Instruction/ maintenance manual of the product VEZ-400 Bosch Appliances
Go to page of 68
VEZ-400 Mini PTZ Dome VEZ-400 Series en User Manual.
.
VEZ-400 Mini PTZ Dome Table of Cont ents | en 3 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 T able of Contents 1S a f e t y 5 1.1 Safety precautions 5 1.2 Important safety instructions 6 1.3 Important notices 7 1.4 FCC & ICES compliance 10 1.
4 en | Table of Cont ents VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.3.2 Reboot 34 7.3.3 Initialize 34 7.3.4 Password 35 7.4 Display Setup 36 7.4.1 OSD Setup 36 7.4.2 Privacy Zone 37 7.4.3 Image Setup 39 7.
VEZ-400 Mini PTZ Dome Safety | en 5 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1S a f e t y Before installing and operating the camera, please read this manual carefully.
6 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1.2 Impor tant safety instr uctions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow these instructions.
VEZ-400 Mini PTZ Dome Safety | en 7 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1.3 Impor tant notices All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at le ast 3 mm in each pole, into the electrical installation of the buildi ng.
8 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with NEC800 (CEC Section 60 ) .
VEZ-400 Mini PTZ Dome Safety | en 9 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
10 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. SELV - All the input/output ports ar e Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.
VEZ-400 Mini PTZ Dome Safety | en 11 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 interference when the eq uipment is operated in a commercial environment .
12 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. – cet appareil ne pe ut pas provoquer d'interfé rence nuisible et – cet appar.
VEZ-400 Mini PTZ Dome Safety | en 13 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Au besoin, l’utilisateur cons ultera son revendeur ou un technicien qualifié en radio /télévision, qui procédera à une opération corrective.
14 en | Saf e ty VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Copyright This manual is the intellectual property of Bosch Security Systems and is protected by co pyright.
VEZ-400 Mini PTZ Dome Description | en 15 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2 Description This manual is a reference for programming and operating the VEZ-400 Mini PTZ Dome camera. It contains information about features, commands, an d operation methods.
16 en | Unpackin g VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3 Unpacking This equipment should be unpack ed and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.
VEZ-400 Mini PTZ Dome Unpacking | en 17 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3.2 Additional T ools Required – No. 2 Phillips screwdriver – Drill with approp riate bit for pre-drilling anchor holes – Appropriate tool for cutting a hole in drywall or ceiling tile (if applicable) 3.
18 en | Installation Overview VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 4 Installation Over view The VEZ-400 Mini PTZ Dome camera comes with the hardware and installation instructions ne cessary to mount the camera to a ceiling.
VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 19 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 5 Installing a Sur face Mount Use the following illustration as a guide for installing the camera directly onto the ceiling (surface mount): Figu re 5.
20 en | Installing a Surface Mount VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Determine a secure location that can support the weight of the dome. 2. Use the template (refer to Figu re 6.1 , item 1) to mark the locations of the four screw holes and the cable conduit.
VEZ-400 Mini PTZ Dome Installing a Sur face Mount | en 21 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 screws enough to ensure that the camera base is se cured to the ceiling. 11. Make the necessary Dip Switch settings (described in chapter 4.
22 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6 Connection After the camera is mounted, connect the video, control, and power cables. CAUTION! Do not connect power to the camera until all other connections are made.
VEZ-400 Mini PTZ Dome Connection | en 23 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Use the following illustration as a guide for preparing and connecting the wiring: Figu re 6.
24 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Use a 2-wire (shielded ), half-dup lex, differential, multi-drop with the following attributes: Ta b l e 6 .
VEZ-400 Mini PTZ Dome Connection | en 25 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 6.2 Video Connection Coaxial cable terminated with a male BNC connector is the most common method for transm itting composite video from the camera to a monitor.
26 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Connecting the Alarms Use the following table to conn ect alarm wires to the 8-pin terminal block from the c amera: Ta b l e 6 . 4 8-pin T erminal Block Connections 6.
VEZ-400 Mini PTZ Dome Connection | en 27 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Figu re 6.2 Dome Camera Switc hes Figu re 6.3 Close-up of Ro tar y Switche s and Dip Switche s CAUTION! To prevent humidity problems, the camera’s dome cover must be removed only in dry conditions.
28 en | Connection VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 6.5.1 Setting the address (ID) of the camera To prevent faulty operations an d malfunctions, each camera must have an unique address (ID).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 29 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7 On-Scre en Display (OSD) Menu When the camera is powered-up, the start-up screen appears on the monitor.
30 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Command Action ▲ Move the joystick up to select an item. ▼ Move the joystick down to select an item. ◄ Move the joystick left to select options for an item.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 31 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2 Main Menu The MAIN MENU provides access to all programmable settings for the camera.
32 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.2.1 Editing Titles To edit the title of a function (preset, pattern, tour, scan): 1. Fro m the MAIN MENU , move the joystick to the right (setup menu of preset, pattern , tour, and scan).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 33 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.2.2 Clearing Saved Functions To clear (delete) indi vidual, saved fun ctions: 1. Select a function in any menu (PRESET/TOUR/PATTERN/ SCAN/ALARM).
34 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Note the system information displayed. Note: The camera ID changes depending on settings. 7.3.2 Reboo t Reboot the system if there are an y problems with controlling or operating the camera.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 35 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the function to initialize: – ALL: Clear All items saved in the system. – CAM: Clear camera-related settings.
