Instruction/ maintenance manual of the product NDC-265-P Bosch Appliances
Go to page of 108
IP Camera 200 Series NDC-265-P en Installation and Operation Manual.
.
IP Camera 200 Series Table of Cont ents | en 3 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 T able of Contents 1S a f e t y 7 1.1 Safety precautions 7 1.2 Important safety instructions 8 1.3 FCC & ICES compliance 9 1.
4 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 4.4.1 LIVEPAGE 29 4.4.2 RECORDINGS 29 4.4.3 SETTINGS 29 5 Basic Mode 31 5.1 Basic Mode menu tree 31 5.2 Device Access 32 5.
IP Camera 200 Series Table of Cont ents | en 5 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5.2 Recording Profiles 59 6.5.3 Retention Time 61 6.5.4 Recording Scheduler 62 6.5.5 Recording Status 63 6.6 Alarm 64 6.
6 en | Table of Contents IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 8T r o u b l e s h o o t i n g 1 0 1 8.1 LED indicators 101 8.2 Resolving problems 101 8.3 Customer service 101 9 Maintenance 103 9.
IP Camera 200 Se ries Safety | en 7 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1S a f e t y 1.1 Saf ety precautions DANGER! High risk: This symbol indicates an imminently hazardous situation such as "Dangerous Voltage" inside the product.
8 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 1.2 Important safety instr uctions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions be fore operati ng the unit.
IP Camera 200 Se ries Safety | en 9 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1.3 FCC & ICES compliance FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules .
10 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 1.4 UL certification Disclaimer Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the security or signaling aspects of this product.
IP Camera 200 Se ries Safety | en 11 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 1.6 Copyrights The firmware 4.
12 en | Safety IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems.
IP Camera 200 Series Introduction | en 13 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 2 Introduction 2.1 F eature s This HD 720p IP camera is a ready-to-use, complete network video surveillance system inside a compact camera.
14 en | Introduction IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 2.2 Unpacking Unpack carefully and handle the equipment with care.
IP Camera 200 Se ries Installation | en 15 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3 Installation 3.1 Disassembly The camera/housing unit consists of the following parts: To disassemble the unit proceed as follows: 1.
16 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.2 MicroSDH C card Figure 3.1 MicroSDHC card 1. Disassemble the camera. 2. Slide the microSDHC card into the slot. The camera supports most microSD/SDHC cards.
IP Camera 200 Se ries Installation | en 17 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.3 Ne twork (and po wer) connect or Figu re 3.2 Net work connection – Connect the camera to a 10/100 Base-T network. – Use a shielded UTP Category 5e cable with RJ45 connectors.
18 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.4 Po wer connection The camera can accept power from both the DC12V power input and the Ethernet input at the same time.
IP Camera 200 Se ries Installation | en 19 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.5 I/O connector Figu re 3.4 I/O connector pins – Max. wire di ameter AWG 22-28 for both stranded and solid; cut back 5 mm (0.
20 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.6 Audio connectors Figure 3.5 Audio connectors Connect audio devices to the Line In and Line Out connectors. Line - R GND Line - L Line in: 9 kOhm typ.
IP Camera 200 Se ries Installation | en 21 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.7 Mounting Figu re 3.6 Mounting the camera To mount the camera to a wall or ceiling: 1. Stick the supplied installation paper sticker to the surface taking care to orientate it correctly.
22 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.8 Camera se t-up To help set up the camera, conne ct a monitor to the miniature 2.5 mm jack socket using a S1460 monitor cable which can be ordered separately.
IP Camera 200 Se ries Installation | en 23 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Set the camera to the desired position by performing the following steps: 1. For horizontal adjustment (p an) , rotate the camera module in the base.
24 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 3.8.2 Focal length and focus Adjust the focal length and focus as follows: 1.
IP Camera 200 Se ries Installation | en 25 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3.9 Reset ting the camera If the camera cannot be connected be cause .
26 en | Installation IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems.
IP Camera 200 Series Brow ser connection | en 27 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 4 Bro wser connection A computer with Microsoft Internet Ex plorer can be used to receive live images from the camera, control cameras, and replay stored sequences.
28 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Note: If the connection is not estab lished, the maximum number of possible connections may already have been reached.
IP Camera 200 Series Brow ser connection | en 29 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 4.4 Connection establishe d When a connection is established, the LIVEPAGE is initially displayed.
