


Our main office (UK, Europe):
The Software Centre PO Box 2000, Nottingham, NG11 7GW, UK
Customer Service/ Technical Support:
North American office (USA, Canada):
The Software Center 13 Columbia Drive, Suite 5, Amherst NH 03031, USA
Customer Service/ Technical Support:
Visit us on the Web at: http://www.serif.com/
Please contact your local distributor/dealer. For further details please contact us at one of our phone numbers above.

Clipart samples from Serif ArtPacks © Serif (Europe) Ltd. & Paul Harris
Portions images ©1997-2002 Nova Development Corporation; ©1995 Expressions Computer Software; ©1996-98 CreatiCom, Inc.; ©1996 Cliptoart; ©1997 Multimedia Agency Corporation; ©1997-98 Seattle Support Group. Rights of all parties reserved.
Digital Images ©2008 Hemera Technologies Inc. All Rights Reserved.
Digital Images ©2008 Jupiterimages Corporation, All Rights Reserved.
Digital Images ©2008 Jupiterimages France SAS, All Rights Reserved.
Content ©2008 Jupiterimages Corporation. All Rights Reserved.
TrueType font samples from Serif FontPacks © Serif (Europe) Ltd.
Portions graphics import/export technology © AccuSoft Corp. &Eastman Kodak Company& LEAD Technologies, Inc.
THE PROXIMITY HYPHENATION SYSTEM © 1989 Proximity Technology Inc. All rights reserved.
THE PROXIMITY/COLLINS DATABASE® © 1990 William Collins Sons & Co. Ltd.; © 1990 Proximity Technology Inc. All rights reserved.
THE PROXIMITY/MERRIAM-WEBSTER DATABASE® © 1990 Merriam-Webster Inc.; © 1990 Proximity Technology Inc. All rights reserved.
The Sentry Spelling-Checker Engine © 2000 Wintertree Software Inc.
The ThesDB Thesaurus Engine © 1993-97 Wintertree Software Inc.
WGrammar Grammar-Checker Engine © 1998 Wintertree Software Inc.
Andrei Stcherbatchenko, Ferdinand Prantl
eBay © 1995-2008 eBay Inc. All Rights Reserved.
PayPal © 1999-2008 PayPal. All rights reserved.
Roman Cart © 2008 Roman Interactive Ltd. All rights reserved.
Mal's © 1998 to 2003 Mal's e-commerce Ltd. All rights reserved.
iTunes © 2000 to 2008 Apple Computer, Inc. All rights reserved.
YouTube © 2008 YouTube, LLC
phpBB © 2000, 2002, 2003, 2007 phpBB Group
All Serif product names are trademarks of Serif (Europe) Ltd. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks acknowledged.
Serif WebPlus X2 © 2008 Serif (Europe) Ltd.












Contents



2 Welcome to WebPlus X2

Welcome to WebPlus X2 3
Welcome to WebPlus X2 from Serif— still the easiest way ever to get your business, organization, or household on the Web!
If you've used WebPlus in the past, you'll know that WebPlus offers a powerful and easy way to design and publish your Web site from scratch or by using design templates. Equipped with an operational Internet Service Provider (ISP) account and WebPlus X2, you can get online in the least time and at a low cost— no experience required.
WebPlus X2 builds upon the award winning history of previous versions to bring a vast range of features that help you make exceptional Web sites quickly and easily.

4 Welcome to WebPlus X2
WebPlus makes it easy to apply multiple effects in one go and adjust the settings to get the exact look you require. Each object remains editable once Filter Effects have been applied and they’re easy to turn off for complete flexibility. There’s no need to use a separate design program with all these graphical effects and enhancements quickly to hand in WebPlus.

Welcome to WebPlus X2 5
What's New in WebPlus X2...

6 Welcome to WebPlus X2
All Smart objects now support multiple languages!
For a Blog Smart Object, now add personal profiles, social bookmarking links and use trackbacks for inter-blog cross- referencing. Change blog appearance with different pre-defined Visual Styles (or use your own!) Use Editor groups for multi-author article publishing. Last but not least... users now edit articles in RTF!

Welcome to WebPlus X2 7

8 Welcome to WebPlus X2

Welcome to WebPlus X2 9
..and some very useful additions you've been asking for! Take advantage of customizable keyboard shortcuts! Default ALT text offers better accessibility for exported images. More user-friendly toolbar customization. CAPTCHA spam protection for Serif Web Resources (forms and blogs). Now Publish to Web with automatic upload, then view your live Web site with View site online. Smart Object Preview shows Smart Object contents directly on the page. Use Select All in the Find and Replace feature to view all matching text instances. Sort paragraphs or lists either alphabetically or numerically. Line styles now let you scale line ends (e.g., arrows) and control line end placement. Also include author name, copyright notice, and publication date in page headers. Colour schemes offer an off-page browser window Background Colour and On-page colour settings. The re-designed Transform tab now resizes, repositions, scales or rotates objects from a set anchor position. Alternatively, rotate objects about a moveable on- the-page origin point. Lock QuickShape geometry to preserve original arrows shapes and curved corners. Swap the User Interface look-and-feel—choose Silver, Blue, Aqua, Silver-Blue, or Classic (WebPlus 10 look).
Don't forget to register your new copy, using the Serif Registration
Wizard. That way, we can keep you informed of new developments and future upgrades.

10 Welcome to WebPlus X2
Minimum:
Additional disk resources and memory are required when editing large and/or complex images.
Optional:
To install Serif WebPlus X2, simply insert the Program CD into your DVD/CD drive. If AutoPlay is enabled on the drive, this automatically starts the Setup Wizard. If you are installing WebPlus on Microsoft Windows® Vista, you may need to click on Run autorun.exe from within the Autoplay dialog. If AutoPlay is not enabled (or doesn't start the install automatically), use the Manual install method described below.
The Setup Wizard begins with a Welcome dialog, click Next to proceed. Follow the steps of the wizard, clicking Next each time to proceed. At this point, you may be informed that there is a Reboot Pending. If this happens, we recommend rebooting your PC. Remember to remove the Program CD from the drive and to close all other applications before you restart. The Setup

Welcome to WebPlus X2 11
Wizard should now run successfully when the CD is replaced in the DVD/CD drive.
Please read through the license agreement. Click Next to proceed.
Enter your User Name, Organization (if applicable) and the software Product Key that came with your software. For more information, click
. Click Next.
Choose the language that you want the program to use. Click Next. Select the Default Dictionary Language. Click Next.
At the Setup Options dialog, you have the opportunity to customize your installation.
To install the recommended options, simply click Next. However, if you are concerned about disk space, you may choose to run some of the features from the DVD/CD. The drop-down boxes display the available options for each feature:
Will be installed on the local hard drive. If this option is selected, it will install the feature to your hard disk but will not automatically install any subfeatures that may be available.
Entire feature will be installed on the local hard drive. By selecting this option, all of the subfeatures relating to this feature will also be installed. Some subfeatures can require a substantial amount of hard disk space.
Will be installed to run from [Media Type]. If this option is selected, you will save space on your hard disk but you will need to have the installation media at hand to access the features.
Entire feature will be installed to run from [Media Type]. This option this option will allow you to access the content and all of its subfeatures from the installation media, saving you disk space.
Will be installed to run from network. If you are installing the software from a network, this option will allow you to access the content from the network storage, saving you disk space.

12 Welcome to WebPlus X2
Entire feature will be installed to run from network. If you are installing the software from a network, this option will allow you to access the features and all related subfeatures from the network storage, saving you disk space.
Entire feature will be unavailable. By choosing this option, you will not be able to use the selected feature. However, if you later decide that you want to use the feature, you will be able to install it by modifying your installation.
When you select a feature installation option, the information pane on the right of the list will inform you of the amount of hard disk space that the feature needs. Not all installation options are available for all features.
If disk space is not an issue, you may decide to install the entire
program to your hard disk. This can improve performance and you will be able to use all of the features without the need to keep the program disk in your DVD/CD drive.
If you do not want to install the program to its default location, click the Change button. Browse to the folder that you want to install WebPlus in and click OK. Caution should be taken here as changing the default settings may affect subsequent installs of later versions of the software.
Changing the installation defaults may result in some options of
the program being unavailable. It is only recommended for advanced users.
At the Shortcut Options screen, you can choose to automatically create shortcuts by checking the option boxes. Click Next.
Click Install to accept your settings and install the program. The dialog will display a progress bar as the program installs. Once installation is complete, click Finish to exit the Setup Wizard.
[Optional] If you've also obtained the WebPlus X2 Resource CD, install it now following the same procedure you used for the Program CD.
Your installation is now complete and you can begin using Serif WebPlus X2!
• · •

Welcome to WebPlus X2 13
For manual installation, use My Computer (Windows® XP), or Computer (Windows® Vista), to navigate to the DVD/CD drive in which your WebPlus Program CD is located. Double-click the DVD/CD drive, double-click setup.exe in the displayed folder, choose Serif WebPlus X2 from the menu, then follow the on-screen installation instructions.
To modify, repair or remove the installation:
Microsoft Windows® XP:
button and select Control Panel from the Windows Start menu.
Microsoft Windows® Vista:
Start button and click Computer.
button.
You can also access this via Programs and Features by clicking Control Panel from the Windows Start menu (or Settings>Control Panel from the "Classic" Windows Start menu), clicking Programs and then clicking Programs and Features.
To change the installed features:
Open the Setup Wizard as described in the previous steps. To change the installation, select the Modify option and then click Next. From here, you will be able to change the program language or add/remove some of the program

14 Welcome to WebPlus X2
features. Adding additional content may prompt you to insert your original WebPlus X2 Program CD; removing content does not require this CD. See the steps in First-time install if you are unsure about any of the options.
Some features, such as fonts, cannot be removed by the Setup
Wizard once they have been installed. This is due to the way they are used by other applications. Modifying the installation settings in this case will never free up disk space. Fonts in particular, will even remain if the program is completely uninstalled.
Open the Setup Wizard. Select the Remove option and click Next. Click Remove to completely remove WebPlus X2 from your computer.
On occasion, it may be necessary to repair your installation of WebPlus X2. Open the Setup Wizard and select the Repair option and click Next. Click Repair. Once the repair has completed, open WebPlus X2. Any problems should now be resolved.
Removing WebPlus X2 · Repairing WebPlus X2

Started

16 Getting Started

It can be as simple as choosing and customizing a Web template... or you can start from scratch—it's up to you. Either way, you'll appreciate the ease with which WebPlus lets you revise text, graphics and adjust the design of each page. WebPlus gives you the freedom to lay out page elements in any composition that suits you. It's a bit like putting together a newsletter—so if you're already comfortable with the basics of DTP, you'll find it easy going. If you're just beginning, you can learn to use WebPlus tools as you go.
WebPlus lets you assemble all the elements of your site-in-progress into one convenient, multi-page document that can be saved in a single step as a WebPlus project file. At any time—again with just one step—you can publish the project as a separate set of pages that comprise your Web site.
The Internet is a global network that interconnects computers around the world. The Web began as a way of using the Internet to access information stored in a file format known as HTML, or Hypertext Markup Language. Broadly defined, a Web site is a collection of (mostly) HTML files stored on a file server that someone with a Web browser can get to. Actually, Web sites don't depend on the Internet at all—they can be (and often are) accessed just as well over a local area network or private intranet. Remember, a Web site is just a collection of files.
The HTML format is a way of describing the layout of a page. An HTML file uses plain text with various embedded codes to describe a page that somebody has designed, consisting of text and clickable hypertext links. Besides HTML files, a Web site generally includes other files (pictures, for example) that the designer has seen fit to incorporate. A Web browser such as Microsoft Internet Explorer or Mozilla Firefox is a program that can read an HTML file and display the page (one hopes) the way the designer intended it to look
Typically, a Web site has a single Home Page using a standard file name like INDEX.HTML. The Home Page is the first page a visitor sees. It usually will contain links to other pages on the site, which in turn have links to others.
Getting Started 17

To the person using a Web browser to access the site, the information appears seamlessly linked—navigable with a click of the mouse.
WebPlus takes the pages you've laid out and converts them to HTML.
You can preview one or more pages at any time, either within WebPlus (using a special window based on the Internet Explorer browser) or separately using any browser installed on your system.
Publishing a site with WebPlus is a one-step operation that both: (1) converts your project to separate files for the Web, and (2) copies the Web files to a location you specify, either to a local folder or to a Web host.
One advantage WebPlus has over a dedicated Web-page creation program is that you can take your newsletter layout, or a print ad with a wild mix of multicolour graphics and fancy typography, and publish them intact to the Web. In fact, your page can look as great on the Web as it did on your screen!
While you don't have to know HTML (the description language for Web pages) to use WebPlus, you should understand that:
18 Getting Started

If you're used to working in a Desktop Publishing environment, you may have to scale back your typographic expectations somewhat when designing for the Web. However, WebPlus gives you a lot of design latitude. In laying out text, you can specify any point size, use variable leading and letter spacing, and even justify paragraphs! The result is a nearly WYSIWYG match between what you see on-screen in WebPlus and what ends up in the Web browser; HTML positions elements using absolute co-ordinates, overlapping elements are allowed, and file sizes are reduced.
In theory, you can use any font you like. However, if a specified font isn't present on a visitor's computer, an available font will be substituted, with unpredictable results for your beautifully designed layout! As a rule, stick with the WebSafe fonts available within WebPlus. They are shown by default in the Fonts tab and can applied to any currently selected text.
WebPlus's Site Checker will warn you if your site uses unsafe fonts
(non-WebSafe), has navigation problems, or if Form or E- Commerce problems exist.
Getting Started 19

Once WebPlus has been installed, you'll be ready to start. Setup adds a Serif WebPlus X2 item to the Windows Start menu.
The Startup Wizard presents several choices:

The options are self explanatory, where site creation can be made from scratch or from a pre-supplied design template. Previously saved sites can be opened or non-WebPlus Web pages can be imported into your project from file or URL.
The Startup Wizard is displayed by default when you launch
WebPlus. You can switch it off via the Don't show this wizard again check box on the Startup Wizard screen, or on again via the Use Startup Wizard check box in Tools>Options... (use General menu option).
20 Getting Started

The first time you launch WebPlus, you'll see the Startup Wizard, with a menu of six choices. The first of these is Create>Use Design Template. Using a design template speeds you through the process of creating a professional site. Whether you're just beginning to work with WebPlus—or an old hand exploring new design possibilities—put WebPlus templates to work for you!

Categorized WebPlus design templates provide a range of selectable options such as:
Template categories range from Business and E-Commerce, to the more leisure-focused Personal, Entertainment, and Interests.
Getting Started 21

Some templates contain Smart objects (see p. 306) such as newsletter sign ups and polls. As Smart objects are stored in Serif Web Resources they have to be associated with a valid Serif customer account. If you want to make use of the Smart Object (if unwanted just delete them), double-click it and login to Serif Web Resources; this will associate the object to your account.
WebPlus doesn't stop at just offering pages from a single template. You can easily adopt additional pages from a different template to add some style variation within your Web site—for instance, you could create Web pages with a set look and feel, but a separate members-only area could adopt a different look entirely by adding another templates' pages. When adding more template pages you can choose to copy or ignore associated master pages as the pages are added to your Web site. See Adding, removing, and rearranging pages on p. 36 for more details.
To create a Web site using a template:
button next to the category name). The right-hand pane refreshes to display thumbnails of that template's available pages.
The site opens to the first (Home) page, with the Studio's Site tab displayed on the right, showing the various pages that comprise the site in its Site Structure tree.
22 Getting Started

You can open an existing WebPlus site from the Startup Wizard, via the File menu or Standard toolbar. A range of other file formats, including WebPlus templates and Serif PagePlus files can also be opened.
It is also possible to Import Web Pages from existing HTML Web sites via the Startup Wizard. (See WebPlus help or more details.)
To open an existing WebPlus site (Startup Wizard):
To open an existing WebPlus site (during WebPlus session):
Open button on the Standard toolbar.
To revert to the saved version of an open site:
WebPlus supports automatic font substitution as you open a WebPlus site which has fonts which are not stored on your computer. The dialog that shows also lets you manually substitute a missing font if necessary. See WebPlus help for more details.
Getting Started 23

Although design templates can simplify your design choices, you can just as easily start out from scratch with a new, blank Web site.
To start a new site from scratch using the Startup Wizard:
The new site opens with a blank page using default page properties.
To start a new site during your WebPlus session:
WebPlus lets you open more than one site at a time. Each new site you open appears in a separate window with its own settings. Convenient tabs let you switch quickly between windows, and with windows reduced or tiled you can drag and drop objects between windows. You can also preview the current site in a separate window (see Previewing your Web site on p. 321).
To close the current window:
Close button at the upper right. If it's the only window open for the site, the command closes the project and you'll be prompted to save changes.
To save your work:
Save button on the Standard toolbar (or Ctrl+S). OR To save under a different name, choose Save As... from the File menu.
24 Getting Started

and Pages

26 Developing Sites and Pages

Developing Sites and Pages 27
Unlike a printed publication, a Web site doesn't depend on a linear page sequence. When designing a site, it makes more sense to think of the site in spatial terms, with a structure like that of a museum which people will explore. You can generally assume that your visitors will come in through the "front door" (the Home page)—but where they go after that depends on the links you've provided. These navigation pathways are like corridors that connect the various rooms of the museum. It's up to you as the "architect" to develop a sensible arrangement of pages and links so that visitors can find their way around easily, without getting lost
In WebPlus, you can use the Site Structure tree to visually map out the structure of your site and then add navigation elements—special theme graphics that dynamically adapt to the structure you've defined. You'll encounter the Site Structure tree as you learn about working with pages.
Unlike the museum in our analogy, the "structure" of a Web site has nothing to do with its physical layout, or where pages are stored. Rather, it's a way of logically arranging the content on the site so that visitors have an easier time navigating through it. One of the most useful organizing principles—which WebPlus strongly reinforces—is an "inverted tree" structure that starts with the Home page and then branches out to other pages. To the visitor navigating your site, this arrangement presents your content in a familiar, hierarchical way, structured into sections and levels.
A section is a content category, for example "Who's Who?," "Products," or "Links." The various major sections are typically listed on the site's Home page in a navigation bar. Ideally, each page on the site belongs to a particular section. And unless there's only one page in a given section, the section will have its own main page, which usually serves as a menu for subsidiary pages.
The level is the number of steps (i.e. jumps) a given page is removed from the Home page. The Home page will always reside at Level 1, normally along with main section menu pages. This allows navigation bars to work easily and automatically. Pages one step "below" the section menu pages reside at Level 2, and so on.

28 Developing Sites and Pages

In WebPlus, the Site Structure tree (in the Site tab) provides a visual aid that lets you organize the content on your site into sections and levels—in other words as a hierarchy of parent pages branching to child pages. Here's how a similar structure might appear in the WebPlus Site Structure tree:

The Site Structure tree makes it easy to visualize relationships between pages and lay out your site in a way that makes sense for the content you have to offer. Of course, a Web site is truly an interconnected web of pages, and the tree structure doesn't prevent you from installing links between any two pages. But it does expose the major pathways within your site— up, down, and sideways. Logical section/level design makes your site easier to navigate, and WebPlus makes it simple to create navigation bars (or "navbars" for short) that mirror your site structure and help guide your visitors along those "main roads."
button above the Site tab's Site Structure to view pages by their file name rather than their titles.
Click the

Developing Sites and Pages 29
Incidentally, WebPlus also supports HTML pages and offsite links which can be inserted into the Site Structure as for any other page. Either page entry is slightly different in design to a standard web page to indicate that it is based only on HTML code (see Creating HTML pages on p. 247) or that it points to a location outside of the Web site. As an example, compare the HTML page "Overview", the standard Web page "Sales", and the offsite link "Member's forum".

In WebPlus, certain types of theme graphic we'll call "navigation elements"— such as Previous/Next buttons and navbars are pre-programmed to understand your site structure, making it easy to design a site that's simple to navigate. You simply select one from the Studio's Theme Graphics tab and WebPlus does the rest! Previous/Next buttons automatically link laterally, to adjacent pages on the same level. Navbars combine buttons with popup menus to facilitate movement between the various sections and levels of a site.
For example, here's a navbar we selected for the site shown in the main tree above. The buttons provide links to the Home and section menu pages (all at Level 1) and popup menus that link to child pages (Level 2 in this case).

Here's a brief summary of the advantages of incorporating navigation elements in your site design:

30 Developing Sites and Pages
mark in their page entry, while an excluded page lacks the mark. For example, suppose you had a section of reference pages that you didn't want visitors to explore top-down. Excluding the parent page for that section would remove it from the navbar. Of course, you can still create hyperlinks to the page—it just won't appear in navigation elements.
Pages are the basic unit of Web design. WebPlus lets you structure your site's content by arranging pages into a branching "tree," which in turn helps visitors navigate through the site. Looking at individual pages from a design standpoint, each WebPlus page has a "foreground" page layer and a "background" master page layer.

Developing Sites and Pages 31

Master pages are part of the structure of your WebPlus project, and provide a flexible way to store background elements that you would like to appear on more than one page—for example a logo, background, border design, or even a navigation element. The key concept here is that a particular master page is typically shared by multiple pages, as illustrated below. By placing a design element on a master page and then assigning several pages to use that master page, you ensure that all the pages incorporate that element. Of course, each individual page can have its own elements.

The Studio's Site tab includes an upper Master Pages section with icons for each master page, and a lower Site Structure in the Pages window that provides feedback indicating which master page is being used by each of your Web pages:

32 Developing Sites and Pages

The WebPlus workspace consists of a "page" area and a surrounding "pasteboard" area.

The page area is where you put the text, graphics, and other elements that you want to appear on your final Web page. The pasteboard is where you generally keep elements that are being prepared or waiting to be positioned on the page area. When you publish your Web site from the WebPlus project, anything which overlaps the page area appears, while anything entirely on the pasteboard does not. The pasteboard is shared by all pages and master pages, and it's useful for copying or moving objects between pages.

Developing Sites and Pages 33
To move or copy an object between pages via the pasteboard:
WebPlus makes it easy to see exactly what you're working on—from a wide view of a whole page to a close up view of a small region. For example, you can use the scroll bars at the right and bottom of the main window to move the page and pasteboard with respect to the main window. The view automatically re-centres itself as you drag objects to the edge of the screen.
The View toolbar at the top of the screen provides the
Pan Tool as an alternative way of moving around, plus a number of buttons that let you zoom in and out so you can inspect and/or edit the page at different levels of detail.
If you're using a wheel mouse, spinning the wheel scrolls vertically.
Shift-spin to scroll horizontally and Ctrl-spin to zoom in or out!
WebPlus provides a variety of ways of getting quickly to the part of your site you need to work on. The Studio's Site tab provides a central "control panel" including both the Site Structure tree, which depicts the hierarchy of pages in your site (see Understanding site structure and navigation on p. 27), and icons for each of the site's master pages.
The pages will show either their page titles (by default) or file names according to the Toggle between Page Title and Filename button setting. The Site tab lets you switch between pages, and view or set page properties.
The Site Structure dialog (click the
Site Structure button) affords similar tree-based functionality showing pages by their titles or file names, and the Hintline's Page Locator offers yet another convenient method of jumping to a particular page.

34 Developing Sites and Pages
Selecting vs. viewing a page: Single-clicking a page/master page entry merely selects the page, which you might do for example if you were about to delete it from the right-click menu. To actually view the associated page/master page you need to double-click an entry or use one of the methods noted below. Feedback from the entry tells you whether it's currently viewed and/or selected, i.e.
An orange entry (with bolded page name) denotes the selected page.
The eye icon denotes the currently viewed page—which you're able to edit in the workspace. This example shows a viewed (but unselected) page.
A highlighted master page icon in the Site tab's upper window denotes the selected master page.
An eye icon in the master page icon (Site tab's upper window) denotes the currently viewed page—which you're able to edit in the workspace. This example shows a viewed (but unselected) master page.
To view a specific page/master page:
Several methods can be used to view a page:
page navigation buttons. OR Click the entry for the page or master page in the Page Locator list.

Developing Sites and Pages 35

Site Structure button on the Hintline or on the Site tab's Page window. Select the page entry in the dialog's tree (double-click tree entries if necessary to expand each branch). Then click the View Page button.
For master pages:
button to reveal a master page window. One or more master page icons will be displayed.
To switch between the master page and page layer (for the current page):
Page/Master Page button on the Hintline. OR

36 Developing Sites and Pages
As a shortcut to view the site's Home page:
Home Page button on the Hintline.
Using the Studio's Site tab, you can quickly add or delete standard or HTML pages at any level of your site structure, and use drag-and-drop to rearrange pages within the structure as needed, add new master pages, reassign pages to particular master pages, and add offsite links. Use the upper Master Pages window of the Site tab to access master pages, and the Pages window (tab's central Site Structure tree) to access pages. Pages (with page content or blank) can also be added from multi-page templates (see p. 21).
Besides the Site tab, WebPlus offers a variety of other ways to manipulate pages: the Site Structure dialog, the Master Page Manager, and both standard and right-click (context) menus.
To add a new blank page:
Add button directly above the Site tab's Pages window. From the drop-down menu, choose New Blank Page.
A new page appears at the specified location in the site structure.