36 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the numbers th at comprise the password. 4. Press the key {Tele}. 5. Select the option "Enable." 6.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 37 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 2. Select OSD SETUP . The screen OSD SETUP appears. 3. Select the option "Label Position" to set/change the position of labels.
38 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. Wide]. Bosch recommends setting th e size of the mask to be at least twice the size (height and width) of the object being masked.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 39 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.4.3 Image Setup This menu is for changing displayed image settings. To set up image setup: 1. From the MAIN M ENU , select DISPLAY SETUP .
40 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "MD/FD" to program motion detection and/or face detection. 4. Select the appropriate value: –O f f –M D –F D 5.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 41 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the desired language: –E n g l i s h – Chinese –D u t c h –F r e n c h –G e r m a n – Italian – Russian –S p a n i s h 7.
42 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 3. Select the option "Focus." 4. Select the appropriate value: –A u t o –M a n u a l –S e m i - A u t o 5.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 43 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "Mode." 4. Select the appropriate value: – Auto Trace White balance (ATW): Aligns the white balance automatically.
44 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. the Digital Slow Shutter (DSS) function is set higher automatically. To set auto exposure settings: 1. Fro m the MAIN MENU , select CAMERA SETUP .
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 45 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select CAMERA SETUP . The submenu CAM ERA SETUP appears. 2. Select DAY/NIGHT . The screen D/N SETUP appears.
46 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select CAMERA SETUP . The submenu CAMERA SETUP appears. 2. Sel ect ADVA NCED . The screen ADVANCED SETUP appears.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 47 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the option "WDR Setup." 4. Select the value "On." 5. Select the option "WDR Level." 6.
48 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.6.1 Gener al Setup This menu controls general functions of the camera: power-up action, turbo speed, preset speed. To set these fu nctions: 1.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 49 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 1. From the MAIN M ENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Select MOTION SETUP . T he screen MOTION SETUP appears.
50 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 1. Fro m the MAIN MENU , select DOME MOTION . The submenu DOME MOTION appears. 2. Sel ect HOME ACTION . The screen HOME ACTION SETUP appears.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 51 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.6.4 Calibration Calibration is a function for automatically correcting an error on the angle of Pan/Tilt. Calibration can be set at Auto or Manual.
52 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.7 Preset Setup The camera has a maximum of 210 programmable preset positions. Each of the user-defined presets includes Pan/Tilt/ Zoom.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 53 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.8 Pat tern Setup A Pattern is used to display (o r recall) a memorized, repeated and serial trace of pan, tilt, and zoom.
54 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 7.9 T our Se tup The camera has a maximum of 8 Tours in Pelco protocol mode, and 2 Tours in Bosch protocol mode. Each tour can have 28 configurable items.
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 55 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 7.10 Scan Setup An Auto scan is a PTZ function that moves the camera from one position to another position. The camera has a maximum of 8 programmable scans.
56 en | On-Screen Display (OSD) Menu VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security S yst ems, Inc. 13. Select the option "DTime" to set the dwell time for the scan. 14. Set the desired time (fro m 3 minute to 60 seconds).
VEZ-400 Mini PTZ Dome On-Screen Displa y (OSD) Menu | en 57 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 3. Select the approp riate alarm number. 4. Select the option "In" to select the alarm input type. 5. Select the appropriate value: N.
58 en | T roub leshoo ting VEZ-400 Mi ni PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 8 T roubleshoo ting If problems occur, check th e installation of the camera with the instructions in this manual. Re fer to this guide for further information.
VEZ-400 Mini PTZ Dome T roubleshooting | en 59 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Camera is not working properly (including wrong position of camera). - Power-cycle the camera and power supply, or reset the camera using the configuration menu [Main > System > Reboot].
60 en | T echnical Specif ications VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 9 T echnical Specifications Camera Module Imager 1/4" Double Scan,.
VEZ-400 Mini PTZ Dome T echnical Specifications | en 61 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 Power Consumption 24 VAC, 85 0mA / 20W (without heater)24 VAC, 2A / 45W .
62 en | Dimensions VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. 10 Dimensions Figure 10.1 Dimensions - Camera Figure 10.2 Dimensions - Mounting Holes Ø112 (4.41) Ø151.3 (5.96) Ø154 (6.06) 26 (1.02) 79 (3.
VEZ-400 Mini PTZ Dome Bosch Prot ocol | en 63 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 11 Bosch Pro tocol The following table lists camera functions in Bosch protocol.
64 en | Bosch Prot ocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc. * SW Version Number displays 5seconds.
VEZ-400 Mini PTZ Dome Pelco Pr otocol | en 65 Bosch Security Systems, Inc. User Manual F .01U.252.635 | 2.0 | 2011.09 12 Pelco Pro tocol The following table lists camera functions in Pelco protocol. Preset Key Preset Number Operation Example Preset Preset 1-59, 101-250 No.
66 en | Pelco Pro tocol VEZ-400 Mini PTZ Dome F .01U.252.635 | 2.0 | 2011.09 User Manual Bosch Security Systems, Inc..
.
Bosch Security Systems, Inc. 850 Greenfield Road Lancaster, PA 17601 U.S.A. www.boschsecurity.com © Bosch Security Systems, Inc., 2011.
An important point after buying a device Bosch Appliances VEZ-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances VEZ-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances VEZ-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances VEZ-400 you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances VEZ-400 will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances VEZ-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances VEZ-400.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances VEZ-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances VEZ-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center