


User Guide

Our main office (UK, Europe):
The Software Centre PO Box 2000, Nottingham, NG11 7GW, UK
Customer Service/ Technical Support:
North American office (USA, Canada):
Serif Inc., The Software Center, 4041 MacArthur Blvd., Suite 120, Newport Beach, CA 92660, USA
Visit us on the web at: http://www.serif.com/
Please contact your local distributor/dealer. For further details, please contact us at one of our phone numbers above.

This User Guide, and the software described in it, is furnished under an end user License Agreement, which is included with the product. The agreement specifies the permitted and prohibited uses.
Portions images © 1997-2002 Nova Development Corporation; © 1995 Expressions Computer Software; © 1996-98 CreatiCom, In.; 1996 Cliptoart; © 1997 Multimedia Agency Corporation; © 1997-98 Seattle Support Group. Rights of all parties reserved.
Digital Images ©2008 Hemera Technologies Inc. All Rights Reserved.
Digital Images ©2008 Jupiterimages Corporation, All Rights Reserved.
Digital Images ©2008 Jupiterimages France SAS, All Rights Reserved.
Bitstream Font content © 1981-2005 Bitstream Inc. All rights reserved.
Panose Typeface Matching System ©1991, 1992, 1995-97 Hewlett-Packard Corporation.
Portions graphics import/export technology © AccuSoft Corp. & Eastman Kodak Company & LEAD Technologies, Inc.
THE PROXIMITY HYPHENATION SYSTEM © 1989 Proximity Technology Inc. All rights reserved.
THE PROXIMITY/COLLINS DATABASE © 1990 William Collins Sons & Co. Ltd.; © 1990 Proximity Technology Inc. All rights reserved.
THE PROXIMITY/MERRIAM-WEBSTER DATABASE © 1990 Merriam-Webster Inc.; © 1990 Proximity Technology Inc. All rights reserved.
The Sentry Spelling-Checker Engine © 2000 Wintertree Software Inc.
The ThesDB Thesaurus Engine © 1993-97 Wintertree Software Inc.
WGrammar Grammar-Checker Engine © 1998 Wintertree Software Inc.
Extensible Metadata Platform (XMP) Copyright © 2006 Adobe Systems Incorporated. All rights reserved.
FontForge © 2000,2001,2002,2003,2004,2005,2006,2007,2008 by George Williams.
Portions of this software are copyright © 2008 The FreeType Project (www.freetype.org). All rights reserved.
ODF Translator © 2006-2008, Clever Age, DIaLOGIKa, Sonata Software Ltd. All rights reserved.
Office Binary Translator to OpenXML Copyright © 2008-2009, DIaLOGIKa. All rights reserved.
Anti-Grain Geometry - Version 2.4 Copyright © 2002-2005 Maxim Shemanarev (McSeem)
Clipart samples from Serif ArtPacks © Serif (Europe) Ltd. & Paul Harris
TrueType font samples from Serif FontPacks © Serif (Europe) Ltd.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks acknowledged.
PagePlus is a registered trademark of Serif (Europe) Ltd.
© 2010 Serif (Europe) Ltd. All rights reserved. No part of this User Guide may be reproduced in any form without the express written permission of Serif (Europe) Ltd.
Serif PagePlus Essentials © 2010 Serif (Europe) Ltd.









2 Welcome

Welcome to PagePlus Essentials, the affordable and easy way to design and print high quality calendars, stationery, newsletters, signs, notices, invites, and cards. Share as hardcopy print or by electronic PDF—the choice is yours!
Instead of starting from scratch, PagePlus comes with an impressive selection of design templates, creative gallery content, and styles for you to use. You'll also be able to reuse existing content by importing word processing documents.
PagePlus Essentials doesn't just stop at that. Its range of design studios makes PagePlus stand out from the crowd—Image Cutout Studio for cutting pictures out from their backgrounds, LogoStudio for custom logo design, and PhotoLab for powerful image adjustment and effect combinations. You simply cannot afford to miss them!
For a more detailed summary of what PagePlus can offer, see Key features (p. 4).
Don't forget to register your new copy, using the Registration Wizard, on the Help menu. That way, we can keep you informed of new developments and future upgrades!
Welcome 3

Before you get started with PagePlus, we recommend you take the opportunity to familiarize yourself with PagePlus key features and capabilities.
4 Welcome · Ease of Use · Layout

Welcome 5 · Pictures

6 Welcome · Creativity

Welcome 7

8 Welcome · Text

Easily swap all selected instances of a common font for another font in one fell swoop!
Welcome 9 · Publishing and Sharing

Minimum:
Additional disk resources and memory are required when editing large and/or complex documents.
Optional:
10 Welcome

To install PagePlus Essentials simply insert the PagePlus Essentials Program DVD into your DVD drive. The AutoRun feature automatically starts the Setup process. Just answer the on-screen questions to install the program.
To re-install the software or to change the installation at a later date, select Settings/Control Panel from the Windows Start menu and then click on the Add/Remove Programs icon. Make sure the PagePlus Essentials Program DVD is inserted into your DVD drive, click the Install… button and then simply follow the on-screen instructions.
Welcome 11

12 Welcome


14 Getting Started

The Startup Wizard presents the following choices:
*Startup Wizard may differ in your program.
Use the Choose Workspace drop-down menu to choose your workspace appearance (i.e., Studio tab positions, tab sizes, and show/hide tab status). You can adopt the default workspace profile <Default Profile>, the last used profile <Current Profile>, a range of profile presets, or a workspace profile you have previously saved.
Getting Started 15

As you select different profiles from the menu, your workspace
will preview each tab layout in turn.
The Startup Wizard is displayed by default when you launch PagePlus. If you don’t want to use the Startup Wizard again, check the “Don't show this wizard again” box. You can switch it on again via the Use startup wizard check box in Tools>Options... (use Options>General menu option).
You can also access the Startup Wizard at any time from
New>New from Startup Wizard... on the File menu.
PagePlus comes complete with a whole range of design templates which will speed you through the creation of all kinds of publications!
Templates also help ensure continuity between your pages by preserving such elements as page layout, contents, styles, and color palettes. They also offer quality pictures that you can use royalty free.
16 Getting Started

Instead of a design template, you can adopt a Theme Layout instead; layouts offer picture placeholders instead of actual pictures. Different physical document types (Brochure, Business Cards, Flyer, Newsletter, etc.) can be created from a chosen theme (e.g., Arctic), each type offering a choice of complementary multiple page designs.
Once selected, the publication is normally all but complete apart from adding your own pictures to placeholders, personalizing placeholder text, or fine-tuning object positioning.
To create a publication from a design template:

Getting Started 17

If you're happy with the template pages, click Open.
18 Getting Started

To create a publication from a themed layout:
Getting Started 19

As each template is color schemed, you can swap the underlying scheme, and the publication's appearance, for another scheme at any time!
Although design templates can simplify your design choices, you can just as easily start out from scratch with a new, blank publication. To make life easier you can adopt a particular document type (regular/normal, folded, small/large publication) as a starting point.
To start a new publication (via Startup Wizard):
20 Getting Started

You can define a custom publication by clicking Custom Page Setup....
(or press Escape) from the Startup Wizard, PagePlus opens a blank document using default page properties.
To start a new default publication:
New Publication on the Standard toolbar (only if Startup Wizard is turned off).
You can open a PagePlus publication from the Startup Wizard, Standard toolbar, or via the File menu.
To open an existing publication from the Startup Wizard:
Tthe dialog offers Print and Publish to PDF options without loading the selected publication, plus Sort and Filtering options to change your view.
To open existing publications from within PagePlus:
Open on the Standard toolbar.
Getting Started 21 · If you click

To revert to the saved version of an open publication:
PagePlus supports automatic and manual font substitution if you open a publication which uses fonts which are not stored on your computer. See PagePlus help for more details.
If you have multiple publications open at the same time it's easy to jump between them using different methods.
Click on an open publication's tab on the Publications toolbar at the top of the workspace to make it active (e.g., Rosette.ppp).

Alternatively, you can select the name of a currently open publication from the Window menu. Unsaved publications are indicated by an asterisk; the currently active publication is shown with a tick.
To save your work:
Save on the Standard toolbar.
Unsaved publications have an asterisk after their name in either
the PagePlus title bar or Window menu.
22 Getting Started

To close the current publication:
Close button. If it's the only window open for the publication, the command closes the publication and you'll be prompted to save changes.
To close all publications except current:

To close PagePlus:
Close button at the top right of the window.
You'll be prompted to save changes to any unsaved publications.
Getting Started 23

Object defaults are the stored property settings PagePlus applies to newly created objects such as:
You can easily change the defaults for any type of object via the Update Object Default command or the Text Style Palette dialog.
Default settings are always local—that is, any changed defaults apply to the current publication and are automatically saved with it, so they're in effect next time you open that publication. However, at any time you can use the Save Defaults command to record the current defaults as global settings that will be in effect for any new publication you subsequently create.
To set local defaults for a particular type of object:
Or, for line and fill colors, including line styles:
24 Getting Started

To view and change default text properties:
To save all current defaults as global settings:
Getting Started 25

26 Getting Started


28 Working with Pages

Working with Pages 29
A publication's page size and orientation settings are fundamental to your layout, and are defined when the new publication is first created, either using a design template or as a New Publication choice via File>New... and the Startup Wizard. If the Startup Wizard is turned off, or you cancel the setup dialog, a new publication is created to a default page size.
To adjust size/orientation of the current publication:
from the Pages context toolbar.
For regular/booklet publications, you can also adopt printer-derived paper sizes that are supported by your desktop or network printer. These paper sizes are shown in the Page Setup dialog and will be different depending on which printer is currently chosen in the Print dialog.
On the Pages context toolbar, these page sizes are indicated by
the suffix "(From printer)" in the Paper size drop-down menu.

30 Working with Pages
You can set up your regular publication or booklet so that the PagePlus window displays pages either singly or in pairs—as two facing pages side by side. You'll need facing pages if you're creating a publication where you need to see both the left-hand (verso) and right-hand (recto) pages, or one that employs double-page spreads where a headline or other element needs to run from the left-hand page to the right-hand page.
If you set up a publication to use facing pages, you can specify either a single or dual master page. A single master page is (as the name implies) a single page; a dual master page is a spread with both a left- and right-page component, allowing you to run elements across the spread in the background of the publication, or position left-side page numbers and right-side page numbers at opposite corners. The Pages tab shows single master pages with a standard page thumbnail, and dual master pages with a split-page thumbnail.
To set up facing pages:
Because you assign master pages to individual page layers, one page at a time, it takes two separate steps to assign a dual master page to both left and right facing pages. For details, see Assigning master pages on p. 37.
You can assign different master pages to the left and right publication pages if necessary. For example (see below), a left-hand "body text" page might use the left-side component of one master page, while a right-hand page could use the right side of a different master page.

Working with Pages 31
Master pages provide a flexible way to store background elements that you'd like to appear on more than one page—for example a logo, background, header/footer, or border design.
The key concept here is that a particular master page is typically shared by multiple pages, as illustrated below. By placing a design element on a master page and then assigning several pages to use that master page, you ensure that all the pages incorporate that element. Of course, each individual page can have its own "foreground" elements.

32 Working with Pages
Master pages are available in every publication, but in a simple publication you may not need to use any master pages—or you may need only one master page. Facing pages and multiple master pages prove valuable with longer, more complex publications.
Using the Pages tab or Page Manager, you can quickly add or delete master pages; for example, you could set up different master pages for "title" or "chapter divider" pages. For details, see Adding, removing, and rearranging pages on p. 36.
Most of the PagePlus display is taken up by a page or "artwork" area and a surrounding "pasteboard" area.

Working with Pages 33
In PagePlus, the Page area is where you put page layout guides, and of course the text, shapes, and pictures that you want to print. The Pasteboard area is where you generally keep any text, shapes, or pictures that are being prepared or waiting to be positioned on the page area.
If you'd like a different pasteboard color for a different look or, more practically, if you want to stop your off-page objects from contrasting with the existing color, you can set this via Tools>Options>Layout>Display.
To move or copy an object between pages via the Pasteboard:
PagePlus makes it easy to see exactly what you're working on—from a wide view of multiple pages to a close-up view of a small region. For example, you can use the scroll bars at the right and bottom of the main window to move the page and pasteboard with respect to the main window. If you're using a wheel mouse, you can scroll vertically by rotating the wheel, or horizontally by Shift- scrolling.
For magnification options, the View toolbar provides the:
Zoom Out tools so you can inspect and/or edit the page at different levels of detail.
Zoom Percent option to set a level of magnification (expressed as a percentage).
Zoom Tool to zoom into an area defined by a drawn marquee selection.
Zoom In and

34 Working with Pages
Pan Tool for moving the page area by dragging.
Actual size option for viewing the page at its true size (100%).
Zoom to selection option to focus on a selected area.
Page Width option to fit to the page's width.
Full Page option to fit the page into your current window.
Multi-page option to view multiples pages simultaneously (set page number by dragging a page array from the flyout menu).
You can switch between different view modes, which offer single or multiple pages to view:
In Normal and Multi-page view, the pasteboard is shared by all pages. In Multipage view, it's also especially easy to move or copy objects between pages using drag-and-drop and set the number of pages displayed.
To view multiple pages (in Multi-page mode):
Multi-page flyout on the View toolbar. An array selector appears.

Working with Pages 35

The publication appears in Multi-page mode with the specified page array in view.
To switch between views:
To switch between pages:
Last Page button on the Hintline. - or - On the Studio's Pages tab, double-click the page's thumbnail for the page (or master page) you want to view. The lower Pages window of the tab displays normal pages, while the expandable Master Pages window shows only master pages.
Previous Page, · Next Page, · First Page or

36 Working with Pages
Use the Pages tab to quickly rearrange standard pages using drag-and-drop, add/delete standard or master pages, or assign master pages to standard pages. The tab displays master pages in the upper Master Pages window (shown collapsed) and standard publication pages in the lower Pages window.
Page Manager button provides additional options, such as duplicating a particular page, assigning a specific master page to a layer, or adding/deleting multiple pages.
To add a single page:
Add to add a page (or master page) before the one selected in the window. - or - To add a new page at the end of the publication, deselect all pages by clicking in the neutral-colored region of the lower window, then click the Add button.
The

Working with Pages 37
To add master pages:
For master pages, the above procedure applies but within the Master Pages window. The only exception is that you cannot create a new master page based on a design template's pages (no dialog opens).
To delete a single page/master page:
Remove button.
To rearrange pages:
If you're only using one master page it is assigned to any newly created page by default. However, if you're using multiple master pages you can assign a specific master page to any standard page.

