Evlink Wi-Fi Evlink Wi-Fi Evlink Wi-Fi
Now open your inter net browser and go to https:/ / epoca.cloud/ If you have not cr eated your EPoCA account yet, besides pr oducing username and passwor d, it is mandator y to upload at least one "plant file" and the r elative plant passwor d. If you alr eady have an EPoCA account, you can add fur ther plants, pr ovided you have the r elative “plant file” along with the plant passwor d. If you don’t r emember the passwor d click the link Lost your password? Click here, digit your username and on afterwards click the link SEND RESET REQUEST VIA EMAIL: an email (to the addr ess you have set while cr eating the account) with a link to change the passwor d will be sent. If you don’t remember your username and/ or the email has been removed fr om the account, it is necessar y to contact EVCO.
App “.bin”
Devices with Wi-Fi connectivity Plant file Remote PC or mobile device

Fr om your EPoCA account, you are entitled to r emotely view the status of all the units associated to your account, provided that they ar e switched on and the internet connectivity is wor king. Below is an example of what the EPoCA home page will display:
Oper ation ar ea
Below is an over view of the functions available on the home page heading
Go to home page
Upgr ade the status and discover new units
Loading...
You can add fur ther plants in your EPoCA account, simply by uploading the new “plant file” available after EVlink Wi-Fi configur ation


The “Settings” menu includes the following functions: – Rename the plant – Delete plants and units – Download plant files
The “Account” menu includes the following functions: – Add/ delete email accounts as recipients of messages and aler ts – Set the type of messages the r ecipients shall r eceive
The “Alar m” menu includes the following functions: – Enable/ disable plants/ units to send aler ts on r eal time events – Enable/ disable/ delay off-line aler ts
Number of offline units
Filter by unit name
You can choose to display the desired unit through this filter
To view wher e the alar m is occur ring, pr ess on this button
Number of connected units in the plant

This ar ea shows all the unit configur ation and monitor ing options available to user s
Gener al info and configuration
This ar ea includes info and gener al configur ation functions
Unit par ameter map
This ar ea shows an overwiew of the unit par ameter s and settings. It is a r ead-only ar ea available also in off-line mode
Set unit access level
This ar ea gives the possibility to modify your unit access level, provided you enter the unit passwor d
Set unit time and date
This ar ea enables user s to adjust unit time and date
This ar ea shows whether the unit is set for sending aler ts to your email account
Wi-Fi signal r ange
This ar ea shows the r ange of the Wi-Fi signal
This ar ea shows the unit most significant value (usually temper atur e) cur r ently detected
Unit configur ation and monitoring
This is the main wor king area with a function menu for each unit. For mor e details see the following chapter “Configur ation and monitoring functions”
Notification status · Main unit value

This ar ea shows all the connected units listed with their own names under the plant they belong to. Each unit has its own menu for r emote configur ation and monitor ing functions and the user can perfor m oper ations according to his per sonal access level.
When menus include values which can be modified by the user , they ar e mar ked by the following symbol:
When this symbol is displayed and active, the r elative value can be modified by the user
You can change the setup by enter ing/ selecting the desir ed value and confirming on the SEND button
Pencil

This menu gives an over wiew of the main curr ent data of the unit and enables user s to modify some of the setups.
Descr iption Label Value
7.7°C Set1 Setpoint
This menu gives a mor e compr ehensive over wiew of the device curr ent data and enables user s to modify some of the setups.
Descr iption Label Value
7.7°C Set1 Setpoint
Real time · Ser vice

This menu enables the user to modify the working progr ams available in the unit. All the values can be edited as needed. Should the unit suppor t the r emote cycle start/ stop function, a dedicated field will be available within this menu.
Descr iption Label Value
10h tdr p Dripping Time
This menu will be displayed in the unit “oper ation ar ea”only when an alarm is in progr ess. To view which alarm is occur ing, enter this menu.
Descr iption Label Status
Auxiliary Probe Alarm Pr 3 Active
Progr ams · Alarms

This menu gives access to the complete list of the unit parameter s. All the values can be modified by author ized user s to set up the unit as needed.
Descr iption Label Cur r ent Modified
NTC NTC PO Probe Type
All the values modified in this menu will be sent to the unit only after you pr ess this button
Data are being tr ansfer r ed to the unit
Other functions for par ameter s menu
Some additional functions ar e available on the menu top ar ea
Number of modified values - Sync
The button displays the number of modified values. By pr essing on the “SYNC” button, all the new setups will be sent to the unit
This ar ea enables the user to: – download the par ameter map in Excel format – save curr ent/ modified par ameter in a backup file – impor t the backup file into another compatible unit
Par ameter s · Upgr ade · Expor t data

This menu enables the user to display the histor ical r ecordings in a table form. Time inter val and values to be displayed can be fr eely filter ed by the user . If an alar m occurr ed in the selected inter val time, the table r ow will be displayed in r ed colour .
Procedure to select the table
When you enter the “histor y” menu, this window will pop up
Select the start date
Select the end date
Select filter to view the histor y table
Once the table is displayed, other functions are available:
You can choose a different time inter val for your table
You can choose what values you want to display in your table
You can select differ ent for mats for expor ting or pr inting your table file
Histor y

This menu enables the user to display the histor ical r ecordings in a gr aph form. Time inter val and values to be displayed can be fr eely filter ed by the user . If an alar m occurr ed in the selected inter val time, the ar ea will be displayed in r ed colour .
Procedure to select the graph
When you enter the “gr aph” menu, this window will pop up
Select the start date
Select the end date
Select filter to view the histor y gr aph
Once the graph is displayed, other functions are available
You can choose a different time inter val for your gr aph
You can view your gr aph in a full-scr een mode and you can select differ ent formats for expor ting or printing your gr aph file
You can choose what values you want to display in your gr aph simply by selecting/ deselecting the desir ed values

By positioning the selector on the graph line, you can display the value r ecord in a specific time
Gr aph



EVCO S.p.A. Via Feltr e 81, 32036 Sedico (BL) ITALY | Tel. +39 0437 8422 | Fax +39 0437 83648 | e-mail [email protected] | web www.evco.it
This document and the solutions contained ther ein ar e the intellectual pr oper ty of EVCO and thus pr otected by the Italian Intellectual Pr oper ty Rights Code (CPI). EVCO imposes an absolute ban on the full or par tial r epr oduction and disclosur e of the content other than with the expr ess appr oval of EVCO. The customer (manufactur er , installer or end-user ) assumes all r esponsibility for the configur ation of the device. EVCO accepts no liability for any possible er r or s in this document and r eser ves the r ight to make any changes, at any time without pr ejudice to the essential functional and safety featur es of the equipment.
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.