Instruction/ maintenance manual of the product VG5 800 SERIES Bosch Appliances
Go to page of 123
AutoDome 800 Series HD PTZ Camera VG5 800 Series en Installation Manual.
.
AutoDome 800 Series HD PTZ Camera Table of Cont ents | en 3 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 T able of Contents 1S a f e t y 7 1.1 Important Safety Instructions 7 1.2 Safety Precautions 9 1.3 Important Notices 9 1.
4 en | Table of Cont ents AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 5 Alarms and Relay Connections 54 5.1 Alarm Inputs 54 5.2 Connecting Alarms (inputs 1 or 2) 54 5.2.1 Connecting a Normally Open Alarm 54 5.
AutoDome 800 Series HD PTZ Camera Table of Cont ents | en 5 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.23 Lens Settings 86 7.24 PTZ Settings 87 7.25 Diagnostics 88 7.26 Preposition and Tours 89 7.27 Sectors 89 7.
6 en | Table of Cont ents AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. A Keyboard Commands by Number 116 Index 117.
AutoDome 800 Series HD PTZ Camera Saf ety | en 7 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1S a f e t y 1.1 Impor tant Safety Instructions Read, follow, and retain for future reference all of the following safety instructions.
8 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconne ct the power from the cable to be installed into the unit.
AutoDome 800 Series HD PTZ Camera Saf ety | en 9 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1.2 Safety Precautions 1.3 Impor tant Notice s Accessories - Do not place this unit on an unstable s tand, tripod, bracket, or mount.
10 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. – Disconnect the unit's input connectors fr om outdoor equipment before disconnecting the grounding plug or grounding terminal.
AutoDome 800 Series HD PTZ Camera Saf ety | en 11 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Power lines - Do not locate the camera near overhe ad power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights.
12 en | Safety AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. destinées à fournir une protection raisonn abl e contre les interférences nuisibles quan d l'appareil est utilisé dans une installation comm e rciale.
AutoDome 800 Series HD PTZ Camera Saf ety | en 13 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1.4 Customer Support and Ser vice If this unit needs service, contact the near est Bosch Security Systems Service Center for authorization to return and shipping instructions.
14 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 2 Installing the P endant Arm Wall, Corner , and Mast (P ole) Mounts 2.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 15 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 2.1.2 Description This chapter details how to install an AutoDome Pendant Arm to a wall, a corner, or to a mast (pole).
16 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 17 Bosch Security Systems, Inc. Installa tion Manual F .
18 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4. Attach the supplied 3-pin Power Plug to th e incoming power wires.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 19 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 2.4.1 Power Supply Box Connections The following figure is a detai led illustration of the Pendan t Arm Power Supply Box, which includes the fuse specifications.
20 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 21 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 To properly wire the incoming high voltage and the outgoing low voltage lines, refer to this table: Ta b l e 2 .
22 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6. Route the 24 VAC outgoing power supply wires into the VG4-PA0 power supp ly box through the conduit fitting on the left side of the box.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 23 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. Compress the bottom hinge pin by pushin g the pin lever downward and rotating it behind the Hinge Pin Stop.
24 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 25 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6. Connect the 3-pin Power In Pl ug, installed previously, to its matting connector P101 on the left side of the box.
26 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 27 Bosch Security Systems, Inc. Installa tion Manual F .
28 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 2.13 Pend an t Ar m Cab le s 1. R oute all incoming wires through on e of the conduits at the bo ttom of the Mounting Plate.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 29 Bosch Security Systems, Inc. Installa tion Manual F .
30 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 12. Connect the Earth ground wire, if availabl e, to the crimp ring terminal inside the Mounting Plate.
AutoDome 800 Series HD PTZ Camera Installing the Pendant Arm Wall, Corner , and Mast (Pole) Mounts | en 31 Bosch Security Systems, Inc. Installa tion Manual F .
32 en | Installing the Pendant Arm W all, Corner, and Ma st (Pole) Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4. Hold the Pendant housing in position whil e tightening the two (2) 5-mm Allen head mounting screws on top of the housing to 10-12 N-m (90-105 in.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 33 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3 Installing Roof Parape t and Pipe Mounts 3.1 Unpacking This equipment should be unpacked and handled with care.