38 Working with Pages
To assign a master page:

From the Page tab's expanded Master Pages window, drag a master page onto a target standard page in the lower window.
If the page has more than one layer, you can specify the layer to which you want to assign the master page.
Alternatively, use the Master Page Manager (use the Set tab) in the Pages tab.
Each new page or master page consists of a single layer. One layer may be enough to accommodate the elements of a particular layout, but you can create additional layers as needed. On each layer, objects such as text frames and pictures are stacked in the order you create them, from back to front, with each new object in front of the others. Layers themselves are stacked in a similar way, and of course you can juggle the order of objects and layers as needed.
Layers are useful when you're working on a complex design where it makes sense to separate one cluster of objects from another. You can work on one layer at a time without worrying about affecting elements on a different layer.
Once you've displayed a page, you can normally edit any object on it— regardless of which layer the object is on—simply by clicking the object.

Working with Pages 39
Each layer is situated along with other layers (if present) within a stack on the Layers tab. The uppermost layer is applied over any lower layer on the page.

Layer 1 and Layer 2 above could represent the following:
In order to create new objects on a particular layer, you'll need to "activate" (switch to) that layer in the Layers tab.

40 Working with Pages
To activate a particular layer:
layer arrow jump to the now activated layer (Layer 1 in the Layers tab example above is currently active).
Don't confuse this with simply selecting a layer (Layer 2 in the example is selected, but not activated), which is used to manage the layer itself (e.g., to move it, preview it, view/change layer options, etc.).
To select a particular layer:
Right-clicking a layer name displays a menu of layer-related
actions, as well as Options for that particular layer.
When you add a new page or master page to the publication, you can specify whether to copy the layers and/or objects from a particular source page. Once you've created a page, it's easy to add, delete, move, or merge layers as needed. Moving a layer will place its objects in front or in back of those on other layers.
To add a new layer to the current page or master page:
Insert new layer button.
To delete a layer:
Delete selected layer(s) button.
buttons, you can move layers up or down in the stacking order to place their objects in front or behind those on other layers. You
Using the tab's

Working with Pages 41
can also move objects to specific layers, and merge and preview layers. (See online Help.)
Once you've displayed a page or master page, you can normally select and then edit any object on it—regardless of which layer the object is on—simply by clicking the object. Alternatively, you can limit object selection and editing to objects on a specific active layer.
To edit only objects on the active layer:
mark should show next to the active layer) and uncheck Edit all layers.
In the Layers tab, select the chosen layer (the
To select all objects on a particular layer:
Normally the active layer stays the same regardless of which object you select. For ease in identifying which layer a given object resides on, the object's selection handles will be colored according to the layer it resides on; the layer color is shown in the Layers tab (see Layer names and properties on p. 43) and is configurable.

Master pages are special "background" pages that can be shared by more than one regular page. They are assigned to each layer of a regular page rather than to the page as a whole—so if a page has multiple layers it can also employ multiple master pages! For example, one master page might include background
•

42 Working with Pages
text elements, while another included background graphics. By assigning the two master pages to separate layers you could achieve a unified design while keeping the elements separate. Page layers can each take a master page, but master page layers cannot.
You can also set any layer to use no master page. Commonly, the first layer uses a master page while subsequent layers use no master page, but there's no hard and fast rule. You can assign the master page either when you first create the layer, or subsequently, as the layout evolves.
Each layer you add to a regular page can use its own master page. If your publication uses more than one master page, you can reassign specific master pages to specific page layers at any time.
To assign a master page to a page layer:
Master Page(s) column of the chosen page layer.
Master pages, like regular pages, can have more than one layer. Layers on master pages work almost exactly like those on regular pages. The key difference is that master page layers cannot themselves take a master page; master pages can only be assigned to layers on regular pages.

Working with Pages 43
When you add a new master page to the publication, you have the option of copying the layers and/or objects from an existing master page. If you choose not to copy existing layers, the new master page starts out with one layer. You can always add more as described above.
To switch to a master page from a particular layer:
The Layers tab lets you rename layers and set a variety of properties for one or more layers.
To rename the layer:
Layer Options, then edit the Name field.
To set layer properties:
Master Page(s) column to optionally assign a master page to the layer.
Visible column to show the layer and any objects on it; uncheck to hide the layer.
Master Page(s) visible column to show the layer's master page; uncheck to hide it.
Printable column to include the layer in page printouts; uncheck to exclude it.

44 Working with Pages
Locked column to prevent objects on the layer from being selected/edited; uncheck to allow editing.
Layout guides are visual guide lines that help you position layout elements. They can include page margins, row and column guides, bleed area guides, and ruler guides.

Page margin settings are fundamental to your layout, and usually are among the first choices you'll make after starting a publication from scratch. The page margins are shown as a blue box which is actually four guide lines—for top, bottom, left, and right—indicating the underlying page margin settings. If you like, you can set the margins to match your current printer settings.

You also have the option of setting up row and column guides as an underlying layout aid. PagePlus represents rows and columns on the page area with dashed blue guide lines. Unlike the dashed gray frame margins and columns, row and column guides don't control where frame text flows. Rather, they serve as visual aids that help you match the frame layout to the desired column layout.

Bleed area guides assist you in positioning "bleed" elements that you want to run to the edge of a trimmed page. To allow for inaccuracies in the trimming process in professional printing, it's a good idea to extend these elements beyond the "trim edge"—the dimensions defined by your Page Setup. With bleed guides switched on, the page border expands by a distance you specify, and the trim edge is shown with dashed lines and little "scissors" symbols. Note that these guide lines are just a

Working with Pages 45
visual aid; only the Bleed limit setting in the Print dialog extends the actual output page size.
Ruler guides are free-floating lines that you set by clicking and dragging from the rulers. They are "sticky" so that objects can snap to them, then be moved collectively with guide movement.

To define layout guides:
on the Page context toolbar, Layout Guides... from the File menu, or right-click on a blank part of the page and choose Layout Guides. Then in the Layout Guides dialog, use the Margins tab to set guide lines for page margins, rows and columns, and bleed areas.
Remember to set up your margins so that you leave enough
room for any intended header or footer.

46 Working with Pages
To show or hide guides:
PagePlus lets you to set up horizontal and vertical ruler guides—non-printing lines you can use to align headlines, pictures, and other layout elements.

Guides are by default "sticky" so that stuck objects can be dragged around the page by their ruler guide—a great way to move previously aligned objects in bulk and simultaneously.
) as you hover over the sticky guide marker.

Working with Pages 47
Click red marker to make non-
Markers become non-sticky and change to black; object and guide are unstuck and either can then be moved.
sticky.
The PagePlus rulers mimic the paste-up artist's T-square, and serve several purposes:
To select the basic measurement unit used by the rulers:
Ruler Intersection and set the measurement unit from the flyout.

48 Working with Pages
By default, the horizontal ruler lies along the top of the PagePlus window and the vertical ruler along the left edge. The default ruler intersection is the top- left corner of the pasteboard area. The default zero point (marked as 0 on each ruler) is the top-left corner of the page area. (Even if you have set up bleed area guides and the screen shows an oversize page, the zero point stays in the same place, i.e. the top-left corner of the trimmed page.)

To define a new zero point:
To move the rulers:
To restore the original ruler position and zero point:

Working with Pages 49
To lock the rulers and prevent them from being moved:
The most obvious role for rulers is as a measuring tool. As you move the mouse pointer, small lines along each ruler display the current horizontal and vertical cursor position. When you click to select an object, shaded ruler regions indicate the object's left/right and top/bottom edges on the horizontal and vertical rulers, respectively. Each region has a zero point relative to the object's upper left corner, so you can see the object's dimensions at a glance.

The dot grid is a matrix of dots based on ruler units, covering the page and pasteboard areas. Like ruler guides, it's handy for both visual alignment and snapping.
You can also set the grid spacing, style, color, and positioning in the dialog (see PagePlus help).

50 Working with Pages
Headers and footers are layout elements that are positioned at the top and bottom of your master page(s), and are repeated on every page of your publication. The Headers and Footers Wizard lets you create these elements easily.
Remember to set up your margins so that you leave enough
room for any intended header or footer.
To create headers and/or footers:
To edit existing headers and footers:
Page number fields automatically display the current page number. Typically, these fields are added automatically to the master page (so they appear on every page) with the Header and Footers Wizard, but you can insert a page number field anywhere in your text. You can change the style of page numbers, the page on which numbering begins, and number continuation across chapters (all via Page Number Format on the Format menu).

Working with Pages 51
To define a header or footer that includes a page number field:
To insert a page number field:

52 Working with Pages


54 Working with Objects

Working with Objects 55
Before you can change any object, you need to select it using one of these tools from the Tools toolbar:
Click to use the Pointer Tool to select, move, copy, resize or rotate objects.
Click to use the Rotate Tool to rotate an object around a rotation origin (normally centered). See Rotating an object on p. 68.
To select an object:

The above example shows an unselected and selected object (showing Move and Group buttons).
If objects overlap, Alt-click until the desired object is selected.
When selecting a text object with the Pointer Tool:
Pointer Tool · Rotate Tool

56 Working with Objects

Selecting more than one object at a time (creating a multiple selection) lets you:

Working with Objects 57
To create a multiple selection:

Drag a "marquee" box around the objects you want to select.

Alternatively, hold down the Shift key and click each object in turn.
To add or remove an object from a multiple selection:
To deselect all objects in a multiple selection:
To select all objects on the page (or master page):

58 Working with Objects
Besides using the Windows Clipboard to copy and paste objects, you can duplicate objects easily using drag-and-drop, and replicate multiple copies of any object in precise formations. You can also transfer the formatting of one object to another, with the option of selecting specific attributes to be included when formatting is pasted.
To copy an object (or multiple selection) to the Windows Clipboard:
Copy on the Standard toolbar.
If you're using another Windows application, you can usually copy and paste objects via the Clipboard.
To paste an object from the Clipboard:
Paste on the Standard toolbar.
The standard Paste command inserts the object at the insertion point or (for a separate object) at the center of the page. To insert a separate object at the same page location as the copied item, use the Paste in Place command.
To choose between alternative Clipboard formats:
To duplicate an object:
Move button to a new location on the page, then release the mouse button.

Working with Objects 59
Duplicating an object means making just one copy at a time. The Replicate command lets you create multiple copies in a single step, with precise control over how the copies are arranged, either as a linear series or a grid. You can include one or more transformations to produce an interesting array of rotated and/or resized objects. It's great for repeating backgrounds, or for perfectly- aligned montages of an image or object.

To replicate an object:

60 Working with Objects
The result is a multiple selection. Click its
Group button if you want to keep the separate objects linked for additional manipulations.
Once you have copied an object to the Clipboard, you can use Paste Format (Edit menu) to apply its formatting attributes to another object. Again from the Edit menu, Paste Format Plus displays a "master control" Style Attributes Editor dialog that lets you optionally select or deselect specific attributes to be included when formatting is pasted. See Saving object styles on p. 198 for more dialog information.
The snapping feature simplifies placement and alignment by "magnetizing" moved or resized objects to grid dots and ruler guides. Objects can also snap to other guides on the page such as page margins, rows, columns, and bleeds (see p. 60), as well as the page edge, and page/margin centers (i.e., the center of the page in relation to the page edge or page margins).
In addition, dynamic guides can be used to align and resize objects to existing object edges and centers by snapping. Guides appear dynamically as you drag objects.
To turn snapping on/off globally:
Snapping on the Hintline (don't click the drop-down arrow). The button has an orange color when snapping is switched on.
Once snapping is enabled, you can selectively switch on/off snapping options (i.e., Ruler Guides, Dot Grid, etc).
To turn individual snapping controls on and off:
Snapping button (Hintline) and check/uncheck a snapping option via the drop-down menu.

Working with Objects 61
Tools>Options offers the full set of snapping options for the
user. You can also control Snapping Distance, i.e. the distance at which an object will start to snap to a dot, guide, etc.
For precise ruler guide placement, check Ruler Marks in
Tools>Options to snap guides to ruler marks.
For accurate object alignment and resizing, you can use dynamic guides instead of setting ruler guides manually or performing selection, transform, and alignment operations. These red-colored guides are shown between the vertices of the last three selected placed page objects and the manipulated object and "visually suggest" possible snapping options such as snap to the placed object's left, right, center, top, right, bottom, or to the page center. You can include objects to snap to by dragging over objects.



For alignment For resizing
To switch on dynamic guides:
Snapping button (Hintline) and click Dynamic Guides on the drop-down menu.

62 Working with Objects
To snap to page centers as well, you must additionally check
Page center in Tools>Options>Layout>Snapping.
You can easily turn a multiple selection into a group object. When objects are grouped, you can position, resize, or rotate the objects all at the same time.
To create a group from a multiple selection:

To ungroup:

Simply clicking on any member of a group selects the group object. In general, any operation you carry out on a selected group affects each member of the group. However, the objects that comprise a group are intact, and you can also select and edit an individual object within a group.
To select an individual object within a group:

Working with Objects 63
To move an object (including a multiple selection):
Move button. Once you see a move cursor you can begin dragging.

To set exact horizontal and vertical positions, use the Transform
tab.
To constrain the movement of an object to horizontal or vertical:
PagePlus provides several methods of resizing single or grouped objects. Click- and-drag is the simplest—watch the Hintline for context-sensitive tips and shortcuts!
To resize an object (in general):

64 Working with Objects

Dragging from an edge handle resizes in one dimension, by moving that edge. Dragging from a corner handle resizes in two dimensions, by moving two edges.

Use a ruler guide and center snapping to scale an object in two directions simultaneously. Center snapping involves snapping to the object edge, then dragging from a corner (or edge) handle.
Text in frames and tables doesn't change size when the
container object is resized.
To set two or more objects to the same horizontal or vertical
size as the last selected object, you can use Arrange>Size Objects....
You can also make fine resizing adjustments from the
Transform tab.
To resize freely:

Working with Objects 65
To constrain a shape, frame object, or table object when resizing:
For shapes, this has the effect of keeping a square as a square, a circle as a circle, etc.
For pictures, dimensions are constrained on dragging a corner
handle. Use Shift-drag to resize a picture freely.
Each new page or master page consists of a single layer. One layer may be enough to accommodate the elements of a particular layout, but you can create additional layers as needed. On each layer, objects such as text frames and pictures are stacked in the order you create them, from back to front, with each new object in front of the others. You can change the stacking order, which affects how objects appear on the page.
To shift the selected object's position to the bottom or top of the stack:
Bring to Front on the Arrange toolbar, respectively.
Send to Back or
To shift the object's position one step toward the back or front:
Alignment involves taking a group of selected objects and aligning them all in one operation by their top, bottom, left or right edges. You can also distribute objects, so that your objects (as a multiple selection) are spread evenly (optionally at spaced intervals).
Alignment or distribution can occur between the endmost objects on your page (current selection), page margins, or the page edge.

