Instruction/ maintenance manual of the product KA88 Black & Decker
Go to page of 12
KA88.
2 English (Original instructions) 5.
3 C D E F B A.
4 G.
5 Intended use Y our Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only . Safety instructions General power tool safety warnings @ Warning! Read all safety warnings and all instructions.
6 cutt ing tool s wi th s harp cut ting edg es a re l ess like ly t o bi nd and are easier to control. g. Use the power tool, accessories and tool bits etc., in acco rdan ce w ith thes e in stru ctio ns, taki ng i nto acco unt the working conditions and the work to be performed.
7 Labels on tool The following pictograms are shown on the tool: : Warning! T o reduce the risk of injury , the user must read the instruction manual. Electrical safety # This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
8 Hints for optimum use u Always hold the tool with both hands. u Do not exert too much pressure on the tool. u Regularly check the condition of the sanding belt. Replace when necessary . u Always sand with the grain of the wood. u When sanding new layers of paint before applying another layer , use extra ne grit.
9 EC declaration of conformity MACHINERY DIRECTIVE % KA88 Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-4 For more information, please contact Black & Decker at the following address or refer to the back of the manual.
10.
1 1 ENGLISH Do not forget to register your product! www.blackanddecker .co.uk/productregistration Register your product online at www.blackanddecker .co.uk/productregistration or send your name, surname and product code to Black & Decker in your country .
90563935 REV -0 03/2010 Australia Black & Decker (Australia) Pty . Ltd. T el. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker T el. +64 9 259 1 133 5 T e Apunga Place Fax +64 9 259 1 122 Mt Wellington Auckland 1060 United Kingdom Black & Decker T el.
An important point after buying a device Black & Decker KA88 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Black & Decker KA88 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Black & Decker KA88 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Black & Decker KA88 you will learn all the available features of the product, as well as information on its operation. The information that you get Black & Decker KA88 will certainly help you make a decision on the purchase.
If you already are a holder of Black & Decker KA88, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Black & Decker KA88.
However, one of the most important roles played by the user manual is to help in solving problems with Black & Decker KA88. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Black & Decker KA88 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center