34 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3.2 Pre-installation Check Li st 1. Determine the location and distance for th e powe r supply box based on its voltage and current consumption.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 35 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.
36 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3.3.1 Attach Cover Door 1. Compress the bottom hinge pin by pushing the pin lever down and then rotate it behind the Hinge Pin Stop.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 37 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4 Route Wire s and At tach Connectors Power wires must be routed to the left (fro nt) side of the Power Supply Box through a separate conduit.
38 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 39 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4.1 Wiring the Power Supply Box 1. Route the high voltage 115/230 VAC lines throug h the conduit fitting on th e left side of the box.
40 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 41 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.4.3 Power Supply Box Connections The following figure is a detaile d illustration of the Roof or Pipe Mount Power Supply Box, which includes the fuse specifications.
42 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Ta b l e 3 . 1 P ower Supply Bo x Connections 3.5 Installing the V G4-A-9230 Roof Par ape t Mount This section details the installation steps for the Roof Parapet Mount.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 43 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 3. 6 Parape t Wall Mount Bracket and Roof Mo unt Plate 3. Apply a weatherproof sealant around each fastener hole at the mounting surface.
44 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 3. 7 VG4-A-9230 Parape t Mount 7. Fold the Ethernet and power wires back at th e front end of the arm and route them down and out through the Down Pipe.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 45 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 12. Proceed to Section 3.7 Wire the Pipe Interf ace Board, pa ge 46 . 3.6 Installing the VG4-A-9543 Pipe Mount This section details the installation steps for th e VG4-A-9543 Pipe Mount.
46 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7. Thread the Pipe Cap onto the down pipe and tighten securely to prevent leaks. See Figure 3.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 47 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.7.1 Connecting Wires to the Pipe In terface Board The Pipe Interface Board contains all of the connectors for control, data, image, and power wires.
48 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 3.11 Alarm and Relay Connect or Plugs Note: There is a slot located at the top of the In terface Board to tie the wires to the circuit board with a cable tie.
AutoDome 800 Series HD PTZ Camera Installing Roof Parapet and Pipe Mounts | en 49 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 3.8 Attach Pendant to Pipe and Tighten 1. Before attaching the Pendant, visually insp ect the Pendant dome an d the Interface Board connectors for any blo cked pin holes and bent pins.
50 en | Installing Roof Parapet and Pipe Mounts AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3. Drop the Pe ndant down slightly to engage the dome hook and hinge pin of the Dome Cap, allowing the dome to rotate around the hinge pin.
AutoDome 800 Series HD PTZ Camera Cable and Wire Standards | en 51 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 4 Cable and Wire S tandards 4.1 Po wer 4.2 Wire Distance Guide for P endant Ta b l e 4 . 1 Ma x i mu m W i re D i s t an c e s fr o m Pow e r S u p p ly to A u to D o m e 4.
52 en | Cable and Wire Standar ds AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 4.4 Audio Cables The AutoDome 800 Series is capable of rece iving line input audio signals and transmitting it over a network.
AutoDome 800 Series HD PTZ Camera Cable and Wire Standards | en 53 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1 Audio- (C-) 7 AutoDome Data In/Out 2 Audio+ (C+) 8 P105/P106 Connector 3E a r t h G r o u n d 9 A u d i o O u t 4R x D 5 TxD 6S i g n a l G r o u n d NOTICE! See Section 7.
54 en | Alarms and Relay Connections AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 5 Alarms and Rela y Connections 5.
AutoDome 800 Series HD PTZ Camera Alarms and Relay Connections | en 55 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Figure 5. 2 N.C. Norma lly Closed Non-supervised Connections 2. From the Alarm Connections page on the Settings Page ( Section 7.
56 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6 Using the AutoDome 800 Serie s The AutoDome 800 Series transmits PTZ control commands and images over a TCP/IP network.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 57 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 If you choose to use a computer running Micros .