66 Working with Objects
To align the edges of two or more objects in a selection:
To distribute two or more objects across a selection:
Space Evenly Down to spread selected objects uniformly between endmost objects in the current selection (horizontally or vertically, respectively) or by a set measurement (choose Spaced and set a value in any measurement unit).
Space Evenly Across or
Rather than work within the current selection area you can align or distribute to page margins (if set) or page edge.
To align/distribute objects to page margins or edges:


Working with Objects 67
Exporting as a picture lets you convert all the objects on the page, or just the currently selected object(s), to an image file, using a file format you specify.
To export as a picture:
PagePlus lets you export pictures in Serif Metafile Format (.smf). This proprietary format, an improvement on the Windows Metafile Format (.wmf) due to improved text, line and fill handling, is especially useful for interworking between Serif products, i.e. you may want to utilize PagePlus objects in another Serif application to save time and effort. The object is converted to a graphic and becomes non-editable, but the object's original appearance will be honored.
Exporting Serif Metafiles

68 Working with Objects
You can rotate single and multiple objects, including pictures, text objects, and groups using the Rotate Tool.
To rotate an object:
Rotate Tool on the Tools toolbar's Selection flyout.


The Pointer Tool can also be used to rotate objects in the same way (with the
cursor).

Working with Objects 69
To undo rotation (restore the original orientation):
To change the rotation origin:
Rotate Tool and click to select the object.
away from its original position in the center of the object to any position on the page. The origin can also be moved to be outside the object—ideal for rotating grouped objects around a central point.
To rotate an object 90 degrees left or right:
Rotate Right on the Arrange toolbar.
You can flip objects horizontally (left to right; top and bottom stay the same) or vertically (top to bottom; left and right stay the same).

Rotate Left or

70 Working with Objects
To flip an object horizontally/vertically:
Cropping means masking (hiding) parts of an object, for example to improve composition or create a special effect. The underlying object remains intact. Two types of cropping are possible—square cropping or irregular cropping.


square crop irregular crop
Combining starts with more than one object, but creates a special composite object with one or more "holes" on the inside where the component objects' fills overlapped one another—useful for creating mask or stencil effects.
To crop using the object's original outline:
Square Crop Tool on the Attributes toolbar's Crop flyout.
To scale the object within the crop outline, Ctrl-drag either
upwards or downwards.

Working with Objects 71
To crop by modifying the object's outline:
Irregular Crop Tool on the Attributes toolbar's Crop flyout. The Curve context toolbar appears, which lets you control the displayed nodes and connecting segments that define the object's crop outline. See Editing lines on p. 179.
cursor, drag the node.
To move a line segment (between two nodes) where you see the cursor, drag the segment.
To position a cropped object within its crop outline:
To feather the crop outline:
To uncrop (restore full visibility):
Remove Crop button on the Attributes toolbar's Crop flyout.
The Crop to Shape command works with exactly two objects selected. Either or both of these may be a group object. The lower object (the one behind the other) gets clipped to the outline of the upper object, leaving a shape equivalent to the overlapping region.
•

72 Working with Objects

To crop one shape to another:
You can restore an object cropped in this way to its original shape, but the upper "cropping" object is permanently deleted (use Undo to recover it if necessary).
Combining curves is a way of creating a composite object from two or more lines or drawn shapes. As with cropping to a shape, the object in front clips the object(s) behind, in this case leaving one or more "holes" where the component objects overlapped. As with grouping, you can apply formatting (such as line or fill) to the combined object and continue to edit individual nodes and segments with the Pointer Tool. Unlike those other methods, a combined object permanently takes the line and fill properties of the front object. Combining is reversible, but the component objects keep the line and fill properties of the combined object.

Working with Objects 73
Combining is a quick way to create a mask or stencil cutout:




Combine Curves Drop Shadow
To combine two or more selected lines or drawn shapes:
To restore the original shapes from a combined object:
If you're working with text frames you'll probably want to add supporting shapes, pictures, tables, or even nested text frames within your publication's text (artistic or frame text). Such objects can be positioned either in relation to a position in your text (or other page element) or be simply placed inline in your text.
QuickShapes Convert to · Curves · Added

74 Working with Objects
In PagePlus, this positioning is controlled by anchoring an object using different positioning options.
anchor point. This option is ideal for pictures, pulled quotes, etc.



Working with Objects 75

PagePlus objects can be anchored to anywhere in your publication text, but the floated object can be positioned in relation to indented text, column, frame, page margin guides, the page itself, or most typically the anchor point in a text frame.
For text frames, when the text reflows, the anchor point (and therefore anchored object) reflows with the text. This allows supporting anchored objects to always stay with supporting text as more text is added to the frame.
To create an anchored object:
Either, for a floating object:

76 Working with Objects
Anchor point appears and your object is now an anchoring object (showing an anchor icon).
Or, for an inline object:

Working with Objects 77
Anchor Properties icon.
Objects inserted into text frames will automatically be anchored using "Float with text" default settings. However, the anchored object can be dragged away from the anchor point as an alternative method for creating an anchored object.
To view anchor properties:
Anchor Properties shown under the object.
The Anchored Object Properties dialog is displayed. The options differ depending on which of the three positioning options is enabled.
If you'd like to change the position of an anchor point you can drag it anywhere else in your text frame. Dragging to an area of no text will disconnect your anchored object. You can also disconnect the anchor point via Anchor Properties dialog.
To disconnect an anchored object:
The Anchor Properties button and anchor point both disappear.

78 Working with Objects
PagePlus includes some powerful tools to carve new shapes out of old overlapping shapes. With add, subtract, intersect, or exclude commands you actually produce a permanent new object (with a new outline) out of any selected objects. The joined object can be further edited by adjusting nodes in the new shape.
To join outlines (selected via marquee selection):
Join Outlines flyout on the Arrange toolbar.
Add Creates one new object that’s the sum of any two selected objects.

Working with Objects 79
Subtract Discards the overlap between the top and bottom object. The bottom object is also discarded.
Useful as a quick way of truncating shapes and pictures with another object.
Retains the overlap and discards the rest.
Merges two or more objects into a composite object, with a clear transparent “hole” where their filled regions overlap.
Intersect · Exclude

80 Working with Objects
Mesh warping lets you apply a Preset warp envelope to your PagePlus object (below) or modify a flexible grid of points and lines that you can drag to deform or distort an object and (optionally) its fill.

After applying a preset envelope from the Attributes toolbar's Warp flyout (or context toolbar), you can use the Mesh Warp context toolbar to switch the warp on/off, edit the mesh to match a particular object's geometry—for example, curves that follow the facial contours in a bitmap image—for more precise control of the warp effect. The effect is removable and doesn't permanently alter the object.
The process of editing mesh warps and their envelopes is described in greater detail in the PagePlus Help.

Working with Objects 81
A border is a repeating, decorative element that can be set to enclose objects, such as text frames, pictures, and tables.
PagePlus comes with an impressive range of categorized picture-based border styles for you to use. However, if you'd like to create your own custom borders you can import a border design as a picture, and save it for future use.
Edge selection lets you apply the border effect to all sides, top, bottom, left, right, or both top and bottom (opposite).
The Picture Frames category in the Gallery tab offers the same
set of border styles but already applied to placeholder picture frames. (See p. 153.)
To add a border to an object:
Line/Border on the Tools toolbar's Fill flyout.

82 Working with Objects
To remove a border, select None from the top of the list.

You can switch edges on and off to make multiple combinations.

Working with Objects 83
button to base your borders on your own bordered picture design.
Once you've optimized the design of your new border, you might like to save it for future use. The border is stored globally so you can make use of it in other publications.
To save your custom border:
Use the

84 Working with Objects
Logos are intended to send a clear message to your target audience, all within a simple and identifiable design. Whether you intend to communicate a stylish, business, fun or modern message (opposite), PagePlus allows you to create impressive logos of varying design.
Logos are great for adding to master pages associated with your publication.
To add a logo:
Insert Logo from the Tools toolbar's Logo flyout.

Working with Objects 85
PagePlus's Gallery tab also hosts the same selection of logos.
If you're looking to further modify your logo you can use LogoStudio, an integrated design environment. This allows you to focus on your design without the distractions of other objects on the page, i.e. the design is displayed in isolation and centered on the page. Alternatively, a logo or flash can be created from existing artistic text, shape, gallery object, picture, or grouped objects.
To edit an existing logo:
button on the control bar under the selected logo. LogoStudio is launched with your object(s) zoomed in to fit your workspace.
from LogoStudio's main toolbar to exit. The modified logo is updated in its original position.
It's just as easy to by-pass the pre-defined logos and base your custom logo on objects already present in your publication. The logo can be converted back to separate objects at any time by ungrouping.
To convert existing objects to a logo:

86 Working with Objects

In PagePlus, flashes can be created, with each design intended to catch the eye, especially for commercial reasons or general attention grabbing.
PagePlus's Gallery tab comes complete with a host of flashes; subcategories based on Retail, Celebrations, Fun stuff (Shapes or Text), and Pointers are available.
When dragging a flash design onto the page, three varieties of flash may be encountered—those without text, with text, and those with optional layouts.
To add a flash:

button next to the subcategory name (click
to expand). Select a suitable flash thumbnail from the pane.

Working with Objects 87




88 Working with Objects
Design variations and supporting text may not be available for
some designs.
If you're looking to further customize your flash design (or use existing page objects) you can use LogoStudio. See Adding logos on p. 84.


90 Working with Text

Working with Text 91
Importing text from a word-processor file is the traditional way to create text content for Desktop Publishing layouts (but you can also create a story using WritePlus). If you use your current word processor to create the text file for your publication, you can import any number of files into one publication. Each file becomes a story consisting of a self-contained section of text like a single article in a newspaper, which resides in one or more linked text frames.
As well as the WritePlus format (.stt), a range of popular word processing and text formats can be imported, including:
ANSI text .txt
Microsoft Word 2007 .docx/.dotx
Microsoft Word 2000/2003 .doc/.dot
MS Works .wps
Open Office text .odt
Rich Text Format .rtf
Wordperfect .wpd
Write .wri
For Microsoft Word formats created in any Windows operating system you don't need to have Microsoft Word installed locally. This means you can reuse third- party text content in PagePlus without the supporting application.
PagePlus will preserve the formatting of imported word-
processor text. However, if you're using your word processor to create text specifically for PagePlus, you'll save time by typing as text only, and applying formatting later in PagePlus.
To import text from a file:

92 Working with Text
Typically, text in PagePlus goes into text frames, which work equally well as containers for single words, standalone paragraphs, or multipage articles or chapter text. You can also use artistic text (see p. 103) for standalone text with special effects, or table text (see Creating text-based tables on p. 136) for row- and-column displays.
A text frame is effectively a mini-page, with:
The text in a frame is called a story.

Working with Text 93
Frames can be linked so that a single story continues from one frame to another. But text frames can just as easily stand alone. Thus in any publication, you can create text in a single frame, spread a story over several frames, and/or include many independent frame sequences. By placing text frames anywhere, in any order, you can build up newspaper or newsletter style publications with a story flowing from one column to another (below) or even across pages.

When you select a frame you'll see its bounding box, indicated by a gray border line plus corner and edge handles, and (if you clicked with the Pointer Tool) a blinking insertion point in the frame's text. In this mode, you can edit the text with the Pointer Tool. (For details, see Editing text on the page on p. 108.)
Text frames behave like other PagePlus objects—when selected, you can manipulate them as for shapes, lines, artistic text, and tables. Here's a breakdown of text frame capabilities.

94 Working with Text
Margins and column guides
Breaks (column, page, and frame)
Solid fill and line color
Gradient and bitmap fill

Working with Text 95
You add frames to a page as you would any other object. PagePlus supports a wide variety of frame shapes which can be resized and morphed into new shapes once placed on the page (just like QuickShapes; see p. 182).
To create a frame:
Text Frame flyout on the Tools toolbar.
To create a frame (from a shape):
To delete a frame:
You can select, move, and resize text frames just like other objects. (See p. 55, 63, and 63, respectively.)
You can put text into a frame using one of the following methods:
WritePlus on the Frame context toolbar.

96 Working with Text
Importing text: Right-click on a frame and choose Insert Text File... (shortcut Ctrl+T) to import text.
Typing into the frame:
Select the Pointer Tool, then click for an insertion point to type text straight into a frame, or edit existing text. (See Editing text on the page on p. 108.)
Pasting via the Clipboard:
At an insertion point in the text, press Ctrl+V.
Drag and drop: Select text (e.g. in a word processor file), then drag it onto the PagePlus page. If you drop onto a selected frame, the text is pasted inline where the insertion point had been placed previously. Otherwise, a new frame is created for the text.
The frame layout controls how text will flow in the frame. The frame can contain multiple columns. When a frame is selected, its column margins appear as dashed gray guide lines if set in Frame Setup. Note that unlike the page margin and row/column guides, which serve as layout guides for placing page elements, the frame column guides actually determine how text flows within each frame. Text won't flow outside the column margins.
You can drag the column guides or use a dialog to adjust the top and bottom column blinds and the left and right column margins.

Working with Text 97

To edit frame properties directly:



The illustration above shows how the cursor will change when hovering over the selected bounding box (1), after dragging inwards the column margin can be adjusted (2), and after dragging downwards, the top margin blind can be moved (3).
(1) (2) (3)

98 Working with Text
To edit frame properties using a dialog:
Frame Setup on the Frame context toolbar.
You can have just one frame on its own, or you can have many frames. Frames can be connected in linked sequences so that the story associated with a given frame sequence flows through the first frame on to the next and keeps flowing into frames in the link sequence.
A key difference from a word processor is that PagePlus does not normally add or remove frames according to the amount of text. The text simply flows until the text runs out (and some frames are left empty), or the frames run out (and some text is left over), i.e.
PagePlus keeps track of multiple linked frame sequences, and lets you flow several stories in the same publication. The Text Manager (accessed via the Tools menu) provides an overview of all stories and lets you choose which one you want to edit.
On text overflow, the frame's
AutoFlow button can be used to create new frames for the overflowed text. To control how the frame text is spread throughout available frames, you can use Fit Text, Enlarge Text, or Shrink Text. These options scale a story's text size. See Fitting text to the frames on p. 99.