30 en | Brow ser connection IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems the configuration menu is open ed. All settings (except date/ time) are stored in the came ra memory so that they are retained, even if the power is interrupted.
IP Camera 200 Series Basic Mode | en 31 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5 Basic Mode 5.1 Basic Mode menu tree The basic mode configuration menu allows a set of basic camera parameters to be configured.
32 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 5.2 Device Acce ss 5.2.1 Camera name The camera can be assigned a name to assist in identifying it. The name simplifies the manageme nt of multiple devices in more extensive systems.
IP Camera 200 Series Basic Mode | en 33 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Confirm password Re-enter the new password to en sure that there are no ty ping mistakes. The new password is only saved after clicking Se t .
34 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 5.4 Network Use the settings on this page to integrate the device into a network. Some changes only take effect after a reboot.
IP Camera 200 Series Basic Mode | en 35 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5.5 Encoder Select a profile for encoding the video signal. Pre-programmed profiles are available that give pr iority to different parameters.
36 en | Basic Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems.
IP Camera 200 Series Advance d Mode | en 37 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6 Advanced Mode 6.1 Advan ced Mode menu tre e The advanced mode configuration menu contains all camera parameters that can be configured.
38 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.2 G eneral 6.2.1 Identification Camera ID Each camera should be assigned a unique identifier that can be entered here as an addition al means of identification.
IP Camera 200 Series Advance d Mode | en 39 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 – live is the lowest authorization le vel. It can only be used to view the live video image and switch between the different live image displays.
40 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.2.3 Date/Tim e Date format Select the required date format. Device date / Device time If there are multiple devices operating in your system or network, it is important to sync hronize their inter nal clocks.
IP Camera 200 Series Advance d Mode | en 41 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 5. Click one of the entries in th e table to make changes. The entry is highlighted. 6. Click Delete to remove the entry from the table.
42 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems If the Custom option is selected, enter values in the X and Y position fields. Time stamping This field sets the position of th e time and date overlay.
IP Camera 200 Series Advance d Mode | en 43 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.3 W eb Interface 6.3.1 Appearance Adapt the appearance of the web interface and change the website language to meet your requirements.
44 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.3.2 LIVEPAGE Functions In this window, adapt the Livepage f unctions to meet your requirements. Choose from a vari ety of different options for displaying information and controls.
IP Camera 200 Series Advance d Mode | en 45 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Allow snapshots Specify whether the icon for saving i ndividual images should be displayed below the live image. Individual images can only be saved if this icon is visible.
46 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4 Camera 6.4.1 Picture Settings Contrast (0...255) Adjusts the contrast of the image. Saturation (0...255) Adjusts the color saturation; 0 gives a monochrome image.
IP Camera 200 Series Advance d Mode | en 47 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 B-gain The blue gain adjustment offsets th e factory white point alignment (reducing blue introduces more yellow). It is only necessary to change the wh ite point offset for special scene conditions.
48 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.2 Encoder Profile The camera generates up to four video streams simultaneously (quad streaming).
IP Camera 200 Series Advance d Mode | en 49 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Profile Configuration Profiles can be configured for use with the H.264 settings of encoder streams. Select a profile by clicking the appropriate tab.
50 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems advantageous with low bandwidths. The image rate in ips (images per second) is displayed next to the slider. Video r esolut ion Select the desired resolution for the video image.
IP Camera 200 Series Advance d Mode | en 51 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 P-frame quality This setting adjusts the maximum image quality of the P-frames. Auto automatically adjusts to the optimum combination of movement and image defini tion (focus).
52 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.3 Encoder Str eams Select H.264 Settings 1. The codec algorithm for stream 1 is always: – H.264 MP 720p25/30 fixed 2.
IP Camera 200 Series Advance d Mode | en 53 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.4.4 Audio Select the microphone or line-in connector as the Audio input or switch it off. Adjust the Input volume with the slider.
54 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.4.5 Installer Menu Camera LED Disable the Camera LED on the camera to switch it off. Mirror image Enable Mirror image to obtain a vertically flipped image (around the horizontal axis) of the camera picture.
IP Camera 200 Series Advance d Mode | en 55 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5 Recording Record the images from the camera to local storage media or to an appropriately conf igured iSCSI system.
56 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems further information, contact your local customer service at Bosch Security Systems.
IP Camera 200 Series Advance d Mode | en 57 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Note: If a device had primary and seco ndary recording running on th.
58 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 4. Check the box in the Rec. 1 or Rec. 2 column to specify which data stream should be recorded on the storage media selected.