Developing Sites and Pages 37
When clicked, the Site tab's
Add button will remember its last chosen menu item.
While adding standard pages lets you start page design from scratch, you can make life a little easier by adopting "ready to go"pages from supplied WebPlus templates. To maintain the page's original design, any master page associated with the added page can optionally be "imported" with the page.
To add a new page from a template:
Add button directly above the Pages window. From the drop-down menu choose New Template Page....
As an alternative to blank or template Web pages, HTML pages can be added to any Site tab's Site Structure. Such pages can be included in navigation as for standard pages.

38 Developing Sites and Pages
To add an HTML page:
Add button directly above the Pages window. From the drop-down menu choose New HTML Page.
A new HTML page is added to the Site tab. See Creating HTML pages (p. 247) for more information.
You can also add an offsite link to your site structure. Typically, this would be a page or resource separate from your site that you wanted to include in your site's navigation structure (for example, a forum or blog that you manage via Serif Web Resources). The offsite link appears in the Site Structure tree and in navigation elements, so you can manipulate it just as if it were a page in your site.
To add an offsite link:
Add button directly above the Pages window. From the drop-down menu, choose New Offsite Link....

Developing Sites and Pages 39
To add a new master page:
button is clicked to expand the Master Page Window.
Add button above the Master Pages window. OR
Master Page Manager button above the Master Pages window.
A new master page appears in the Site tab's Master Pages window.
To clone a page:
To delete a page or master page:
Remove button above the window to delete the page.
When you delete a page, you'll have the option to remove any
hyperlinks in your site that point to it, or redirect the hyperlinks to another specified page (hyperlinks to anchors on the deleted page can optionally be deleted).

40 Developing Sites and Pages
Besides using the Site Structure tree to add or delete pages, you can use it to rearrange pages as needed. As explained in Understanding site structure and navigation on p. 27, the tree provides a visual aid that lets you organize the content on your site into "sections" and "levels"—that is, as a hierarchy of parent pages branching to child pages. Not only does the tree help you keep track of your content, but WebPlus translates your logical page arrangement into a site that's easy to navigate. Special theme graphics called navigation elements like Previous/Next buttons and navigation bars (navbars) are pre- programmed to understand your site structure and will update dynamically if you rearrange pages!
Using the parent/child structure, rearranging pages is an intuitive process whether you use drag-and-drop or convenient buttons. You can move a page:
To move a page:
moves the page to the same level as, and following, the page below the cursor;
makes the page a child of the page below the cursor.

Developing Sites and Pages 41
If you've defined more than one master page for your site, you can use a variety of methods to reassign a specific master page to individual pages, one page at a time. You can also set a page to use no master page—for example, if you import an HTML page you may want to see only its original design elements without adding others from a master page. The key thing to remember is that each page can use only one master page. (For an overview, see Understanding pages and master pages on p. 30.)
To assign a master page to a page:
WebPlus allows one or more frames, also known as Iframes, to be placed on a single page, each accessing another page within your Web site. Just like an image, a frame can be placed anywhere on the page and can be drawn to any size. While it's typical to link to a page, you can also link to a range of other link destinations (an Internet page, local file, Smart object, or stored user data) as well.
A great way of always showing the same page (e.g., showing a product list) within every page in your site is to apply a frame to the site's master page. Taking the idea further, you can add selection buttons (or menu options) to change what the frame displays. In more detail, if each button links to a different page (but always to the same frame) the framed document's contents change when clicking different buttons—this takes advantage of the automatically generated HTML ID (see p. 254) which should be referenced as the Target Frame name (type Document Frame) in each button's hyperlink.

42 Developing Sites and Pages

If adding a frame to a master page ensure that the frame's
destination page does not use that same master page (this avoids an unwanted page-in-page effect).
Frames are applied via a Framed Document Tool. The term "Framed Document" is used in WebPlus to keep the concept of Iframes distinct from that of HTML or Creative text frames (used for controlling the placement of text on the page)—both very different features within WebPlus.
WebPlus also supports Active document frames. These are useful when you have a framed Web site and want to open a particular page in a frame. The name of the active document frame is identified by a combination of page and frame name. For example, Home: ifrm_6 represents the "Home" home page and "ifrm_6" an automatically generated frame. Pages can redirect to the frame that should contain them—useful when found by search engine. To activate this for each page that will appear within a frame go to Edit > Page Properties > Open in active document frame and Redirect to this frame if necessary.

Developing Sites and Pages 43
To create a framed document:
Framed Document Tool. You'll see the mouse pointer change to a cursor. What you do next determines the initial size and placement of the frame.

44 Developing Sites and Pages
Since frames divide a web page into panes which each display their own HTML document, you need to make sure that each part of the frame is referenced using absolute URLs. This means that when a visitor bookmarks the page on your site, the page within the frame will also be bookmarked. To use Absolute URLs, you will need to set a Site Base URL—the part of the URL common to all pages, e.g. https://www.serif.co.uk/URL/example/ WebPlus will use this to create the rest of the URL.
Layout guides are visual guide lines that help you position layout elements, either "by eye" or with snapping turned on. When the snapping feature is turned on, objects you create, move, or resize will jump to align with nearby, visible layout guides. WebPlus provides a variety of layout guides to assist you: page margins, row/column guides and ruler guides.
Unlike frame margins and columns, these layout guides don't
control where frame text flows. Rather, they serve as visual aids that help you match your frame layout to the desired column layout. Usually the frame column width matches the underlying page column guides, but sometimes (for example in multiple- column layouts) the frame column will take up two, or even three, of the page columns.

Developing Sites and Pages 45
To define layout guides:
button on the Page context toolbar.
The Margins tab lets you set guide lines for page margins, rows, and columns. You can set the left, right, top, and bottom margins individually. The dialog also provides options for balanced margins (left matching right, top matching bottom).
Use the Row and Column Guides section to define guides for rows and columns with an optional in-between gutter (gap). If you want rows or columns of uneven width, first place them at fixed intervals, then later drag on the guides to reposition them as required.
The Guides tab lets you fine-position ruler guides by specifying absolute pixel positioning (guides can also be dragged onto the page from WebPlus rulers; see Creating ruler guides on p. 47).
To show or hide layout guides you've defined:
This setting also affects any ruler guides you've placed on the page area.
The WebPlus rulers mimic the paste-up artist's T-square, and serve several purposes:
The actual interval size of the ruler marks depends on the current zoom percentage. In zoomed-out view, for example at 50%, there's less distance between ruler marks than when zoomed-in to 150%. To handle work where you want finer control or smaller snapping increments, click a zoom button to magnify the page.

46 Developing Sites and Pages
By default, the horizontal ruler lies along the top of the WebPlus window and the vertical ruler along the left edge. The default ruler intersection is the top- left corner of the pasteboard area. The default zero point is the top-left corner of the page area, but this can be changed.

To define a new zero point:
To move the rulers:
Adjusting rulers

Developing Sites and Pages 47
To restore the original ruler position and zero point:
To lock the rulers and prevent them from being moved:
The most obvious role for rulers is as a measuring tool. As you move the mouse pointer, small lines along each ruler display the current horizontal and vertical cursor position. When you click to select an object, blue ruler regions indicate the object's left, right, top, and bottom edges. Each region has a zero point relative to the object's upper left corner, so you can see the object's dimensions at a glance.

WebPlus lets you to set up horizontal and vertical ruler guides—non-printing red lines you can use to align headlines, pictures, and other layout elements.

48 Developing Sites and Pages

Guides can be manipulated in the following ways:
button on the Page context toolbar and select the Guides tab. You can use the tab to create or delete individual guides. To delete all ruler guides at once, click the Remove All button.

Developing Sites and Pages 49
Guides are normally "sticky" in that objects snapped to them will be moved when the guide is moved across/down the page. Objects stuck to guides can be unstuck individually at any time or the whole feature can be switched off if necessary.
To make individual objects "non-sticky":
) as you hover over the sticky guide marker.


click red marker to make non-
markers become non-sticky and
You can make the object stick to a guide again by offering it up to
the guide line.
To turn sticky guides on and off:
Previously stuck objects will remain sticky even after sticky guides are switched off—you'll have to make them non-sticky manually.
The dot grid is a matrix of dots or lines based on ruler units, covering the page and pasteboard areas. Like ruler guides, it's handy for both visual alignment and snapping.
sticky · change to black

50 Developing Sites and Pages
To turn the dot grid on and off:
You can also set the grid spacing, style, and colour via the Options dialog.
The Studio's Theme Graphics tab provides a wide selection of ready-made themed objects, which you can add to your pages with a single click. (Or you can use a dialog if you prefer.) Theme graphics range from static "design elements" like bullets to hyperlinked "navigation elements" like Previous/Next buttons and navigation bars pre-programmed to adapt to the site structure you've defined. Theme graphics behave as single objects, with built-in responses to being resized, rolled over with the mouse on a Web page, and so on. Where applicable, you can edit the text or other properties of a theme graphic once it's been added to a page. Once you've added theme graphics to your site, you can instantly update any or all of them to use a different theme.
Using the Theme Graphics tab, you can view and select theme graphics in two ways: by type or by set. A "type" is a particular category of design element— for example, bullets and buttons are two different types. A "set" is a collection of elements using the same visual theme, with one element of each type and a descriptive name for the visual theme—such as Bright, Candy, Clean, etc. For example:

For a consistent appearance throughout your site, choose theme graphics from a single set. Then if you decide to go for a different "look" later on,

Developing Sites and Pages 51
simply click a different set on the Theme Graphics tab to instantly update all your theme graphics.
To add a theme graphic to a page:
2. In the Categories tree, select a category to browse. Click Current Site to view theme graphics already in use, for example if you want to add an element again. OR Expand the Sets or Types list, and then select a category to view its gallery. OR With "Theme Graphics" selected as a category, click the Current Site, View Sets, or View Types thumbnail in the lower Theme Graphics section. Then click the thumbnail for the type or set you want to browse.
Insert Theme Graphic button on the Tools toolbar's Navigation flyout.
In the Theme Graphics gallery, clicking a thumbnail triggers the
default action. You can right-click the thumbnail or click its down arrow to view a popup menu with other actions Insert, Replace in Selection, or Replace in Site.
Once you've added theme graphics to your site, you can update any or all of them to use a different theme.

52 Developing Sites and Pages
To update theme graphics to use a different theme:
Each chosen theme will adopt the currently set colour scheme for
your WebPlus project. You can change your colour scheme at any time, which will alter the appearance of your themed graphics.
To move or resize a theme graphic:
You can edit the text of individual theme graphics, and set various properties for a single theme graphic, or for all theme graphics of a particular type or set.
To edit one or more theme graphics:
Edit button.

Developing Sites and Pages 53
The Gallery tab serves as a container for storing your own design objects (such as Flash banners, text blocks, tables, unlinked text frames or HTML fragments) you'd like to reuse in the same or different Web sites. Once you've copied a design to the Gallery, it becomes available to any Web site—simply open the Gallery!
Additionally, the tab includes categorized pre-designed elements that you can customize and use as a starting point for your own designs (you'll get even more design categories and elements if you purchase and install the WebPlus X2 Resource CD).
To view the Gallery tab:
The Gallery has two parts: (1) an upper Categories drop-down menu and (2) a lower Designs window showing a list of thumbnails representing the designs in the selected category. You can adopt a design by dragging the thumbnail onto the page.

54 Developing Sites and Pages

The Gallery tab also lets you store your own designs under My Designs (or in a user-defined category) if you would like to reuse them—the design is made available in any WebPlus project. You can add and delete any items stored in My Designs or one of its categories, with the option of naming elements to facilitate rapid retrieval by searching.
Designs cannot be added to any pre-defined category.
To use a design from the Gallery:
To view your Gallery:
To add, delete, or rename My Design categories:
Tab Menu button and choose Add category..., Delete category, or Rename category... from the flyout menu.
If adding a category, you need to name the category in a dialog. For removal or deletion, simply pick the category in advance of picking the option.

Developing Sites and Pages 55
All designs in a deleted category will also be lost.
To move or copy an object into the Gallery:
Tab Menu button and check the option), you'll be prompted to type a name for the design. (You can name or rename the design later, if you wish.) By default, unnamed designs are labelled as "Unnamed."
To delete a design from the Gallery:
Site properties allow settings to be made which will be applied across the entire Web site. Page settings, HTML output control, search engine optimization, author/copyright , and Web usage statistical information can all be set via the multi-tab Site Properties dialog. Generally speaking, decide on your Site property settings when you are planning your Web site—once set, the settings do not normally need to be modified (although you can at any time).
Some site properties such as page and search-engine optimization settings are also mirrored on individual pages (via Page Properties; see p. 64). This lets you override or complement the "global" Site Properties, respectively, and apply "local" settings to specific pages.
To view or change site property settings:

56 Developing Sites and Pages
The dialog is arranged into separate tabs, with each tab reflecting an aspect of site properties.
Options Default file extension The default extension for published pages is .HTML. Some Web servers require you to use a different extension.
Default page alignment WebPlus lets you set a default width and height for Web pages.
Force absolute text size By default, text on your published Web pages will vary in size depending on the visitor's browser setting. You can override this, forcing text to appear at the same point sizes used in your layouts.
Default Page Size Default Width and Height settings determine the dimensions of new master pages.
HTML Output Control how your web pages are output by choosing from different encoding methods and controlling how HTML IDs are generated.
Search Search engine descriptors Include optional descriptive information and keywords for your site.
Search Engine Sitemaps and robots Informs search engines or robots if they can crawl, analyze and index Web pages in your Web site. A Sitemap file will include Web pages to be indexed whereas a Robots meta tag (or a robots.txt file) controls which pages are to be excluded from indexing.
Tab Property

Developing Sites and Pages 57
Identification Author/copyright Add details on ownership, legal notices (copyright statement) and publication dates as Meta Tags to your site's page headers.
Graphics Global image export options WebPlus applies default settings when exporting graphics.
Favourites Favourites Set an icon file (a graphic) for the Web site which will show when a web visitor bookmarks your Web site.
Properties and statistics View and change information for the current project file.
Site Analytics Web page statistics Enable, then create and assign a Web Analytics profile which collects and displays Web statistics.
Site Base URL Absolute URLs Defines the full URL address. This is a requirement for search engine optimization with sitemaps or RSS feeds.
Default site property settings for Width and Height determine the dimensions of master pages, and each master page in turn determines the size of pages that use it. A default site property setting for alignment (either Left or Centered) determines how page content lines up in a browser.
One of the first things you may want to do, when creating a new site from scratch, is to check the default dimensions and adjust them if necessary. You can also override the site setting for a given master page as needed. Individual pages that don't use a master page (for example, HTML pages you've imported) can have their own dimensions.
Summary/ Statistics

58 Developing Sites and Pages
You can adjust the dimension settings at any time—but as a rule, make changes before you've gone too far with laying out page elements!
In general, use a Width setting that will fit on a standard monitor (750 pixels is usually safe) and won't force users to scroll horizontally.
As for Height, allow enough vertical distance to let you lay out the objects on your longest page. It's OK to allow more space than you expect to fill. As each individual page is published to the Web, WebPlus will truncate the page either at the specified Height setting or just below the bottom element on each page/master page, whichever is less. In other words, there's no danger of blank space below your bottom element—but don't let elements run outside the indicated page dimensions.
WebPlus lets you select one or more master page objects, and make them Attach to Bottom of Page (set in Arrange menu). This means that objects which should belong to the base of the page such as copyright information, bottom navbars, or navigation buttons will always show on the bottom of the web page irrespective of page height.
To set the site-wide page dimension settings:
You can also change the default page alignment setting as a site property, or override it for a given page.
To set the site-wide page alignment setting:
For page dimension and alignment, you can override the site setting for a particular master page or normal page, as described in Setting page properties on p. 64.

Developing Sites and Pages 59
WebPlus maintains basic properties and statistics for each project file.
To view or change project properties:
For tracking version history, especially if layout work is being shared, you may wish to display current properties so they show up on the screen or on a printout. Properties you can insert include Site title, Filename, Author, Last Edit Time, Revision Count, and Page Count.
To insert project information in your text:
If the project information changes, the information field in the text is automatically updated.

60 Developing Sites and Pages
The favourites feature is used to include a graphical portrayal of your Web site, a company logo, or other distinguishable symbol, to precede any bookmark stored in a web visitor's browser favourites.
An .ICO file must have been previously created to represent your site.
To create a favourites icon for your site:
For HTML output, it is possible to set a language-specific site-wide encoding type, remove spacing from resource file names, let your browser choose to line break after hyphens, and control the generation of HTML IDs for various objects.
To set the encoding type:
It may be necessary to export files (e.g., pictures, movies, JavaScript files) without spaces in their file names (your ISP may not support the upload of files with spaces present). By default, spaces are honoured but you can remove spaces for resource files if necessary.

Developing Sites and Pages 61
To remove spaces from resource files or make file names lower case:
To allow a browser to insert a line break after any hyphen, WebPlus can optionally export a Word Break tag after each hyphen instance. If this isn't a requirement, you can export text containing just the hyphen (without the trailing tag)—this removes a source of HTML validation failures (since WBR tags are a Microsoft extension) but text with hyphenated words may overlap its frame boundaries.
To switch off exporting word break tags:
For advanced object manipulation (e.g., by scripting) you can control whether automatic HTML ID generation for object, text column, table row or cell takes place or not.
To manage HTML ID generation
Site Analytics, involving the gathering and presentation of Web page statistics, can be enabled for your Web site over a set time period, i.e. over one or more months (or even years!). This lets you assess whether the Web site meets its original objectives and perhaps the success of a Web site launch (re-launch). Either way, statistics let you make choices about how to improve your Web site.
Site Analytics can be presented in various categories. In particular:

62 Developing Sites and Pages

In addition, you can view your top five visitors, landing or exit pages (first/last page that a web visitor arrives at/leaves). Top five visitors show the visitor's IP address or, where possible, the visitor's computer host name.
Web statistics are enabled via Site Properties by linking to a profile specifically created for the Web site. Generated statistics can then be accessed in an Analytics Smart Object either via WebPlus's Smart Object Tool (Web Objects toolbar) or via the serifwebresources.com Web site (at any time).
Use the Site Visits bar chart to indicate web server outage—days
with no site visits may indicate server unavailability.

Developing Sites and Pages 63
To enable Web page statistics:
To view Web statistics:
Smart Object Tool button on the Web Objects toolbar and login.
button under the object preview.
Normally, there's no real need to declare your Web site's root URL from within WebPlus. However, some exceptions include:

64 Developing Sites and Pages
To set an absolute URL:
Hyperlinks can be made absolute hyperlinks by checking the
Absolute URL option for a Site page, file, anchor, or navigation element. If the Site Base URL is not already set, you'll be prompted to declare the URL when publishing.
Don't enter a URL with a subfolder or page name appended to the
base Web address.
Your WebPlus site has its own general framework, consisting of the site itself; one or more master pages; and a number of individual pages. Each aspect of the framework has various property settings that contribute to the look and behaviour or your site when it's published. Whether you start with a WebPlus template or from scratch, you can choose whether to stick with the default property settings or alter them to suit your needs.
Page properties of individual pages can be viewed either via the Site tab, by right-clicking on the active page in your workspace, or via the Site Manager. The Site Manager offers a more powerful method of not just viewing but modifying the properties of multiple pages at the same time—simply check you chosen pages and alter one or more page properties. All checked pages will adopt the new settings.
To view master page property settings:
Master Page Manager button above the Master Pages window on the Site tab. The Master Page Manager appears.

Developing Sites and Pages 65
To view normal Web page property settings:
The Page Properties dialog appears.
Page Page and file name Each page has a "visible" page title or file name shown in Site tab's Site Structure tree. Use the Page Properties dialog (Page tab) to change the page name, specify a different HTML title, and/or change the file name.
Include in navigation By default, all pages are included in navigation (they can be linked to by navigation elements like navbars).
Page alignment Alignment determines how the page content appears in a browser. Use the Site's default page alignment setting (Use Site setting), or choose Left or Centered as an override.
Master page Use to assign a specific master page to a specific page, or set a page to use no master page.
Width and Height Each master page determines the size of pages that use it. In the Master Page Manager (Properties button), you can override the site setting for a given master page. For individual pages that don't use a master page you can set custom page dimensions. For pages using a master page, only the Height can be set.
Tab name Property

66 Developing Sites and Pages
Active document frame Pages can be opened in an active document frame if the frame has been created previously.
Background Background sound Choose a sound to load and play automatically when a specific page is first displayed.
Background Background colour/picture/On-page colour Sets a custom colour/picture for off-page background and a colour for on-page background. Use for pages that don't use a master page. When using master pages, adjunct scheme settings are applied by default.
Search Search engine descriptors Include optional descriptive information and keywords on individual pages, which override the site's search engine settings.
Search Engine Sitemaps and robots Informs search engines or robots if they can crawl, analyze and index the current page. A Sitemap file will include the current page in indexing whereas a Robots meta tag (or a robots.txt file) will exclude the page. These settings override the site's search engine settings.
Page Security Page Security Apply access control to your Web page(s) by assigning to a user list or user group (via Serif Web Resources Access Control Smart object).
Redirect Redirect After a configurable time interval a web page is redirected to a new hyperlink destination (another page, image, email, etc.).
Page Transitions Page Transitions
Page entry and exit transitions can be applied as you navigate from one web page to another.

Developing Sites and Pages 67
The Site Manager lets you view and apply properties to individual or multiple Web Pages. You can set Include pages in navigation, assign master pages, set page alignment and size, rename pages, set a background/on-page colour, add sounds, optimize pages for search engines, and apply redirections, transitions, or access control. Master pages can also have their page size, background and page transitions managed via Site Manager.
To view Page/Master page properties via Site Manager:
Site Manager button on the Hintline at the bottom of your workspace, then choose Page or Master Page Properties as a menu option.
Alternatively, click the

68 Developing Sites and Pages
WebPlus's Site Manager hosts a whole range of useful site-wide information available from a single menu-driven dialog. The tool lets you view Page/Master Page Properties, and pick from a selection of Management tools for viewing and editing hyperlinks (see below), resources, text, fonts, and more.

Powerful features of Site Manager include:
While most management tools are beneficial at any point in Web site development, the management of resources and text, as well as use of the Site Checker, are essential for checking your Web site just prior to Web publishing.

Developing Sites and Pages 69
To launch Site Manager:
Site Manager button on the Hintline at the bottom of your workspace. OR
button on the Pages context toolbar. OR Select Site Manager from the Tools menu, and choose a manager type from the submenu (e.g. Resource Manager). This opens Site Manager with the chosen Manager displayed automatically.
A quick summary gives an indication of what each management feature can do for you.
Let's you...
Include pages in navigation, assign master pages, set page alignment and size, rename pages, set a background, add sounds, optimize pages for search engines, and apply redirections, transitions, or access control.
Hyperlink View and edit hyperlinks, jump to hyperlinks on the page, find and replace destination links.
Resources View images, media, links, HTML code resources, scripts, or applets in your site. Jump to each resource on the page, swap between linked/embedded image status, replace or resample images.
Text View and edit text (in WritePlus), name stories, reformat text, apply styles, convert creative frames and tables to HTML-compatible text.
Font View fonts and their availability, jump to fonts on the page, and substitute fonts.
E-Commerce View E-Commerce objects on pages across your Web
Click the · Type of Management · Page/Master Page Properties

70 Developing Sites and Pages
site.
Anchor View and edit anchors, jump to anchors, find and replace anchor links.
File Display the Web site structure with page file names rather than page names.
Site checker Display common layout problems discovered in your Web site.
Access control lets you apply security across your Web site or, more typically, to specific pages which may host confidential information. How you apply access control to pages is dependent on the complexity and nature of your Web site—simple Web sites can usually adopt a basic level of access control, whereas larger multi-purpose Web sites might use more advanced access control. Each method can be further described as follows:

Developing Sites and Pages 71
The subject of access control can be a little daunting so the following illustration helps to show the relationships between users, Web pages, user lists, and user groups.

Advanced access control is carried out via Serif Web Resources by using a Smart object, called Access Control, which can be created to manage user groups and users, and to optionally insert a user login onto your page for user sign in (after self-registration sign up).
As a brief reminder, Serif Web Resources is a secure online service hosted by Serif that securely stores adopted Smart objects (see p. 306) and any generated data. You can manage your Access Control Smart object, as any other Smart object, via www.serifwebresources.com at any time.
The simplest form of access control within WebPlus is page-level access controlled via configurable user lists. Typically of use in personal Web sites or small enterprise Web sites, you can allow free access to most of your site, with only a limited set of pages accessible to selected Web visitors. For example, a

72 Developing Sites and Pages
Photo Gallery page of your family can be made "private" but still be shared with your relatives (under password control).
User lists can be created at the same time as setting your page security. Simply enable access control for the page then create a new user list, adding a username and password to the list. The username/password combination will be used by the Web visitor to login and allow access to the Web page.
Two approaches can be taken when setting up username and passwords. If you don't need to control visitors to your page you can set up a single username and password—everyone uses the same login. However, if your page is to be made accessible to a known group of people, e.g. a membership list, it makes sense to allocate a username and password to each individual. As members join or leave the member's login details can be added or removed without affecting existing members.
For known users, consider using email addresses as user names
for better traceability.
This form of access control does not involve the Access Control
Smart object and associated groups, a more advanced method of access control intended for controlling access to "zones" with optional user sign up (see Advanced access control below).
To enable basic access control:
button on the Pages context toolbar. OR Right-click the page in the Site tab, and choose Page Properties..., then select the Page Security tab.