Working with Text 99
Fitting story text precisely into a sequence of frames is part of the art of laying out publications.
If there's too much story text to fit in a frame sequence, PagePlus stores it in an invisible overflow area and the Link button on the last frame of the sequence displays
AutoFlow button appears next to the Link button. You might edit the story down or make more room for it by adding an extra frame or two to the sequence. Clicking the AutoFlow button adds additional frames and pages as needed (see below).
Once frames are in position it's still possible to control how text is distributed throughout the frame(s) via tools on the Frame context toolbar.
The Text Sizing flyout offers three tools for controlling how
frame text scales through the text frame. These are "once-off" operations (compared to the "continuous" Autofit options shown below).
Fit Text Click to scale the story's text size so it fits exactly into the available frame(s); further text added to the frame will cause text overflow. You can use this early on, to gauge how the story fits, or near the end, to apply the finishing touch. Fit Text first applies small point size changes, then small leading changes, then adjustments to the paragraph space below value, until the text fits.
Enlarge Text Click to increase the story's text size one increment (approx. 2%).
Shrink Text Click to reduce the story's text size one increment.
Each frame's story text can adopt its own individual autofit setting as follows:
The AutoFit Options flyout offers three autofit options which
continuously act upon a selected frame's story text.
; an

100 Working with Text
No Autofit This is the normal mode of operation where, if selected, text won't automatically scale throughout the selected text frame, possibly leaving partly empty frames at the end of the frame sequence.
Shrink Text on Overflow If selected, extra text added to a selected frame will shrink all frame text to avoid text overflow.
Autofit If selected, the frame will always scale text automatically by adjusting text size (compare to Fit Text which fits text once, with any additional text causing text overflow).
When importing text, it's a good idea to take advantage of the AutoFlow feature, which will automatically create text frames and pages until all the text has been imported. This way, enough frames are created to display the whole story. Then you can gauge just how much adjustment will be needed to fit the story to the available "real estate" in your publication.
If you add more text to a story while editing, or have reduced the size of frame, you may find that an overflow condition crops up. In this case you can decide whether to use AutoFit or click the frame's AutoFlow button.
To AutoFlow story text on the page:
AutoFlow button just to the left of the frame's
Link button.
If no other empty frames are detected, you'll be prompted to autoflow text into a new frame(s) the same size as the original or to new frame(s) sized to the page. If an empty frame exists anywhere in your publication, PagePlus will flow text into that instead, before commencing with autoflow.

Working with Text 101
When a text frame is selected, the frame includes a Link button at the bottom right which denotes the state of the frame and its story text, and which allows you to control how the frame's story flows to following frames:
The frame is not linked to a following frame (it's either a standalone frame or the last frame in a sequence) and the frame is empty or the end of the story text is visible.
The populated frame is not linked (either standalone or last frame) and there is additional story text in the hidden overflow area. An
Autoflow button also appears to the left of the Link button.
The frame is linked to a following frame. The end of the story text may be visible, or it may flow into the following frame. Note: The button icon will be red if the final frame of the sequence is overflowing, or green if there's no overflow.
There are two basic ways to set up a linked sequence of frames:
When frames are created by the AutoFlow option (for example
when importing text), they are automatically linked in sequence.
To create a link or reorder the links between existing frames, you can use the Link button under the frame (or the controls on the Frame context toolbar). Remember to watch the cursor, which changes to indicate these operations.
No Overflow · Overflow · Continued

102 Working with Text
To link the selected frame to an existing frame:
).
To link the selected frame to a newly drawn frame:
To unlink the selected frame from the sequence:
, then click with the Textflow cursor on the same frame.
Story text remains with the "old" frames. For example, if you detach the second frame of a three-frame sequence, the story text remains in the first and third frames, which are now linked into a two-frame story. The detached frame is always empty.
To navigate from frame to frame:
Next Frame button on the Frame context toolbar.
or · Previous Frame or

Working with Text 103
Artistic text is standalone text you type directly onto a page. Especially useful for headlines, pull quotes, and other special-purpose text, it's easily formatted with the standard text tools.
Here are some similarities between frame text and artistic text. Both text types let you:
And some differences...

104 Working with Text
To create artistic text:
Artistic Text flyout on the Tools toolbar.
Artistic Text Tool from the
Once you've created an artistic text object, you can select, move, resize, delete, and copy it just as you would with a text frame. Solid colors, gradient/bitmap fills, and transparency can all be applied.
To resize or reproportion an artistic text object:

Working with Text 105
To edit artistic text:
You can also double-click to select a word. Now you can type new text, apply character and paragraph formatting, edit the text in WritePlus, apply proofing options, and so on.
"Ordinary" straight-line artistic text is far from ordinary—but you can extend its creative possibilities even further by flowing it along a curved path.
The resulting object has all the properties of artistic text, plus its path is a Bézier curve that you can edit with the Pointer Tool as easily as any other line! In addition, text on a path is editable in some unique ways, as described below.

106 Working with Text
To apply a preset curved path to text:
Path Text flyout and choose a preset path.
The text now flows along the specified path, e.g. for "Path - Top Circle".
To add artistic text along an existing line or shape:
Artistic Text Tool from the Artistic Text flyout on the Tools toolbar.

Working with Text 107
To fit existing text to an existing line or shape:
To create text and path at the same time:
The Freehand Path Text Tool lets you sketch a curved line in a freeform way.
The Straight Path Text Tool is for drawing a straight line.
The Curved Path Text Tool lets you join a series of line segments (which may be curved or straight) using "connect the dots" mouse clicks.
To remove the text path:
Path - None button on the Text context toolbar's Path flyout.
The text remains as a straight-line artistic text object and the path is permanently removed.

108 Working with Text
You can use the Pointer Tool to edit frame text, table text, or artistic text directly. On the page, you can select and enter text, set paragraph indents and tab stops, change text properties, apply text styles, and use Find and Replace. For editing longer stories, and for more advanced options, choose WritePlus (Edit Story… from the Edit menu).
The selection of frame text, artistic text, and table text follows the conventions of the most up-to-date word-processing tools. The selection area is shaded in semi-transparent blue for clear editing.

Double-, triple- or quadruple-click selects a word, paragraph or all text, respectively. You can also make use of the Ctrl-click or drag for selection of non-adjacent words, the Shift key for ranges of text.
To edit text on the page:


Working with Text 109
To start a new paragraph:
To start a new line within the same paragraph (using a "line break" or "soft return"):
The following two options apply only to frame text. You can use these shortcuts or choose the items from the Insert>Break submenu.
To flow text to the next column (Column Break), frame (Frame Break) or page (Page Break):
To switch between insert mode and overwrite mode:
To show special characters:
drop-down arrow on the View toolbar, either for Show Special Characters (paragraph marks and breaks; see below) or Show Spaces (Show Special Characters plus tabs, non-breaking spaces, hyphenation points, and "filled" normal spaces).



110 Working with Text
You can easily copy and paste text using standard commands; drag and drop of text is also supported.
If you don't place an insertion point on pasting, the text can be
pasted into a new text frame directly.
When a text object is selected, markers on the horizontal ruler indicate the left indent, first line indent, and right indent of the current paragraph. You can adjust the markers to set paragraph indents, or use a dialog.
For details on setting frame margins, see Frame setup and layout (on p. 96).

Working with Text 111
To set the indents of the current paragraph:
Decrease Level button to increase or decrease indent, respectively. Indent is by the currently set default tab stop distance. - or -
To set a tab stop:
Left Center Right Decimal
If you want to set precise measurements for tabs, right-click
the frame and choose Text Format, then select Tabs... from the submenu.
Increase Level or

112 Working with Text
PagePlus fully supports Unicode, making it possible to incorporate foreign characters or special symbols.
You can search publication text for an extraordinary variety of items: not just words or parts of words, but a host of character and paragraph attributes such as fonts, styles, alignment, bullets and numbering, missing fonts, drop caps... even inline graphics and more! Once located, you can replace items either globally, or on a case-by-case basis.
To use Find and Replace on frame text:

Working with Text 113
expressions to treat the contents of the Find box as an expression, rather than as a literal string to be found.
PagePlus gives you a high degree of typographic control over characters and paragraphs, whether you're working with frame text, table text, or artistic text.
To apply basic text formatting:
To clear local formatting (restore plain/default text properties):

114 Working with Text
One of the most dramatic ways to change your document's appearance is to change the fonts used in your artistic text, frame text, or table text. Applying different fonts to a character or entire paragraph can communicate very different messages to your intended readership.
Font assignment is very simple in PagePlus, and can be done from the Fonts tab, Text context toolbar, or in the Character dialog (via right-click, or from the Format menu).

The Fonts tab lets you:

Working with Text 115
The Fonts tab is automatically hidden by default, but can be viewed by clicking the arrow button at the left of your workspace. You may also need to click the Fonts label to display the Fonts tab.
The fonts shown in the Fonts tab represent the currently installed fonts on your computer. This means that these fonts are available to format any selected character or paragraph.
To assign a font:
You can preview how fonts will appear on your selected text by enabling PagePlus's font preview feature.
To preview fonts:
Tab Menu button (top-right of tab), check the Preview Font option.

116 Working with Text
Changing one font for another is very simple for a single portion of text, but the Fonts tab can take things a step further by allowing a font to be located throughout the entire document (see above), and if necessary, swapped for another font. It's simple to then re-assign a different font to the selected text.
To select (and change) a font throughout your document:

Working with Text 117
Font substitution issues may arise when opening PagePlus Publications. This is because the fonts used in the original document may not be present on the target computer. If this occurs, font substitution of that unavailable font can be initiated via a pop-up dialog.
PagePlus's font substitution mechanism makes use of the PANOSE Font Matching System which intelligently finds the best font substitution match between a missing and a locally available font. By default, clicking OK will substitute the missing font for a locally available standard font (e.g., Arial) automatically. Optionally, you can manually substitute the missing font with the font of your choosing by enabling the Edit font substitutions manually button instead.
A third option, is to use Serif's FontManager program which can search and load uninstalled fonts if located (fonts are uninstalled after use). See Using FontManager on p. 119.
To avoid font substitution, try to source original fonts from the
originating PC if possible.

118 Working with Text
To manually substitute a font on loading a publication:
with status "Missing". Click
4. Click Add<< to place the font in the Substitute with box. This box can contain more than one font—your first choice and a secondary font (e.g., Arial or Times New Roman). A secondary font (perhaps a more widely available font) is particularly useful if you want to provide an alternative to your first choice substituted font. You should always place your first choice at the top of the list with the Move up or Move down buttons. The dialog shows both fonts for substitutions, e.g.
The Adamsky SF font is first choice, with Arial used as a secondary font.

Working with Text 119
Reset the Substitute with box by clicking the Default button.
This will replace the fonts listed with a single font, e.g. Arial or Times New Roman, as governed by Windows (this is not configurable).
To manually substitute a font any time:
button.
FontManager is a standalone Serif application that works alongside PagePlus with respect to font substitution. Its main feature is to locate and dynamically install a publication's missing fonts. The following procedure assumes FontManager is installed.
The Font Substitution dialog will indicate fonts found by
FontManager with the status "Located."
To install fonts dynamically with FontManager:
When the current session is closed, the dynamically installed fonts will uninstall automatically.

120 Working with Text
PagePlus lets you use named text styles (pre- or user-defined), which can be applied to frame text, table text, artistic text, index text or table of contents text. A text style is a set of character and/or paragraph attributes saved as a group. When you apply a style to text, you apply the whole group of attributes in just one step. For example, you could use named paragraph styles for particular layout elements, such as "Heading 1" or "Body," and character styles to convey meaning, such as "Emphasis," "Strong," or "Subtle Reference."

Styles can be applied to characters or paragraphs using either the Text context toolbar or the Text Styles tab. Both paragraph and character styles can be managed from the Text Style Palette.
A paragraph style is a complete specification for the appearance of a paragraph, including all font and paragraph format attributes. Every paragraph in PagePlus has a paragraph style associated with it.

Working with Text 121
word marked as bold would remain bold when the paragraph style was updated or changed.
A character style includes only font attributes (name, point size, bold, italic, etc.), and you apply it at the character level—that is, to a range of selected characters—rather than to the whole paragraph.
The named style of the currently selected text is displayed in either the Text Styles tab or the drop-down Styles box on the Text context toolbar. A character style (if one is applied locally) may be shown; otherwise it indicates the paragraph style.
To apply a named style:
The Text Style tab highlights the paragraph or character style applied to any selected text.

122 Working with Text
As both paragraph and character formatting can be applied to the same text, all of the current text's formatting is displayed in the Current format box on the tab. In the example below, currently selected text has a Strong character style applied over a Normal paragraph style.

To update a named style using the properties of existing text:
All text using the named style, throughout the publication, takes on the new properties.
To create a new style:
button.
- or -

Working with Text 123
To create a new style using the properties of existing text:
The new style is defined with the properties of the selected text.
To modify an existing style:
button from the Text Styles tab, then choose the Modify... button.
Alternatively, choose Text Style Palette... from the Format menu to modify styles and to change text defaults (see p. 24).
To delete one or more text styles:

124 Working with Text
Take care when deleting styles. Styles based on a checked
"parent" style will be checked for deletion.
To return characters and/or paragraphs back to their original formatting, click on the Clear Formatting option in the Text Styles tab. This is great for reverting some formatting which hasn't quite worked out! You can clear the formatting of selected characters, paragraphs, or both depending on what text is currently selected. The following table indicates the effects of different types of text selection on clear formatting.
Selection Clicking Clear Formatting affects..
Range of text Character
Single paragraph Character and Paragraph
Story text Character and Paragraph
Text frame Character and Paragraph
You also have the flexibility to be more explicit about how clear formatting is applied by clicking on the Clear Formatting option's drop-down arrow, i.e.

Word Character · Multiple paragraphs Paragraph

Working with Text 125
To remove local formatting:
Like Clear Formatting, you can use Reapply Styles on the Text Styles tab (or Text context toolbar) to clear all local overrides leaving the default text. However, where Clear Formatting reverts the text to Normal style, Reapply styles reverts the text back to its current name style. Use Apply to Character (retaining paragraph styles overrides), Apply to Paragraph (retaining character style overrides), and Apply to Both to remove both character or paragraph style overrides simultaneously.
If you prefer, you can remove a style's formatting, enabling you to start building up your text style again. Choose Manage Styles button on the Text Styles tab, click the Modify button, then click the Clear All button from the General section.
Changing one character or paragraph style for another is very simple for a single portion of text. However, in PagePlus, it's just as easy to swap one style for another by selecting multiple instances of the style and choosing an alternative style. This swaps styles across paragraphs and throughout entire stories all at the same time.

126 Working with Text

To select (and change) a style throughout your document:
PagePlus lets you wrap frame text around the contours of a separate object. Usually, this means wrapping text to a picture that overlaps or sits above a text frame. But you can wrap frame text around a picture, shape, artistic text, table, or another frame. Wrapping is accomplished by changing the wrap setting for the object to which text will wrap.
To wrap text around an object:
Wrap Settings button on the Arrange toolbar.

Working with Text 127


The examples show tight wrapping applies to the right of the object only.
In addition, you can specify the Distance from text: the "standoff" between the object's wrap outline and adjacent text. (The wrap outline is a contour that defines the object's edges for text wrapping purposes.) Different object types have different initial wrap outlines. For QuickShapes, the wrap outline corresponds exactly to the object's edges, while for closed shapes the outline is a rectangle.
You can manually adjust the wrap outline using the Curve context toolbar for more precise text fitting. See PagePlus help for more information.
You can turn a series of paragraphs into bulleted, numbered or multi-level lists. Bullets are especially useful when listing items of interest in no specific order of preference, numbered lists for presenting step-by-step procedures (by number or letter), and multi-level lists for more intelligent hierarchical lists with prefixed numbers, symbols, or a mix of both, all with supporting optional text (see Using multi-level lists on p. 129).