IP Camera 200 Series Advance d Mode | en 59 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5.2 R ecording Profiles Define up to ten different record ing profiles here, then assign these to individual days or times of day on the Recording Scheduler page.
60 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Alarm recording Select the Pre-alarm t ime from the list box. Select the Post-alarm time from the list box. Select the Alarm stream to use for alarm recording.
IP Camera 200 Series Advance d Mode | en 61 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.5.3 R etention Time Specify the retention times for recordings. If the available memory capacity of a medium ha s been used, older recordings are only overwritten if the retention time entered here has expired.
62 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.5.4 Recording Scheduler The recording scheduler allows you to link the created recording profiles to the days and times at which the camera's images are to be recorded in th e event of an alarm.
IP Camera 200 Series Advance d Mode | en 63 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Profile names To change the names of the reco rding profiles listed in the Time periods box: 1. Click a profile. 2. Click Rename .
64 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6 Alarm 6.6.1 Alarm Connections Select the respon se of the camera when an alarm occurs. In the event of an alarm, the device can automatically connect to a pre-defined IP address.
IP Camera 200 Series Advance d Mode | en 65 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 The camera connects to all remote stations protected by the same general password. To define a general password: 1. Select 10 in the Number of destination IP address list box.
66 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems display the alarm image. Refer to the destination device documentation concerning image display options and available video outputs.
IP Camera 200 Series Advance d Mode | en 67 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.6.2 Vi deo Content Analyses (VCA) The camera has integrated VCA which can detect and analyze changes in the signal using image processing algorithms.
68 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.3 V CA configuration- Profiles Configure two profiles with diff erent VCA configurations. Save profiles on your computer's ha rd drive and load saved profiles from there.
IP Camera 200 Series Advance d Mode | en 69 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Analysis type Select the required analysis algorithm. By default, only Motion+ is available — this offers a motion detector and essential recognition of tampering.
70 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Minimum object size Specify the number of sensor fiel ds that a moving object must cover to generate an alarm. Th is setting prevents objects that are too small from triggering an alarm.
IP Camera 200 Series Advance d Mode | en 71 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Sensitivity and Trigger delay [s] can only be changed if Reference check is selected.
72 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Scene too dark Activate this function if tamperi ng associa ted with covering the objective (for instance, by sprayi ng paint on it) should trigger an alarm.
IP Camera 200 Series Advance d Mode | en 73 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Appearing edges Select this option if the selected area of the reference image includes a largely homogenous surf ace. If structures appear in this area, then an alarm is triggered.
74 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.4 V CA configuration - Scheduled A scheduled configuration allows you to link a VCA profile with the days and times at which the vi deo content analysis is to be active.
IP Camera 200 Series Advance d Mode | en 75 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 3. Click OK . The item is deleted from the table and the window closes. 4. The process must be repeated for deleting additional days.
76 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.5 V CA configuration - Event triggered This configuration allo ws you to stipulate that the video content analysis is only to be activate d when triggered by an event.
IP Camera 200 Series Advance d Mode | en 77 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.6.6 A udio Alarm Create alarms based on audi o signals. Configure signal strengths and frequency ranges so that false alarms, for example, machine noise or ba ckground noise, are avoided.
78 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.6.7 Alarm E-Mail As an alternative to automatic connecting, alarm states can also be documented by e-mail. This makes it possible to notify a recipient who does not have a vide o receiver.
IP Camera 200 Series Advance d Mode | en 79 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Destination address Enter the e-mail address for al arm e-mails here. The maximum address length is 49 characters. Sender name Enter a unique name for the e-mail sender, for example, the location of the device.
80 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.7 Interfaces 6.7.1 Alarm i nput Configure the alarm trigger for the camera. Select N.C. (Normally Closed) if the al arm is to be triggered by opening the contact.
IP Camera 200 Series Advance d Mode | en 81 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Relay follows If required, select a specific event that will trigger the relay.
82 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.8 Network 6.8.1 N etwork Access The settings on this page are used to integrate the device into a network. Some changes only take effect after a reboot.
IP Camera 200 Series Advance d Mode | en 83 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Gateway address For the device to estab lish a connection to a remote location in a different subnet, enter the IP address of th e gateway here.
84 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems RCP+ port 1756 Activating RCP+ port 1756 allo ws unencrypted connections on this port. To allow only encrypted connections, se t the Off option to deactivate the port.
