Instruction/ maintenance manual of the product FD-502Ae Brickcom
Go to page of 33
Hardware Use r ’ s Manua l Megapixel Day & Night Fixed Dome Network Camera Quality Service Grou p Fixed Dome Serie s.
Review Histor y: 1. Sep arate User Manual into HW and SW . 2. Merge FD-300Ap/ FD- 130N / FD -132N/ F D-300 A / FD-302A/ FD-500A/ FD -502A series into this User Manual.
T able of Conten Before Y ou Use This Product ....................................................................................... 1 Regulatory Information ............................................................................................
1 Before Y ou Use This Pr oduct In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high -performance, web-rea dy came ra which can be part of a flexible surveillance system.
2 Regulatory Informati on Federal Commu nication Commission I nterference State ment This e quipment has been tested and fo und to comply with the limits for a Class B d igital device, p ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection ag ainst harmful interference in a residenti al installation.
3 Chapter 1 - Package Content s a. Netw ork Camera (Fixed Dome series) b. T erminal Block c. Product CD d. Loca tion Stick er e. W arranty Card f. Screw Bag g.
4 Chapter 2 - Fixed Dome Network Camera Overview The FIXED DOME SERIES is a full -featured, 3-axis, f ixed-dome, network camera. W ith a megapixel progressive sensor and built -in IR-cut filter/ IR illuminator LEDs/ Auto Light se nsor , it can provide 24 -hour , indoor surveillance.
5 Chapter 3 - Device App earance Description 1. Below “ Device A ppearance Description ” is for FD -20 0Np V6 / FD-202Ne V6 / FD -300Np St ar/ FD-302Ne S t ar/ FD-502 Ap V6 / FD-502 A e V6 2.
6 3. Below “ Device A ppearance Description ” is for FD-300Ap 4. Below “ Device A ppearance Description ” is for FD-501Af-series RJ45 Connector Reset Button T erminal Block (For Audio in/out, .
7 NOTE 1. SD Card Cap acity (*) - The network ca mera is compa tible with SD /SDHC/SDXC (Maximum 64 GB) cards. 2. (*) These are o ptional features. Please refer to the Product List fo r the full list of optional features available for the product.
8 Chapter 4 - LED Behavior Function LED Behavior Description Power LED Continuous illumination (Green) Power on Power LED Unit Power off Link LED Continuous illumination (Red) Link Link LED Blinking (.
9 < Hardware Reset > The Reset Button can be used to re boot the camera, restore it to factory default settings , or switch on FocusEasy . If the camera e xperiences a p roblem, rebooting the ca mera may correct the problem. If the problem remains, please restore the camera to factory default settings and reinstall the s oftw are.
10 Chapter 5 - Inst allati on 5.1 Hardw are Inst allation A. Remov e the dome cover from the camera device l. PoE, Power , DIDO, A udio Connection 1) Insert the PoE(1) / DC1 2V(2), DIDO and Audio cabl e(3) through con duit hole A o r B.
11 a. PoE, Power , DIDO, A udio Connection ii. Connect the PoE ( 1) / DC 12V (2), DIDO and Audio (3) Cables to their respective terminals. See the next page for more details regarding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power A dapter Connection Please refer to the definition of the terminal blocks below .
12 3) DIDO and A udio Connection Please refer to the definition of the terminal blocks below . It is also printed on the motherboard. Term inal Block Pin No. Function Pin 1 5V / 12V* Pin 2 D_0 Pin 3 D_I Pin 4 DIDO GND Pin 5 Audio OUT Pin 6 DGND Pin 7 Mic/Line in Pin 8 DGND *V5&V6 (W DRPro & S tar & S tarPlus) Series Supported ll.
13 3) Hammer the four plastic anchors which are provided in the product package into the tw o location holes. 4) Mount the camera on the wall and position to two screw slots over the plastic anchors. Insert the screams into the holes and use the screwdriver to tighten the screws clockwise until they are secure.
14 C. For ceiling install ation: The user needs the two screws which are included in the product p ackage and a screw driver . Moun t the c amera on th e desired location a nd use the screwdriver to tighten the screws clockwise through the two holes on each side of the device as shown below .
15 ii. Release the tilt screw on both side of the device and then rotate the lens to up or down. After completion, tighten the tilt screw. iii. Release th e video adjustment screw and then adjust the lens direction. After completion, tighten the video adjustment screw.
16 b. How to adjust the view angle and focus range i. Release the view angle controller and then moving the controller bar le ft or right to a djust the view angle. Af ter completion, tighten the view angle controller. ii. Release the focus controller and then moving the con troller bar left or right to adjust the focus ra nge.
17 5.2 Camera Connection F. Basic Connection (Withou t PoE) a. Connect the power adaptor to the camera dev ice. b. Connect the camera to the Ethernet hub using a RJ45 Ethernet cable. G. Power over Ethernet (PoE) Connection a. Connect the camera to a PoE-enabled hub via single Ethernet cable.
18 5.3 System Requirement s Operating System: Microsoft W indow s 8.1/8 /7/Vist a/XP/2000/ Computer: IBM PC/A T Compatible CPU: Pentium 3GHz or faster Memory: 1024 MB or more Monitor: 1024 x 768 pixel.
19 5.4 Sof t w are Inst allation In this m anual, "User" refers to whoever h as access to the Network Camera, and "Administrator" refers to the person who ca n configure the camera and grant user access to the camera.
20 B. In the Inst all Shield Wizard dialog box, click <Next> to continue. C. Read the End- User License Agreement and che ck the option “I accept the terms of the license agreement”.
21 D. Click <Change> to change the a ppointed folder w here inst allation and program files will be stored. Click <Next> to continue. E. Select to create shortcuts.
22 F. Select the application and click <Finish> . When launching the PC-NVR program, please refer to the PC-NVR user manual..
23 5.4.1 Eas y Config T o launch EasyConfig, select EasyConfig from the start menu. If Comp lete Setup type w as use d in the softw are installation, an EasyConfig icon was installed on the desktop.
24.
25 B. Select e ither “S imple M ode ” or “P rofessional M ode ” to obtain the camera’ s IP sett ings. If “S imple M ode ” is selected, EasyConfig will set u p the connection automatically . I f “P rofessional Mode ” is selected, the user will need to configure the IP settings manually .
26 C. There may be many cameras in the local network. Dif ferentiate the cameras using their UPnP name. Double click on the camera from the survey list to connect.
27 If <Set IP Address configuration manually> is selected, the following pages will be displayed..
28 E. If the camera support s the EasyLinkTM function , the following p age will be displayed. Ot herwise, this page w ill not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom f unction which allo ws users to assign a unique EasyLink name to th eir network ca mera’ s IP address.
29 F. W hen the IP address settings have been configured , the screen will either display a successful or fa iled connection message. If the connection failed, either try again or quit the installation. a. If “ DHCP IP address settings” was selected, the failure page will be displayed as below: b.
30 c. If the connection was successfu l, the user will see the message: “Congratulations. The installation of the ca mera is complete.” W hen this window is displa yed, click <PC-NVR> to sta.
An important point after buying a device Brickcom FD-502Ae (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brickcom FD-502Ae yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brickcom FD-502Ae - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brickcom FD-502Ae you will learn all the available features of the product, as well as information on its operation. The information that you get Brickcom FD-502Ae will certainly help you make a decision on the purchase.
If you already are a holder of Brickcom FD-502Ae, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brickcom FD-502Ae.
However, one of the most important roles played by the user manual is to help in solving problems with Brickcom FD-502Ae. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brickcom FD-502Ae along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center