128 Working with Text



Bulleted list Numbered list Multi-level list
PagePlus lets you create simple lists directly from the Text context toolbar or choose from a preset bullet, number or multi-level lists via dialog. If you want to go a step further you can create custom list styles by selecting your own symbols, numbers and letter formats. You then have the option of replacing an existing preset with your own preset based on your own custom list style.
Lists can be applied to normal text (as local formatting) or to text styles equally.
To create a simple bulleted or numbered list:
Numbered List from the Text context toolbar.
The list style used is the first preset shown in the Bullets & Numbering dialog described below.
To create a bulleted or numbered list (using presets):
Bulleted List or

Working with Text 129
For number and multi-level lists, check Restart numbering to
restart numbering from the current cursor position in the list; otherwise, leave the option unchecked.
Turn off list formatting by clicking the Text context toolbar's
buttons again.
For multi-level lists, as opposed to bulleted and numbered lists, you can set a different character (symbol, text or number) to display at each level of your list. Levels are normally considered to be subordinate to each other, where Level 1 (first level), Level 2 (second), Level 3 (third), etc. are of decreasing importance in the list. For example, the following simple multi-level numbered passage of text is arranged at three levels.
or

130 Working with Text

The flexibility of PagePlus's multi-level bullet and numbering system means that you have full control over what gets displayed at each level. For this reason, no common numbering schema needs to exist between levels, i.e. the list could equally be prefixed with a different symbol, text prefix, or number combination at each level.
If you apply a multi-level preset to a range of text you'll get a list with the preset's Level 1 format applied by default. Unless you use text styles, you'll have to change to levels 2, 3, 4, etc. to set the correct level for your list entry.
Changing list levels on selected paragraphs:
Decrease Level button on the Text context toolbar to increment or decrement the current level by one.
The multi-level presets offer some simple but commonly used schemas for paragraph list formatting. However, if you want to create your own lists or modify an existing list (your own or a preset), use the Details button in the Text
Increase Level or

Working with Text 131
Style dialog when Multi-Level style is selected. See online Help for more details.
The lists discussed so far are usually applied as local formatting to a single style, typically "Normal" or "Body". To prove this, you'll see the list structure disappear if you apply Clear Formatting (from the Text Styles tab or Text context toolbar's Styles drop-down menu) on the selected list.
If you're working on long documents, you may be using pre-assigned text styles (Heading 1, Heading 2, indent, etc.) to format your document rather than using the above local formatting. You can use such text styles along with list styles to number headings or paragraphs automatically without the need to repetitively format headings or paragraphs as lists. As an example, headings and paragraphs in technical and legal documents are typically prefixed by numbers for easy reference. The advantage of using a style-driven approach is that you can let the numbering take care of itself while you concentrate on applying styling to your document.
If you plan to create your own multi-level paragraph styles, make use of the Style for Increase Level option when creating text styles. This sets the paragraph style that will be automatically applied to text if Increase Level is applied from the context toolbar; another advantage is that if you apply a multi- level style to text, the associated next level's style will be made available in the Text Styles tab.
PagePlus lets you easily associate any bulleted, numbered or multi-level list style (either preset or custom list) to an existing text style. See Using text styles on p. 120.
PagePlus includes two powerful support tools to nip possible spelling errors in the bud. The AutoCorrect feature overcomes common typing errors and lets you build a custom list of letter combinations and substitutions to be applied automatically as you type. You can also turn on the Spell as you Type feature to mark possible problem words in your story text in red. Both features apply to frame text, table text, and artistic text.
If you prefer to address spelling issues in larger doses at the same time, you can run the Spell Checker anytime.

132 Working with Text
To set options for automatic text correction:
Check Replace text while typing to turn on AutoCorrect.
To create a correction list:
To turn off AutoCorrect:
Use the Check spelling as you type feature to firstly indicate possible problem words in your text in red, and secondly to offer a range of alternative correct spellings to replace the problem words.

Working with Text 133
To check spelling as you type:
The Spell Checker lets you check the spelling of a single word, selected text, a single story, or all stories in your publication. You can customize the built-in dictionary by adding your own words.
To help trap typographic errors and fix spelling problems while creating text, use AutoCorrect and Check spelling as you type, respectively.
Multilingual spell checking is supported by use of up to 14 dictionaries. Any language can be enabled globally from Tools>Options>Options>General or applied specifically to text or paragraphs via the Language Selector in the Character tab. Spell checking can be turned off temporarily by selecting "None" as a language type—this could be useful when working with text containing lots of unusual terms (perhaps scientific or proprietary terminology).
To check spelling:

134 Working with Text
When a problem is found, PagePlus highlights the problem word. The dialog offers alternative suggestions, and you can choose to Change or Ignore this instance (or all instances) of the problem word, with the option of adding the problem word to your dictionary.
The Proof Reader checks for grammar and readability errors in text in your publication. You can use Proof Reader from either PagePlus or WritePlus.
To start automatic proofreading:

Working with Text 135
The Thesaurus lets you find synonyms, definitions, and variations of words in your publication text. You can use the Thesaurus from either PagePlus or WritePlus.
To display the Thesaurus:
If the selected word or word entered is found in the Thesaurus database:
To pop a new word into the "Replace/Look Up" box:
You can navigate indefinitely through the thesaurus by selecting the specific meaning, followed by the specific synonym you are interested in and then clicking on the Look Up button to get a new range of meanings and synonyms for the new word.
To replace the original word:

136 Working with Text
To exit the thesaurus:
Tables are ideal for presenting text and data in a variety of easily customizable row-and-column formats, with built-in spreadsheet capabilities.
Each cell in a table behaves like a mini-frame. Like frame text you can vary character and paragraph properties, apply named text styles, apply photo-based borders, embed inline images, apply text color fills (solid, gradient, or bitmap), track font usage with the Resource Manager, and use proofing options such as Spell Checker, Proof Reader, and Thesaurus. Some unique features include number formatting and formula insertion.
Rotate table text (in cell)
Solid fill and border color
Gradient and bitmap fill

Working with Text 137
Edit cell text in WritePlus
View cell text in Text Manager
Pasting of Excel cell contents
Table text doesn't flow or link the way frame text does; the
Frame context toolbar's text-fitting functions aren't applicable.
Rather than starting from scratch, PagePlus is supplied with a selection of pre- defined table formats, i.e. templates, that can be used. Simply pick one and fill in the cells with content.
PagePlus lets you:

138 Working with Text
To create a table:
Table Tool from the Table flyout.
if you want to further customize your chosen format. See Creating custom table formats.
Plan your table layout in advance, considering the number of
You can select, move, resize, delete, and copy a table and its contents, just as you would with a text frame. Cell properties can also be modified.
To manipulate a table object:
Move button.
Move button with the Ctrl key pressed down.
rows/columns needed!

Working with Text 139
To select and edit text in cells, rows, and columns:
button, and choose the option from the flyout menu. The copy and paste of Microsoft Excel spreadsheet cell contents into any PagePlus table is also possible.
To move cell contents within the same table, select the cell(s), and hover over the cell border(s) until the move cursor is shown— click and drag the cell to its new cell location.
•

140 Working with Text
Table text can be sorted by row, column, multi-row, multi- column regions or entire table using the Sort button from the context toolbar. See Sorting tables.
To format numbers and insert formulas, switch on the Spreadsheet functions button on the Table context toolbar. For more details, see online Help.
To change the table's structure and appearance:


cursor shown when hovering over the separating lines in the table row or column headings. Note that you can adjust a row's height independent of the amount of text it contains. For absolute row/column sizing, choose Set Column Width(s) or Set Row Height(s) from the Table menu. For individual columns, click the column or row header's
button, choosing Set Width or Set Height. You can resize your columns
• · •

Working with Text 141
without affecting the overall table width by adjusting the column heading with Ctrl-drag.
button and choose Evenly Distribute Rows. Conversely, use the equivalent button (and Evenly Distribute Columns command) at a row header to distribute columns on the chosen row.
button, choosing Autofit Row to Contents or Autofit Column to Contents, respectively.
button and choose Delete.


Alternatively, select one or more cells, then choose Insert from the Table menu (Table>Insert from the right-click menu), then either Rows... or Columns... from the submenu. In the dialog, specify how many to add, and whether to add them before or after the selected cells.

142 Working with Text
button, choosing Merge Cells. Do the equivalent with the Separate Cells command to split cells.
To copy cell contents (including text, formatting, borders, and colors) to a new cell in the same table, select the cell(s), press the Ctrl key and hover over the cell border(s) until the copy cursor is shown— click and drag the copied cell to its new cell location.
To apply a colored background to a whole table, hover over the top-left hand corner of the table until you see a cursor—click once, and then use the Color tab or Swatches tab to apply a color fill. (See Applying solid fills on p. 207).
To use style presets to customize the table's appearance:
• · •

Working with Text 143
You can modify a table format at any time, saving it for future use. See Creating custom table formats for more information.
To customize the appearance of one or more cells "by hand":
Cell Properties button on the Table context toolbar. - or - For a whole column or row only, click the column or row header's
button, choosing Cell Properties....
The Calendar Wizard helps you design month-at-a-glance calendars for use in your publication.
The calendar is created as a scalable text-based table so you can edit text using the standard text tools. The properties of a selected calendar are similar to those of a table, and can be modified identically (see Manipulating tables on p. 138). Like custom table formats you can create your own custom calendar formats.
The wizard lets you set up the month/year and calendar style/format, and controls the inclusion of personal events and/or public holidays. The Calendar

144 Working with Text
Event Manager lets you add personal events before or after adding a calendar to the page.
If you have adopted a calendar-based design template, you'll be initially prompted to configure global calendar details via a User Details dialog. This updates all calendar details throughout your PagePlus document—in the same way that you'd set up the date (along with the time) on some alarm clocks.
For calendar-specific properties, a context toolbar lets you change an existing calendar's month/year, modify calendar-specific properties, and manage calendar events (both personal and public holidays).
At any time, you can update calendar details throughout your publication via Set User Details—in the same way that you'd set up the date (along with the time) on some alarm clocks. This is especially useful if you want to update the year on a year-to-view page, composed of 12 monthly calendars—you only need to change the year in one place.
To insert a calendar:
Insert Calendar.
If you plan to use your calendar in subsequent years, simply update the Year setting in Tools>Set User Details (use the dialog's Calendars tab if not shown).

Working with Text 145
To view and edit a selected calendar's properties:
on the Calendar context toolbar.
Right-click (with the Calendar option selected) also lets you select, insert, distribute, delete, and adjust widths/heights for rows (or columns), as well as autofit to cell contents, but take care not to corrupt your table formatting!
When you create a calendar you can set up the appropriate public holidays for the country you reside in. The holidays will show up in your calendar automatically if Add public holidays is checked in Calendar Properties.
To enable public holidays:
on the context toolbar.
To display public holidays:
on the context toolbar.

146 Working with Text
You can complement your public holiday listings (e.g., Easter holidays) by adding personal events such as birthdays, anniversaries, and bill payments (unfortunately!) so that the events show up on your calendar—simply use the Calendar Events button on a selected calendar's context toolbar. Events show automatically on your calendar under the chosen date.
To add an event:
on the context toolbar.
New event.
Browse button to select a date.
Delete event buttons to modify or delete an existing event.
Use the · Edit event or

Working with Text 147
Hyperlinking an object such as a box, Quick Button, a word, or a picture means that a reader of your PDF document can trigger an event by clicking on the object. The event might be a jump to a different page, the appearance of an email composition window, the display of a graphic, text, or media file, or a jump to an anchor attached to a target object.
To hyperlink an object:
Hyperlink on the Standard toolbar.
As a visual cue, hyperlinked words are underlined and appear in the color you've specified in the Scheme Manager.
To modify or remove a hyperlink:
Hyperlink on the Standard toolbar. The Hyperlinks dialog opens with the current link target shown.
Removing a hyperlink does not remove the underlying object or
text.

148 Working with Text
For a "birds-eye" view of all the hyperlinks in your publication, use the Hyperlink Manager (Tools menu).
The Table of Contents Wizard (Insert>Table of Contents...) helps you create a table of contents with up to six levels of headings and sub-headings derived from named styles in your publication.
If you're exporting to PDF format, PagePlus can automatically build a bookmark list using the same style markings in your text.
To create a table of contents:
You can optionally hyperlink each page number to its actual page location. (See Hyperlinking an object on p. 147.)
The Wizard will show you a list of all the style names used in your publication, and you will check boxes to include text of a given style as a heading at a particular level (1 through 6). For example, you could pull out all text using the "Heading" style as your first-level headings.
Entries in the resulting table of contents will appear in the order the text occurs in your publication.

Working with Text 149
When the table of contents is created, PagePlus formats it using built-in Text styles (p. 120) intended specifically for table of contents preparation: "Contents-Title" and "Contents-1st" through "Contents-6th". You can easily change the look of your table of contents by changing the style definitions for these built-in "Contents" styles.
An index is a valuable reader aid in a longer document such as a report or manual. The Index Wizard helps you create an index with main entries and subentries, based on index entry marks you insert in frame, table, or artistic text.
To mark index entries:
Mark Index button on the Story toolbar.
Index entry marks are invisible on the PagePlus screen and can
only be added or edited in WritePlus.

150 Working with Text
To build an index:


152 Pictures, Lines, and Shapes

Pictures, Lines, and Shapes 153
Not to be confused with a decorative border, a picture frame is a shaped container similar to a text frame. You can select either:
Either option lets you import a picture directly into the frame or drag a picture into it from the Media bar. Empty picture frames are shown as envelope-shaped placeholders. At any time you can replace the picture in the frame.
All selected picture frames that contain a picture will display a supporting Picture frame toolbar under the frame. This offers panning, rotation (90 degrees counter-clockwise), zoom in, zoom out, and replace picture controls).
To add a bordered picture frame:

154 Pictures, Lines, and Shapes
To add a borderless picture frame:
The mouse pointer changes to the Picture Paste cursor. What you do next determines the initial size and placement of the picture frame.
To add a picture to a frame:
Replace Picture directly under the selected frame, locate and select an image. Click Open.
Take advantage of the Gallery tab to drag and drop various
bordered and basic picture frames onto your page. Choose from frames of different orientations and styles.
The picture is added to the frame using default Picture Frame properties, i.e. it is scaled to maximum fit; aspect ratio is always maintained. However, you can alter the picture's size, orientation and positioning relative to its frame.
To change picture size and positioning:
Select a populated picture frame, and from the accompanying Picture Frame toolbar:
button to position the photo in the picture frame by panning.
Click

Pictures, Lines, and Shapes 155
button to rotate the photo in 90 degree counter- clockwise increments.
button to zoom in/out of the photo.
While you can take advantage of PagePlus's preset frames you can create your own shape (e.g., a morphed QuickShape or closed curve) then convert it to a picture frame.
You can then add a picture to the frame as described previously.
- or -

156 Pictures, Lines, and Shapes
PagePlus lets you insert pictures from a wide variety of file formats, including bitmaps, vector images, and metafiles, and in several different ways. Here's a quick overview:
You can also acquire pictures directly from PhotoCDs or via TWAIN devices (scanners or digital cameras)—see PagePlus help.
To insert a picture into PagePlus you can copy and paste it, drag a file from an external Windows folder directly onto your page, drag a thumbnail from PagePlus's Media bar, or import a picture as an embedded or linked image via a dialog... even place it into a picture frame.
Bordered and unbordered shaped picture frames (p. 153) are a great way to present pictures that can be positioned and cropped within the frame. Drag the former from the Gallery tab; add the latter from the Tools toolbar. You can crop unframed pictures too (p. 70).
Detached pictures float freely on a page, while inline pictures
are incorporated with the text flow in a text object.