Developing Sites and Pages 73


Your page's Page Security tab should show that the page is password protected and that a user list (storing user login details) has been assigned.
To edit a user list:

74 Developing Sites and Pages
Uncheck Protect page with password if you want to set up user
lists without protecting the current page.
Advanced access control is intended for more complex Web security scenarios where one set of Web pages belong to one user group, with another set of pages belonging to another. Each user group is then associated with a group of users—all with the same permission to access that group's set of pages. By establishing a range of user groups which reflect the distinct areas in your site, you have versatile control over visitor access. For example, a medium-sized business Web site can be set up to have separate password protection on pages for personnel information, VPN access, internal telephone lists, software downloads, etc.
Even more powerful is the ability to use a common login/logout input box throughout your site, typically by adding to your master page. This means that any user can get access to any restricted pages by signing up, then logging on to the site.
The enabling of advanced access control is carried out via login to Serif Web Resources (see p. 306). By default, an Access Control Smart object for the Web site can be created which can be used to create new user groups and users (and manage them subsequently). You'll also have the option of adding the object onto the page for automatic user sign in (see User sign in).
To enable advanced access control:
Smart Object Tool button on the Web Objects toolbar.

Developing Sites and Pages 75
To create a user group:
Smart Object Tool button on the Web Objects toolbar.


76 Developing Sites and Pages
group has to be manually populated with the user's email (the Web Manager will need to know user email addresses in advance).
To manage a user group:
From the dialog, you can rename, link to an existing forum/blog, enable user sign up to groups, and automatically login to pages hosting forums. Number and names of group users are also displayed. Make changes by clicking the Update Group button, or remove the group with the Delete Group button.
For each user group that is created, a group of users can be added to each user group by manual entry (by Web manager), import from a comma-delimited text file (again by Web Manager) or automatically by user sign up. All options are possible when managing the Access Control Smart object.
It's your choice which of the above methods you use. Typically manual user control is great for controlled environments such as small businesses, organizations, or clubs where users are "known". Conversely, user sign in is

Developing Sites and Pages 77
intended for more public access where controlling users is impractical— instead user sign up (self-registration) is used, with the option to manage users within their groups via the Access Control Smart object.
You can add more than one user to the same user group. The
same user can belong to multiple user groups.
Any user can be deleted whether the user belongs to a group or not. A user can also be temporarily suspended for breaking site rules (e.g., for posting defamatory statements on a hosted public forums). The next time the user tries to log on the message "Your account has been suspended" is displayed.
If more drastic action is required, a user's IP address can be banned from accessing Serif Web Resource objects (e.g., forums, etc.). As a last resort, even the ISP or organization to which the owner of the email address belongs to can be banned from access. This latter option is not recommended normally but may be necessary to prevent institutional malpractice such as professional spamming.
To add a user manually:
Smart Object Tool button on the Web Objects toolbar.

The user is added to the User Group Management's Users field.

78 Developing Sites and Pages
To import a user list from a text file:
To import a user list from a mailing list:
To delete a user:
To suspend a user:

Developing Sites and Pages 79
Suspended users will be shown with an asterisk in the Manage
Access Control dialog's user groups.
To ban a user(s):
To allow banning to take place, the user must have been logged
onto Serif Web Resources previously.
If a user's IP address, ISP or Organization is currently banned, it will appear in an Unban drop-down list. This lets you review current bans. Of course, banning may be reversed if a particular IP address or network is no longer considered suspect.
To unban a user(s):

80 Developing Sites and Pages

A user login box can be added to the page to allow registered users to Sign in to all groups that are "sign up enabled", otherwise restricted pages will be protected.
A new visitor to the site can sign up to become a registered user (click the Sign up link).
Add the login box to the Web site's master page. Any Web page
will then offer the user the opportunity to sign up to the site.
To add a user login for sign up:
Paste cursor where you want the user login box, then click the mouse to insert the object at a default size.
As users are signing up by themselves you don't need to manually add users in the Add New Users section (although you can still add manually; see To add a user manually p. 77). When users sign up they will appear automatically in every user group which is "user sign up enabled."

Developing Sites and Pages 81
To sign up as a registered user:
If you've not been emailed your activation link check your Junk,
Trash, Bulk, or equivalent mail folder. Your email may have been incorrectly treated as a "spammed" message and therefore deleted.
Once logged into the site, you can revisit the login area on your page to Change screen name, Change Password, or simply log out. The screen name is the name other users see when the user makes public postings on forums or blogs.
Indexing involves the automatic collection of information about your Web pages by search engines such as Google, Yahoo!, Live Search, and many more. By "harvesting" this information at the search engine, search engine users can make use of this indexed information to obtain quick and accurate site search results which match the search criteria entered by the user.
By default, the contents of each published Web page (especially heading text) will be indexed. However, in an Internet world of billions of Web pages all being constantly indexed, Web developers can optimize this indexing process to allow a Web site's pages to appear higher in a user's search results.

82 Developing Sites and Pages
Optimization of Web pages for search engines is possible in several ways:

Whether you are using Meta tags, robots, or sitemaps independently or in combination, WebPlus makes configuration simple. As these settings can be established or modified for the whole site (Site Properties; Search Engine tab) any newly created page will adopt site's search engine settings. If you change the site settings, all Web pages will update to the new settings automatically. However, you can override the site's settings on a specific Web page (Page Properties; Search Engine tab) at any time. The page's override means that subsequent changes to site settings will always be ignored.

Developing Sites and Pages 83
Although they're optional, if you want to increase the likelihood that your Web site will be "noticed" by major Web search services, you should enter Meta Tag search engine descriptors. Search services maintain catalogues of Web pages, often compiled through the use of "crawlers" or other programs that prowl the Web collecting data on sites and their content. By including descriptive information and keywords, you'll assist these engines in properly categorizing your site. You can enter descriptors for the site as a whole and/or for individual pages. For example, for a simple ornithological web site you could have the following descriptors, reflecting the content of your site or page, e.g.
Egret and Heron species
Cattle Egret, Blue Heron, Green-backed
It's a good idea to plan which descriptors are used for the site and pages. If set, a site's descriptors will complement page-specific descriptors.
To enter search engine descriptors:

84 Developing Sites and Pages
A robots meta tag can be used by search engine robots to control how they access the Web site or page. The whole Web site (and pages) can be set to be indexed/not indexed, page hyperlinks followed/not followed, or any combination thereof. Site-wide settings are made by checking Index pages on this site and Follow links from pages or as overrides on specific page properties.
To enable robot Meta Tag generation:

Developing Sites and Pages 85
The objective of this method is the same as that for using a robots meta tag, but instead a robots.txt file is created and no robots meta tag is included in Web pages. The robots.txt file is stored in the Web site's root folder and can be viewed in any text editor to verify the excluded pages and folders.
To enable a robots.txt file:
So far we've looked primarily at methods of excluding Web pages from indexing. Without these controls, Web pages will be indexed by discovering page hyperlinks and crawling through them, harvesting keywords, descriptions, and page text to be indexed. However, this process may not be efficient as there may be a limited number of inter-page hyperlinks present throughout your site. As a result, a search engine sitemap file (sitemap.xml) can be created to act as a local lookup for crawlers to begin investigating your site. The file simply lists pages in your Web site that you've decided can be indexed. The file also indicates to search engines when pages have been modified, informs when the search engine should check the page and how "important" pages are in relation to each other.
The Sitemap method is especially good for "advertising" your Web site pages—with a greater likelihood of your pages appearing high in a user's search results.

86 Developing Sites and Pages
Just like the robots file, the setting of site and page properties creates the sitemap file (this is published with your Web site); the file is stored in the root Web folder (perhaps alongside a robots.txt file).
One requirement of using search engine sitemaps is the need to
declare an absolute URL. This allows the proper URL address (e.g., www.helloworld.com) to be indexed, allowing search engine users to link through to your site from their search results.
To enable search engine sitemaps:

Developing Sites and Pages 87
It is possible to assign paragraphs (or text styles) in your HTML frame or HTML table with a preferred HTML tags (H1, H2, .., to H6) for export. The tags can be assigned from Paragraph... on the Text menu (choose the Paragraph>HTML option); simply pick a preferred HTML tag for your paragraph from the drop-down menu. An advantage of this is that paragraphs assigned such tags take priority over other "body" tags (e.g., those using the tag) when appearing in search engine results (the H1 tag is the highest priority).
WebPlus uses a powerful search facility which matches user search terms with text that appears in your Web site in artistic text, and HTML or creative text frames or tables. This makes it easy to retrieve content from any hosted Web pages.
The search feature works by using the Site Search Tool and Site Search Results Tool, both hosted on the Web Objects toolbar's Search flyout. Each tool is used to create objects that work together in combination.
Site Search object—the text box in which users type the word or phrase they want to search for. This text box is usually added to a master page and appears on all pages of the site.

Site Search Results object— creates a window in which the search results are displayed. Typically, this is placed and sized onto its own page, and does not appear in the site navigation structure.

88 Developing Sites and Pages
As an example, the search term "vitae" could retrieve search results showing Web pages which contain the search term. The user clicks the Search button to initiate any search.

The search results show a hyperlinked page name heading plus associated Web page text for reference. Simply click the hyperlink to access the Web page.
With respect to security, all Web pages will be searchable by default. However, password-protected pages will always be excluded from search results. See Access Control on p. 70 for more information on password protection.
To add the Site Search object:
Site Search Tool on the Web Objects toolbar's Search flyout.
place cursor to a chosen position and click to place your Site Search object. Your search object appears on the page.
Add the search object to the top of your master page to allow site-
wide access to the search feature.
Site search is useless without some means of displaying the search results to the user. This is possible by using the Site Search Results object which, like the Site Search object, can be placed on a Web page under a place cursor. However, the object is typically resized to full page size before placement

Developing Sites and Pages 89
(it needs to display multiple Web page hits consecutively). It also makes sense to keep the search results on a separate, perhaps new, page which can also have its own look and feel (double-click the object to alter page appearance).
To add Site Search Results to a new page:
Add drop-down list, click New Blank Page.
Site Search Results Tool on the Web Objects toolbar's Search flyout.
place cursor to a chosen position, then click and drag to place your search results window.

90 Developing Sites and Pages


92 Working with Text

Working with Text 93
Typically, text in WebPlus goes into text frames, which work equally well as containers for single words, standalone paragraphs, or multipage articles or chapter text. You can also use artistic text for standalone text with special effects, or table text (see Creating text-based tables on p. 127) for row-and- column displays.
A text frame is effectively a mini-page, with:
The text in a frame is called a story.
Frames can be linked so that a single story continues from one frame to another. But text frames can just as easily stand alone. Thus in any Web site, you can create text in a single frame, spread a story over several frames, and/or include many independent frame sequences, e.g.

94 Working with Text

When you select a frame you'll see its bounding box (see Frame 1 above), indicated by a grey border line plus corner and edge handles, and (if you clicked with the Pointer Tool) a blinking insertion point in the frame's text. In this mode, you can edit the text with the Pointer Tool. As in a word processor, double-clicking selects a word, and triple-clicking selects a paragraph.
Two types of frame can be added to the WebPlus page—the HTML text frame and the Creative text frame. These can be compared easily in the following table.
Searchable by search engines (Google, etc.) 9 8
Script insertion for generating dynamic content
Margins and column guides 8 9
Breaks (column, page, and frame) 8 9
Resize/move frame 9 9
Crop frame 8 9
HTML frames · Creative · frames

Working with Text 95
Rotate frame 8 91
Frame linking 8 9
Export as text 9 92
Copy and paste exported text 9 9
Solid fill and line colour 9 9
Gradient and bitmap fill 8 9
HTML-compliant Styles 9 8
Transparency 8 91
Borders 8 91
Warp 8 91
2D/3D Filter Effects 8 91
Instant 3D 8 91
1 If applied, will export frame as a graphic.
2 Only if rotate, crop, transparency, a border or a filter effect is not applied.
The above table relates to the frame as an object, and not to text contained within. See for more information on frame text properties.
So how do you tell the difference between an HTML and Creative frame? Simply, HTML frames will always possess dark blue corner/edge handles when selected, while a Creative frame's handles will show as grey.
To select only the frame (no insertion point):
Columns 8 9

96 Working with Text
To move a text frame:
options in the Transform tab.
To resize a text frame:
options in the Transform tab.
You add frames to a page as you would any other object. You can resize any frame, but cannot alter its basic shape.
To create a frame:
Creative Frame Tool button from the Text Frames flyout on the Standard Objects toolbar.
HTML Frame Tool or the
You can use the Update Object Default from the Format menu
to set properties for future new frames you create. See Updating and saving defaults on p. 156.
To delete a frame:
You can put text into an HTML or Creative frame in one of several ways. For HTML frames, text will be converted to compliant HTML code.
or · or

Working with Text 97
WritePlus story editor:
To start WritePlus, right-click on a frame and choose Edit Story (shortcut Ctrl+E). OR
WritePlus button on the Frame context toolbar.
This opens the WebPlus integrated story editoruseful for typing, formatting, and proofing large amounts of text. If the frame already contains text, it is automatically loaded into WritePlus for editing.
Importing text: Right-click on a frame and choose Text File... (shortcut Ctrl+T) to import text.
Typing into the frame:
Select the Pointer Tool, then click for an insertion point to type text straight into a frame, or edit existing text. (See Editing text on the page on p. 108.)
Pasting via the Clipboard:
Select the Pointer Tool and click for an insertion point in the text, then press Ctrl+V.
Drag and drop: Select text (e.g. in a word processor file), then drag it onto the WebPlus page. If you drop onto a selected a frame, the text is pasted inline after existing text. Otherwise, a new frame is created for the text.
The frame layout of a Creative frame controls how text will flow in the frame. The frame can contain multiple columns. When a frame is selected (and Frame Edges is switched on in the View menu), its column margins appear as dashed grey guide lines when values for column blinds and margins are defined.
Click the

98 Working with Text
You can drag the column guides or use a dialog to adjust the top and bottom column blinds and the left and right column margins.

To edit frame properties directly:



(1) (2) (3)
The illustration shows how the cursor will change when hovering over the bounding box (1), after dragging inwards the column margin can be adjusted (2), and after dragging downwards, the top margin blind can be moved (3).
To edit frame properties using a dialog:
Frame Setup button on the Frame context toolbar.

Working with Text 99
Stories cannot flow between HTML frames, as they do not support
linking (text can only overflow a single frame).
You can have just one Creative frame on its own, or you can have many frames. Frames can be connected in linked sequences so that the story associated with a given frame sequence flows through the first frame on to the next and keeps flowing into frames in the link sequence.
A key difference from a word processor is that WebPlus does not normally add or remove frames according to the amount of text. The text simply flows until the text runs out (and some frames are left empty), or the frames run out (and some text is left over).
If the text runs out before the last frame, you'll have some empty frames. These frames will be filled with text if you add more text to the story, or if you increase the size of the story text.
WebPlus keeps track of multiple linked frame sequences, and lets you flow several stories in the same site. The Site Manager's Text menu item (accessed via the Tools menu) provides an overview of all stories and lets you choose which one you want to edit.
When importing text, it's a good idea to take advantage of the AutoFlow feature, which will automatically create text frames and pages until all the text has been imported. This way, enough frames are created to display the whole story. Then you can gauge just how much adjustment will be needed to fit the story to the available "real estate" in your site. You can make the major changes first, then proceed to the fine-tuning.

100 Working with Text
To AutoFlow story text on the page:
AutoFlow button just to the left of the frame's Link button (showing
.)
WebPlus creates additional pages and frames as needed to accommodate the story text.
If there's too much story text to fit in a frame sequence, WebPlus stores it in an invisible overflow area and the Link button on the last frame of the sequence displays
; an AutoFlow button appears next to the Link button. You might edit the story down or make more room for it by adding an extra frame or two to the sequence. Clicking the AutoFlow button adds additional frames and pages as needed.
The Frame context toolbar includes several tools that can simplify the task of fitting text to frames:
Click to scale the story's text size so it fits exactly into the available frames. You can use this early on, to gauge how the story fits, or near the end, to apply the finishing touch. AutoFit first applies small point size changes, then small leading changes, then adjustments to the paragraph space below value, until the text fits. Other settings are not affected. (Also see Note below.) Tip: You can also press Ctrl+Alt+X to apply AutoFit.
Click to increase the story's text size one increment. Click for a bigger increase.
Click to reduce the story's text size one increment. Click for a greater reduction.
AutoFit · Enlarge Story Text · Shrink Story Text

Working with Text 101
When selected, a text frame includes a Link button at the bottom right which allows you to import text files or control how the frame's story flows to following frames. The icon inside each frame's Link button denotes the state of the frame and its story text:
The frame is not linked to a following frame (it's either a standalone frame or the last frame in a sequence) and the end of the story text is visible.
The frame is not linked (either standalone or last frame) and there is additional story text in the overflow area.
The frame is linked to a following frame. The end of the story text may be visible, or it may flow into the following frame. Note: The button icon will be red if the final frame of the sequence is overflowing, or green if there's no overflow.
There are two basic ways to set up a linked sequence of frames:
When frames are created by the AutoFlow option when importing
text, they are automatically linked in sequence.
To create a link or reorder the links between existing frames, you can use the Link button or the controls on the Frame context toolbar. Remember to watch the cursor, which changes to indicate these operations.
No Overflow · Overflow · Continued

102 Working with Text
To link the selected frame to another frame as the next frame:
Select the frame, then click the
Link Frame button on the Frame context toolbar.
To unlink the selected frame from the sequence:
Unlink Frame button on the Frame context toolbar. OR Click on the frame's Link button, then click with the Textflow cursor on the same frame.
Story text remains with the "old" frames. For example, if you detach the second frame of a three-frame sequence, the story text remains in the first and third frames, which are now linked into a two-frame story. The detached frame is always empty.
If you click on a frame's Link button, and then change your mind
about linking or unlinking, press the Esc key or click on a blank area of the page or pasteboard to cancel.
To navigate from frame to frame:
Next Frame button on the Frame context toolbar.
Like graphics, all frames have line and fill properties initially an outline of zero weight and a clear fill. Although HTML frames cannot possess transparency, Creative frames can (initially set to None). As with graphics, you can edit these properties, for example adding a grey or light-coloured fill as shading behind a frame's text. You can also import images inline with frame text.
Previous Frame or

Working with Text 103
As HTML frames have to comply with HTML standards, they are not capable of linking stories (as for Creative frames). As a result, a decision has to be made about what happens in the event of overflowing text. Overflowing HTML frames are clearly indicated—when selected, the Link button at the bottom right of the frame indicates
Overflow.
If you see this, you can choose to leave the text Hidden, let it Overflow, or let all the text be viewable with the help of a scroll bar.
To control overflowing text:
It's always a good idea to preview your HTML frames (via Preview
in Window or via your browser)—especially if Overflow is selected.

104 Working with Text
Artistic text is standalone text you type directly onto a page. Especially useful for headlines, pull quotes, and other special-purpose text, it's easily formatted with the standard text tools.

Here are some similarities between frame text and artistic text. Both text types let you:
And some differences:

Working with Text 105
To create artistic text:
Artistic Text Tool from the Tools toolbar's Text flyout.

Once you've created an artistic text object, you can select, move, resize, delete, and copy it just as you would with a text frame. Solid colours, gradient/bitmap fills and transparency can all be applied.
To resize or reproportion an artistic text object:
To edit artistic text:
Now you can type new text, apply character and paragraph formatting, edit the text in WritePlus, apply proofing options, and so on.
With artistic text, the vertical alignment setting anchors a
particular part of the object—for example, a "top" setting anchors the top line and forces new text to come in below, while a "bottom" setting anchors the bottom (most recent) line and pushes previous lines up as you type new lines.

106 Working with Text
"Ordinary" straight-line artistic text is far from ordinary—but you can extend its creative possibilities even further by flowing it along a curved path. The resulting object has all the properties of artistic text, plus its path is a Bézier curve that you can edit with the Pointer Tool as easily as any other line! In addition, text on a path is editable in some unique ways, as described below.

To apply a preset curved path to text:
Path flyout on the Text context toolbar and choose a preset path.
The text now flows along the specified path.

To add artistic text along an existing line or shape:
Artistic Text Tool from the Tools toolbar's Text flyout.

Working with Text 107
If you don't want text on a path, you can override the cursor
response by holding down the Alt key.

The original line object no longer exists. To recover it, use Undo
at this point.
To fit existing text to an existing line or shape:
To create text and path at the same time:
The Freehand Path Text Tool lets you sketch a curved line in a freeform way.
The Straight Path Text Tool is for drawing a straight line.
The Curved Path Text Tool lets you join a series of line segments (which may be curved or straight) using "connect the dots" mouse clicks.
These three tools work almost exactly like their equivalents on the
Line flyout. To use the first two, simply drag to define a line on the page. The Curved Path Text Tool is a bit more complex (and lets you use the Curve Creation context toolbar to define individual segments).

108 Working with Text
You can use the Pointer Tool to edit frame text, table text, or artistic text directly. On the page, you can select and enter text, set paragraph indents and tab stops, change text properties, apply text styles, and use Find and Replace (see p. 111). For editing longer stories, and for more advanced options, choose WritePlus.
The selection of frame text, artistic text, and table text follows the conventions of the most up-to-date word-processing tools. The selection area is shaded in semi-transparent blue for clear editing.

Double- or triple-click selects a word or paragraph, respectively. You can also make use of the Ctrl-click or drag for selection of non-adjacent words, the Shift key for ranges of text.
To edit text on the page:

Working with Text 109

To start a new paragraph:
To start a new line within the same paragraph (using a "line break" or "soft return"):
The following two options apply only to frame text. You can use these shortcuts or choose the items from the Insert>Break submenu.
To flow text to the next column (Column Break) or frame (Frame Break):
To switch between insert mode and overwrite mode:
To repeat a text action:
For example, if you've applied new formatting to one paragraph, you can click in another paragraph and use the Repeat command to apply the same formatting there.
You can easily copy frame text and paste into the same or a different text frame. Text stored on the clipboard can additionally be pasted into a new frame.
Drag and drop support for frame text allows text to be moved into a different location within the same frame or a different text frame in your site.

110 Working with Text
To copy and paste text:
If you don't place an insertion point, the text can be pasted into a
new text frame directly.
To move text by drag and drop (text frames only):
cursor is shown.
When a text object is selected, markers on the horizontal ruler indicate the left indent, first line indent, and right indent of the current paragraph. You can adjust the markers to set paragraph indents, or use a dialog.


Working with Text 111
For details on setting frame margins, see Frame setup and layout on p. 97.
To set the indents of the current paragraph:
For quick left indents, select the
Decrease Level button to increase or decrease indent, respectively. Indent is by the currently set default tab stop distance. OR To adjust indent settings via a dialog, choose Text>Paragraph... from the Text menu (or Text Format>Paragraph... from the right-click menu). In the Indentation box, you can enter values for Left, Right, 1st Line, or Hanging indents.
WebPlus fully supports Unicode, making it possible to incorporate foreign characters or special symbols.
You can search site text for an extraordinary variety of items: not just words or parts of words, but a host of character and paragraph attributes such as fonts, styles, alignment, bullets and numbering, missing fonts, drop caps
Increase Level or

112 Working with Text
even inline graphics and more! Using the Find and Replace dialog—which remains open without interrupting your work until you click its Close button—you can replace globally, or on a case-by-case basis.
To use Find and Replace:
The Find and Replace dialog also lets you perform a wildcard-type search by using a regular expression—a formula for generating a set of strings—to specify complex search criteria. This is covered in more detail in the WebPlus Help.

Paragraphs

114 Formatting Characters and Paragraphs

Formatting Characters and Paragraphs 115
WebPlus gives you a high degree of control over the fine points of typographic layout, whether you're working with frame text, table text, or artistic text.
To apply basic text formatting:
2. Use buttons on the Text context toolbar to change typeface, point size, font, attributes, paragraph alignment, or level. OR Right-click the text and choose Text Menu>Text Format, then select from the submenu: Character..., Paragraph..., Bullets & Numbering..., or Vertical Alignment. (You can also select these items from the Text menu.) The Text Style dialog (see below) is displayed with the selected menu option shown by default. OR Use the Character tab to adjust point size, spacing (tracking), leading, and language.
By default, text on your published Web pages is set to vary in size depending on the visitor's browser setting. If you wish, you can override this as a global option in WebPlus, so that text will appear in the browser at exactly the same point sizes used in your layouts. To check or change the setting, choose Site Properties... from the File menu. On the Options tab, check Force absolute text size to override the variable-text default.
If a font is unavailable and has been substituted, its font name on
the Context toolbar is prefixed by the "?" character.
To clear local formatting (restore plain/default text properties):

116 Formatting Characters and Paragraphs
One of the most dramatic ways to change your document's appearance is to change the fonts used in your artistic text, frame text, or table text. Applying different fonts to a character or entire paragraph can communicate very different messages to your intended readership.