58 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Figure 6. 1 AutoDome 800 Series Syst em Configuration 6.4 Configuring the AutoDome 800 Series Camera To operate the camera in your network you must assign it a valid network IP address.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 59 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6.4.1 Changing the Network Settings The AutoDome 800 Series has a default IP address of 192.168.0.
60 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 8. Click the Set button to save the settings. 9. Launch another instance of Microsoft Internet Explorer.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 61 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 6.5.2 Guidelines for Implem enting Intelligent Tracking Factors such as the viewing angle and unwant ed motion (from trees, for example) may interfere with Intelligent Trac king operation.
62 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Maximum Number of Connections If you do not connect, the unit may have reached its maximum number of connections.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 63 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. To control a peripheral, cl ick the appropriate controls. 2. Move the mouse cursor over the video image.
64 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. If you want to delete the entries, click the de lete icon in the top ri ght-hand corner of the relevant field.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 65 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 To View a Preset Shot: 1. Click the number of the scene you want to view using the on-screen keypad.
66 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Scan 360 Click this button to start a continuous 360° pan. To stop the continuos pan, click a directional control in the View Control tab.
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 67 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can obtain additional inform ation to help when you troublesh oot or fine-tune the unit.
68 en | Using the Aut oDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 6.10 Recordings page Click Recordings to access the Recordings page from the Livepage or Settings page (the Recordings link is only visible if a st orage medium has been selecte d).
AutoDome 800 Series HD PTZ Camera Using the AutoDome 800 Series | en 69 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Set bookmark Jump to the following bookmark Bookmarks are only valid while in the Reco rdings page; they are not saved with the sequences.
70 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7 Configuring the AutoDome 800 Series The SETTINGS page provides access to the configuratio n menu, which contains all th e unit's parameters arranged in groups.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 71 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Password An AutoDome 800 Series is generally protected by a password to prevent unauthorized access to the unit.
72 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 73 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – HD low bandwidth Target bit rate: 2500 kbps Maximum bit rate: 5000 kbps Encoding interval: 30.
74 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Storage medium 1. Select th e required storage medium from the list. 2. Click the Start button to start the recording immediately.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 75 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Password The AutoDome 800 Series operates wi th three authorization levels: service , user and live .
76 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. Firs t check whether the correct time zone is sele cted. If it is not correct, select the appropriate time zone for the system, and click the Set button.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 77 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.
78 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Website language Select the language for the user interface here. Company logo Enter the path to a suitable graphic if y ou want to replace the manufact urer's logo.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 79 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Show event log The event messages are displayed along with the date and time in a field next to the video image.
80 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. SC Settings Click the Default button to restore all camera settings to their original defaults.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 81 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – DSL Target bit rate: 400 kbps Maximum bit rate: 500 kbps Encoding interval: 30.00 ips – ISDN (2B) Target bit rate: 80 kbps Maximum bit rate: 100 kbps Encoding interval: 30.
82 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Encoding Interval The figure selected here determines the in terval at which images are encoded and transmitted.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 83 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 SD stream options (use these options if a second H.264 stream is allowed): – H.264 BP+ bit-rate-limit ed Select this setting when using hardware de coders.
84 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. – Picture quality : his setting allows you to adjust th e image quality. Use the slide bar to choose a quality between Low and High.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 85 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 – Sodium Lamp Auto: Automatically adjusts for sodium vapor light to restore objects to their original color.
86 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. High Sensitivity Setting Night Mode Selects night mode (B/W) to enhance lighting in low light scenes.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 87 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Iris Polarity Capability to reverse the operation of the iris button on the controller. – Normal (default) : iris controls operate normally.
88 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Autopan Right Limit Sets the right Auto Pan limit of the camera. U se the preview window to move the camera to the right pan limit and click the button.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 89 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.26 Preposition and T ours The AutoDome 800 Series can store up to 99 pre set sce nes and this section allows you to define the individual scenes that comprise a preposition tour .
90 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. To define a title for sectors: 1. Place the cursor in the input box to the right of the sector number.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 91 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.