Pictures, Lines, and Shapes 157
To import a picture from a file:
Import Picture... button on the Tools toolbar's Picture flyout. In WritePlus: Choose Picture File... from the Insert menu.
The mouse pointer changes to the Picture Paste cursor if there was no insertion point (or you answered No to the prompt). What you do next determines the initial size and placement of the detached picture.
Click the

158 Pictures, Lines, and Shapes
To set the size of the inserted picture, drag out a region and release the mouse button.
To populate a template picture placeholder or replace a picture:
button shown under the selected frame. - or -
Embedding means the picture in PagePlus is now distinct from the original file. Embedding results in a larger PagePlus file, and if you need to alter an embedded picture you'll need to re-import it after editing. Still, it's the best choice if file size isn't an issue and graphics are final.
Linking inserts a copy of the picture file into the PagePlus publication, linked to the actual file so that any changes you later make to it in the native application will be automatically reflected in PagePlus.
The Media Bar acts as a "basket" containing photos for inclusion in your publication. Its chief use is to aid the design process by improving efficiency (avoiding having to import photos one by one) and convenience (making photos always-at-hand). For photo-rich documents in particular, perhaps based on Photo Album design templates, the Media Bar is a valuable tool for dragging photos directly into picture frames or for simply replacing existing pictures on the page.

Pictures, Lines, and Shapes 159
You can even use the AutoFlow feature to add all photos sequentially into available empty picture frames with one click.
The bar can be used as a temporary storage area before placing photos in your document, or it can be used to create more permanent photo albums from which you can retrieve stored photos at any time. By default, photos are added to a temporary album but remember to click the New Album button if you want to save your album for later use. Each time you start PagePlus you simply load that saved album (or any other saved album) or just work with a temporary album— the choice is yours!
Photo albums can be subsequently modified, renamed and deleted—viewing the contents of an individual album or all albums at the same time is possible.
You can import an unlimited number of photos by file or by whole folders, and set photo resolution (native or 96dpi) and whether photos are embedded or linked to your project in advance of photo placement on the page.
For large photo collections, searching throughout albums for photos by file name and EXIF, IPTC or XMP metadata is possible in the search box at the top of the Media Bar; even edit XMP metadata from within PagePlus.
The currently loaded album shown on your Media Bar will
remain visible irrespective of which document you have open.

160 Pictures, Lines, and Shapes
Photo thumbnails can be dragged from the Media Bar directly onto your page, into an existing standalone photo, or into an empty or populated picture frame.
To view the Media Bar:
handle at the bottom of your workspace.
To add photos to a temporary album:
Unless you save it, the temporary album and its photo contents
will not be saved when you close PagePlus.
You can drag one or more files from any Windows folder
directly into the Media Bar window. If you right-click an image in the Media Bar and choose Locate in Explorer you'll open the photo's folder via Windows Explorer—great for drag and drop or just general file management!
To save a temporary album to a named album:
button. From the menu, select New Album.

Pictures, Lines, and Shapes 161
To include a temporary album's photos in an existing saved album, click the Add To button and choose a named album from the menu.
To load a saved album:
To rename or delete an album:
To sort photos in your album:
To add a photo to your page:
AutoFlow lets you flow the photos currently displayed in the Media Bar throughout empty picture frames spread throughout your publication (you can't reflow photos once frames are populated with content). This is especially useful when using Photo Album design templates or other photo-rich documents.
To use this feature, you must have multiple picture frames present in your current document, as well as a range of photos present in your Media Bar. The autoflow process involves a simple click of the mouse button.
AutoFlow—adding content automatically

162 Pictures, Lines, and Shapes
To automatically flow your photos:
button to the right of the bar's workspace. The photos are placed sequentially in your document's available picture frames in the order they appear in the Media Bar.
A dialog will display if you've more picture frames than you have photos and vice versa. To resolve, either remove extra pages or add more frames then add any remaining photos by drag and drop. A placed photo's thumbnail shows a green check in its bottom-right corner, while a photo that is not yet placed will not show the check.
To search for photo details:
on the search box at the top of the Media Bar and pick a Rating from the flyout, e.g. "Rating has 5 stars". Matching photos are shown in the bar's workspace.
search term, e.g. holiday. You can also use the
button to search for photos by tag; tags listed belong to photos currently in the Media bar. Matching photos will appear in the bar's workspace.
Image Cutout Studio offers a powerful integrated solution for cutting objects out from their backgrounds. Depending on the make up of your images you can separate subject of interests from their backgrounds, either by retaining the subject of interest (usually people, objects, etc.) or removing a simple uniform background (e.g., sky, studio backdrop). In both instances, the resulting "cutout" image creates an eye-catching look for your publication.
The latter background removal method is illustrated in the following multi- image example.

Pictures, Lines, and Shapes 163
The white initial background is discarded, leaving interim checkerboard transparency, from which another image can be used as a more attractive background. A red tint on the second image's background is used to indicate areas to be discarded.
To launch Image Cutout Studio:
from the displayed Picture context toolbar. Image Cutout Studio is launched.
It's essential that you choose an output type prior to selecting areas for keeping/discarding. Either an alpha-edged or vector-cropped bitmap can be chosen as your output type prior to selection. The choice you make really depends on the image, in particular how well defined image edges are.
Zoom into your image to examine its edges; this may influence
the output type chosen.
Let's look at the output types and explain the difference between each.

164 Pictures, Lines, and Shapes
Output Type Description and use
Alpha-edged Bitmap Use when cutting out objects with poorly defined edges. Transparency and pixel blending are used at the outline edge to produce professional results with negligible interference from background colors. The term "alpha" refers to a 32-bit image's alpha transparency channel.
Use on more well-defined edges. A cropped image with crop outline is created which can be later manipulated with the crop tools. You can optionally apply feathering to the image edge but will not remove background color.
To create an alpha-edged bitmap:
To create a vector-cropped bitmap:
Vector-cropped Bitmap

Pictures, Lines, and Shapes 165
A pair of brushes for keeping and discarding is used to "paint" areas of the image. The tools are called Keep Brush and Discard Brush, and are either used independently or, more typically, in combination with each other. When using either tool, the brush paints an area contained by an outline which is considered to be discarded or retained (depending on brush type). A configurable number of pixels adjacent to the outline area are blended.
To aid the selection operation, several display modes are available to show selection.
Show Original, Show Tinted, and Show Transparent buttons respectively display the image with:
For Show tinted, a red tint indicates areas to be discarded; a green tint shows areas to be kept.
For Show transparent mode, a different Background color can be set (at bottom of the Studio) which might help differentiate areas to keep or discard.
To select image areas for keeping/discarding:
Discard brush from the left of the Studio workspace.
Keep brush or

166 Pictures, Lines, and Shapes
button reverts to the last made selection.
Make your outline edge as exact as possible by using brush and
touch-up tools before committing your work.
to create your cutout, or click
You'll see your image in your publication in its original location, but with the selected areas cut away (made transparent).
if you want to revert your selected areas and start your cutout again.
The · Click

Pictures, Lines, and Shapes 167
If a vector-cropped image is created via Image Cutout Studio it's possible to subsequently manipulate the crop outline using crop tools. However, for alpha- edged bitmaps, Erase and Restore touch-up tools can be used to refine the cutout area within the Studio before completing your cutout. The latter can't be edited with crop tools.
The touch-up tools are brush based and are only to be used to
fine-tune your almost complete cutout—use your Keep and Discard brush tools for the bulk of your work!
To restore or remove portions of your cutout:
(Output settings tab). You can use the button to check your cutout as you progress.
Erase Touch-up Tool button from the left of the Studio workspace.
Restore Touch-up Tool or
If you've touched up part of your image between each preview,
you'll be asked if you want to save or discard changes.

168 Pictures, Lines, and Shapes
Filters can be applied and managed in PhotoLab, a powerful studio for applying adjustment and effect filters to pictures individually or in combination—all instantly applied and previewed! PhotoLab offers the following key features:
PhotoLab hosts filter tabs, a main toolbar, and applied filter stack around a central workspace.

Pictures, Lines, and Shapes 169
Pictures present in your publication will show in your Images tab (above) if the tab is expanded. This tab is hidden by default in PhotoLab but can be viewed by clicking the
button at the bottom of your workspace.
To launch PhotoLab:
on the Picture context toolbar.

170 Pictures, Lines, and Shapes
Filters are stored in PhotoLab's Favorites, Adjustments, and Effects tabs which group filters logically into categories (e.g., Quick Fix for fast and commonly used correction filters).
The Favorites tab offers some commonly used filters (individual and in combination).You can complement these with your own user-defined filters.
To apply a filter with trialling:
Selecting a new filter always replaces the current filter.

Pictures, Lines, and Shapes 171
Any filter can be temporarily disabled, reset, or deleted from the trial zone.
to enable again.
. Any changes to settings are reverted back to the filter's defaults.
Once you're sure that you want to keep you filter, you'll need to commit the filter to your filters stack.
To commit your filter:
Commit to accept your changes. This adds the filter to the right-most Filters stack where additional filters can be added and built up by using the same method.
Adjustments are applied such that the most recently added
filter always appears at the bottom of the list and is applied to the picture last (after the other filters above it).
To reorder filters:
To add a filter directly (without trialling):
Add Quick Filter at the top of the Filters stack and choose a filter from the flyout categories. The filter is applied directly to the stack without trialling.
, then click

172 Pictures, Lines, and Shapes
PhotoLab offers some useful retouching tools on the main toolbar, each commonly used to correct photos before applying color correction and effects.
Rather than apply a filter to uniformly change the appearance of your picture, you can change only selected regions instead. PhotoLab lets you mask picture areas by painting areas to be either affected by filters or simply left alone.
To apply a mask:
Mask drop-down menu, select New Mask.
Add Region tool to allow you to mask regions by painting.

Pictures, Lines, and Shapes 173

Change the Mode drop-down menu from Select to Protect to
protect painted regions from masking (i.e., the inverse of the Add Region option).

If you've not been as accurate as you'd like while painting, you can
Remove Regions then paint over the unwanted painted regions.
to save your masking changes.
The mask button changes to yellow when a mask is applied.
click

174 Pictures, Lines, and Shapes
It's also possible to create additional masks for the same filter as above, and then choose between masks accordingly. You can only have one mask applied at any one time. By using the menu's New From> option you can also base the new mask on another mask applied to the current or any other filter in the filter stack. This is useful when using favorites containing multiple adjustments.
To edit a mask:
button, choose the mask name and select Edit Mask.
If there's a specific filter setting (or combination of filters) you want to keep for future use it's easy to save it as a favorite. PhotoLab stores all your favorites together in the Favorites tab. You can even create your own categories (e.g. My Adjustments) within the tab.

To save filter(s) as a new favorite:
filter to. (Click
to create new category)
If you want to further manage your favorites into user-defined categories, click the option on the
Tab Menu.

Pictures, Lines, and Shapes 175
If your scanner or digital camera provides TWAIN support, you can import pictures directly into PagePlus using the TWAIN standard. Or, save the scanned image separately and then import into PagePlus.
To set up your TWAIN device for importing:
To import a scanned image:
If you have more than one TWAIN-compatible device installed, you may need to select which source you wish to scan with.
To select a different TWAIN source for scanning:
First the tips... then the theory!

176 Pictures, Lines, and Shapes
PagePlus provides Pencil, Straight Line, Pen, and QuickShape tools for creating simple graphics. Using the line tools, you can draw single lines, connect line segments together, or join line ends to close the line, creating a shape (see Drawing and editing shapes on p. 182 for details). Use the Pointer Tool and the Curve context toolbar to resize or reshape lines once you've drawn them. The context toolbar appears automatically when you select a line or closed shape, and provides a variety of adjustment controls—including adding/deleting nodes and manipulation of curves.

Pictures, Lines, and Shapes 177
The Pencil Tool lets you sketch curved lines and shapes in a freeform way.
The Straight Line Tool is for drawing straight lines (for example, drawn in the column gutter to separate columns); rules at the top and/or bottom of the page; or horizontal lines to separate sections or highlight headlines.
The Pen Tool lets you join a series of line segments (which may be curved or straight) using "connect the dots" mouse clicks.
To draw a freeform line (with the Pencil Tool):
Pencil Tool from the Tools toolbar's Line flyout.

178 Pictures, Lines, and Shapes
To draw a straight line (with the Straight Line Tool):
Straight Line Tool from the Tools toolbar's Line flyout.
To constrain the angle of the straight line to 15° increments,
hold down the Shift key as you drag. (This is an easy way to make exactly vertical or horizontal lines.)
To draw one or more line segments (with the Pen Tool):
Pen Tool from the Tools toolbar's Line flyout. On the Curve context toolbar, three buttons let you select which kind of segment to draw:

A Straight segment is simply a straight line connecting two nodes. (Shortcut: Press 1)

A Bézier segment is curved, displaying control handles for precise adjustment. (Shortcut: Press 2)

Pictures, Lines, and Shapes 179

Smart segments appear without visible control handles, using automatic curve-fitting to connect each node. They are especially useful when tracing around curved objects and pictures. (Shortcut: Press 3)
Use the Pointer Tool in conjunction with the Curve context toolbar to adjust lines once you've drawn them. The techniques are the same whether you're editing a separate line object or the outline of a closed shape.
See PagePlus help for more information on editing lines.

180 Pictures, Lines, and Shapes
All lines, including those that enclose shapes, have numerous properties, including color, weight (width or thickness), scaling, cap (end), join (corner), and stroke alignment. You can vary these properties for any freehand, straight, or curved line, as well as for the outline of a shape. Note that text frames, pictures, tables, and artistic text objects have line properties, too.
In PagePlus, you can control the position of the stroke (i.e., line width) in relation to the object's path, i.e. the line that defines the boundary of the object.
To change line properties of a selected object:
Use the Swatches tab to change the line's color and/or shade. Alternatively, use the Color tab to apply a color to the selected object from a color mixer.
On the Line tab, context toolbar, or Line and Border dialog, the styles drop- down menu provides the following styles: None, Single, Calligraphic, and several Dashed and Double line styles as illustrated below.
•

Pictures, Lines, and Shapes 181
Several techniques offer additional ways to customize lines:
For dotted/dashed lines, select from one of five dashed line styles (see above). - or - (tab and dialog only) Drag the Dash Pattern slider to set the overall pattern length (the number of boxes to the left of the slider) and the dash length (the number of those boxes that are black).
The illustrations below show lines with pattern and dash lengths of (1) 4 and 2, and (2) 5 and 4:

For double lines, select from one of four Double line styles (see above).
(Tab only) For calligraphic lines of variable width (drawn as if with a square-tipped pen held at a certain angle), select the calligraphic line style (opposite) from the drop- down menu, then use the Calligraphic Angle box to set the angle of the pen tip, as depicted in the examples below.