Font assignment is very simple in WebPlus, and can be done from the Fonts tab, Text context toolbar, or in the Character dialog (via right-click, or from the Text menu). However, the Fonts tab lets you:

Formatting Characters and Paragraphs 117
The Fonts tab is automatically hidden by default, but can be viewed by clicking the arrow button at the left of your workspace.
Websafe fonts are a specially selected and configurable subset of fonts which offer the best font matches between your Web site (during design) and your web visitors' computers (during browsing). On publishing, Websafe fonts are only referenced (and not rasterized) as they are assumed to be available on a Web visitor's computer.
Generally speaking, it is advisable to keep to the standard list of Websafe fonts shown in the Fonts tab unless you can be sure of font usage amongst your target audience. These fonts are grouped together under the tab's Websafe category (an equivalent category exists on the text context toolbar's Font drop-down menu).
It's a good idea to establish the main text and graphic formatting to be used in your site early in the creative process. WebPlus facilitates this by letting you adopt named text styles (pre- or user-defined), which can be applied to frame text, table text, or artistic text. A text style is a set of character and/or paragraph attributes saved as a group. When you apply a style to text, you apply the whole group of attributes in just one step. For example, you could use named paragraph styles for particular layout elements, such as "Heading," "Quote," or "Body," and character styles to convey meaning, such as "Emphasis," "Code," or "Reference." Using styles not only speeds the task of laying out a site but ensures consistency and ease of updating.
Styles can be applied to characters or paragraphs using either the Text context toolbar or the Text Styles tab. Both paragraph and character styles can be managed from the Text Style Palette.
The Text Styles tab also lets you create new styles from scratch, create named styles from existing text properties, and swap a style for another across your Web site in one operation. Any style can be previewed against any selected paragraph directly on the page. See online Help for more details on these features.

118 Formatting Characters and Paragraphs
A paragraph style is a complete specification for the appearance of a paragraph, including all its font and paragraph format attributes. Every paragraph in WebPlus has a paragraph style associated with it.
A character style includes only font attributes (name, point size, bold, italic, etc.), and you apply it at the character level—that is, to a range of selected characters—rather than to the whole paragraph.

Formatting Characters and Paragraphs 119
The named style of the currently selected text is displayed in either the Text Styles tab or the drop-down Styles box on the Text context toolbar. A character style (if one is applied locally) may be shown; otherwise it indicates the paragraph style. You can use either the tab, the drop-down Styles box, or a dialog to apply a particular style to the existing text. The Text Style Palette lets you modify an existing style, import styles, or define a new style.
By default, a limited set of styles are shown in the Text Styles tab, although you can display all styles by checking the tab's Show All option (or via Tools>Options; UI Settings). The Default Paragraph Font, some common styles, and your document's currently used styles (plus any associated styles) will always be shown. You can preview any style and then apply it to a word, paragraph, or story.
To apply a named style:
The applied style appears in the tab's style list.

120 Formatting Characters and Paragraphs
For any text frame it's possible to apply bullets and numbering to lists and paragraphs alike. Bullets are especially useful when listing items of interest in no specific order of preference and numbered lists for presenting step-by-step procedures (by number or letter). WebPlus lets you apply the list style to normal text (as local formatting) or to text styles equally.

Within HTML text frames, basic bullet icons, numbers (numeric and Roman) and letters can be applied.
However, if you're using Creative text frames you can adopt basic as well as complex bulleted or numbered lists either by selecting presets (see below) or creating your own custom list style (these let you select your own symbols, numbers and letter formats). You then have the option of replacing an existing preset with your own preset based on your custom list style.


Bulleted list Numbered list
To create a bulleted or numbered list:

Formatting Characters and Paragraphs 121
Each time you insert a following return, a new line will begin with the specified symbol or number. In addition, typing two returns in a row (pressing Enter twice) cancels bullets or numbers and resumes regular paragraph formatting.
To restart list numbering (Creative frame text only):
To turn off bullets or numbering formatting:
WebPlus also lets you assign bullets and numbers to styles. (See WebPlus help.)

122 Formatting Characters and Paragraphs
You can insert symbol characters using either the Insert menu or (for common symbols) keyboard shortcuts.
As a rule for Web page use, don't employ symbols outside the
standard character set, or in non-standard fonts.
To insert a symbol character using the Insert menu:
The memory row below the font table keeps track of characters
you've recently inserted. Double-click any character in the row to insert it again.
Trouble inserting a character? Check your insertion point to ensure
it is still placed in your chosen text position.

Formatting Characters and Paragraphs 123
You can insert a date/time field into your text, stamped with current date/time information, by using Information>Date or Time... from the Insert menu. Various date and time formats are available. By default, the date/time field updates itself automatically when the site is saved or loaded. You can turn auto-updating off if necessary.
You can take advantage of the User Details dialog to store frequently-used or updated user information so you don't need to keep re-entering it—think of how often a mobile phone number or email address may change over time! The dialog lets you review all your User Details at a glance, and will update fields directly.
To review or change User Details:
The Custom tab of the User Details dialog includes blank, renameable fields where you can enter any information you may frequently need to "plug into" your sites.
To insert a User Detail field:
To update fields:

124 Formatting Characters and Paragraphs


126 Working with Tables

Working with Tables 127
Tables are ideal for presenting text and data in a variety of easily customizable row-and-column formats, with built-in spreadsheet capabilities.

Each cell in a table behaves like a mini-frame. Like frame text you can vary character and paragraph properties, apply named text styles, embed inline images, apply text colour fills, and use proofing options such as AutoSpell/Spell Checker, Proof Reader, and Thesaurus. Some unique features include number formatting and formula insertion.
Two types of table can be applied to the WebPlus page—the HTML table and the Creative table. These can be compared easily below—some features can be applied to both, or just to one or the other.
Searchable by search engines (Google, etc.) 9 8
Script insertion for generating dynamic content
Resize/move table 9 9
Crop table 8 8
Rotate table 8 91
Rotate table text (in cell) 8 91
HTML tables · Creative · tables

128 Working with Tables
Sort table contents 9 9
Solid fill and border colour 9 9
Gradient and bitmap fill 8 9
HTML-compliant Styles 9 8
Transparency 8 91
Borders 8 91
Warp 8 91
2D/3D Filter effects 8 91
Instant 3D 8 91
Edit cell text in WritePlus 9 9
View cell text in Site Manager 9 9
Import of Excel and text files 9 9
1 If applied, will export table as a graphic.
So how do you tell the difference between an HTML and Creative table? Simply, HTML tables will always possess dark blue corner/edge handles when selected, while a Creative table's handles will show as grey.
QuickClear/QuickFill/AutoFormat 9 9

Working with Tables 129
To create a table:
Creative Table Tool from the Table flyout on the Standard Objects toolbar, and click on the page or pasteboard, or drag to set the table's dimensions. The Create Table dialog appears with a selection of preset table formats shown in the Format: window.
HTML Table Tool or
The new table appears on the page, and the Table toolbar appears to assist with entering and formatting spreadsheet data.
WebPlus treats table text in three ways: as numbers, formulas, or ordinary text.
Once you've created a table, you can select, move, resize, delete, and copy it as an object, just as you would with a text frame. Cell properties can also be modified.
To manipulate the table object:

130 Working with Tables
To select and edit text in cells, rows, and columns:
Accept button to update the selected cell. Click
Cancel to reset the edit field to the previous cell text. Cells expand vertically as you type to accommodate extra lines of text. To enter a Tab character, press Ctrl+Tab.
Click the

Working with Tables 131
To move cell contents within the same table, select the cell(s), and hover over the cell border(s) until the move cursor is shown—click and drag the cell to its new cell location.
Table text can be sorted by row, column, multi-row, multi-column regions or entire table using the Sort button from the context toolbar. For more details, see online Help.
• · •

132 Working with Tables
To format numbers and insert formulas, switch on the Spreadsheet functions button on the Table toolbar. See online Help for more information.
To change the table's structure and appearance:


control button shown when hovering over the separating lines in the table row or column headings. Note that you can adjust a row's height independent of the amount of text it contains. For absolute row/column sizing, choose Set column width(s) or Set row height(s) from the Table menu (or use the right-click menu). For individual columns, click the column or row header's
button, choosing Set width or Set height. You can resize your columns without affecting the overall table width by adjusting the column heading with Ctrl-drag.
button and choose Evenly Distribute Rows. Conversely, use the equivalent button (and Evenly Distribute Columns command) at a row header to distribute columns on the chosen row.
•

Working with Tables 133
button, choosing Autofit Row to Contents or Autofit Column to Contents, respectively.
button and choose Delete.

Alternatively, select one or more cells, then choose Insert from the Table menu (Table>Insert from the right-click menu), then either Rows... or Columns... from the submenu. In the dialog, specify how many to add, and whether to add them before or after the selected cells.

134 Working with Tables
button, choosing Merge Cells. Do the equivalent with the Separate Cells command to split cells.
To copy cells (including text, formatting, borders, and colours) to a new cell in the same table, select the cell(s), press the Ctrl key and hover over the cell border(s) until the copy cursor is shown—click and drag the copied cell to its new cell location. Alternatively, select the cell(s), Copy and then Paste (both via the Edit menu) into a new cell while holding down the Shift key.
hand corner of the table until you see a
cursor—click once, and then use the Colour tab or Swatches tab to apply a colour fill. (See Applying solid colours on p. 213).
To use style presets to customize the table's appearance:
row header's · •

Working with Tables 135
To customize the appearance of one or more cells "by hand":
Cell Properties button on the Table toolbar. OR
For a whole column or row only, click the column or row header's
button, choosing Cell Properties....
The Calendar Wizard helps you design month-at-a-glance calendars for use on your Web page.

The wizard lets you set up the month/year and calendar style/format, and controls the inclusion of personal events and/or public holidays.
The calendar is created as a scalable text-based table so you can edit text using the standard text tools. The properties of a selected calendar are similar to those of a table, and can be modified identically (see Manipulating tables on p. 129).

136 Working with Tables
For calendar-specific properties, a context toolbar lets you change an existing calendar's month/year, modify calendar-specific properties, and manage calendar events (both personal and public holidays).
You can update calendar details throughout your Web site via Set User Details—in the same way that you'd set up the date (along with the time) on some alarm clocks. This is especially useful if you want to update the year on a year-to-view Web page, composed of 12 monthly calendars—you only need to change the year in one place.
To insert a calendar:
Insert Calendar.
To edit a selected calendar's properties:
Right-click on a calendar and choosing Table lets you select, insert, distribute, and delete rows and columns, but take care not to corrupt your table formatting!

Working with Tables 137
To update calendar details globally:
When you create a calendar you can set up the appropriate public holidays for the country you reside in. The holidays will show up in your calendar automatically. You can also swap to a different country's public holiday settings for any existing calendar if needed.
Remember to ensure that Add public holidays is checked in
Calendar Properties.
To swap public holidays:
You can complement your public holiday listings (e.g., Easter holidays) by adding personal events such as birthdays, anniversaries, and bill payments (unfortunately!) so that the events show up on your calendar—simply use the Calendar Events button on a selected calendar's context toolbar. Events show automatically on your calendar under the chosen date.

138 Working with Tables

To add an event:
New event button.
Browse button to select a date.
Delete Event buttons to modify or delete an existing event.
Remember to ensure that Add personal events is checked in
Calendar Properties.
Use the · Edit Event or

the Page

140 Editing Objects on the Page

Editing Objects on the Page 141
Before you can change any object, you need to select it using one of these tools from the Tools toolbar:
Pointer Tool Click to use the Pointer Tool to select, move, copy, and resize objects.
Rotate Tool Click to use the Rotate Tool to rotate an object around its centre. Select the object, then drag one of its handles. You can also use the Rotate Tool to move and copy objects. See Rotating an object.
Square Crop and Irregular Crop tools Choose either Crop tool from the Effects flyout to crop (or trim) objects. Select the object, then drag one of its handles inward. You can also use a Crop tool to move and copy objects. See Cropping and combining objects.
To select an object:
When selecting a text object with the Pointer Tool:
To select only the frame (for example, to adjust its margin and column guides), click the frame's bounding box.

142 Editing Objects on the Page
Simply clicking on any member of a group selects the group object. In general, any operation you carry out on a selected group affects each member of the group. However, you can also select and edit an individual object within a group.
To select an individual object within a group:
When you click to select an object, blue ruler regions indicate the left, right, top, and bottom edges of the object.
For details on using the rulers, see Rulers on p. 45.
Selecting more than one object at a time (creating a multiple selection) lets you:

Editing Objects on the Page 143
To create a multiple selection:
To add or remove objects from a multiple selection:
To deselect all objects in a multiple selection:
To select all objects on the page (or master page):
To select all objects of one type on the page (or master page):
Besides using the Windows Clipboard to copy and paste objects, you can duplicate objects easily using drag-and-drop, and replicate multiple copies of any object in precise formations. You can also transfer the formatting of one object to another, with the option of selecting specific attributes to be included when formatting is pasted.
To copy an object (or multiple selection) to the Windows Clipboard:
Select the object, click the
Copy button on the Standard toolbar, press Ctrl+C, or choose Copy from the Edit menu.
If you're using another Windows application, you can usually copy and paste objects via the Clipboard.

144 Editing Objects on the Page
To paste an object from the Clipboard:
Press Ctrl+V, or choose Paste from the Edit menu, or click the
Paste button on the Standard toolbar.
The standard Paste command inserts the object at the insertion point or (for a separate object) at the centre of the page. To insert a separate object at the same page location as the copied item, use the Paste in Place command (Ctrl+Alt+V).
To choose between alternative Clipboard formats:
To duplicate an object:
Duplicating an object means making just one copy at a time. The Replicate command lets you create multiple copies in a single step, with precise control over how the copies are arranged, either as a linear series or a grid. You can include one or more transformations to produce an interesting array of rotated and/or resized objects. It's great for repeating backgrounds, or for perfectly-aligned montages of an image or object.


Editing Objects on the Page 145
To replicate an object:
The result is a multiple selection. Click its
Group button if you want to keep the separate objects linked for additional manipulations.
Once you have copied an object to the Clipboard, you can use the Paste Format to apply its formatting attributes to another selected object. Paste Format Plus displays a "master control" dialog that lets you select or deselect specific attributes to be included when formatting is pasted. See the WebPlus Help for more information on the Paste Format Plus feature.
To paste one object's formatting to another:
The target object takes on any formatting attributes and settings of the source object that are currently defined in Paste Format Plus (see below).

146 Editing Objects on the Page
To move an object (including a multiple selection):
The view automatically re-centres itself as you drag objects to the edge of the screen.
To constrain the movement of an object to horizontal or vertical:
Release the Shift key after you release the left mouse button.
Use the Transform tab for fine-tuning the position of an object.
WebPlus provides several methods of resizing lines, shapes, artistic text, frame objects, and table objects. Click-and-drag is the simplest—watch the Hintline for context-sensitive tips and shortcuts! For extremely precise resizing, use the Transform tab.
To set two or more objects to the same horizontal or vertical size
as the last selected object, select the objects and then use Arrange>Size Objects....
To resize an object (in general):
Dragging from an edge handle resizes in one dimension, by moving that edge. Dragging from a corner handle resizes in two dimensions, by moving two

Editing Objects on the Page 147
edges. You can also constrain the resizing—note that pictures normally behave differently from lines, shapes, and text objects.
Text in frames and tables doesn't change size when the container object is resized.
To resize freely:
To constrain a shape, frame object, or table object when resizing:
These objects are normally constrained when resized, since you'll typically want to preserve their proportions.
To resize while maintaining aspect ratio (proportions):
To resize freely:
You can resize a group object. The size of images, graphic objects, and text objects in the group will change. The size of text inside frames or tables won't change, only the size of the text container.
Use the Transform tab for fine-tuning the position of an object.
You can rotate objects, including text objects and groups. (You cannot rotate a multiple selection.)
To rotate an object:
Rotate Tool on the Tools toolbar.

148 Editing Objects on the Page
To unrotate (restore the original orientation):
To rotate an object 90 degrees left or right:
Rotate Right command from the Arrange menu. You can also right-click the object and use the Flip/Rotate submenu.
To prevent a picture object from accidentally being rotated:
Cropping means masking (hiding) parts of an object or group, for example to improve composition or to create a special effect. The underlying object is intact. You can use either the Square Crop Tool or Irregular Crop Tool from the Tools toolbar to crop while preserving an object's original square (or rectangular) outline or crop by distorting the object's original crop outline, respectively.
Another cropping option is the Crop to Shape command, which lets you crop one object to the outline of another.
The Combine Curves command, like Crop to Shape, starts with more than one object, but creates a special composite object with one or more "holes" on the inside where the component objects' fills overlapped one another—useful for creating mask or stencil effects.
Rotate Left or

Editing Objects on the Page 149
To crop using the object's original outline:
Square Crop Tool from the Tools toolbar's Effects flyout.
To crop by modifying the object's outline:
Irregular Crop Tool from the Tools toolbar's Effects flyout. You'll now see the nodes and connecting segments that define the object's crop outline.
cursor, drag the node.
cursor, drag the segment.
To convert an outline from straight lines to curves and vice versa, click the Fit Curves and Straighten All Lines button on the Crop context toolbar.
•

150 Editing Objects on the Page
For information on different corners segment types and other options hosted on the context toolbar, and a more detailed look at editing lines, see Drawing and editing lines on p. 159.
To pan the visible portion of a cropped object within the crop area:
To uncrop (restore full visibility):
The Crop to Shape command works with exactly two objects selected. Either or both of these may be a group object. The lower object (the one behind the other) gets clipped to the outline of the upper object, leaving a shape equivalent to the overlapping region. Note that you can't crop a mesh-warped object, but can use one to crop another object. Use Combine Curves to use one shape to punch a "hole" in another.

To crop one shape to another:

Editing Objects on the Page 151
Combining curves is a way of creating a composite object from two or more lines or drawn shapes. As with cropping to a shape, the object in front clips the object(s) behind, in this case leaving one or more "holes" where the component objects overlapped. As with grouping, you can apply formatting (such as line or fill) to the combined object and continue to edit individual nodes and segments with the Pointer Tool. Unlike those other methods, a combined object permanently takes the line and fill properties of the front object. Combining is reversible, but the component objects keep the line and fill properties of the combined object.
Combining is a quick way to create a mask or stencil cutout:

To combine two or more selected lines or drawn shapes:
To restore the original shapes from a combined object:

152 Editing Objects on the Page
As objects are created, they are ordered in a stack, such that the most recently created object will overlap earlier ones. You can change the stacking order, which affects how objects appear on the page
To change the object's position in the stacking order:
Then:
To shift the selected object's position to the bottom of the stack, behind all other objects, select Send to Back (or use the Send to Back button on the Arrange toolbar).
To shift the selected object's position to the top of the stack, in front of all other objects, select Bring to Front (or use the Bring to Front button on the Arrange toolbar).
To shift the object's position one place toward the front, select Forward One (or use the Forward One button on the Arrange toolbar).
To shift the object's position one place toward the back, select Back One (or use the Back One button on the Arrange toolbar).
Alignment involves taking a group of selected objects and aligning them all in one operation—the operation is applied to all of the objects selected. You can perform the following:

Editing Objects on the Page 153
Alignment controls are available in either the Align tab or from Arrange>Align Objects....
It's also possible to align a single object either to the top, bottom, left, or right page edge or centre the object vertically or horizontally.
To align the edges of two or more objects:
To distribute two or more objects:
To align one or more objects with the page edge:
To align one or more objects with set page margins:

154 Editing Objects on the Page
You can easily turn a multiple selection (see Selecting multiple objects on p. 142) into a group object. When objects are grouped, you can position, resize, or rotate the objects all at the same time.
To create a group from a multiple selection:
Group button below the selection.Group Objects...
To ungroup (turn a group back into a multiple selection):
Ungroup button below the selection to turn back to a multiple selection.
Simply clicking on any member of a group selects the group object. In general, any operation you carry out on a selected group affects each member of the group. However, the objects that comprise a group are intact, and you can also select and edit an individual object within a group.
To select an individual object within a group:
To prevent accidentally moving, resizing, flipping, or rotating an object, you can lock it in position.
To lock an object:
To unlock an object:

Editing Objects on the Page 155
The Snapping feature simplifies placement and alignment by "magnetizing" grid dots and guide lines. When snapping is on, the edges and centres of objects you create, move, or resize will jump to align with the nearest visible grid dot or guides. Objects normally snap to the page edge, too.
Guide lines include ruler guides as well as layout guide lines based on page margins, rows, and columns (see Using layout aids on p. 44).
You may notice that with snapping enabled, when you move a guide, any "snapped to" objects will move with the guide. This object "stickiness" is enabled by default (with the Sticky Guides feature) but can be disabled permanently or temporarily as necessary (in Tools>Options>Layout). It is especially useful for selectively repositioning objects in bulk by guide movement, without any unnecessary grouping operations.
To turn snapping on and off:
Snapping button on the Hintline. When the button is down, snapping is on.
You control which points and lines are snapped to by showing or hiding the individual guide elements (i.e., Rulers, Guide lines, Frames, Dot Grid, etc.), and by changing options settings for those visible elements.
To show or hide guide elements:
To set which visible elements are snapped to:

156 Editing Objects on the Page
Object defaults are the stored property settings WebPlus applies to newly created objects, e.g. text, graphics, and frames. When you create text in your site, it will have default properties for font, size, colour, alignment, etc. New graphics or frames will have their own default properties. You can easily change the defaults for any type of object.
Default settings are always local—that is, any changed defaults apply to the current site and are automatically saved with it, so they're in effect next time you open that site. However, at any time you can use the Save Defaults command to record the current defaults as global settings that will be in effect for any new site you subsequently create.
To set local defaults for a particular type of object:
Or, for line and fill colours, including line styles:
To view and change default text properties:
To save all current defaults as global settings:

and Effects

158 Lines, Shapes, and Effects

Lines, Shapes, and Effects 159
WebPlus provides Pencil, Straight Line, Pen, and QuickShape tools for creating simple graphics.
Using the line tools (found on a Standard Objects toolbar's Line flyout), you can draw single lines, connect line segments together, or join line ends to close the line, creating a shape (see Drawing and editing shapes on p. 165 for details). Use the Pointer Tool and the Curve context toolbar to resize or reshape lines once you've drawn them.

The Pencil Tool lets you sketch curved lines and shapes in a freeform way.
The Straight Line Tool is for drawing straight lines; rules at the top and/or bottom of the page; or horizontal lines to separate sections or highlight headlines.
The Pen Tool lets you join a series of line segments (which may be curved or straight) using "connect the dots" mouse clicks.

160 Lines, Shapes, and Effects
To draw a freeform line (with the Pencil Tool):
Click the Line flyout on the Standard Objects toolbar and choose the Pencil Tool.
To draw a straight line (with the Straight Line Tool):
Straight Line Tool from the Lines flyout on the Standard Objects toolbar.
To constrain the angle of the straight line to 15° increments, hold
down the Shift key as you drag. (This is an easy way to make exactly vertical or horizontal lines.)

Lines, Shapes, and Effects 161
To draw one or more line segments (with the Pen Tool):
Click the Line flyout on the Standard Objects toolbar and choose the Pen Tool from the flyout. The Curve Creation toolbar appears, with three buttons that let you select which kind of segment you'll draw next.

A Straight segment is simply a straight line connecting two nodes. (Shortcut: Press 1)
A Bézier segment is curved, displaying control handles for precise adjustment. (Shortcut: Press 2)

Smart segments appear without visible control handles, using automatic curve- fitting to connect each node. They are especially useful when tracing around curved objects and pictures. (Shortcut: Press 3)


162 Lines, Shapes, and Effects
See WebPlus help for information on editing lines.
All lines, including those that enclose shapes, have numerous properties, including colour, weight (width or thickness), scaling, cap (end) and join (corner). You can vary these properties for any freehand, straight, or curved line, as well as for the outline of a shape (see Drawing and editing shapes). Text frames, tables, and artistic text objects have line properties, too.
To change line properties of a selected object:
Use the Swatches tab to change the line's colour and/or shade. (If changing the outline colour of a shape or other object, click the Line button so that the line, not the fill, will change.) Click a gallery sample in the tab's Publication or standard palettes to apply that colour to the selected object. Alternatively, use the Colour tab to apply a colour to the selected object from a colour mixer.
•

Lines, Shapes, and Effects 163
On the Line tab or context toolbar, the middle Line Styles drop-down menu provides the following styles: None, Single, Calligraphic, and several Dashed and Double line styles as illustrated below.

Several techniques offer additional ways to customize lines:
For dotted/dashed lines, select from one of five line styles (see above). OR (Tab only) Drag the Dash Pattern slider to set the overall pattern length (the number of boxes to the left of the slider) and the dash length (the number of those boxes that are black). The illustrations below show lines with dash lengths of (1) 4 and 2, and (2) 5 and 4:

For Double lines, select from one of four Double line styles (see above).

