Instruction/ maintenance manual of the product PEX220A Bosch
Go to page of 10
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen www.bosch-pt.com 1 609 929 M15 (2007.11) T / 106 PEX 220 A de Originalbetriebsanleitung en Original instructions fr Notice original.
| 3 Bosch Power Tools 1 609 929 M15 | (5.11.07) 1 2 3 4 OBJ_BUCH-500-001.book Page 3 Mo nday, November 5, 2007 8:33 AM.
1 609 929 M15 | (5.11.07) Bosch Power Tools 4 | 1 2 6 2 7 Ø 19 mm 2 5 3 8 4 9 5 2 2 608 601 175 C B A4 A3 A2 A1 OBJ_BUCH-500-001.book Page 4 Mo nday, November 5, 2007 8:33 AM.
1 609 929 M15 | (5.11.07) Bosch Power Tools 14 | English en General Power Tool Safety Warnings Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
English | 15 Bosch Power Tools 1 609 929 M15 | (5.11.07) 4) Power tool use and care a) Do not force the power tool. Use the cor- rect power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de- signed.
1 609 929 M15 | (5.11.07) Bosch Power Tools 16 | English Product Features The numbering of the produc t features refers to the illustration of the machine on the graphics page.
English | 17 Bosch Power Tools 1 609 929 M15 | (5.11.07) Assembly f Before any work on the machine itself, pull the mains plug. Selecting the Sanding Sheet Depending on the material to be worked and t.
1 609 929 M15 | (5.11.07) Bosch Power Tools 18 | English Replacing the Sanding Plate (see figure B) Note: Replace a damaged sanding plate 3 immediately. Pull off the sanding sheet. Unscrew the four screws 8 completely and remove the sanding plate 3 . Attach the new sanding plate 3 and tighten the screws again.
English | 19 Bosch Power Tools 1 609 929 M15 | (5.11.07) Sanding Plate Brake An integrated sanding plate brake reduces the stroke rate when running at no-load so that scor- ing is prevented when placing the machine onto the workpiece.
1 609 929 M15 | (5.11.07) Bosch Power Tools 20 | English WARNING! Important instructions for connect- ing a new 3-pin plug to the 2-wire cable. The wires in the cable ar e coloured according to the following code: Do not connect the blue or brown wire to the earth terminal of the plug.
An important point after buying a device Bosch PEX220A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch PEX220A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch PEX220A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch PEX220A you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch PEX220A will certainly help you make a decision on the purchase.
If you already are a holder of Bosch PEX220A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch PEX220A.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch PEX220A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch PEX220A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