You can also vary a line's Cap (end) and the Join (corner) where two lines intersect.

182 Pictures, Lines, and Shapes
QuickShapes are pre-designed objects of widely varying shapes that you can instantly add to your page.
Once you've drawn a QuickShape, you can morph its original shape using control handles, and adjust its properties—for example, by applying gradient or bitmap fills (including your own bitmap pictures!) or transparency effects.
Another way to create a shape is to draw a line (or series of line segments) and then connect its start and end nodes, creating a closed shape.

The QuickShape flyout contains a wide variety of commonly used shapes, including boxes, ovals, arrows, polygons, and stars.
It’s also possible to use the always-at-hand QuickShape context toolbar situated above the workspace to swap QuickShapes, and adjust a QuickShape’s line weight, color, style, and more. New shapes always take the default line and fill (initially a black line with no fill).

Pictures, Lines, and Shapes 183
To create a QuickShape:
QuickShape flyout on the Tools toolbar and select a shape from the flyout. The button takes on the icon of the shape selected.
To draw a constrained shape (such as a circle):
All QuickShapes can be positioned, resized, rotated, and filled. What's more, you can morph them using adjustable sliding handles around the QuickShape. Each shape changes in a logical way to allow its exact appearance to be altered.
To adjust the appearance of a QuickShape:
To find out what each handle does for a particular shape, move
the Pointer Tool over the handle and read the Hintline.

184 Pictures, Lines, and Shapes
As soon as you draw or select a line, you'll see the line's nodes appear. Nodes show the end points of each segment in the line. Freehand curves typically have many nodes; straight or curved line segments have only two. You can make a shape by extending a line back to its starting point.
To turn a selected line into a shape:
Close Curve button on the Curve context toolbar.
You can go the other way, too—break open a shape in order to add one or more line segments.

Pictures, Lines, and Shapes 185
To break open a line or shape:
Break Curve button on the Curve context toolbar. A line will separate into two lines. A shape will become a line, with the selected node split into two nodes, one at each end of the new line.
See online Help for more information on editing shapes.

186 Pictures, Lines, and Shapes
PagePlus provides a variety of filter effects that you can use to transform any object. "3D" filter effects let you create the impression of a textured surface and are covered elsewhere (see p. 190). Here we'll look at 2D filter effects exclusively. The following examples show each 2D filter effect when applied to the letter "A."
Drop Shadow Inner Shadow Outer Glow Inner Glow
Inner Bevel Outer Bevel Emboss Pillow Emboss
Gaussian Blur Zoom Blur Radial Blur Motion Blur
Color Fill Feather Outline Reflection

Pictures, Lines, and Shapes 187
The Studio’s Styles tab offers a range of 2D filter effects that are ready to use. Its multiple categories each offer a gallery full of predefined effects, such as Shadows, Bevels, Reflections, Blurs, and more. Each category offers subtle variations of the category effect. Click any thumbnail to apply the effect to the selected object.
PagePlus additionally provides the Shadow Tool for applying a shadow to an object directly in your publication. Control handles let you adjust shadow blur, opacity and color.
To apply 2D filter effects:
Filter Effects button on the Attributes toolbar. - or - Choose Filter Effects... from the Format menu (or via the right-click menu). The Filter Effects dialog appears.

188 Pictures, Lines, and Shapes
A simple way to add creative flair to your page is to apply a vertical reflection on a selected object. The effect is especially eye-catching when applied to pictures, but can be equally impressive on artistic text, such as page titles or text banners. A combination of settings can control reflection height, opacity, offset and blurring.
PagePlus lets you create a colored outline around objects, especially text and shapes (as a filter effect). For any outline, you can set the outline width, color fill, transparency, and blend mode. The outline can also take a gradient fill, a unique contour fill (fill runs from the inner to outer edge of the outline width), or pattern fill and can also sit inside, outside, or be centered on the object edge.
As with all effects you can switch the outline effect on and off. You'll be able to apply a combination of 2D or 3D filter effects along with your outline, by checking other options in the Filter Effects dialog.
Shadows are great for adding flair and dimension to your work, particularly to pictures and text objects, but also to shapes, text frames and tables. To help you create them quickly and easily, PagePlus provides the Shadow Tool on the Attributes toolbar. The tool affords freeform control of the shadow effect allowing creation of adjustable basic or skewed edge-based shadows for any PagePlus object.

Pictures, Lines, and Shapes 189
Basic (left) and skewed shadows (right) applied to a basic
Adjustment of shadow color, opacity, blur, and scaling/distance is possible using controllable nodes directly on the page (or via a supporting Shadow context toolbar). Nodes can be dragged inwards or outwards from the shadow origin to modify the shadow's blur and opacity. For a different color, pick a new color from the Color or Swatches tab while the tool is selected. Depending on if a basic or skewed shadow is required, the origin can exist in the center (shown) or at the edge of an object, respectively.
Once you've created a shadow, you can also fine-tune it as needed using the Filter Effects dialog.
square QuickShape

190 Pictures, Lines, and Shapes
3D filter effects go beyond 2D filter effects (such as shadow, glow, bevel, and emboss effects) to create the impression of a textured surface on the object itself. You can use the Filter Effects dialog to apply one or more effects to the same object. Keep in mind that none of these 3D effects will "do" anything to an unfilled object—you'll need to have a fill there to see the difference they make!
The Studio’s Styles tab is a good place to begin experimenting with 3D filter effects. Its multiple categories each offers a gallery full of pre-defined mixed 2D and 3D effects, using various settings.
There you’ll see a variety of remarkable 3D surface and texture presets in various categories (Glass, Metallic, Wood, etc.). Click any thumbnail to apply it to the selected object. Assuming the object has some color on it to start with, you’ll see an instant result!
Alternatively, you can customize a Styles tab preset, or apply one or more specific effects from scratch, by using Filter Effects.

Pictures, Lines, and Shapes 191

To apply 3D filter effects:
Filter Effects on the Attributes toolbar.
button is normally down, which links the two sliders so that sharp changes in Depth are smoothed out by the Blur parameter. To adjust the sliders independently, click the button so it's up.
Show/Hide Preview button. When expanded, the effects are applied only in the preview window. While the pane is collapsed (click the button again), filter effects are applied directly to the object on the page. The former approach lets you work on your effects in isolation without other page objects interfering while fine-tuning your effects.

192 Pictures, Lines, and Shapes
Use zoom in/out buttons or a percentage magnification for detailed work.
The 3D Bump Map effect creates the impression of a textured surface by applying a mathematical function you select to add depth information, for a peak-and-valley effect. You can use 3D Bump Map in conjunction with one or more additional 3D filter effects—but not with a 2D Bump Map.
The 2D Bump Map effect creates the impression of a textured surface by applying a grayscale bitmap you select to add depth information, for a peak-and- valley effect. You can use 2D Bump Map in conjunction with one or more additional 3D filter effects—but not with a 3D Bump Map.
The 3D Pattern Map effect creates the impression of a textured surface by applying a mathematical function you select to introduce color variations. You can use 3D Pattern Map in conjunction with one or more other 3D filter effects.
The 2D Pattern Map effect creates the impression of a textured surface by applying a grayscale bitmap you select to introduce color variations. You can use 2D Pattern Map in conjunction with one or more other 3D filter effects.
The uniform transparency of an object (with 3D filter effects applied) can be controlled via the Transparency tab (see first example below). However, for more sophisticated transparency control, especially for simulating reflective lighting effects on glass objects, transparency settings can instead be set within the 3D filter effects dialog (check the Transparency option). The effect can be used to create more realistic transparency by independently controlling

Pictures, Lines, and Shapes 193
transparency on reflective (edges) and non-reflective (flat) areas of the object (see front heart shape below).
The 3D Reflection Map effect is used to simulate mirrored surfaces by selection of a pattern (i.e., a bitmap which possesses a shiny surface) which "wraps around" a selected object. Patterns which simulate various realistic indoor and outdoor environments can be adopted, with optional use of 3D lighting to further reflect off object edges.
The 3D Lighting effect works in conjunction with other 3D effects to let you vary the surface illumination and reflective properties.

194 Pictures, Lines, and Shapes
Using the Instant 3D feature, you can easily transform flat shapes (shown) and text into three-dimensional objects.
PagePlus provides control over 3D effect settings such as:
An always-at-hand 3D context toolbar hosted above your workspace lets you configure the above settings—each setting contributes to the 3D effect applied to the selected object. For on-the-page object control you can transform in 3D with use of a red orbit circle, which acts as an axis from which you can rotate around the X-, Y-, and Z-axes in relation to your page. Look for the cursor changing as you hover over the red circles' nodes or wire frame.

Pictures, Lines, and Shapes 195
X and Y rotation
Transform about your 3D objects' axes instead of your pages'
axes by holding the Ctrl key down as you transform using the nodes.
You can also adjust the angle and elevation of each "active" light on the page by dragging the light pointer to a position which simulates a light source.
After any transformation, the underlying base object remains
editable.
To add dimensionality:
Instant 3D button on the Attributes toolbar. The object immediately adopts 3D characteristics with a red orbit circle displayed in the object's foreground.
on the context toolbar to revert to the object back to its initial transformation.
To switch off 3D effects:
on the context toolbar. You can always click the Attribute toolbar's Instant 3D button at any time later to reinstate the effect.

196 Pictures, Lines, and Shapes
To edit base properties of a 3D object:
The original object's shape is shown, allowing its selection handles to be manipulated for resizing and rotating.

Object styles benefit your design efforts in much the same way as text styles and color schemes. Once you've come up with a set of attributes that you like— properties like line color, fill, border, and so on—you can save this cluster of attributes as a named style. PagePlus remembers which objects are using that style, and the style appears in the Styles tab, and can subsequently be applied to new objects. For example a Quick Star can have a stone effect applied via an object style you've saved previously (all object styles use a cog shape as the default object preview type).
Here's how object styles work to your advantage:

Pictures, Lines, and Shapes 197
The Styles tab contains multiple galleries of pre-designed styles that you can apply to any object, or customize to suit your own taste! Galleries exist in effect categories such as Blurs, 3D, Edge, Warps, Shadows, Materials (e.g., metals) and more, with each category having further subcategories.
To apply an object style to one or more objects:
To remove an object style from a gallery:

198 Pictures, Lines, and Shapes
To unlink an object from its style definition:
If you've applied a style to an object but have lost track of the thumbnail—or want to confirm which style is actually being used on an object—you can quickly locate the thumbnail from the object.
To locate an object's style in the Styles tab:
The Styles tab displays the gallery thumbnail for the object's style.
Normally, a publication's object styles are just stored locally—that is, as part of that publication; they don't automatically carry over to new publications. If you've created a new style you'll want to use in another publication, you can save it globally so that it will appear in the Styles tab each time you open a new publication.
To create a new object style based on an existing object's attributes:
The Style Attributes Editor dialog appears, with a tree listing object attributes on the left and a preview region on the right (not shown).

Pictures, Lines, and Shapes 199
Once an object style is listed in a gallery, you can modify it or create a copy (for example, to define a derivative style) by right-clicking on its thumbnail and choosing Edit... or Copy....
To save a publication's object styles globally:
The Gallery tab serves as a container for storing your own design objects you'd like to reuse in different publications. It also includes sample designs and is stocked with a wide variety of pre-designed elements that you can customize and use as a starting point for your own designs. Once you've copied a design to the Gallery, it becomes available in any publication—simply open the Gallery!

200 Pictures, Lines, and Shapes
Designs are stored in categories such as Business, Education, Fun, Picture frames, logos, and flashes.
The Gallery has two parts: an upper Categories drop-down menu and a lower Designs window showing a list of thumbnails representing the designs in the selected category. You can adopt a design by dragging the thumbnail onto the page.
The Gallery tab can store your own designs in the ready-to-go My Designs category—the design is made available in any PagePlus project. When you first install PagePlus, the My Designs gallery will be empty, ready for custom designs to be added to it. New categories can be created at any time.
To further arrange your designs into logical groupings, you can add sub- categories to My Designs or to any other custom or pre-defined category.
Designs can be added to any pre-supplied category; the My
Designs category exists simply for ease of use when storing your own custom designs.
To use a design from the Gallery:

Pictures, Lines, and Shapes 201
To view your Gallery:
To add, delete, or rename custom categories:
Tab Menu and choose Add category..., Remove category, or Rename category... from the drop- down list.
If adding a category, you need to name the category in a dialog. For removal or deletion, simply pick the category in advance of picking the option.
All designs in a deleted category will also be lost!
To add, delete, or rename custom sub categories:
Tab Menu button.
drop-down button on the sub category title bar.
To move or copy an object into the Gallery:
tab's

202 Pictures, Lines, and Shapes
To rename or delete a custom design from the Gallery:
drop-down button in the bottom-right corner of a thumbnail (shown by hover over) and choose from the menu.
Two Connector tools let you create dynamic link lines between any two objects. These connectors remain anchored to the objects, even if either or both of them are moved or resized. So, for example, it's easy to create a flow chart with connectors between boxes, then freely rearrange the layout while preserving the directional relationships!

The Connector Tool lets you draw a single, straight- line connector between any two connection points.
The Elbow Connector Tool lets you draw a connector with only vertical and horizontal segments—for example, if you're creating a flow chart, organization chart, or tree diagram.
To make connections easy, each PagePlus object has default connection points, displayed whenever you select a Connector tool and hover over a target object. These default points (which can't be moved or deleted) are normally evenly distributed around an object's shape.

Pictures, Lines, and Shapes 203
To create a connector:
For a straight-line connector, select the Connector Tool on the Connector Tools flyout (Tools toolbar). - or -
For an elbow connector, select the Elbow Connector Tool from the same location.



Instead of using an object's default connection points, you can create your own custom connection points by either hovering over any shape's edge and dragging from that originating point or by simply creating a custom connection point with the Connection Point Tool. They can also be placed anywhere on the page, and are especially useful when creating a connection onto grouped QuickShapes or more complex grouped objects such as symbols.
- or -

204 Pictures, Lines, and Shapes
To add a custom connection point (with tool):
Connection Point Tool on the Connector Tools flyout (Tools toolbar).
To view the connection points again you have to hover over the object which was selected while the connection point was created. Remember to enable either the Connector Tool or Elbow Connector Tool in advance.
To move a custom connection point, select the object to which it is associated and drag the point with the Connection Point Tool.
To delete a custom connection point you've added, use the Connection Point Tool to click the object to which the connection point was associated, click the connection point you want to delete, and then press Delete. Default nodes are fixed and can't be deleted.
To move, reshape, or detach/reattach a connector, use the Pointer Tool to drag individual nodes. Drag the end node of a connector to detach or reattach it. (See Drawing and editing lines on p. 176).
As connectors are treated as ordinary lines, you can color them (see p. 207) and format them with the Line tab to add arrows, feathers, or other decorative line end. (See Setting line properties on p. 180.)