164 Lines, Shapes, and Effects
(Tab only) For Calligraphic lines of variable width (drawn as if with a square-tipped pen held at a certain angle), select the calligraphic line style (opposite) from the drop- down menu then use the Calligraphic Angle box to set the angle of the pen tip, as depicted in the examples below.

The Line tab also lets you vary a line's Cap(end) and the Join (corner) where two lines intersect. Both properties tend to be more conspicuous on thicker lines; joins are more apparent with more acute angles. The button icons clearly communicate each setting:
To access all Line properties:
Line/Border button on the Tools toolbar's Fill flyout.

Lines, Shapes, and Effects 165
WebPlus provides Pencil, Pen, Straight Line, and QuickShape tools for creating simple graphics. QuickShapes are pre-designed objects that you can instantly add to your page, then adjust and vary using control handles. Another way of creating shapes is to draw a line (or series of line segments) and then connect its start and end nodes, creating a closed shape. Once you've drawn a shape, you can adjust its properties—for example, apply gradient or bitmap fills (including your own bitmap pictures!) or apply transparency effects. You can even use sliding handles to create variations on the original QuickShape.
It’s also possible to use the always-at-hand QuickShape context toolbar situated above the workspace to swap QuickShapes, and adjust a QuickShape’s line weight, colour, style, and more. New shapes always take the default line and fill (initially a black line with no fill).
The QuickShape flyout contains a wide variety of commonly used shapes, including boxes, ovals, arrows, polygons and stars. You might use the QuickShape button for:


166 Lines, Shapes, and Effects
To create a QuickShape:
To draw a constrained shape (such as a circle):
All QuickShapes can be positioned, resized, rotated, and filled. What's more, you can adjust their designs using the Pointer Tool. Each shape changes in a logical way to allow its exact appearance to be altered. The ability to alter the appearance of QuickShape objects makes them more flexible and convenient than clipart pictures with similar designs.
To adjust the appearance of a QuickShape:
To find out what each handle does for a particular shape, move
the Pointer Tool over the handle and read the Hintline.
As soon as you draw or select a line, you'll see the line's nodes appear. Nodes show the end points of each segment in the line. Freehand curves typically have many nodes; straight or curved line segments have only two (1). You can make a shape by drawing a line between node end points (2), or by simply closing the curve (3).

Lines, Shapes, and Effects 167

To turn a selected line into a shape:
You can go the other way, too—break open a shape in order to add one or more line segments.
To break open a line or shape:
Break Curve button on the Curve context toolbar. A line will separate into two lines. A shape will become a line, with the selected node split into two nodes, one at each end of the new line.
See WebPlus help for information on editing shapes.
WebPlus provides a variety of filter effects that you can use to transform any object. "3D" filter effects let you create the impression of a textured surface and are covered elsewhere (see p. 171). Here we'll look at 2D filter effects exclusively. The following examples show each 2D filter effect when applied to the letter "A."

168 Lines, Shapes, and Effects
Reflection WebPlus additionally provides the Shadow Tool for applying a shadow to an object directly on your Web page.
To apply 2D filter effects:
Filter Effects button on the Tools toolbar’s Effects flyout.

Lines, Shapes, and Effects 169
A simple way to add creative flair to your page is to apply a vertical reflection on a selected object. The effect is especially eye-catching when applied to pictures, but can be equally impressive on artistic text, such as page titles or text banners. A combination of settings can control reflection height, opacity, offset and blurring.
WebPlus lets you create a coloured outline around objects, especially text and shapes (as a filter effect). For any outline, you can set the outline width, colour fill, transparency, and blend mode. The outline can also take a gradient fill, a unique contour fill (fill runs from the inner to outer edge of the outline width), or pattern fill and can also sit inside, outside, or be centred on the object edge.
As with all effects you can switch the outline effect on and off. You'll be able to apply a combination of 2D or 3D filter effects along with your outline, by checking other options in the Filter Effects dialog.
Various blur effects can be applied to WebPlus objects. The Types of blur include:

170 Lines, Shapes, and Effects
Shadows are great for adding flair and dimension to your work, particularly to pictures and text objects, but also to shapes, text frames and tables. To help you create them quickly and easily, WebPlus provides the Shadow Tool on the Tools toolbar's Effects flyout. The tool affords freeform control of the shadow effect allowing creation of adjustable basic or skewed edge-based shadows for any WebPlus object.

Basic (left) and skewed shadows
(right) applied to a square
QuickShape.
Adjustment of shadow colour, opacity, blur, and scaling/distance is possible using controllable nodes directly on the page (or via a supporting Shadow context toolbar). Nodes can be dragged inwards or outwards from the shadow origin to modify the shadow's blur and opacity. For a different colour, select the Colour node then pick a new colour from the Colour or Swatches tab. Depending on if a basic or skewed shadow is required, the origin can exist in the centre (shown) or at the edge of an object, respectively.


Lines, Shapes, and Effects 171
Once you've created a shadow, you can also fine-tune it as needed using the Filter Effects dialog.
3D filter effects go beyond 2D filter effects (such as shadow, glow, bevel, and emboss effects) to create the impression of a textured surface on the object itself. You can use the Filter Effects dialog to apply one or more effects to the same object. Keep in mind that none of these 3D effects will "do" anything to an unfilled object—you'll need to have a fill there to see the difference they make!

To apply a 3D filter effect to a selected object:
Filter Effects button on the Tools toolbar's Effects flyout.


172 Lines, Shapes, and Effects

You'll notice that Bump Maps and Pattern Maps come in two varieties: "2D" and "3D." They are all three-dimensional effects—the 2D/3D distinction refers to how each one achieves its result. With the "2D map" variants, you begin by selecting a bitmap from a gallery. With the "3D" Bump Maps and Pattern Maps, you first pick a mathematical function. The function-based maps include data about the interior of the "space," while the bitmap-based maps describe only surface characteristics.
Multiple effects. You can combine multiple 3D filter effects, as in the illustration above. The effects are applied cumulatively, in a standard "pipeline" sequence: 3D Bump > 2D Bump > 3D Pattern > 2D Pattern > 3D Lighting.
The 3D Bump Map effect creates the impression of a textured surface by applying a mathematical function you select to add depth information, for a peak-and-valley effect. You can use 3D Bump Map in conjunction with one or more additional 3D filter effects—but not with a 2D Bump Map.
The 2D Bump Map effect creates the impression of a textured surface by applying a greyscale bitmap you select to add depth information, for a peak- and-valley effect. You can use 2D Bump Map in conjunction with one or more additional 3D filter effects—but not with a 3D Bump Map.

Lines, Shapes, and Effects 173
The 3D Pattern Map effect creates the impression of a textured surface by applying a mathematical function you select to introduce colour variations. You can use 3D Pattern Map in conjunction with one or more other 3D filter effects. (See the overview above for background and technical details on these effects.)
The 2D Pattern Map effect creates the impression of a textured surface by applying a greyscale bitmap you select to introduce colour variations. You can use 2D Pattern Map in conjunction with one or more other 3D filter effects.
The uniform transparency of an object (with 3D filter effects applied) can be controlled via the Transparency tab (see first example below). However, for more sophisticated transparency control, especially for simulating reflective lighting effects on glass objects, transparency settings can instead be set within the 3D filter effects dialog (check the Transparency option). Transparency can be adjusted independently for both non-reflective surfaces (typically an object's edge shadows shown when side-lit) and top-lit surfaces (see second example below).

The 3D Lighting effect works in conjunction with other 3D effects to let you vary the surface illumination and reflective properties.

174 Lines, Shapes, and Effects
Using the Instant 3D feature, you can easily transform flat shapes (shown) and text into three-dimensional objects.

WebPlus provides control over 3D effect settings such as:
An always-at-hand 3D context toolbar hosted above your workspace lets you configure the above settings—each setting contributes to the 3D effect applied to the selected object. For on-the-page object control you can transform in 3D with use of a red orbit circle, which acts as an axis from which you can rotate around the X-, Y-, and Z-axes in relation to your page. Look for the cursor changing as you hover over the red circles' nodes or wire frame.

Lines, Shapes, and Effects 175
X and Y rotation
Transform about your 3D objects' axes instead of your pages' axes
by holding the Ctrl key down as you transform.
You can also adjust the angle and elevation of each "active" light on the page by dragging the light pointer to a position which simulates a light source.
After any transformation, the underlying base object remains
editable.
To add dimensionality:
Instant 3D button from the Tools toolbar's Effects flyout (or choose Instant 3D... from the Format menu). The object immediately adopts 3D characteristics with a red orbit circle displayed in the object's foreground.
If you're not happy with how your 3D object is looking, you can revert to the object's initial transformation by either clicking the Reset Defaults button on the context toolbar.
To switch off 3D effects:
X rotation · Y rotation · Z rotation

176 Lines, Shapes, and Effects
To edit base properties of a 3D object:

The object is shown without its 3D effect, allowing its selection handles to be manipulated for resizing and rotating.

A border in WebPlus is a repeating, decorative element that can be set to enclose an object, giving the appearance of a picture frame. Borders work especially well with imported pictures.
To add a border to an object:
Line/Border button on the Tools toolbar's Fill flyout.

Lines, Shapes, and Effects 177
Object styles benefit your design efforts in much the same way as text styles and colour schemes. Once you've come up with a set of attributes that you like—properties like line colour, fill, border, and so on—you can save this cluster of attributes as a named style. WebPlus remembers which objects are using that style, and the style appears in the Styles tab.

178 Lines, Shapes, and Effects

Here's how object styles work to your advantage:
As a bonus, the Styles tab ships with multiple galleries of pre-designed styles that you can apply to any object, or customize to suit your own taste!
Each object style can include settings for a host of object attributes, such as line colour, line style, fill, transparency, filter effects, font, and border. The freedom to include or exclude certain attributes, and the nearly unlimited range of choices for each attribute, makes this a powerful tool in the designer's arsenal.
To apply an object style to one or more objects:
Choose Format>Object Style>Create to create a new object style based on an existing object's attributes.

and Multimedia

180 Images, Animation, and Multimedia

Images, Animation, and Multimedia 181
WebPlus lets you insert images from a wide variety of file formats. Here's a quick overview:
You can also acquire images directly from PhotoCDs or via TWAIN devices (scanners or digital cameras).
There are several ways to bring an image into WebPlus. You can drag a file from an external Windows folder directly onto your page, drag a thumbnail from WebPlus's Media Bar (see p. 185), paste from the pasteboard, or import an image as a file via a dialog.
WebPlus lets you place your image onto the page at its original size. The image will be uncropped by default but you have the option to crop the image, and adjust the image's picture frame properties with respect to image positioning and scaling within the picture frame.

182 Images, Animation, and Multimedia
To add an image from the Media Bar:
To import an image from a file:
Import Picture... button on the Standard Objects toolbar's Picture flyout. OR In WritePlus: • Choose Picture File... from the Insert menu.
If there was no insertion point (or you answer "No" to the insertion prompt), you'll see the mouse pointer change to the Picture Paste cursor. What you do next determines the initial size and placement of the detached image.

Images, Animation, and Multimedia 183
For multi-image pasting, select multiple images in the Open dialog,
then paste each image one by one onto the page (by consecutive clicks).
The replace picture option lets you swap an image at any time, especially useful when you want to retain an image's position and dimensions on the page but want to update the image itself. It can be used on any image (uncropped or cropped).
To replace an image:
Replace Picture button directly under the selected image, locate and select an image. Click Open.
To replace an image via Media Bar:
WebPlus provides additional options for working with cropped images— either pictures you've cropped with the Crop tools (Tools toolbar) or replaceable pictures already present in design templates. For example, you can pan or zoom to adjust the portion of the image that displays inside its "frame," or you can change the way the image is scaled and aligned by adjusting its frame properties.
When you select a cropped image with the Pointer Tool, a control bar displays below the image, offering panning, rotation, zoom in, zoom out, and replace picture options.

184 Images, Animation, and Multimedia
, and then click and drag on the image.
button.
zoom in/out tools.
, then browse to locate the new image and click Open.
To alter frame properties:
Selecting an uncropped picture offers only a Replace Picture
button.
Embedding means the image in WebPlus is now distinct from the original file. Embedding results in a larger WebPlus file, and if you need to alter an embedded image you'll need to re-import it after editing. Still, it's the best choice if file size isn't an issue and graphics are final.

Images, Animation, and Multimedia 185
Linking inserts a copy of the image file into the WebPlus Web site, linked to the actual file so that any changes you later make to it in the native application will be automatically reflected in WebPlus. Linking is one way of avoiding "bloat" by limiting the size of the project file. On the other hand, you'll need to manage the externally linked files carefully, for example making sure to include them all if you move the WebPlus file to a different drive.
By default, WebPlus prompts you to embed images that are
You can check resources via Site Manager later on, to change an item's status from linked to embedded, or vice versa.
For dragging images from the Media Bar, images 256 KB are linked. However, you can change embed or link status with the Shift key as you drag.
To preselect embedding or linking based on file size:
The Media Bar acts as a "basket" containing photos for inclusion in your Web site. Its chief use is to aid the design process by improving efficiency (avoiding having to import photos one by one) and convenience (making photos always-at-hand). For photo-rich Web sites in particular, perhaps based on a WebPlus design templates, the Media Bar is a valuable tool for dragging photos directly onto unwanted pictures to replace them.

186 Images, Animation, and Multimedia

The Media Bar can be used as a temporary storage area before placing photos in your Web site, or it can be used to create more permanent photo albums from which you can retrieve stored photos at any time. By default, photos are added to a temporary album but remember to click the New Album button if you want to save your album for later use. Each time you start WebPlus you simply load that saved album (or any other saved album) or just work with a temporary album—the choice is yours!
You can import an unlimited number of photos by file or by whole folders, and whether photos are embedded or linked to your project in advance of photo placement on the page.
For large photo collections, searching throughout albums for photos by file name and EXIF, IPTC or XMP metadata is possible; even edit XMP metadata from within WebPlus.
The currently loaded album shown on your Media Bar will remain
visible irrespective of which document you have open.
Thumbnails can be dragged from the Media Bar directly onto an existing picture on your page, replacing it in the process. Alternatively, a picture can be added as new, being placed at its original size.

Images, Animation, and Multimedia 187
To view the Media Bar:
handle at the bottom of your workspace.
To add photos to a temporary album:
Unless you save it, the temporary album and its photo contents will
not be saved when you close WebPlus.
You can drag one or more files from any Windows folder directly
into the Media Bar window. If you right-click an image in the Media Bar and choose Locate in Explorer you'll open the photo's folder via Windows Explorer—great for drag and drop or just general file management!
To save a temporary album to a named album:
button. From the menu, select New Album.

188 Images, Animation, and Multimedia
To include a temporary album's photos in an existing saved album, click the Add To button and choose a named album from the menu.
To create a named album:
button.
Add Image... or
Add Folder... button.
To load a saved album:
A saved album can be selected as above and then modified via the Manage button (only shown for existing saved albums). You can add photos/folders, delete photos, change DPI, and alter embed/link status.
To rename or delete an album:
To sort results from an album:

Images, Animation, and Multimedia 189
To add a photo to your page:
When you export your project as a Web site, WebPlus applies certain global settings to determine how each image—whether drawn, pasted in, or imported—ends up as a separate bitmap displayed on the Web page.
Here's a quick summary of the conversion settings as they're initially defined for Web publishing:
You can alter these settings, but before doing so you should review the "logic" WebPlus applies to publishing Web graphics. First, WebPlus has one default format to which all graphics will be converted on export—but you can make exceptions to this rule by specifying that certain image types should remain as their original file. Initially, PNG is the default format, but with overrides set for GIFs. That's why, using the initial settings above, GIFs stay as they are while all other graphics get converted to PNGs.
You can check and change these settings in the Site Properties dialog (File Menu). The settings there are global and apply to all graphics in the site—but again you can make exceptions, in this case for individual graphics. To do so, for a selected graphic you could:

190 Images, Animation, and Multimedia
This combination of global and local settings gives you almost total control (if you care to exercise it) over how your graphics make it onto your Web pages! Let's look first at how the global settings work.
To set global export options for Web graphics:

Images, Animation, and Multimedia 191
The Image Export Manager is a Wizard that lets you set the export file format for individual graphics in the site, or for objects such as rotated text that will be converted to images on export. These local, image-by-image settings override the global settings (as set in File>Site Properties) which WebPlus uses to determine the export format. You can run the Wizard to check a single selected image, the current page, or the entire site. For each image, you can save it using different methods. Either:
Let your own eye be the judge. Your best bet is to retain the Use site default settings option for all images to start with. Using the original global settings, this means that GIFs, JPEGs, and PNGs will be exported as their original files, while any others, including QuickShapes and closed shapes, will be published as PNGs. Then preview your site and determine if you want to vary the global settings or try a different output format for specific images.
Even if you don't change any format settings, you can set a picture title which will normally appear as a tooltip when the image is moused over in a browser. You can also enter alternativee text (manually or automatically) for accessibility reasons.
To set export format, title, and/or alternative text:

192 Images, Animation, and Multimedia

Images, Animation, and Multimedia 193
The Picture context toolbar appears automatically when you select an image on the page. You can use the toolbar to improve the appearance of any image appearing in your drawing by adjusting brightness and contrast directly, setting levels and contrast automatically, fixing red eye or by applying Image adjustments. The context toolbar also hosts other photo manipulation tools.
Image adjustments are made possible with a comprehensive mix of colour correction/adjustment tools for use on your newly imported images. Levels, Colour Balance, Channel mixer, Dust and Scratch Remover and Hue/Saturation/Lightness corrective adjustments, amongst others, are available. Effect-inducing adjustments also range from the artistic Diffuse Glow to various blur effects. In fact, over 20 adjustments can be directly applied to your image not only individually but cumulatively.
Adjustments are managed in the Image Adjustments dialog. The gallery offers a one-stop shop for applying your adjustments—all supported by a dynamic preview window!

194 Images, Animation, and Multimedia

Adjustments can be applied to imported pictures as well as objects
converted to pictures within WebPlus.
If you're looking to carry our some more advanced photo editing and have Serif's PhotoPlus software (10.0 or above) installed, you can use the Edit in PhotoPlus.A button on the Picture context toolbar to load the image directly into PhotoPlus. You can carry out your edit and save the file in PhotoPlus—if embedded or linked, the newly altered image is refreshed and updated in WebPlus automatically.
Adding an adjustment is as easy as choosing an option from a drop-down menu in the Image Adjustments dialog. To assist in the selection of an appropriate adjustment the list is separated into corrective adjustments (in the first half of the list), and effect-inducing adjustments (in the second half). As soon as an adjustment is selected it is added to a stack where additional adjustments can be added and built up cumulatively. Any adjustment can be switched on/off, deleted or reordered in this list. The order in which they appear in the stack may produce very different results—if you're not happy with your current order—WebPlus lets you drag and drop your adjustment into any position in the stack.

Images, Animation, and Multimedia 195
Adjustments are applied such that the most recently added adjustment always appears at the bottom of the list and is applied to the picture last (after the other adjustments above it). In the above example, the Diffuse Glow effect is applied to the picture first, followed by Levels.
To add an image adjustment:
button on the Picture context toolbar.
Add Adjustment.
For more complex adjustments, make changes in a pop-up dialog (click Advanced Properties to access). NOTE: Some adjustments have no properties and are applied directly as they are selected.
Add more than one adjustment to the picture by repeating the above procedure.
To delete an image adjustment:
button.
In the same way in which a layer's contents can be made visible/invisible, the Mute button can be used to temporarily make an adjustment invisible or visible.

196 Images, Animation, and Multimedia
The properties of any selected adjustment can be changed in one of two ways:
The properties of an applied adjustment can be changed by clicking the Advanced Properties button alongside the effect (in Image Adjustments dialog)—this is because some effects are more complex to modify by their nature and need to be presented in a separate dialog.
Adjustments can be moved around the stack to change the order in which they are applied to the picture. Drag an adjustment name to another position in the list while holding down the mouse button. A dark line indicates the new position in which the entry will be place if the mouse button is released.
If your scanner or digital camera provides TWAIN support, you can scan pictures directly into WebPlus using the TWAIN standard, or save the scanned image as a TIFF or PCX and then import into WebPlus.
To set up your TWAIN device for importing:
To import a scanned image:
If you have more than one TWAIN-compatible device installed, you may need to select which source you wish to scan with.
•

Images, Animation, and Multimedia 197
To select a different TWAIN source for scanning:
WebPlus lets you add several varieties of eye-catching animation effects to any web page: animated marquees, GIF animations, and Flash (.SWF) files. For any of the animation effects, you can preview the animation and/or customize the effect. Once placed into your Web site, the animations appear static, but they will spring to life once the site has been exported and a visitor views your page in a Web browser.
Bear in mind that animations do add to the "overhead" or load
time your page requires, and may not display as quickly on the Web as when previewed.
Animated marquees are an impressive way to add horizontally scrolling motion to a headline or catch phrase. You can choose the background colour, enter from one to three lines of text, define text properties (choose from any installed font), scroll direction, speed and alignment for each line. If you like, you can define any link destination type for the marquee (see Adding hyperlinks and anchors on p. 225). For the most compelling effect, select two lines with strongly contrasting text colours and opposing scroll directions.
Animated marquees appear as static graphics on the WebPlus page. You can cut, copy, move, and resize them just like other graphics. They will animate when previewed or viewed in a Web browser.
To create an animated marquee:
Insert Animated Marquee button on the Web Objects toolbar's Media flyout.

198 Images, Animation, and Multimedia
To edit an animated marquee you've already defined:
WebPlus lets you select and preview any animated GIF. They are particularly useful to illustrate particular themes or just add some fun to your page! All GIF animations appear as static images on the WebPlus page and, just like any image, you can cut, copy, move, and resize them just like other graphics. They will animate when previewed or viewed in a Web browser.
To preview and insert an animated GIF:
Insert Animated GIF button on the Web Objects toolbar's Media flyout.
Picture Paste cursor. Click to insert the animation at a default size or drag to a custom size.
A Flash (*.SWF) file is a viewable movie using the Flash™ Player format. (Flash is a vector-based program designed to create and display small files on the Web.) Flash files can be added to your page (much like an image) and will play within your page view without the need for previewing in your browser (or WebPlus preview window). You can cut, copy, move, and resize them just like other graphics.

Images, Animation, and Multimedia 199
To see some Flash files in action, the Gallery tab hosts a stunning collection of Flash banners (each with pre-assigned Flash parameters already set) which can be easily adopted. These banners are designed to allow you to customize their appearance (i.e., text, images, and scheme colours) without any prior Flash design experience.
To insert a Flash file:
Insert Flash file button on the Web Objects toolbar's Media flyout.
Picture Paste cursor. Click to insert the file at a default size or drag to set a custom size region.

200 Images, Animation, and Multimedia
To edit a Flash banner:


Images, Animation, and Multimedia 201
banner is referenced in the parameters list, e.g. for "3 Image" banners, Pic1URL, Pic2URL, and Pic3URL represents the first, second and third pictures listed in the Additional Files list. You can either reorder pictures in the Additional Files list (not the Parameters list) using the Up or Down buttons to make pictures appear in a different sequence or use the right-most Add... button to add new files to the Additional Files list to replace currently referenced pictures. There's no need to edit the Parameter values at all—the key is to set the pictures and their order in the Additional Files list only.
Remember to remove any unwanted pictures from the Additional
Files list.
The selected Flash banner is shown with any previously made edits applied.
If you experience any playback problems when Flash files are
placed on your page, it is possible to uncheck Load Flash previews in Tools>Options (Layout menu option). Exported web pages containing Flash files are unaffected.
WebPlus lets you augment your Web pages with sound and video files in a variety of standard formats, including both non-streaming and streaming media. In addition, WebPlus lets you include third-party videos already hosted on www.youtube.com

202 Images, Animation, and Multimedia


Images, Animation, and Multimedia 203
With both background and linked sound (or video), you have the option of embedding the source file in your project file, as opposed to keeping it separate (remember that YouTube videos cannot be embedded in your project). Although embedding any file adds to the size of the project, it is the default option because you'll no longer have to worry about juggling separate files or the chance of accidentally deleting one of them. When you publish your site, WebPlus takes care of exporting and copying both embedded and non-embedded files.
To add background sound to a page:
The sound file will download and play back when the Web page displays in a browser.
The basic question is how you want the visitor to be able to trigger the playback of a given media file. WebPlus offers the same basic options for both kinds of media:

204 Images, Animation, and Multimedia
With the first two options, the media file remains external and can't be embedded in your project. Options 3 to 5 give you the choice of embedding the media file.
To add linked sound or video to a page:
To embed a YouTube video:
Embed YouTube Video button on the Web Objects toolbar's Media flyout. OR Choose Media from the Insert menu and select YouTube Video... from the submenu.
Paste cursor where you want the top-left corner of your video to be placed.