IP Camera 200 Series Advance d Mode | en 85 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 Host name Enter the host name registered on DynDNS.org for the device here. User name Enter the user name registered at DynDNS.
86 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.8.2 Advanc ed The settings on this page are used to set advanced settings the network. Some changes only take effect after a reboot.
IP Camera 200 Series Advance d Mode | en 87 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 RTSP port If necessary, select a different port for the exchange of the RTSP data from the list. The standard RTSP port is 554.
88 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems A special IP address (class D addr ess) must be configured f or multicast operation in a mult icast-enabled network. The network must support group IP addresses and the Internet Group Management Protocol (IGMP V2).
IP Camera 200 Series Advance d Mode | en 89 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 6.8.4 FTP Posting Save individual JPEG images on an FTP server at specific intervals. If required, retrieve these images at a later date to reconstruct alarm events.
90 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 6.9 Ser vice 6.9.1 Maintenance Firmware The camera functions and parameters can be updated by uploading new firmware. To do this, the latest firmware package is transferred to the device via the network.
IP Camera 200 Series Advance d Mode | en 91 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 If the operating status LED lights up red, the upload has failed and must be repeated. To perf orm the upload, switch to a special page: 1.
92 en | Advanced Mode IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems Maintenance log Download an internal maintenanc e log from the device to send it to Customer Service for support purposes.
IP Camera 200 Series Operation via the browse r | en 93 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 7 Operation via the brow ser 7.1 Liv epage After the connection is established, the Livepage is initially displayed.
94 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.1.2 I mage selection View the image on a full screen. – Click the Stream 1 , Stream 2 or M-JPEG tab below the video image to switch between the differe nt displays for the camera image.
IP Camera 200 Series Operation via the browse r | en 95 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 7.1.3 Digital I/O Depending on the configuration of the unit, the alarm input and the relay output are displayed next to the camera image.
96 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.1.5 Saving snapshots Individual images from the video sequence that is currently being shown on the Livepage can be saved in JPEG format on the computer's hard drive.
IP Camera 200 Series Operation via the browse r | en 97 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 All connected users receive audi o signals sent from the camera but only the user who first pressed the F12 key can send audio signals; others must wait for th e first user to release the key.
98 en | Operation via the bro wser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 7.2 Recordings page Click Recordings to access the Recordings page from the Livepage or Setti ngs page (the Recordings link is only visible if a storage medium ha s been selected ).
IP Camera 200 Series Operation via the browse r | en 99 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 The time bar offers var ious options for navigation in and between sequences. – Change the time interval display ed by clicking the plus or minus icons.
100 en | Operation via the brow ser IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems.
IP Camera 200 Series T r oubleshooting | en 101 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 8 T r oubleshooting 8.1 LED indicators The camera has LEDs on the front and the rear panel that show the operating status and can indi cate possible malfunctions.
102 en | T r oubleshooting IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems version numbers of the firmware and other status information can be seen when the unit starts or by opening the Service menu.
IP Camera 200 Series Maintenance | en 103 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 9 Maintenance 9.1 Repairs 9.1.1 Transfer and disposal The camera should only be passed-on togeth er with this installation guide.
104 en | Maintenance IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems.
IP Camera 200 Se ries T echnical Data | en 105 Bosch Security Systems Installation and Operation Ma nual AR18-10-B012 | v1.5 | 2011.01 10 T echnical Data 10.1 Specifications Input voltage +12 VDC or Power-over-Ethernet Power consumption 4.2 W (max) Sensor type ¼-inch CMOS Sensor pixels 1280 x 800 Sensitivity 1.
106 en | T echnical Data IP Camera 200 Series AR18-10-B012 | v1.5 | 2011.01 In stallation and Operation Manual Bosch Security Systems 10.1.1 Accessories Contact a Bosch representative in your area for the latest available accessories or visit our we bsite at www.
.
Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 201 2.
An important point after buying a device Bosch Appliances NDC-265-P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bosch Appliances NDC-265-P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bosch Appliances NDC-265-P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bosch Appliances NDC-265-P you will learn all the available features of the product, as well as information on its operation. The information that you get Bosch Appliances NDC-265-P will certainly help you make a decision on the purchase.
If you already are a holder of Bosch Appliances NDC-265-P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bosch Appliances NDC-265-P.
However, one of the most important roles played by the user manual is to help in solving problems with Bosch Appliances NDC-265-P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bosch Appliances NDC-265-P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center