92 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. storage media list. In the Status column, newly added media are indicated by the status Not active .
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 93 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Standard recording Here you can select the mode for standard recordings. If you select Continuous , the recording proceeds contin uously.
94 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 95 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Time periods You can change the names of the recording profiles. 1. Click a profile and then the Rename button.
96 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. are to be possible, for example when initiating connections via higher-ranking systems such as VIDOS or Bosch Video Management System, you can store a gene ral password here.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 97 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 7.
98 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 1. To rename the file, click the icon to the ri ght of the list field and enter the new profile name in the field.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 99 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Debounce time 1 s (MOTION+ only) The debounce time is intended to prevent very brief alarm events from triggering individual alarms.
100 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. necessary for changes to occur simultaneously in a large number of sensor fields to trigger an alarm.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 101 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 1. Click Select Area to configure th e sensor fields. A new window will open. 2. If nece ssary, click Clear All first to clear the current sel ection (fields marked yellow).
102 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7.42 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 103 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 7.43 Alarm T ask Editor As an alternative to the alarm settings on the va rious alarm pages, you can enter your desired alarm functions in script form here.
104 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 3. Choose one of the following output command s for both Output 1 and Output 2 settings: – None: no defined command.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 105 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 –R e m o t e I n p u t 1 Relay Name You can assign a name for the relay here. The name is shown on the button next to Trig ger relay .
106 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 7.49.2 IPv6 Consult with the network administrator befo re making changes to the this section.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 107 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 You can activate and configure encryption of the media data (video and metadata) on the Encryption page (see Section 7.
108 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. Status The status of the DynDNS function is displayed here for in formation purposes. You cannot change any of these settings.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 109 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.
110 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 111 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Posting interval Enter the interval in seconds at which the images will be sent to an FT P server.
112 en | Configuring the AutoDome 800 Series AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. CAUTION! Before launching the firmware upload make su re that you have select ed the correct upload file.
AutoDome 800 Series HD PTZ Camera Configuring the AutoDome 800 Series | en 113 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Configuration You can save configuration data for the AutoDome 800 Series on a computer and then load saved configuration data from a computer to the unit.
AutoDome 800 Series HD PTZ Camera Bubble Handling and Cleaning | en 113 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 8 Bubble Handling and Cleaning The bubble is made of acrylic for excellent op tical clarity. Special ca re is required when handling and cleaning the bubble to avoid scratching it.
114 en | Bubble Handling and Cleaning AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. 8.2.2 Cleaning the Bubble Exterior The exterior of the bub ble is hard coated for extra protection.
AutoDome 800 Series HD PTZ Camera BVIP Fir mwar e Updates | en 115 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 9 BVIP Firm ware Updat es The AutoDome 800 Series incorporate a network video server in the IP module.
116 en | AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. A K e yboard Commands b y Number Locked A larm Rule Output Function Key Comm No.
AutoDome 800 Series HD PTZ Camera Index | en 117 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 Inde x Symbols /reset 60 A activating the recording 95 activation key .
118 en | Index AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. files JPEG 56 MPEG-4 56 firewall 96 , 106 firmware upload 111 formattin.
AutoDome 800 Series HD PTZ Camera Index | en 119 Bosch Security Systems, Inc. Installa tion Manual F .01U.273.797 | 5.0 | 2012.08 P parapet arm stabilizing 45 password 62 , 71 , 74 , 75 pendant connec.
120 en | Index AutoDome 800 Series HD PTZ Camera F .01U.273.797 | 5.0 | 2012.08 Installation Manual Bosch Security Systems, Inc. U UDP 56 , 96 , 106 unicast 109 unit date 75 unit identification 70 uni.
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2012.
An important point after buying a device Bosch Appliances VG5 800 SERIES (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances VG5 800 SERIES yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances VG5 800 SERIES - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances VG5 800 SERIES you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances VG5 800 SERIES will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances VG5 800 SERIES, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances VG5 800 SERIES.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances VG5 800 SERIES. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances VG5 800 SERIES along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