Images, Animation, and Multimedia 205
Some Web sites may require their YouTube video(s) to be swapped for another on an occasional or more regular basis. For example, the site may host a regularly changing top 10 or videos with topical content. Either way, WebPlus can replace videos without affecting their placement.
To swap your YouTube video for another, double-click an existing YouTube video. From the dialog, paste a previously copied video URL into the input box.
To link from an icon, picture, or inline player:
Insert Video Clip button on the Web Objects toolbar's Media flyout.
Insert Sound Clip or
The simultaneous expansion of digital camera usage and Broadband services has created a fantastic opportunity for publishing photo collections on Web pages. There are a multitude of reasons for doing so but some common ones include:
In WebPlus you can add a Flash™ photo gallery to any Web page. By using the power of Flash you can also adopt some eye-catching gallery styles, each offering different ways of cycling through photos. Photo galleries let you navigate via a top or bottom control bar or, depending on gallery style, by using:

206 Images, Animation, and Multimedia

Photos can be imported by file or folder, or from a TWAIN device (digital camera/scanner). Once arranged in a gallery structure the photo's thumbnails can be manipulated in a variety of ways. It's possible to:

Images, Animation, and Multimedia 207
The Photo Gallery is inserted on the page, just like an individual image, after collecting your images together from file, folder, camera, or scanner.
All the images are output as JPGs regardless of the original image
type and the settings in File>Site Properties>Graphics.
To insert a Photo Gallery:
Insert Flash Photo Gallery button on the Standard Objects toolbar's Picture flyout.
Your images display as thumbnails in the Flash Photo Gallery dialog.
Any selected thumbnail can be resized by dragging from its lower right-hand corner. Drag when you see the cursor change.

208 Images, Animation, and Multimedia
Large images are automatically scaled down (to 800 x 600 pixels;
96dpi) to reduce file sizes (and improve upload times).
Bottom buttons in the Arrangement box.

Images, Animation, and Multimedia 209

The last three options only show if background music is used.
7. (Optional) For the selected style, use the Settings pane to modify various gallery-wide options (accompanying background music, font colour, AutoPlay, etc.). Some options are specific to a gallery style such as enabling/disabling thumbnail rollovers, number of thumbnails shown, photos per stack, etc. Blur amount controls how much blurring occurs between photos. AutoPlay will automatically start photo display at a set but configurable time interval (in seconds). Otherwise, the control bar shown on the photo gallery after publishing can initiate photo playback.
To insert the gallery at a default size, position the displayed cursor where you want the gallery to appear on the page, then simply click the mouse. OR To set the size of the inserted gallery, drag out a region and release the mouse button.
Once added to the web page, the Photo Gallery can be edited. Images can be added, removed, rotated, captioned, or adjusted via Image Adjustments. You can also swap your existing gallery style for another, change background music, caption text colour, and set your gallery to autoplay (photos will automatically cycle).

210 Images, Animation, and Multimedia
To edit a Photo Gallery:
The Flash Photo Gallery dialog is displayed. The options available are the same as those available when the gallery was created.
Once a gallery is placed on the page it's also possible to drag a corner of the gallery object to resize. Use the Ctrl key while dragging to maintain the aspect ratio.
It is possible to connect to any image currently available on the Internet. However, to prevent copyright infringement it's advisable to use images from a reliable image hosting service. Many exist on the Internet but services such as ImageShack are particularly popular. Of course you may be able to "hotlink" to other images (from a friend or colleague's Web site) where legal implications are not an issue but it's only polite to ask for permission first!
To insert a remote image:
Picture Paste cursor. What you do next determines the initial size and placement of the image.

Transparency

212 Colour, Fills, and Transparency

Colour, Fills, and Transparency 213
WebPlus offers a number of ways to apply solid colours to objects of different kinds:
You can use the Colour tab, Swatches tab or a dialog box to apply solid colours to an object.
To apply a solid colour via the Colour tab:
Text button at the top of the tab to determine where colour will be applied. The colour of the underline reflects the colour of your selected object. For frame text, the Fill will be the background text colour (but not the frame's background colour).
You can't apply a Fill as a background colour to artistic text.
In RGB colour mode, you can use decimal colour coding by
selection from the Colour tab's
Tab Menu button.
Fill or · Line, or

214 Colour, Fills, and Transparency
To apply a solid colour via the Swatches tab:
Text button at the top of the tab to determine where colour will be applied.
Select a colour swatch from the Publication Palette (commonly used colours and those previously applied in your site) or Palette (standard RGB or themed palette presets such as WebSafe colours).
Alternatively, use Format>Fill... to apply colour via a dialog.
To change a solid colour's shade/tint (lightness):
Object tinting can also be applied via the Swatches tab—adjust the percentage tinting via slider or direct input.
WebPlus automatically adds used colours to the Publication Palette in the Swatches tab. This palette is loaded by default but instead you can view and adopt colours from a standard RGB, WebSafe, or selection of themed palettes by clicking the tab's Palette button. Colours can be added, edited or deleted from the Publication Palette but not from other palettes.
Fill or · Line, or

Colour, Fills, and Transparency 215
Each WebPlus site uses a global colour scheme which you can manage using the Scheme Manager. Each scheme has a name and consists of five complementary basic colours which you can apply to any design element. (These work like a paint-by-numbers system, as explained below.) In addition, each scheme includes adjunct colours which apply specifically to hyperlinks (default, followed, active, rollover), off-page window backgrounds, and on- page colours. Switching to a different colour scheme instantly updates all elements that use scheme colours!

Colour schemes in WebPlus work much like a paint-by-numbers system, where various regions of a layout are coded with numbers, and a specific colour is assigned (by number) to each region (see the flower opposite, using the "Nursery" scheme). Swapping different colours into the "paint jars" numbered 1 to 5, while keeping the numbers on the flower the same, would automatically produce quite a different colouration.
The example above shows how the scheme "Atlantis" could be applied to the site to replace the "Nursery" scheme, the "Chocolate" scheme could then replace the "Atlantis" scheme, etc.
In WebPlus, the "paint jars" are known as "Scheme Colour 1," "Scheme Colour 2," and so on. When you apply Scheme Colour 1 to an object, it's like saying, "Put the colour from jar number 1 here."
Each site can have just one colour scheme at a time; the current scheme is indicated in the Swatches tab. You can easily switch schemes, modify scheme colours, apply schemes to any site, even create your own custom schemes. Colour schemes are saved globally, so the full set of schemes is always available.

216 Colour, Fills, and Transparency
To select a colour scheme:
button on the default context toolbar (or choose Tools>Scheme Manager...) to display the Scheme Manager, which lists the various available schemes for your Web site, each with a different set of colours in their respective "jars."
You can repeat this selection process indefinitely. When you save a site, its current colour scheme is saved along with the document.
Besides the five basic colours, each scheme includes six adjunct colours.
Adjunct colours

Colour, Fills, and Transparency 217
The adjunct colours defined in the Scheme Manager normally apply throughout the site, with several important exceptions:
If you create new elements in a Web template site, or start a site from scratch, how can you extend a colour scheme to the new objects? Although you'll need to spend some time working out which colour combinations look best, the mechanics of the process are simple. Recalling the paint-by-numbers example above, all you need to do is assign one of the five scheme colour numbers to an object's line and/or fill.

218 Colour, Fills, and Transparency
To assign a scheme colour to an object:
Text button at the top of the Swatches tab depending on the desired effect.
If an object's fill uses a scheme colour, the corresponding sample in Swatches tab will be highlighted whenever the object is selected.
If you've tried various colour schemes but haven't found one that's quite right, you can modify any of the colours in an existing scheme and update the scheme, or create your own separately named scheme based on the existing scheme.
To modify a colour scheme:
button on the default context toolbar (or choose Tools>Scheme Manager...) to display the Scheme Manager.
Fill, · Line, or

Colour, Fills, and Transparency 219
To create a new scheme, you can follow the above procedure but, at Step 7, enter a new scheme name instead of overwriting the existing scheme.
Gradient fills (linear, elliptical, or conical) provide a gradation or spectrum of colours spreading between two or more colours. A gradient fill has an editable path with nodes that mark the origin of each of these key colours. A bitmap fill uses a named bitmap—often a material, pattern, or background image—to fill an object.
You can apply preset gradient and bitmap fills from the Swatches tab to shapes, text frames, table cells, and to any artistic, creative frame, and creative table text (but not to HTML frame text or HTML table text) . Using the Fill Tool from the Tools toolbar's Fill flyout (or from Format>Fill), you can vary the fill's path on an object for different effects (see online Help).
Applying different transparency effects (using the Transparency
tab) won't alter the object's fill settings as such, but may significantly alter a fill's actual appearance.
Linear Elliptical · Conical Bitmap

220 Colour, Fills, and Transparency
The easiest way to apply a gradient or bitmap fill is to use one of a range of pre-supplied swatch thumbnails in the Swatches tab's Gradient or Bitmap palettes. The Fill Tool and a Fill dialog are alternative methods for creating gradient fills (these are covered in online Help).
To apply a gradient or bitmap fill using the Swatches tab:
Fill button is selected. NOTE: The colour of the underline reflects the colour of your selected object (or selected node).
For gradient fills, select Linear, Elliptical or Conical as the gradient type from the Gradient button's drop-down menu. OR
For bitmap fills, select a drop-down menu category from the Bitmap button.
Transparency effects are great for highlights, shading and shadows, and simulating "rendered" realism. They can make the critical difference between flat-looking illustrations and images with depth and snap.
Transparency may seem a bit tricky because by definition, you can't "see" it the way you can see a colour fill applied to an object. In fact, it's there all the time in WebPlus. Each new object has a transparency property: the default just happens to be "None"—that is, no transparency (opaque).

Colour, Fills, and Transparency 221
Transparencies work rather like fills that use "disappearing ink" instead of colour. The more transparency in a particular spot, the more "disappearing" takes place there, and the more the object(s) underneath show through. Just as a gradient fill can vary from light to dark, a transparency can vary from more to less, i.e. from clear to opaque, as in the illustration:

Here, the hexagonal shape has had a Linear transparency applied, with more transparency at the lower end of the path and less at the upper end. It makes a difference which object is in front (here, the pentagon); where there's more transparency, more of the object(s) behind will show through.
In WebPlus, transparency effects work very much like greyscale fills. Just like fills...
As for the effects available on the Swatches tab, all are comparable to the fills of the same name:

222 Colour, Fills, and Transparency
You can apply gradient and bitmap transparency from the Transparency tab to shapes, text frames, table cells, and to any artistic, creative frame text, and creative table text (but not to HTML frame text or HTML table text). Alternatively, using the Transparency Tool from the Tools toolbar's Fill flyout (or from Format>Transparency), you can vary the transparency's path on an object for different effects.
To apply transparency with Transparency tab:
Solid button and pick a thumbnail from the solid transparency gallery. OR
For gradient transparency, choose the
Gradient button and pick your thumbnail. OR
For bitmap transparency, choose the
Bitmap button and pick a thumbnail from a range of categories.
Alternatively, drag the desired thumbnail from the gallery to an object.
To apply gradient transparency with Transparency Tool:
Transparency Tool on the Tools toolbar's Transparency flyout.
The process of editing gradient transparencies is the same as that for editing gradient fills (see online Help).

Interactivity

224 Adding Hyperlinks and Interactivity

Adding Hyperlinks and Interactivity 225
Hyperlinking an object such as a box, some text, or a picture means that a visitor to your Web site can click on the object to trigger an event. The event is most commonly a jump to one of the following:
Well-designed hyperlinks are an important aspect of site structure. They help visitors navigate through your site and serve as an important adjunct to logical page relationships as shown in the Site Structure tree. (But don't overlook the time-saving advantages of using theme graphics for navigation elements such as navbars and Previous/Next buttons.)
You can manage all hyperlinks and anchors throughout your site by using the Site Manager, accessible from the Hintline or via Site Manager>Hyperlink Manager... on the Tools menu.

226 Adding Hyperlinks and Interactivity
To add a hyperlink:
You can also simply click for an insertion point in text. If you select
in—or immediately before/after—a word, then the whole word will be hyperlinked. If your selection point has a space on both sides, WebPlus inserts helpful text (for example, the name of the target page).
Hyperlink button on the Tools toolbar. The Hyperlinks dialog appears.

Adding Hyperlinks and Interactivity 227
To modify or remove a hyperlink:
Hyperlink button on the Tools toolbar's Hyperlink flyout.
The Hyperlinks dialog appears with the current link target shown. If the link is in text, the whole text link highlights.

228 Adding Hyperlinks and Interactivity
To view or edit existing hyperlinks:
An anchor is a specific location on a page that can serve as the target for a hyperlink. Invisible to the Web page visitor, it typically marks a point within some text (such as the start of a particular section) or an image at some point down the page. Anchors are useful if your page has enough content to be divided into sections, but not enough to require carving up into separate pages. These let the reader jump to related content without leaving the current page. In the same way, keeping Web visitors on the same page makes it less likely they'll get "lost' while perusing the information on your site.
To insert an anchor:
Anchor button on the Tools toolbar's Hyperlink flyout. OR Choose Anchor... from the Insert or right-click menu.
To view or edit existing anchors:

Adding Hyperlinks and Interactivity 229
A hotspot is a transparent hyperlink region on a Web page. Usually placed on top of graphics, hotspots act like "buttons" that respond when clicked in a Web browser. They are especially useful if you want the visitor to be able to click on different parts of a picture (such as a graphic "menu" or map of your site). You can draw and edit hotspots by hand, or create them to match an existing shape.
To draw a hotspot:
Insert Hotspot button on the Web Objects toolbar.
To match a hotspot to an existing shape:
The two objects will still be separate, so you can easily delete the
shape if it's no longer needed once you've used it as a template to produce a hotspot of a desired shape.
To modify a hotspot hyperlink:
Hyperlink button on the Tools toolbar's Hyperlink flyout (or choose Hyperlink... from the Insert menu).

230 Adding Hyperlinks and Interactivity
The Hyperlinks dialog appears with the current hotspot link target shown.
You can move and resize hotspots on the page, just like other objects. A selected hotspot has both an outer bounding box and an inner outline, which serve different purposes.

To move or resize a hotspot:
By editing the inner outline, you can convert rectangular hotspots into freeform shapes that closely match the parts of the underlying graphic you want to be "hot." To edit the outline, first move the mouse pointer over the hotspot's inner outline until the cursor changes to indicate whether you're over a node or a line.


Adding Hyperlinks and Interactivity 231
To create an extra node on a hotspot:
cursor.
To change the shape of a hotspot's outline:
cursor.
The term rollover refers to an interaction between a mouse and a screen object. For example, you can point your mouse at a graphic (such as a navigation bar button) on a Web page, and see it instantly change colour or become a different picture. When you point to a Web page object, your mouse pointer physically enters the screen region occupied by the object. This triggers an event called a "mouseover" and, if the underlying code is there to "trap" this event, it can trigger some other event—such as swapping another image into the same location. An object whose appearance changes through image-swapping in response to mouse events is called a rollover graphic.
As a prerequisite to creating a rollover graphic in WebPlus, you'll need to prepare a picture for each distinct rollover state, using a separate graphics program. The necessary event-trapping code is generated for you automatically. WebPlus also lets you directly import rollover graphics created in Serif DrawPlus (see below).
Adding rollovers is basically a matter of deciding which rollover state(s) you'll want to define for a layered graphic, then specifying an image for each state. WebPlus provides four basic choices:

232 Adding Hyperlinks and Interactivity
You'll also have the option of specifying a hyperlink event—for example, a jump to a targeted Web page—that will trigger if the user clicks on the object. And you can even group buttons on a page so they work together and only one at a time can be down.
To create a rollover graphic:
Insert Rollover button on the Web Objects toolbar's Navigation flyout. OR Choose Web Object from the Insert menu and select Rollover... from the submenu.

Adding Hyperlinks and Interactivity 233
7. Check Radio button if you want to link all the buttons (on a given page) that have this option checked, so that only one of them at a time can be down. If you use this technique, make sure all rollover graphics you want to link have the option checked. Although it doesn't matter how the buttons are distributed on the page, typically they'll constitute a visible unit like a navigation bar. Any buttons with the option unchecked are independent.
WebPlus displays the image assigned to the Normal state. It's a good idea to preview the page and test each rollover object, then return to WebPlus and revise as needed. When you preview or publish the Web site, WebPlus takes care of exporting one image file for each rollover state, and the HTML file for the published page incorporates the JavaScript code for the rollover event trapping.
To revise a rollover graphic:

234 Adding Hyperlinks and Interactivity
For each object with at least one activated rollover state, you'll need to provide a source image. It's the often subtle differences between the Normal image and the "variants" that make the object appear to switch from one state to another. For example, if you've checked the "Over" state for an object, you need to include a variant image that the Web page can display when the button is moused over. In the following example, two variants of a Home button are shown—one showing the button highlighted (on mouse over), and a second image in its default Normal state.
You'll need to create these source images in a separate image-editing program. Here are some things to consider:

Adding Hyperlinks and Interactivity 235
The most common use for popup rollovers in WebPlus is to hover over a picture thumbnail to show its larger representation, usually offset next to the thumbnail. The feature is simple to use and works in a similar way to the more advanced Flash Photo Gallery. One exception is that the WebPlus rollovers can have several states and only work with identically sized different "variant" images, whereas popup rollovers has two states (normal and hover over) and shows the same or a different image (normally resized to be larger).

WebPlus lets you choose the position and size of the popup in relation to the thumbnail; even the thumbnail can be selected and resized at any time.

236 Adding Hyperlinks and Interactivity
With respect to states, WebPlus provides two basic choices:
If captioning is required on popup rollovers this can be made to popup next to your Over image. Caption text can adopt various attributes such as font, bold/italic, size, colour.
To create a popup rollover:
Popup Rollover button on the Web Objects toolbar's Navigation flyout.
At this stage you've defined normal and over images to use. However, for popup rollovers to work effectively you'll need to position the Normal and Over images on your page.

Adding Hyperlinks and Interactivity 237
Positioning is carried out from a dedicated dialog, where each state image can be moved and resized by dragging (or by setting absolute pixel values). Each image adopts a coloured border—green for Normal state, blue for Over state.
The dialog additionally shows any previous popup rollovers in its preview window, and offers previously used Left, Top, Width, and Height values for easy alignment with the existing popup rollovers.
To position rollover images:
If you deselect an image, the drop-down list shows No Selection.

238 Adding Hyperlinks and Interactivity
By building up additional Normal images as separate popup rollovers on your Web page you can create a stylish popup gallery of images, with each Normal image being part of a sequence of clickable thumbnails.
To edit a popup rollover:
To add captioning to Over images:
The caption text only shows on the Over image, so to position the text on your Over image you'll need to double-click the Normal image on your page. From the dialog, click the Set Rollover Position... button and reposition the text (as you would for Normal and Over images). All selected caption text shows with a red border during preview.
In WebPlus, certain types of theme graphic called navigation elements are programmed to understand your site structure, making it easy to design a site that's simple to navigate. You just select a navigation element—such as a Navbar (navigation bar), or a Previous or Next button—from the Studio's Theme Graphics tab (or a dialog) and WebPlus does the rest!
Previous/Next buttons automatically link laterally, to adjacent pages on the same level. Navbars combine buttons with popup menus to facilitate movement between the various sections and levels of a site. For example, in this navbar the buttons provide links to the Home page and various top-level section pages, while popup menus link to child pages within each section.

Adding Hyperlinks and Interactivity 239

You can easily install navigation elements at any level of your site, reconfigure them to link to a particular part of the site, change the appearance of the popup menu, and exclude particular pages from navigation as needed.
When you define a navigation element, you use standard terminology like "Parent Level" or "Previous/Next" to specify which part of the site should be linked to, relative to the starting page—i.e. which buttons should be included.
Because navigation elements "understand" your site structure, they update dynamically if you alter page names or relationships, or cut/paste the navigation element to another page! The links are always relative to the page where the element is located. For example, if a navbar links to child-level pages, it will continue to do so—even if that means linking to different pages—if you move it, or the page it's on, to a different place in the structure.
You can place navigation elements on master pages, too—which saves you the trouble of pasting the same element to multiple pages. A navigation element on a master page behaves as if it's on each page—consistent with the notion that its buttons and menus are relative to where each page sits in the overall site structure.
Navigation elements can also be set to include any anchors that you have defined. This opens up possibilities for navigating to various sections of long pages or to repeating areas.
To add a navigation element:
Insert Theme Graphic button.

240 Adding Hyperlinks and Interactivity
To add a navigation bar:
Insert Navigation Bar button on the Web Objects toolbar's Navigation flyout , or choose Navigation Bar... from the Insert menu.
All navigation elements can also be added from the Studio's Theme Graphics tab. To add any element, expand your chosen gallery for the element's Set or Type, and simply drag and drop onto the page.
Because navigation elements are theme graphics, you can use the Theme Graphics tab to select coordinated design elements (buttons, etc.) for a consistent look, and change the overall appearance with a single click. To edit theme graphic properties such as font, text colour, and mouseover fill colour, select the object and click its
Edit button. (You can also right-click it and choose Edit Theme Graphic....) For details, see Incorporating theme graphics on p. 50.
Navigation bars have their own special dialog for reconfiguring navigation properties.
To configure a navigation bar:

Adding Hyperlinks and Interactivity 241
By default, all pages in the tree are included in navigation—that is, they can be linked to by navigation elements. You can exclude certain pages (any but the Home page) so they'll be ignored by navigation elements. For example, suppose you had a section of reference or archival pages that you didn't want visitors to explore top-down. Excluding the parent page for that section would remove it from the navbar. Note that excluding the page from navigation doesn't remove it from the site—the page will still appear in the Site Structure tree and you can still install hyperlinks to it; it just won't show up in a navbar.

242 Adding Hyperlinks and Interactivity
Included pages show a
mark in their page entry in the Site tab's Site Structure tree, while excluded pages lack the mark.
To exclude a page from navigation:
The setting is also available in the Page Properties dialog (Page
tab).
If you're looking to rearrange the order or hierarchy of your navigation bar items to be different from you Site Structure, WebPlus will allow you to customize any navigation bars—you can also add, edit, or delete elements which will access a range of link destination types (see Adding hyperlinks and anchors on p. 225) just as in Site tab's Site Structure.
To customize a navigation bar:
Any selected element in the customize window can be edited or deleted.

Adding Hyperlinks and Interactivity 243
WebPlus lets you add a navigation site map to your Web site. This useful feature enhances Web site accessibility by providing clickable links to all sections of your site.

You may like to create your site map on a Web page which is
included in your Web site's Navigation Bar. This allows site map access from all Web pages.
To add a navigation site map:
Site Map Tool on the Web Objects toolbar's Navigation flyout.

244 Adding Hyperlinks and Interactivity
Navigation site maps automatically update if you add, delete, or
rename pages, or change the relationships between pages.
Java is a cross-platform, object-oriented programming language used to create mini-applications called applets that can be attached to Web pages and that run when the page is viewed in a Web browser.
You can add add a Java applet to your page by click the
Insert Java Applet button on the Web Objects toolbar's Media flyout. See online Help for more information.

Content

246 Adding Dynamic Content

Adding Dynamic Content 247
HTML code is the underlying tagged code which your Web site visitor's Internet browser reads, interprets and formats your page according to the tags used. The code and tags used are the instructions to which a page will be formatted, and as such it is vital that the code is correctly structured and conforms to HTML convention.
WebPlus supports the development of web pages in HTML. You can add pages within the Site tab's Site Structure window—a distinct HTML page icon is shown.
HTML pages in the Site tab can be controlled in a similar way to standard pages, i.e. you can drag/drop, rename, preview, insert offline links to, estimate download time, or include the page in navigation. However, HTML pages do not have master pages associated with them, In addition, a double-click of the HTML page icon will launch the HTML page's Source window for HTML editing (rather than the WYSIWYG display of a standard page). In the Source window you'll see some basic HTML tags which, if you're an experienced HTML developer, will be very familiar to you!

There is no WYSIWYG view when you work with HTML source
code directly.

248 Adding Dynamic Content
From this point, editing of the "template" HTML structure is required. Typically, text is inserted (by typing or pasting) between the opening and closing tags; each paragraph starts and ends with the and tags, respectively. You can also insert annotation tokens into your HTML code (see Attaching HTML code on p. 249) via right-click (pick Insert Token). The remainder of the HTML code outside of the opening/closing body tags does not need to be altered.
Editing HTML code requires prior understanding of HTML language
and its convention. Poor editing may result in corruption of your code on the page or site level.
If you're new to HTML and need to start with the basics, it's best to search for "HTML tutorials" in your favourite Internet search engine before tackling HTML editing in earnest.
To create an HTML page:
To add one page after the original page, click the down arrow on the Add button directly above the Pages window. From the drop-down menu, choose New HTML Page.
To edit an HTML page's source:
If you want to discard all changes to the HTML code, select the Clear Changes button on the context toolbar above the HTML window.
To return to Design View:
button on the context toolbar above the HTML window.
•

Adding Dynamic Content 249
In WebPlus, you can create pages in HTML (see Creating HTML pages on p. 247). However, WebPlus also lets you attach code to your WebPlus objects (e.g., in frames or table cells) and pages, primarily to expand the capabilities of the objects (or the page), making them more intelligent and interactive. The object or page can either dynamically generate content or can have its appearance altered within its area as a result of embedded script content.
It's not possible to edit the HTML code itself (there's no real benefit in doing so), but specific areas of the displayed code are editable for additional code to be added, i.e. clearly identifiable placeholders (text surrounded by a white highlight) will appear in your source tab's window.
These are just a few of the editable placeholders present in the source of an HTML fragment, object or page (in fact differently named placeholders exist depending on the type of element). For example, the last placeholder shown in the list above is unique to a page's source and won't appear for an object or HTML fragment.
Any code can be inserted by cut and paste into any of the placeholder positions but typically you can include tokens, HTML code or specific scripts, e.g. JavaScript. This could be used to affect rollover behaviour on an object not otherwise possible without scripting support, e.g. an image "on-click" handler.

