Instruction/ maintenance manual of the product FD-130Ae Brickcom
Go to page of 32
Hardware Use r ’ s Manua l Megapixel Day & Night Fixed Dome Network Camera Quality Service Grou p Fixed Dome Serie s.
Review Histor y: 1. Sep arate User Manual into HW and SW . 2. Merge FD-300Ap/ FD- 130N / FD -132N/ F D-300 A / FD-302A/ FD-500A/ FD -502A series into this User Manual. Product name: Network Camera (Fixed Dome se ries) Release Date: 201 3/01 Manual Revi sion: V3 .
T able of Conten t s Before Y ou Use This Product ....................................................................................... 1 Regulatory Information ........................................................................................
1 Before Y ou Use This Pr oduct In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high -performance, web-rea dy came ra which can be part of a flexible surveillance system.
2 Regulatory Informati on Federal Commu nication Commission I nterference State ment This equipment has been tested and fo und to comply with the limits for a Class B digital device, p ursuant to Part 15 of the FCC Rules. These limits a re designed to provide reasonable protection ag ainst harmful interference in a residenti al installation.
3 Chapter 1 - Package Content s a. Netw ork Camera (Fixed Dome series) b. T erminal Block c. P roduct CD d. Location Sticker e. Warranty Card f. Screw Bag g.
4 Chapter 2 - Fixed Dome Networ k Camera Overview The FIXED DOME SERIES is a full-fe atured, 3-axis, f ixed-dome, n etwork camera. W ith a megapixel progressive sensor and b uilt -in IR-cut f ilter/ IR illuminator LEDs/ Auto Light se nsor , it can provide 24 -hour , indoor su rveillance.
5 Chapter 3 - Device Appearan ce Description 1. Below “ Dev ice A ppearance Description ” is for FD-130Np/ FD -1 32Np/ FD -300A p V3/ FD -302Ap/ FD -500Ap/ FD -502A 2.
6 3. Below “ Device A ppearance Description ” is for FD-501Af-series NOTE 1. SD Card Cap a city (*) - The netw ork camera i s comp atible with SD /SDHC (Maximum 32GB) cards. 2. (*) These are o ptional features. Please refer to the Product List for the full list of optional features available for the product.
7 Chapter 4 - LED Behavior Function LED Behavior Description Power LED Continuous illumination (Green) Power on Power LED Unit Power off Link LED Continuous illumination (Red) Link Link LED Blinking (.
8 < Hardware Reset > The Reset Button can be used to reboot the camera o r restore it to factory d efault settings. If the camera experiences a problem, rebooting the camera may correct the problem. If the prob lem remains, please restore the camera to f actory default settings and reinstall the sof tware.
9 Chapter 5 - Inst allation 5.1 Hardw are Inst allation A. Remov e the dome cover from the camera device l. PoE, Power , DIDO, A udio Connection 1) Insert the PoE(1) / DC1 2V(2), DIDO and Audio cabl e(3) through con duit hole A o r B.
10 a. PoE, Power , DIDO, A udio Connection ii. Connect the PoE (1)/ DC 12V (2), DIDO and A udio (3) Cables to their respective terminals. See the next p age for more de tails reg arding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power A dapter Connection Please refer to the definition of the terminal blocks below .
11 ll. For SD/ SDHC card (*) installation: NOTE – The SD/SDHC card is not included in the product p ackage and needs to be purchased sep arately . B. For wall inst allation: 1) Chose the location on the wall to place the camera. Attach the location sticker to the desired spot.
12 4) Mount the camera on the wall and position to tw o screw slots over the plastic anchors. Insert the screams into the holes and use the screwdriver to tighten the screws clockwise until they are secure. 5) Place the dome cover back on the camera dev ice.
13 C. For ceiling install ation: The user needs the two screws which are in cluded in the product package and a screw driver . Moun t the c amera on th e desired location a nd use the screwdriver to tighten the screws clockwise through the two holes on each side of the device as shown below .
14 ii. Release the tilt screw on both side of the device and then rota te the lens to up or down. After completion, tighten the tilt screw. iii. Release the video adjustment screw a nd then adjust the lens direction. After completion, tighten the video adjustment screw.
15 b. How to adjust the view angle and focus range i. Release the view angle controller and then mo ving the controller bar left or right to adjust th e v iew a ngle. Af ter complet ion, tighten the view angle controller. ii. Release th e focus controller and then moving the controller bar left or right to adjust the focus ran ge.
16 5.2 Camera Connection F. Basic Connection (Withou t PoE) a. Connect the power adaptor to the camera device. b. Connect the camera to the Ethernet hub using a RJ45 Ethernet cable. G. Power over Ethernet (PoE) Connection a. Connect the camera to a PoE-enabled hub via single Ethernet cable.
17 5.3 System Requirement s Operating System: Microsoft W indow s XP Home Edition SP2 Microsoft W indow s XP Professional SP2 Computer: IBM PC/A T C ompatible CPU: Pentium 3GHz or faster Memory: 1024 .
18 5.4 Sof t w are Inst allation In this manual, " User" refe rs to whoever has access to the Network Camera, and "Administrator" refers to the person w ho can co nfigure the camera and grant user access to the camera.
19 B. In the Inst all Shield W iz ard dialog box, click <Next> to continue. C. Read the End- User License Agreement and che ck the option “I accept the terms of the license agreement”.
20 D. Click <Change> to change the a ppointed folder w here inst allation and program files will be stored. Click <Next> to continue. E. Select to create shortcuts.
21 F. Select the application and click <Finish> . W hen launching the PC-NVR program, please refer to the PC-NVR user manual..
22 5.3.1 Eas y Config T o launch EasyConfig, select EasyConfig from the start menu. If Comp lete Setup type w as use d in the softw are installation, an EasyConfig icon was installed on the desktop.
23.
24 B. Select e ither “S imple M ode ” or “P rofessional M ode ” to o btain the camera’ s IP settings. If “S imple M ode ” is selected, EasyConfig will set u p the connection automatically . I f “P rofessional Mode ” is selected, the user will need to configure the IP settings manually .
25 C. There may be many cameras in the local network. Dif ferentiate the cameras using their UPnP name. Double click on the camera from the survey list to connect.
26 If <Set IP Address configuration manually> is selected, the following pages will be displayed..
27 E. If the camera support s the EasyLinkTM function , the following p age will be displayed. Ot herwise, this page w ill not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom function which allo ws users to assign a unique EasyLink name to their network camera’s IP address.
28 F. W hen the IP address sett ings have been configured , the screen will eithe r display a successful or fa iled connection message. If the connection failed, either try again or quit the installation. a. If “ DHCP IP address settings” was selected, the failure page will be displayed as below: b.
29 c. If the connection was successful, the user will see the message: “Congratulations. The installation of the camera is complete.” W hen this window is displa yed, click <PC-NVR> to start.
An important point after buying a device Brickcom FD-130Ae (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Brickcom FD-130Ae yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Brickcom FD-130Ae - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Brickcom FD-130Ae you will learn all the available features of the product, as well as information on its operation. The information that you get Brickcom FD-130Ae will certainly help you make a decision on the purchase.
If you already are a holder of Brickcom FD-130Ae, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Brickcom FD-130Ae.
However, one of the most important roles played by the user manual is to help in solving problems with Brickcom FD-130Ae. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Brickcom FD-130Ae along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