206 Color, Fills, and Transparency

Color, Fills, and Transparency 207
PagePlus offers a number of ways to apply solid colors to objects of different kinds:
You can use the Color tab, Swatches tab or a dialog box to apply solid colors to an object.
To apply a solid color via the Color tab:
Text button at the top of the tab to determine where color will be applied. The color of the underline reflects the color of your selected object. For selected frame text, the Fill will be the background text color (but not the frame's background color).
Fill, · Line, or

208 Color, Fills, and Transparency
To apply a solid color via the Swatches tab:
Text button at the top of the tab to determine where color will be applied.
Select a color swatch from the Publication palette (commonly used colors and those previously applied to your publication) or standard Palette (supplied preset swatches).
Alternatively, use Format>Fill... to apply color via a dialog.
To change a solid color's shade/tint (lightness):
percentage tinting via slider or direct input to apply object tinting from the Swatches tab.
PagePlus automatically adds used colors to the
Publication Palette in the Swatches tab.
To change the current palette:
Palette button to view and adopt colors from a Standard RGB, Standard CMYK, or selection of themed palettes. Colors can be added, edited, or deleted from the Publication Palette but not from other palettes.
Fill, · Line, or · Adjust the

Color, Fills, and Transparency 209
In PagePlus, a color scheme is a cluster of five complementary colors that you can apply to specific elements in one or more publications. The Schemes tab displays preset schemes which can be selected at any point during the design process. Each publication can have just one color scheme at a time; the current scheme is highlighted in the Schemes tab. You can easily switch schemes, modify scheme colors, apply schemes to any publication, even create your own custom schemes. Color schemes are saved globally, so the full set of schemes is always available.
Color schemes in PagePlus work much like a paint-by-numbers system, where various regions of a layout are coded with numbers, and a specific color is assigned (by number) to each region. For example, imagine a line drawing coded with the numbers 1 through 5. To fill it in, you'd use paint from jars also numbered 1 through 5. Swapping different colors into the paint jars, while keeping the numbers on the drawing the same, would produce quite a different painting.
In PagePlus, the "paint jars" are five numbers you can assign to objects in your publication. They're known as "Scheme Color 1," "Scheme Color 2," and so on. When you apply Scheme Color 1 to an object, it's like saying, "Put the color from jar number 1 here."
The example below shows three different schemes as applied to a design that's been marked with Scheme Colors 1 through 5 as in the example above.

210 Color, Fills, and Transparency
To select a color scheme:
You can repeat this selection process indefinitely. When you save a publication, its current color scheme is saved along with the document.
If you create new elements in a publication to which you have applied a color scheme, or start a publication from scratch, how can you extend the current color scheme to the new objects? Although you'll need to spend some time working out which color combinations look best, the mechanics of the process are simple. Recalling the paint-by-numbers example above, all you need to do is assign one of the five current scheme color numbers to an object's line and/or fill.
To assign a scheme color to an object:
Text button at the top of the Swatches tab depending on the desired effect.
If an object's fill uses a scheme color, the corresponding sample in Swatches tab will be highlighted whenever the object is selected.
Fill, · Line, or

Color, Fills, and Transparency 211
PagePlus lets you create your own color scheme either from scratch or by modifying an existing scheme. See online Help for more information.
If you've tried various color schemes but haven't found one that's quite right, you can modify any of the colors in an existing scheme to create a new one, or create your own named scheme from scratch.
To modify or create a color scheme:
On the Edit tab, each of the five scheme color numbers has its own drop-down list, showing available colors in the PagePlus palette.

212 Color, Fills, and Transparency
Gradient fills provide a gradation or spectrum of colors spreading between two or more points on an object. A gradient fill has an editable path with nodes that mark the origin of each of these key colors. A bitmap fill uses a named bitmap— often a material, pattern, or background image—to fill an object.
Linear Elliptical Conical Bitmap
You can apply preset gradient and bitmap fills from the Swatches tab to shapes, text frames, table cells, and to any artistic, frame, and table text. Using the Fill tool from the Attributes toolbar's Fill flyout (or from Format>Fill), you can vary the fill's path on an object for different effects (see PagePlus help).
Applying different transparency effects (using the Transparency tab) won't alter the object's fill settings as such, but may significantly alter a fill's actual appearance.
There are several ways to apply a gradient or bitmap fill: using the Fill Tool, the Swatches tab, or a dialog.
The easiest way to apply a gradient or bitmap fill is to use one of a range of pre- supplied swatch thumbnails in the Swatches tab's Gradient or Bitmap palettes. The Fill Tool and a Fill dialog are alternative methods for creating gradient fills.
To apply a gradient or bitmap fill using the Swatches tab:
Fill button is selected. Note that the color of the underline reflects the color of your selected object.
For gradient fills, select a gradient category, e.g. Linear, Elliptical, etc., from the Gradient button's drop-down menu.

Color, Fills, and Transparency 213
For bitmap fills, select a drop-down menu category from the Bitmap button.
To apply a gradient fill with the Fill Tool:
Fill Tool button on the Attributes toolbar's Fill flyout.
Alternatively, a dialog can be used to add or subtract key colors from the gradient, apply different key colors to individual nodes, or vary the overall shading of the effect applied to the object.
To apply or edit a gradient or bitmap fill using a dialog:
- or -

214 Color, Fills, and Transparency
Fill button on the Attributes toolbar's Fill flyout.
- or - · Click the

Color, Fills, and Transparency 215
When you select a fillable object, the Fill tool becomes available (otherwise it's grayed out). If the object uses a gradient fill, you'll see the fill path displayed as a line, with nodes marking where the spectrum between each key color begins and ends. Adjusting the node positions determines the actual spread of colors between nodes. You can also edit a gradient fill by adding, deleting, or changing key colors (see online Help).
(A) Node (Start key color), (B) Node (End key color), and (C) Fill Path.
To adjust the gradient fill path on a selected object:
Fill Tool button on the Attributes toolbar's Fill flyout. The object's fill path appears.
Each gradient fill type has a characteristic path. For example, Linear fills have single-line paths, while Radial fills have a two-line path so you can adjust the fill's extent in two directions away from the center. If the object uses a bitmap fill, you'll see the fill path displayed as two lines joined at a center point. Nodes mark the fill's center and edges.

216 Color, Fills, and Transparency
Transparency effects are great for highlights, shading and shadows, and simulating "rendered" realism. They can make the critical difference between flat-looking publications and publications with depth and snap. PagePlus fully supports variable transparency and lets you apply solid, gradient, or bitmap transparencies easily.
Transparencies work rather like fills that use "disappearing ink" instead of color. The more transparency in a particular spot, the more "disappearing" takes place there, and the more the object(s) underneath show through. Just as a gradient fill can vary from light to dark, a transparency can vary from more to less, i.e. from clear to opaque, as in the illustration:

Color, Fills, and Transparency 217
In PagePlus, transparency effects work very much like grayscale fills. Just like fills...
Transparency types available in the Transparency tab are as follows:
You can apply transparency to shapes, text frames, table cells, and to any artistic, frame, and table text.
To apply transparency with Transparency tab:
Solid button and pick a thumbnail from the solid transparency gallery. The lighter thumbnails represent more transparency (expressed as percentage Opacity). - or -

218 Color, Fills, and Transparency
For gradient transparency, choose the
Gradient button and pick your thumbnail. - or -
For bitmap transparency, choose the
Bitmap button and pick a thumbnail from a range of categories.
Alternatively, drag the desired thumbnail from the gallery to an object, and release the mouse button.
To apply gradient transparency with the Transparency Tool:
Transparency Tool on the Attributes toolbar's Transparency flyout. - or - Select Format>Transparency....
Once you've applied a gradient transparency, you can adjust or replace its path on the object, and the level of transparency along the path. You can even create more complex transparency effects by adding extra nodes to the path by clicking and assigning different levels to each node.
To adjust the transparency path:
Transparency Tool to drag individual nodes, or click on the object for a new start node and drag out a new transparency path. The effect starts where you place the start node, and ends where you place the end node. For bitmap transparencies, the path determines the center and two edges of the effect.

Color, Fills, and Transparency 219
Editing a gradient transparency path is similar to editing a comparable fill path. Adding a level of transparency means varying the transparency gradient by introducing a new node and assigning it a particular value. For transparencies with multiple nodes, each node has its own value, comparable to a key color in a gradient fill. Note that you cannot alter the values in a bitmap transparency.
To edit a gradient transparency directly:
Transparency Tool button. The object's transparency path appears, with start and end nodes.

The higher the percentage value assigned to a transparency node, the more transparent the effect at that point. Note: The hue of the color doesn't matter, only its percentage value—so it's much easier just to choose from the set of gallery thumbnails.

220 Color, Fills, and Transparency
The default transparency means the transparency that will be applied to the next new object you create. Local defaults only affect objects in the current project. For information on setting defaults in PagePlus, see Updating and saving defaults on p. 24.


222 Printing and Publishing

Printing and Publishing 223
The Print Preview mode changes the screen view to display your layout without frames, guides, rulers, and other screen items. Special options, such as tiled output or crop marks, are not displayed. A Trimmed Page mode can be entered which is similar to Print Preview mode but lets you continue designing without layout aids having to be displayed.
To preview the printed page:
Print Preview on the Standard toolbar.
In Print Preview mode, the lower toolbar provides a variety of familiar view options, plus the Multisheet button, which lets you preview your pages using a page array.
To arrange multiple pages in the preview window:
Multisheet button. An array selector appears.

To return to single page view:
Multisheet button and select the "1x1 Sheets" array.
To cancel Print Preview mode:
Close button.

224 Printing and Publishing
Trimmed Page Mode lets you toggle between the page you're currently working on (complete with visible guides, pasteboard objects, text marks, special l characters, etc.) and a preview page which shows how your page will appear in print.
You can still edit page content while in Trimmed Page mode.
To enter Trimmed Page mode:
Trimmed Page Mode on the Hintline toolbar.
PagePlus supports scaling, tiling, manual duplex printing, and many other useful printing options. Here we'll cover what you need to know for basic desktop printer output.
To set up your printer or begin printing:
Print on the Standard toolbar. The Print dialog appears.

Printing and Publishing 225
You can save the current combination of settings made in the Print dialog as a print profile with a unique name.
To save current print settings as a print profile:
The settings are saved as a file with the extension .ppr.
You can restore the profile later, simply by choosing its name in the Print profile list. Choose Defaults to revert to PagePlus's original settings.

226 Printing and Publishing
Printing to duplex printers can give your greetings cards and other documents the edge. It can also save money by allowing you to use less paper. However, not all printers have this built-in duplexing function and are considered simplex (supporting single-sided printing only). Using the Manual Duplex Printer Setup wizard, you can overcome this limitation of simplex printers by flipping pages in the printer's paper tray when prompted—your publication prints double-sided!
To setup, the wizard asks you printer-related questions. You'll need to:
To print, you need to select a Manual Duplex double-sided option.
Double-sided printing to duplex printers is unaffected by
PagePlus's manual duplex printing.
To set up your printer for manual duplex printing:
To adjust the printer setup without running the wizard again, use the equivalent settings in the Duplex tab (under the above button).

Printing and Publishing 227
To print (using manual duplex):
PagePlus automatically performs imposition of folded publications when you use File>Page Setup... and select or define a Folded Publications type. The settings ensure that two or four pages of the publication are printed on each sheet of paper, with pages printed following the booklet sequence. This saves you from having to calculate how to position and collate pairs of pages on a single larger page, and lets you use automatic page numbering for the booklet pages.
To produce double-sided sheets, use your printer's double-sided option or run sheets through twice, printing first the front and then the back of the sheet (reverse top and bottom between runs). The sheets can then be collated and bound at their center to produce a booklet, with all the pages in the correct sequence.
Posters and banners are large-format publications where the page size extends across multiple sheets of paper. To have PagePlus take care of the printing, set up your publication beforehand using File>Page Setup... (with the Large Publications option) to preview and select a particular preset arrangement.

228 Printing and Publishing
Even if the publication isn't set up as a poster or banner, you can use tiling and scaling settings (see "Tiling" below) to print onto multiple sheets from a standard size page. Each section or tile is printed on a single sheet of paper, and the various tiles can then be joined to form the complete page. To simplify arrangement of the tiles and to allow for printer margins, you can specify an overlap value.
PagePlus will print each page of the publication at a reduced size, with the specified number of small pages or "thumbnails" neatly positioned on each printed sheet.
Scaling

Printing and Publishing 229
The multiple page options are enabled when you are working with a page from the Small Publications category in Page Setup. You can select the number of times to repeat each page, and tell PagePlus to skip a certain number of regions on the first sheet of paper. Skipping regions is useful if, for example, you've already peeled off several labels from a label sheet, and don't want to print on the peeled-off sections. Check the Preview window to see how the output will look.
Each section or tile is printed on a single sheet of paper; the various tiles can then be joined to form the complete page. Use this option for printing at larger sizes than the maximum paper size of your printer, typically for creating banners and posters. To simplify arrangement of the tiles and to allow for printer margins, you can specify an overlap value.
PDF (short for Portable Document Format) is a cross-platform WYSIWYG file format developed by Adobe to handle documents in a device- and platform- independent manner. The format has evolved into a worldwide standard for document distribution which works equally well for online or professional electronic publishing.
To export your publication as a PDF file:

230 Printing and Publishing
Publish PDF on the Standard toolbar.
If you checked Preview PDF file in Acrobat, the resulting PDF file appears in the version of Adobe Reader installed on your system.
Bookmarks are optional links that appear in a separate pane of the Adobe Reader when a PDF file is displayed.
Typically, a bookmark links to a specific location such as a section heading in the publication, but it can also link to a whole page. You can insert bookmarks by hand, or PagePlus can apply automatic generation to produce a nested bookmark list up to six levels deep, derived from named styles in your publication.

Printing and Publishing 231
A Bookmark Manager enables you to view all your bookmarks at a glance, organize them into a hierarchy of entries and subentries, and create, modify or delete existing bookmarks as needed.
To use styles to automatically generate bookmarks:
In the dialog, you'll see a list of all the style names used in your publication.
The mechanics of creating a PDF bookmark list by hand are simple. For example, bookmarking a specific location (for example, a piece of text or a graphic object) entails placing an anchor at that location; the anchor serves as the target for the bookmark link.
To insert bookmarks by hand:

232 Printing and Publishing
To delete bookmarks and anchors:
Unlike hyperlinks, bookmarks also work as actual links within PagePlus publications. You can use the Bookmark Manager as a jumping-off point to any bookmarked entry.
- or -

Printing and Publishing 233
PagePlus lets you share your publication as native PagePlus publication (.ppp) via an email file attachment.
To share your PagePlus publication:
An Internet connection is required for the emailing of
publications.

234 Printing and Publishing


236 Index












Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.