250 Adding Dynamic Content
WebPlus also allows you to "view source" on a page—allowing extra HTML code to be added to the page. Using this approach, you can include fragments either copied from another Web page, or perhaps written by yourself.
You can also import formatted HTML text from a browser or email program via the Clipboard (for example with a browser's Select All and Copy commands), using WebPlus's File>Paste Special... command. Using the Import Web Pages option, you can import one or more HTML pages into your new or existing WebPlus site, with control over which additional elements are imported.
Before you import your HTML code, WebPlus lets you position an HTML Code Fragment window on your page. Since you won't be able to see the effect of the HTML until you preview the site, be careful to place the window correctly. You'll definitely want to check your Web page in a browser! If there's a problem, double-check the code you entered and its position on the WebPlus page (resizing if necessary). If you have some grasp of HTML, examine the page source in a text editor such as Notepad or use your browser's "View Source" mode.
To add an HTML code fragment to a page:
Insert HTML Code button on the Web Objects toolbar. OR Choose Web Object... from the Insert menu and select HTML... from the submenu.

Adding Dynamic Content 251
To source a vast array of JavaScript code, try searching for "javascript snippets" in your favourite search engine. You should find many thousands of sites hosting freely available code snippets. Most of these sites will clearly indicate what the JavaScript will do for you—they'll also normally let you select the JavaScript code and copy it for pasting into an HTML fragment's, object's or page's Source window, HTML table cell or directly onto the page.
Here are some typical uses when applying code to your web pages:
Let's look at how to add some of JavaScript (sourced or written by yourself if you've experience of JavaScript programming).
To illustrate, compare the two pieces of example code below. A very simple JavaScript code snippet is added to the Source window which will display the current date on your web page. The first section of code uses the last placeholder in the above list (<!--Page Body Start-->), the second how the code looks after a script has replaced the placeholder.

252 Adding Dynamic Content


Code after added JavaScript
This example illustrates where simple code is placed in a source window.
To attach code to an HTML fragment or object:
Code showing placeholder

Adding Dynamic Content 253
You can make use of tokens to add a range of variables to your
HTML. Use for breadcrumb navigation that will update dynamically if you add, remove or change pages within the site.
For more complex scripting, it may be necessary to add supporting files (graphics, text files, etc.) that the inserted script may use—these can be either embedded or linked. This means the files are either kept with the WPP project (embedded) or are referenced externally via a link (much like a hyperlink). Consider your final project file size when embedding several images.
To add supporting files:
At any point, you can Add, Delete, and change Export Options for any file.

254 Adding Dynamic Content
To attach code to a page:
All objects in WebPlus are given unique alphanumeric IDs for referencing by scripting languages. By default, ID generation is automatic for each object, text column, table row and table cell. For example, a newly drawn QuickShape will automatically be assigned an ID of "qs_1", a second QuickShape will be "qs_2", pictures could be "pic_1", "pic_2", etc.
It may be perfectly acceptable to utilize these automatic IDs in your scripts but if you need to assign your own IDs, it's possible to turn off the site-wide automatic generation of IDs in the Options tab of the Site Properties dialog (select Site Properties... from the File menu). Uncheck the option specific for object, text column, table row and/or table cell and press OK. Your own replacement IDs can instead be added in the available placeholder, i.e.
If the object is copied on the same page or to another Web site,
the ID number will be replaced by a new ID number.

Adding Dynamic Content 255
Any object ID can be edited once the object is on the web page. A different name can be used or, if you don't want to show an object's ID (but want to keep site-wide ID generation), you can prevent the ID from being shown in source code.
To edit an object ID:
WebPlus provides a range of grouped HTML annotation tokens which can be attached to HTML fragments, objects or pages. They get replaced by appropriate "real" values when you export to a file or preview your page.
Adding tokens is a simple case of inserting a token string, by copy and paste or typing directly, into one of the placeholder positions in any HTML source.
A full list of such tokens is provided in the WebPlus Help (search for tokens in the Index)
Web-based forms allow information to be collected from visitors to your Web site in an efficient and modern manner. In much the same way as traditional paper forms are used to collect information, Web-based forms offer the same form completion concepts, but take advantage of the Internet as a powerful information conduit. Some common form types include request forms, feedback forms, and guest books.
Form data can be collected in a variety of ways—by email, to a local/remote script file, or via Serif Web Resources.

256 Adding Dynamic Content
The building blocks of a form comprise a mixture of text, graphics and form controls. Form controls are intelligent as they collect web visitor data and can be added, moved and modified in a similar way to familiar objects in WebPlus such as graphics and table elements. A control can be a button, edit box, text area, combo box, check box, radio button, File browser, or CAPTCHA object. A typical form, perhaps a email feedback form, is made up of a combination of some of these controls, i.e.

In WebPlus, the form should be integrated into your site design as you develop your site. Of course, a whole page could occupy a single form, and the page could be a part of the site-wide navigation bar (check Include in Navigation in Page Properties).

Adding Dynamic Content 257
A form's functionality only becomes active when your Web site is published (of course you can still preview your forms from within WebPlus, see Previewing your Web site on p. 321). When a web visitor enters data into, or selects a form option, the data will be sent back to a chosen destination when the form is submitted.
JavaScript can be used to allow interactivity in your Web forms. It drives formatting, validation, calculations, and actions—all key functions in Web- based form development.
Where is data sent?
After submission, form data can be sent to one of the following:
As is standard in Web form management, it is possible to set the encoding type, target window/frames, submission methods (POST or GET) can be used.


258 Adding Dynamic Content
Several methods exist for creating forms dependent on whether you wish to be helped with a Form Wizard, use standard forms (i.e. pre-defined ready-to-go forms supplied with WebPlus), or create a form from scratch. Whichever method is chosen will depend on the level of customization you want to go to—as a rule of thumb, it's always best to familiarize yourself with WebPlus's standard forms that could be used first. This may save you time, and allow you to create your form more easily.
To create a form (via Form Wizard):
Form Wizard on the Web Objects toolbar's Form flyout.

Adding Dynamic Content 259
4. Repeat the above for each chosen form control as needed. They will be listed (in order of creation) in the upper window. Before continuing, you have to add a Submit form control to your form. This is vital to pass data to its destination. Click the Submit Button to automatically add the button to your form. It is normal practice to accompany this with a Reset Button, used to clear out form fields of data not yet submitted. Click Next>.
To insert the form at a default size, position the form place cursor where you want the form to appear on the page, then simply click the mouse.
If you prefer a different approach, you can add a Standard form. Standard forms are pre-defined forms for Contact information, User comments, CV submission, Opinion, and Address forms to name a few.
To create a standard form:
Form Wizard on the Web Objects toolbar's Form flyout.

260 Adding Dynamic Content
Move Down buttons.
To insert the form at a default size, position the form place cursor and click the mouse.
If you're looking for design freedom, WebPlus provides a blank form and form objects from which you can design your form from scratch. You can add form controls or standard form objects, or both. See WebPlus help for more details.
Each form control is an "intelligent" object which differs from other WebPlus objects. They are intelligent because they can store user input and pass it on to a central location during form submission. Controls can be moved as for other objects but cannot have colours or transparency applied, borders adjusted, or resized.
A range of form controls are available from within the Form Wizard or directly from the Web Objects toolbar's Form flyout (or via the Form option on the Insert menu). You assign an internal unique name to each field and then set a variety of properties—each form control has its own set which can be modified.
Move Up and

Adding Dynamic Content 261
Use when specifying an action that can be triggered by a button click. A whole range of buttons of varying design and function can be created. Some uses include:
Submit and Reset buttons are
available in the Form wizard. They perform form submission and clear all form data, respectively.
Edit Box Use for entering single-line text, numbers, or a mixture of both. Someone's surname or insurance number would be a good example.
Text Area Use for adding multi-line text, numbers or a mixture of both. Generally used for entering input, either textual or numerical, e.g. an enquiry, recipe, or list of figures.
For selection from a list of items in a drop- down menu where only one item can be selected by default, e.g. a gender combo.

262 Adding Dynamic Content
Combo boxes also allow for a scrollable list of items; with optional support for multiple selection. For example, to select Afghanistan, Algeria, and Andorra, use Ctrl-click on each item:

You can use Shift-click to group select a range of items.
When designing multiple selection
combo boxes, drag the top or bottom of the Combo box to allow several items to be displayed by default.
Check Box Ideal when you want to select multiple items displayed side by side. A good alternative to a Combo Box if space allows. The web visitor clicks once to select or deselect the box, e.g.
Would you like to be notified of any upcoming events in the near future?
Good for selection of a single mutually exclusive item from a grouped subset of choices. For example, a set of radio buttons can be used to obtain gender information from the web visitor.
Radio Button

Adding Dynamic Content 263
Use the File browser to have your web visitors upload any file from their computers. The visitor simply navigates via a Browse... button and selects a local file of their choice. Some examples include uploading pictures, CVs, drawings and instructions.
CAPTCHA Use as a security check for protecting against spamming. The form control offers a random text string for the Web visitor to reproduce in an text box. Passing the check initiates form submission.
Hidden objects can be added as a form control if you use the Form Wizard. Although the web visitor does not see the field it is typically used by the Web developer to ensure the data collected has an identifiable string stored with the user's data. An example could be a publish date relating to the web page— useful for identifying incorrectly working pages.
In addition, hidden fields can be added by right-clicking on the entire form and selecting Edit Form Properties.... The dialog's Hidden Fields tab allows for input of any number of hidden fields.
Each form control type (buttons, text field, etc.) has different characteristics and therefore different values for editing. Values can be changed as you create the form or at a later time after the control has been added to the form. Typically you may want to:
File Browser

264 Adding Dynamic Content
The Form Wizard's Edit Control... button lets you modify the control during form creation. Alternatively, the control can be edited later by right-clicking on the form control on the web page and choosing the Edit option, e.g. Edit Text Box.
Editing a combo box is a little more complicated than other fields. The combo box needs to be populated with multiple entries to create selection choices within the box. In the Form Combo Box dialog, use Add Option... to sequentially build up your menu entries—this involves adding name and value pairs one-by-one (use the Add Another button to speed up the process).

Any Combo Box will also support Groups. This means you can categorize entries into common groupings for easier navigation. While the group itself is not selectable you can make more sense of a long list of entries by creating the group name (click Add Group...) and moving entries under the group with
Combo Box editing

Adding Dynamic Content 265
the Make Child button (position entry under the chosen group). For example, a country combo box could be categorized by continent.
Radio box from controls operate slightly differently to other form controls. To operate correctly, Radio buttons which are intended to be grouped, must both be configured to be a part of the same configurable Group Name. Simply create a group name for the first radio button and adopt that name for any other radio buttons intended for that group.
All forms have one thing in common—they must be submitted to allow data to be collected. To do this you can either create a Submit Button unaided or more usually use the ready-made button in the Form Wizard. The button needs to be present on the form and is typically used with a Reset button to clear all form controls of data.
Radio Box editing

266 Adding Dynamic Content
Form data is not submitted. This option is useful if you want to temporarily disable data collection or if you haven't yet set up scripting or Serif Web Resources. At a later time you can edit the form (right-click then choose Edit Form Properties...) and select a valid submission method.
Use this option to bypass the usual POST/GET submission methods. When the Submit button is pressed the web visitor's default email program is launched. The form data (passed in a single string) is added to the email body and is ready to be sent to the configured email destination. Especially useful if there is no local or remote scripting in place.
This is an unsecure submission method—any
private or confidential information will be not be encrypted.
To set up email directly:
Not everyone will have access to or even want to operate their own Web server so, as an alternative to this, you can use Serif Web Resources (see p. 306). This is a free Web to email gateway service which will transit your valued form data via Serif and send it to your personal email address— the service does require that you firstly have a Serif Web resources login (for security reasons), which will allow you to create, edit and delete your own email destinations; these are called Form Email Targets.
To set up Serif Web Resources:
No action · email address · Serif Web Resources

Adding Dynamic Content 267
3. From the dialog, enter your destination email in the New Target box and click Add New Target. The email entry is created and added to the available email address list—with the email address selected, click OK. You'll notice that the entry is classed as "Not Confirmed". Before the service commences, you'll get a email confirmation message sent to your email address. By clicking the link, the service will be activated and the entry will change to "Confirmed".

You may be wondering what typical form data might look like once sent through Serif Web Resources. Here's an example of data collected from a simple form.
Time Submitted: Thu, 23 Jan 2008 17:45:10 BST Referrer: From IP: 80.6.91.225 firstname = Doug lastname = Walker gender = Male info = Social Events
Incidentally, the web visitor will receive a basic confirmation page generated by Serif Web Resources to acknowledge successful receipt of form data. As a useful tip you can create and assign your very own acknowledgement web page to be

268 Adding Dynamic Content
used instead of this basic page. Your own page is just like any other web page so you can add your own information, and design the page in the same style and appearance as the rest of your Web site.
To add your own acknowledgement page:
No personal data will be stored on Serif Web
servers. All form data is redirected in real time.
This option is for experienced Web developers with scripting expertise.
Script file from my hard drive
Typically a script file is written and stored along with WebPlus's other web pages and is uploaded during the Publish to the Web operation. If uploading to an ISP, it's essential to check with your ISP in advance if scripting is allowed on your web space. If not, you will have to adopt another solution, perhaps choosing another ISP that allow scripting or choose a script file hosted on your ISP (most provide a simple script; you would use the Remote script option below for this). If in doubt, contact your ISP if you're not sure.

Adding Dynamic Content 269
To set up a local script file:
Use if your ISP will not allow you to run your own scripts on your ISP web space. Instead, your ISP may supply a basic script file that can be linked to from your web page. Typically, the script will send the form data back to your email address (already setup with your ISP).
To set up a remote script file:
A Remote script

270 Adding Dynamic Content
Really Simple Syndication (RSS) feeds are streams of constantly changing news and information which are very popular on fast-paced Web sites. The popularity of RSS feeds is evident if you use Internet-based news services regularly. You'll see RSS feeds indicated on Web sites by a
symbol—by clicking the symbol the user may be able to manually or automatically subscribe to that RSS feed via a RSS Reader.
Podcasts are syndication feeds just like RSS feeds but offer slightly different options that reflect a podcast's use of digital media such as audio and video files. Put simply, RSS feeds will publish articles, while podcasts will broadcast information as episodes.
In WebPlus, you can create your own RSS feeds or podcasts that you can frequently publish and update. In essence, you become the publisher (rather than the reader) of one or more information services containing headlines, Web site summaries or your very own articles. For podcasts, you broadcast media clips as episodes. Web visitors can subscribe to these feeds via manual or one-click subscription. For the latter, the visitor simply clicks on a diagnostic symbol which indicates the type of feed, i.e.
For RSS Feeds.
For podcasts.
One-click subscriptions are set up to subscribe the visitor to a chosen reader, i.e. Google Reader, My Yahoo!, or Apple iTunes®. For manual subscription (e.g., to Internet Explorer or Mozilla Firefox) your published RSS feed or podcast offers a clickable subscription button, i.e.
Using podcasts as an example, the Web visitor sees a podcast in their chosen reader once subscribed. The examples below show a constantly updating fictitious school's podcast with clickable links to media (both audio and video).

Adding Dynamic Content 271


RSS feeds and podcasts can be configured in a very similar way in WebPlus. In fact, the process for creating your own RSS feed or podcast utilizes the same RSS Feed Tool within WebPlus.
If you want to reuse a third party RSS feeds/podcasts and add it to your own Web page, a reader can be embedded into your Web page by using the RSS Reader Tool.
As an emergent technology, feeds will only be viewable in the latest versions of Internet browsers. Here is a simple list outlining browsers and their versions which can read a feed within its own browser (with no third-party plug-ins required).

272 Adding Dynamic Content
If you are using a previous version of the above don't worry! There are a range of feed readers available via the Internet (type "RSS reader" into your favourite search engine) which will work equally well. Notable readers include Newz Crawler, FeedDemon and Awasu.
The RSS Feed Tool enables you to create one or more RSS feeds/podcasts from which web visitors can subscribe via their standalone feed reader, Web browsers or Apple iTunes®. As you create a feed a series of settings can be applied to the feed which relate to feed title/descriptions, associated images, copyright information, categories, keywords, etc.
To insert an RSS feed or podcast:
RSS Feed Tool button on the Web Objects toolbar's RSS flyout.
For example, a podcast feed for a school's podcasting service (shown above) would look as follows:


Adding Dynamic Content 273
You'll notice a series of episodes associated with the podcast feed. We'll look at how to add these later.
cursor and simply click the mouse.
button appears at the cursor position (for an RSS feed or podcast, respectively).
For one-click automatic subscription of podcasts, label your
podcast symbol indicating which application the subscription will be made to.
To swap the feed for another:
RSS Feed Tool button again will display an interim dialog that lets you redirect the button to another feed. Simply select a different entry and click OK.
Once the RSS feed or podcast is created, articles or episodes (respectively) can be added to the feed and then published just as in the printing industry (newspapers and magazines) and broadcasting (BBC, CNN, ITV, Sky, etc.), respectively. Once updated, you'll need to republish your Web site (see Publishing to the Web on p. 322).
or

274 Adding Dynamic Content
To add or update articles:
RSS Feed Tool button on the WebPlus's Web Objects toolbar.

If you're broadcasting media files stored locally, you'll be prompted
to define a Site Base URL (see p. 63) during publishing. This makes local files accessible to visitors.

Adding Dynamic Content 275
For podcasts via iTunes, as a broadcaster you'll need to have your podcast submitted to iTunes. The podcast feed has to be reviewed by iTunes staff to check for technical problems, an acceptable login, inappropriate use of explicit language, offensive material, and misuse of copyright material. This step means that if your feed is approved, iTunes users will then be able to subscribe to your podcast feed.
To submit a podcast feed to iTunes 7:
Subscription to RSS feeds or podcasts differs depending on whether automatic or manual subscription is to be offered, and which Web browser/feed reader is to be used. When a web visitor visits a Web page which hosts a feed, they should be able to spot the diagnostic feed button for subscription.
Instead of a direct button, a hyperlink (see p. 225) can be created from anywhere in your site which links directly to your new feed. A special link destination type called RSS Feed is used.
Automatic subscription to podcasts
icon (or associated hyperlink) is clicked according to the visitor's preferred chosen subscription. The podcast and reader is defined explicitly, so subscription is automatic. An example could be as follows:
An

276 Adding Dynamic Content

Manual subscription via Web browsers
button. The feed page is displayed.
The feed is added to the visitor's browser Feeds tab within the Favorites Center (Internet Explorer) or as a Live Bookmark (Mozilla Firefox). See your Web browser documentation for more details on these "bookmarking" processes. To unsubscribe, simply delete from the Feeds pane or delete the Live Bookmark in Bookmarks, respectively.
Instead of creating you own RSS feed or podcast you may wish to include an RSS feed from another Web site on your own Web page—a web page's content can be boosted by inclusion of a feed from any popular news service (Reuters, BBC News, sport, etc.) or other information service (e.g., financial). Many major news and information services host lists of RSS feeds relating to specific areas of interest (geographical, entertainment, political, music, etc.) so it's just a case of copying the link for the Web site's RSS feed and pasting it into a dialog shown when clicking the WebPlus's RSS Reader Tool.
Internet Explorer 7 · Mozilla Firefox

Adding Dynamic Content 277
Please bear in mind any terms and conditions in using a third-party RSS feed—these should be clearly indicated on the originating Web site.
The addition of the RSS feed reader to your page automatically subscribes yourself to the chosen RSS feed or podcast. There are other ways of subscribing to RSS feeds or podcasts via Web browsers and iTunes, but here we'll focus on how to include the feed on your page and have it automatically receive articles or episodes.
Here's an example of a BBC News podcast added to a WebPlus Web page:

To include an RSS feed or podcast on your page:
RSS Reader Tool button on the Web Objects toolbar's RSS flyout.

278 Adding Dynamic Content
cursor is displayed. To insert the feed in a window of default size, simply click the mouse. OR More typically, to set the size of the feed window, drag out a region and release the mouse button.
The feed window will be filled with a peach colour with the URL shown— you'll need to publish the page to view the current new feed. Remember that the content will update automatically as the feed is updated on the original Web site. A typical published podcast feed could look as follows (but will update frequently):

When the Web visitor views the feed each episode can be played by clicking on the audio link, typically pointing to an MP3 file. Once downloaded and saved, the file can be played on a currently set default player (e.g., Windows Media Player).

Adding Dynamic Content 279
E-commerce entails the buying and selling of goods on the Internet. It's difficult to escape online retailing in any Internet session these days—you've more than likely used some form of Internet shopping at some point, when buying online CDs, books, holidays, etc. Any Web site that supports this kind of e-commerce activity will typically make use of a shopping cart provider and a payment processing system. A shopping cart is a virtual basket (think of a supermarket basket) which stores your chosen items and is used in conjunction with a payment processing system (taking the place of the supermarket's checkout).
For major companies, the shopping cart technology is developed in-house (maybe the payment processing is carried out by a third party company). For smaller companies or organizations, the shopping cart is normally a brought- in third-party solution due to the cost/resource limitations. There are many third-party shopping cart providers that can be used—all account-based and equipped to accept credit cards instead of using a traditional payment gateway (e.g., by phone).
So where does WebPlus fit into all this? Firstly, WebPlus allows you to choose one of several specially chosen shopping cart providers (depending on WebPlus version) and, secondly, it allows you to connect to the shopping cart provider via a form or link on the WebPlus page. Forms allow for buying options (colours, quantity) to be set, as well as calculate tax rates, shipping, bulk items, etc. Links offer simple one-click purchasing without buying options. The features are provider-specific and as a result vary widely.

280 Adding Dynamic Content
Configuring your shopping cart provider
A number of different shopping cart providers can be configured within WebPlus. These are the most commonly used and some, like PayPal©, you may have come across directly as an eBay© customer. The configuration process directs you to the provider's own Web site from where you can sign- up as a registered user.
Use the provider's Web site to find out more about unique
shopping cart features.
To setup a shopping cart provider:
Configure E-Commerce button on the Web Objects toolbar's E-Commerce flyout.
As an example, choosing PayPal lets you define a email address to receive payments, or use a "Sandbox", a test tool, for trying out your shopping cart before going live (otherwise you may start making money before you're ready!). Click the Find Out More button to setup a separate Sandbox login in addition to your "live" PayPal login.

Adding Dynamic Content 281
The creation of e-commerce objects within WebPlus takes a Wizard-based approach. An e-commerce object can be added to the web page as a form or link (i.e., a simple button or any object's hyperlink) by completion of a series of dialogs. Whether you choose to use forms or links depends on the characteristics of the items you are planning to sell, and how you want to sell your goods.
For example, if you are a trader wishing to sell a quantity of bricks you could create an E-Commerce button (as a Buy Now link). This option would make an assumption about the potential transaction, i.e. that all the bricks are the same style/colour and that the buyer would wish to purchase a fixed amount.
This is because a link is only a button and cannot host any "interactive" buying options that would be need for more complex purchases. One buyer's click will buy a standard product offering—nothing more. Useful in some situations but in others completely inadequate.
More complex purchases using E-Commerce Forms offer user interactivity coupled with flexibility. If we take the brick trader as an example again, a form can be used to host quantity and brick style/colour options so that the customer has control and can get what he/she wants!

Here the web visitor has chosen to buy 2600 bricks of style "Clamp - Orange."
For e-commerce scenarios, where many items are to be offered for sale, it's possible to store items for sale in a Serif database (SDB) specially structured for use with e-commerce. By adding repeating forms (or areas) on your page, the database items can be listed after database merging, and offered for sale. See Using database merge with e-commerce on p. 297.

282 Adding Dynamic Content
Form And Link Options
Forms When to use?
Buy Now When directing the shopper straight to the checkout. Up to two buying options can be defined. Form validation is supported.
Add to Shopping Cart When the shopper is likely to buy more than one different item over the duration of a web session (and pay at the end). Up to two buying options can be defined. Form validation is supported.
Donation For charitable donation being made via the shopping cart. Form validation is supported.
Subscription For subscriptions with configurable trial periods and billing intervals. Form validation is supported.
Repeating Buy Now Form
As for Buy Now form but when you want to retrieve items from an e-commerce database and list them repeatedly in merged Web pages.
Repeating Add to Shopping Cart Form
As for Add to Shopping Cart form but use to retrieve items from an e-commerce database and list them repeatedly in merged Web pages.
Repeating Area Use for displaying items stored in an e- commerce database but without Buy Now or Add to Shopping Cart options for the items.

Adding Dynamic Content 283
Links When to use?
Buy Now Link When directing the shopper straight to the checkout (no buying options or validation) via e-commerce button or object hyperlink.
Add to Shopping Cart Link
When the shopper is likely to buy more than one different item over the duration of a web session (and pay at the end) via e-commerce button or object hyperlink. (No buying options or validation).
View Shopping Cart Link
Use to check on your shopping cart from any point in your web pages via e-commerce button or object hyperlink.
Donation Link For charitable donations being made via the shopping cart via e-commerce button or object hyperlink. (No buying options or validation).
Subscription Link Subscribe to chargeable services or products via e-commerce button or object hyperlink. Single or repeating subscriptions are configurable. (no buying options or validation).
For adding a Cancel Subscription button or object hyperlink.
Forms or links can be selected as radio buttons from a single dialog. Remember that the term "Links" is used because an e-commerce hyperlink can be made from a vector object, image, shape or text by use of this dialog (right-click on the object and select Hyperlink...). This would be instead of a standard PayPal button. See Adding hyperlinks and anchors on p. 225 for more information.
The dialog that is displayed when you add an e-commerce object will entirely depend on the currently enabled shopping cart provider (see Configuring your Shopping Cart provider on p. 280).
Cancel Subscription Link

284 Adding Dynamic Content
The following procedures assume that PayPal is configured as your shopping cart.
To insert an e-commerce object:
Insert an E-Commerce object button on the Web Objects toolbar's E-Commerce flyout.
3. Pick an object type from the PayPal Form box. Select a "Form" radio button if you want to create an E-Commerce Form which will contain buying options (e.g., colour or quantity). If the product for sale has no buying options then you can use a "Link" object (i.e., to create a clickable E-Commerce Button). Repeating form and area options let you add items from a database rather than defining them explicitly in an Item Details dialog (see Using database merge with e-commerce on p. 297).

Adding Dynamic Content 285
Choose from the above settings and click Next>. If you're using e-commerce database merging, this Item Details dialog will instead let you choose an e-commerce database for use with your chosen provider. Remember to set the currency you wish to trade in.

286 Adding Dynamic Content

Adding Dynamic Content 287
To insert the form or button, position the cursor where you want it to appear on the page, then simply click the mouse.
To edit an e-commerce form or button:
To convert to a standard form:
Database merge means extracting the data contents of an existing database (Serif databases .SDB, Microsoft Access, dBASE), HTML, Excel file, ODBC, or delimited text file and presenting the information—for example into a repeating area or an HTML fragment. The contents, known as the data source, could be a mailing list, personnel list, product list, inventory, sales list. In fact any information which is suitable for storage.

288 Adding Dynamic Content
As well as text, it is even possible to merge picture data (for example, a digital photo library) into single fields or even auto-create a grid layout of pictures and text suitable for catalogs or photo albums. WebPlus can even create a photo database automatically—a simple database using the .SDB (Serif Database) format—for a set of images in a folder. You can merge images into single fields or even auto-generate a repeating layout with a grid arrangement suitable for catalogs or photo albums.

For your basic database merge needs, WebPlus provides its own Serif Database file format. "SDB files" as they're called (since they use the *.SDB extension) are ideal for storing unformatted, plain text data typically used for product lists, but are suitable for other tasks as well. You can build a list by creating a new SDB file and then "fill in the blanks." One advantage of using the Serif Database format is that you can edit your data (even add new fields and information) directly within WebPlus. Of course, more complex data sources have their own advantages, and WebPlus can also merge external data from a variety of other formats. You can import plain text files (for example, as exported from a email program), tables from HTML Web pages, database files from programs such as Access, Outlook, Excel... even live ODBC servers!
Whatever your source of data, once you've chosen it in WebPlus you can edit the merge list (the actual data to be merged) by specifying which records to include or exclude, and apply advanced filtering/sorting capabilities to refine the data. You'll need to Insert placeholder fields on a placed repeating area on your Web page; data will then be merged into such repeating areas.
Overview

Adding Dynamic Content 289
In no time, you'll be ready to Merge such that each repeating area is "regenerated" multiply within a new Web site with data from each record appearing in turn.
As more advanced merging features, you can use merge anchors to hyperlink between summary and main pages for each record. Additionally, merge fields can be inserted into generated page titles to allow navigation between summary lists/main pages. See Database merge additional features on p. 303.
In e-commerce, it's possible to use database merging using an e-commerce Serif database and repeating Buy Now forms or repeating Add to Shopping Cart forms. Repeating areas can also be used but e-commerce forms offer transactions directly with your shopping cart provider (e.g., PayPal, Mal's, etc.) in the form of Buy Now/Add to Shopping Cart buttons. (See Using database merge with e-commerce on p. 297).
Creating a data source
You can create a new Serif Database (*.SDB) file easily within WebPlus. This database, once populated, can be used as your data source which can be merged into your Web page.
To create a new Serif Database (*.SDB) file:
Create Database from the Database Merge toolbar (switch on first).

290 Adding Dynamic Content
WebPlus lets you create your own photo databases for showcasing
digital art—EXIF data is also stored. See WebPlus help for more details.
Inserting repeating areas for your data
For merging to work correctly you'll need to include the contents of your data source on a Web page. WebPlus assists by allowing you to quickly create a repeating layout that arranges placeholder fields, generating a new document with as many pages as needed and populating the fields with text or images from a specified data source. You can create any number of data sources, but can only have one open at a time per repeating area.
Each repeating area has its own data source; only one repeating
area can occupy each Web page.

A repeating layout starts with a repeating area—basically a single cell whose unit size determines how many database records can tile across and down on a page. Within the repeating area, you can place any elements, such as:
You take care of creating the repeating area and placing the fields (or other elements), while WebPlus takes care of replicating them into a repeating grid

Adding Dynamic Content 291
layout and merging text or pictures from your data source into a new Web site. Each repeating area is "regenerated" multiply within the new Web site, with data from a different record appearing in turn.
To create a repeating layout:
Insert Repeating Area button on the Database Merge toolbar (switch on first).
When you save a Web site, WebPlus "remembers" the current data source and reopens it "behind the scenes" automatically the next time you open the Web page—so as long as you're using the same source, you won't need to reopen it yourself.

292 Adding Dynamic Content
To edit an existing repeating layout:
button on the context toolbar.
Opening a different data source
As well as creating a Serif database file, WebPlus will also let you open a different already existing Serif database file or other external data source such as plain text file (comma-delimited or fixed-width), other database, spreadsheet, and more. You can edit, select, filter, and/or sort the actual data to be merged.
To open a different data source:
button on the context toolbar.

Adding Dynamic Content 293
Editing Serif Database files
Each record in a Serif Database (*.SDB) file contains 20 standard fields. For data stored in .SDB format, you can use the Edit Database dialog to create or delete records, enter information, find occurrences of specific text, or revise the field order—even add new fields and data.
Other database files are not editable.
To edit a Serif Database (*.SDB) file:
button on the context toolbar.

294 Adding Dynamic Content
Closing the Edit Database dialog does not close the database file; it
remains the active data source for database merge purposes. However, any changes you've made are saved to disk at this time.
Inserting placeholders for your data
In order to merge information from a structured data source into a Web page, you need to insert placeholder fields into your created repeating area (see above) so WebPlus knows which fields' data to use. There are actually two kinds of placeholders. Text fields obviously handle text-based information like address list data; picture fields will add images retrieved from stored file path names in your database.

Adding Dynamic Content 295
To insert a text or picture field placeholder:
Insert Picture Field button on the context toolbar. A dialog appears, displaying a list of fields (text or picture) in the currently selected data source.
Insert Text Field or
4. Drag each field so that it is placed exactly within your repeating area— resize if necessary. There's a subtle "locking moment" (with Snapping either on or off) when the field attaches to the repeat area. The field's contents turn shaded and subsequently, dragging the repeating area object also drags its contents. For picture fields, set display properties such as picture size and alignment within the picture field, right-click the field and choose Frame Properties.... Typically, the Scale to Minimum Fit option works best for Picture fields. You can also resize the frame itself by dragging its handles.
Selecting, filtering, and sorting the merge list
Whatever kind of data source you're using, at any time you can view the current data in row/column format, with the option of customizing the merge list (the actual data to be merged) by including or excluding specific records. You can do this "by hand" or preferably by applying powerful filtering and sorting options that let you include just certain records, or arrange records in order, based on the contents of specific fields. For example, with an address list or contact database you could sort by postal code and then by last name.

296 Adding Dynamic Content
To edit the current merge list:
button on the context toolbar.
Once you've selected which records to merge (your merge list) and inserted all necessary placeholders as detailed above, you're ready to merge your database content to a temporary Web site, and then publish.
To merge to a new Web site:
button on the context toolbar.
2. WebPlus now generates a new Web site in a separate window, replicating the basic repeating area as many times as there are records in the data. The layout uses the grid arrangement you specified, with each unique cell including data from a single record, following the order of records in the merge list. WebPlus inserts new pages as needed to include all the records. Note that the repeating area is no longer present; it's been converted to a grid layout using merged data rather than placeholder fields.
Should you need to adjust display properties such as picture size
and alignment for any individual picture frame, right-click the frame and choose Frame Properties....
The original Web site remains open in its own window. Don't forget to save it in case you need to repeat the merge process with another data set! If you're not happy with the resulting Web site, simply return to the original, make adjustments, and repeat the merge process.
Merging and publishing

Adding Dynamic Content 297
To publish your Web site:
With your merged site currently active, choose Publish Site> on the File menu and select Publish to Web (see p. 322).
By default, merging will take place automatically before you
publish; if you don't want to merge each time, uncheck Merge before publishing in the Publish to Web dialog.
Basic database merges can be used for presenting text, images or a combination of both as display-only data, e.g. lists, galleries, etc. However, when used in conjunction with a more interactive feature such as repeating e- commerce forms, it is possible to create e-commerce solutions that are driven by e-commerce data sources containing saleable items. The database, which must be a Serif database file (.SDB), must adopt a field structure specific to your chosen shopping cart provider (e.g., PayPal) and can store item name, description, item image, price, quantities, shipping costs, and other buying options (colour, size, etc).
Typically, a specific type of e-commerce form can be added to the page which will allow e-commerce transactions to be performed. For single item purchases, a Repeating Buy Now Form takes the user straight to checkout, while multi-item purchases use a Repeating Add to Shopping Cart Form. As both forms are repeating, the form is "regenerated" multiply within a new merged Web site with data from each item record appearing in turn. See Inserting an e-commerce object (PAYPAL) on p. 281 for more information.

298 Adding Dynamic Content

Instead of a repeating form, a Repeating E-Commerce Area can be placed on the Web page. This is essentially a display-only version of the above forms without the Buy Now or Add to Shopping Cart buttons, i.e. you can view items but not buy them.
As with basic database merges, e-commerce database merging can make use of merge lists to select, filter, and/or sort the actual data to be merged. Once a merge list is defined, merging and publishing can be performed. (See Merging and publishing on p. 296).
Creating an e-commerce data source
You can create an e-commerce database within WebPlus by choosing a shopping cart provider and choosing provider-specific database fields. This database, once populated with item records (i.e. the things you want to sell), can be used as your e-commerce data source which can be merged to a new Web site.

Adding Dynamic Content 299
To create a new e-commerce database:
Create E-Commerce Database from the Database Merge toolbar (switch on first).
To edit your e-commerce database, see Editing Serif database files on p. 293.

300 Adding Dynamic Content
Inserting e-commerce forms and repeating areas
If you plan to work with e-commerce, you can choose to work in two ways. Either using repeating e-commerce forms or repeating e-commerce areas. The former offers interactivity with your shopping cart provider, i.e. the user can access PayPal to perform the transaction. The latter does not interact with the provider so can be used only for displaying items.
To insert a repeating e-commerce form:
Insert an E-Commerce object button on the Web Objects toolbar's E-Commerce flyout. OR
Insert Repeating E-Commerce Form from the Database Merge toolbar (switch on first).
Select

Adding Dynamic Content 301
To insert the form or button, position the cursor where you want it to appear on the page, then simply click the mouse. The form is placed on the page with fields positioned in their default location (according to the chosen form layout above).

302 Adding Dynamic Content
When you save a Web site, WebPlus "remembers" the current data
source and reopens it "behind the scenes" automatically the next time you open the Web page—so as long as you're using the same source, you won't need to reopen it yourself.
To edit a repeating e-commerce form:
Optionally, you can modify the look and feel of your form object in the page. Each form field can be moved, resized or deleted according to requirements.
Avoid dragging a form field away from its form object. Doing so
will prevent the field from repeating.
To create a repeating e-commerce area:
Insert Repeating E-Commerce Area button on the Database Merge toolbar (switch on first).

Adding Dynamic Content 303
The use of database merging, whether using e-commerce or not, is enhanced by using some additional features. These features may offer differing ways of presenting record data or improve the navigability of merged pages, especially between summary/full description pages.
Adding repeating HTML fragments
Repeating areas can be used to create simple drop-down menus, perhaps listing products, options, or email addresses (below) derived from a database. You can apply scripting to each option to initiate some action.

Remember that for combo boxes with a limited set of options you can use WebPlus forms instead (see p. 255).
To add a repeating HTML fragment:
Insert Repeating HTML Fragment from the Database Merge toolbar (switch on first).
You'll see the Paste cursor. What you do next determines the initial size and placement of the HTML fragment. To insert the HTML fragment area at a default size, simply click the mouse. OR To set the size of the area, drag out a region and release the mouse button.

304 Adding Dynamic Content
button on the context toolbar to link to a database.

See Attaching HTML code on p. 249 if you need to brush up on HTML editing.
Merge anchors can be used when hyperlinking between an item name in a simple summary list to its associated full description page. The named anchor is created on the repeating area/form on the full description page which allows a hyperlink (created in the Hyperlinks dialog; below) to be made. See Adding hyperlinks and anchors on p. 225.
Adding merge anchors

Adding Dynamic Content 305

Once the database is merged to a new Web site, the merged pages maintain the summary/full description links for each record stored in the database. To do this, the Same record as origin of link option has to be selected for the hyperlink's anchor (e.g., FullDesc).
For page navigation between next or previous records, the Next record after origin of link or Previous record after origin of link option can be selected with the anchor when defining the hyperlink (e.g., a Next link) between full description Web pages.
In the example above, you may have noticed an unusual looking field {MM:ItemName} as the Page name. This is a merge field which can be inserted into full description Page names to correctly reference the item name in the page title. The field can also be used to declare fields in repeating HTML fragments.
Adding merge fields

306 Adding Dynamic Content
To add a merge field:
Insert merge field button at your chosen insertion point.
After merging, each merged full description page will be correctly titled with the currently viewable item.
It's quite common for Web developers to "inherit" content from existing web sites to save time and effort, while bearing in mind any legal implications in doing so. This is fine for simple graphic or text copying, but this process is not possible for more complex, interactive objects such as counters, shout boxes, blogs, etc, which collect information with the object. The power of, for example, a hit counter lies in its ability to keep a count of the number of users that have visited a page at all times. The count needs to be stored somewhere and herein lies the problem. Storing object data (counts, chat text, blog text, is not always encouraged or even supported on ISP web space—due to potential security breaches and disk usage demands. So where can the data be stored?
To resolve the problem for Serif WebPlus users, WebPlus can place such server-sided objects, called Smart objects, on the page and also store associated object data on Serif's own secure server space. These objects are available from Serif Web Resources, a secure online service for obtaining objects and storing data at the same time. All Smart objects operate with a range of languages.
An advantage of using Serif's Smart objects is that they are optimized and fully tested for use in your current WebPlus project. In addition, the objects are hosted online so new updates may be added over time without having to load WebPlus and republish parts of your site.

Adding Dynamic Content 307
Let's look at each Smart object you'll find in Web Resources and what you can do with them.
Control site accessibility by using user lists or user groups.
See Access Control on p. 70 for more details.
Use to show how many people are currently viewing the web page.
Blog A blog (short for weblog) acts as a personal journal on your web page which hosts your own published articles in an easy-to-use RTF editor. Articles can be commented on by visitors to the Web page. With blogs you can:
Name Use · Access Control · Active Viewers

308 Adding Dynamic Content
Forum Add a thread-based discussion forum to your Web site, optionally in a full-sized window. With forums you can:
Users can view number of topics, posts, and last post submitted, and obviously post to the forum.
For an in-depth look at forums, follow the Adding a Forum to your Site tutorial on the WebPlus Resource CD (if purchased).
A straightforward count of the number of hits on the current page (reset as needed). Different styles can be adopted.
Have web site visitors sign up to newsletters, party confirmations, information request, and many more. After the visitor confirms addition to the mailing list by return email, the email address is stored with other subscribers for future correspondence.
News Add a news window onto your page. The object supports RTF editing as well as paragraph styles, hyperlinks, inserted media, and even HTML source editing.
Poll Set up an online poll to canvass web visitor's opinions.
Hit Counter · Mailing List

Adding Dynamic Content 309
Shout Box Acts as an interactive chat window similar to Windows Messenger. Let your web visitors chat amongst themselves.
Analytics Collect and display Web usage statistics via the Web Analytics. This is enabled via Site Properties (see p. 55) and cannot be added to the page.
For security reasons, the objects are only available via a Serif Web Resources login accessible from within WebPlus. If you don't have a valid username and password you must create a Web Resources account first.
To create a Serif Web Resources account:
Smart Object Tool button on the Web Objects toolbar.

310 Adding Dynamic Content
To clear Account details:
To access Web Resources:
Smart Object Tool button on the Web Objects toolbar.
Think of a Smart object as being a general term for elements that you'll use on your page—as discussed previously. Smart objects are not added directly to the page from Serif Web Resources, but are first added to your own object library (the library lets you manage and edit each object)—objects can then be added to the web page immediately or at a later date.
Some Smart objects are conditional on another Smart Object being
created first. An example is the Forum Smart Object which requires the Access Control object to be created first.
To add an object to the library:
Creating Smart objects

Adding Dynamic Content 311
For detailed help on the options available for each Smart object,
use the context-sensitive Help button in the Create dialog.
The named object will be shown in a list in the My Smart Objects left-hand pane. Here's an example of all Smart objects , i.e.

All Smart objects can be added to the page, but sometimes it makes sense for some Smart objects (i.e., forums and blogs) to not be added to a Web page and instead access Serif Web Resources directly (via offsite links or hyperlinks; see p. 38 or p. 225, respectively). The main advantage is that there is no constraint by having the forum or blog contained within your page dimensions (avoiding window scrolling).

312 Adding Dynamic Content
To add a Smart object to your web page:
To insert the object at a default size, position the cursor where you want the object to appear on the page, then simply click the mouse.
The Smart Object will automatically preview on the page so you'll get a good feel for how your published Smart object will look.
Once an object is created it can be edited either in the My Smart Object Library or directly on the page. Typically, you might want to alter the appearance of the object from its original settings, maybe change a Poll question, or reset a Hit Counter back to zero.
Editing an object only affects the object itself and does not alter any collected data.
The dialog options for editing and creating a Smart object are the same, except that the object's Name is read only (shown as greyed out) in the object edit dialogs.
To edit a Smart object in your library:
Smart Object Tool button on the Web Objects toolbar (and login if necessary).
button under the object preview.
The selected object's edit dialog is displayed. For detailed help on the editing options available on each Smart object, use the context-sensitive Help button in the Edit dialog.
To edit a Smart object on your page:
Editing Smart objects

Adding Dynamic Content 313
If you edit an object on the web page the change is also reflected
in the Objects library and vice versa.
While editing Smart objects affects how the object operates, managing Smart objects can be used to manage the object's "gathered" data when the Web page is published. Some Smart objects such as Hit Counters don't need to be managed as they just increment on each web visit (you can reset the counters though). However, other more complex Smart objects, such as forums/blogs, mailing lists, polls, and shout boxes will store articles, email addresses, poll results, and a chat messaging log, respectively.
For detailed help on the management options available, use the
context-sensitive Help button next to the Smart object.
To manage a Smart object from your library:
Smart Object Tool button on the Web Objects toolbar (and login if necessary).
button under the object preview. The next step depends on the object type, i.e.
Reason for object management
Control site accessibility by using user lists or user groups.

314 Adding Dynamic Content
Blog Add, edit, or delete articles. Add and manage comments associated with articles. Pick an Editor group for multi- author article publishing.
For new article (or ones for edit) you can create/edit your article in RTF, add tags, pick article poster, allow trackbacks, and make comments

Adding Dynamic Content 315
Forum Manage forum with respect to privacy, category/subforum control, moderation, theme, and user ranking (most posts, special rank such as Site Supporter).

316 Adding Dynamic Content
Remove a web visitor's email address (or all email addresses), save to a delimited text file (CSV), or synchronize gathered email addresses with an Access Control Smart object.
News To update the news article. • Edit the text as for any RTF word processor, then click the Save button.
Poll Zero the votes for a specific voting option or reset entire poll.
Removal of unwanted text lines.
Analytics View Web page statistics such as number of visits, browsing environments, referrers, and most submitted search terms.
Mailing List · Shout Box

Adding Dynamic Content 317
To manage Smart objects directly over the Internet:
To delete an object from the library:
This will cause any uploaded web page which includes the object to display an empty space until the object is removed from the corresponding WebPlus's web page and the web site uploaded again.
To delete an object on your page:
Deleting Smart objects

318 Adding Dynamic Content

to Web

320 Previewing and Publishing to Web

Previewing and Publishing to Web 321
Previewing your site in a Web browser is an essential step before publishing it to the Web. It's the only way you can see just how your site will appear to a visitor. You can preview a page or site at any time, either within WebPlus (using an internal window based on the Internet Explorer browser) or separately using any browser installed on your system.
To preview your Web site:
HTML Preview button on the Standard toolbar.
When previewing in a window, you can use the Preview context toolbar to control the preview window. Click the toolbar buttons to navigate Back and Forward, Refresh or Close Preview, and redisplay the page at one of several standard or custom screen resolutions (all from a drop-down menu).

322 Previewing and Publishing to Web
To customize the list of browsers on the submenu:
It is good practice to install several of the common browsers in
order to test how your site will look on an alternative system.
Publishing to the Web involves uploading your completed Web project to your Web host provider, turning your project into a live Web site, viewable by the whole world! You can specify that all Web pages are published or, if updating your site, only pages changed since the last "publish."
Before publishing to the Web, it is worth checking for potential problems by running the Site Checker (Tools>Site Manager>Site Checker...).
Remember that you can publish to disk folder at any time, which
lets you test your Web site offline (and locally) before publishing to Web. See online Help for more details.

Previewing and Publishing to Web 323
To publish your site to the Web:
Publish to Web button on the Standard toolbar (or choose Publish Site from the File menu and select Publish to Web... from the submenu).
If this is your first time publishing to the Web, you'll see a Publish to Web dialog without any account information present (you'll see your local Web site ready to upload). You'll need to set up at least one account before you can proceed. See the Accessing your free Web space tutorial for more information on ISP hosting.

324 Previewing and Publishing to Web
You can also use the dialog at this point to Add... another account, and Copy..., Edit or Delete an account selected from the drop-down menu. It's a good idea to test your new or modified account by clicking the Test button—a dialog showing Web site details is displayed if the test is successful.

Previewing and Publishing to Web 325
11. If uploading for the first time, selected files will be uploaded directly. OR If uploading to an existing site, an Uploading Files dialog is displayed showing local file action (whether files will be added (Add), will replace the live file (Replace) or not updated (Leave)). In the dialog, check the option to Delete unused remote files if you want WebPlus to automatically remove any unused graphic and page files. Select either the Incremental Update or Full upload Button. Choose the former to upload only files that have altered since the last upload. When doing an incremental update, you can get WebPlus to Check for missing files by checking the option box. However, as this can dramatically slow the upload, this option is unchecked by default. You'll see a message when all files have been successfully copied. Click OK.
If you rename/delete files and then republish one or a few pages to the Web, the old files are not deleted automatically so you'll need to delete these manually by using Publish Web Site>Maintain Web Site... on the File Menu. However, if you republish the whole site to the Web automatically (using Automatic Operation), you can choose to delete any unused files; check the Delete unused files check box.
If you have a very large Web site, you may want to use the Automatic Operation feature. The actual process is virtually the same but it allows you to upload the site without having to "OK" each dialog that may appear. This is especially useful if you are updating a site containing a large database with images.

326 Previewing and Publishing to Web
After publishing your Web site, you may find that some changes are missing. Before you attempt to do another upload, try clearing the cache on your browser. To clear the cache, press Ctrl+F5. This will often cure any problems relating to the display of images and other objects.
If clearing the cache doesn't resolve the problems, you may need to manually delete old image files or objects. See Maintaining your Web site in online Help.
Once your site has been published, you have the option to
View Site Online on the Standard toolbar. This displays your site in its most recently published state in the default web browser. The first time View site online is used, a dialog pops up asking for the default site URL. This can be amended later using the Site Properties... dialog.
It is important to remember that any changes made since publishing will not be reflected. To see unpublished changes, use HTML Preview button. (See Previewing your Web site on p. 321).













Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.