

Please read this manual carefully before operating your set and retain it for future reference.

CAUTION
DO NOT OPEN
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built- in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
Getting Started 2 · Getting Started

This device is equipped with a portable battery or accumulator.
Disposal of waste batteries/accumulators
Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Disposal of your old appliance
Getting Started 3 · Getting Started

LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.
yy Because AACS (Advanced Access Content
System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
yy Please note that this is NOT a
Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD- ROM Mark, BD+, or this product, please contact an authorized Customer Service Centre.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.
Getting Started 4 · Getting Started

The colour system of this player differs according to currently playing discs.
For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.
Only the multi system colour TV can receive all signals output from the player.
yy If you have a PAL colour system TV, you will see
just distorted images when using discs or video contents recorded in NTSC.
yy The multi system colour TV changes the colour
system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen.
yy Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be recorded correctly on your recorder.
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.
Getting Started 5 · Getting Started

Table of Contents 6
2 Safety Information 8 Introduction 8 – Playable Discs and symbols used in this manual 9 – About the “7” Symbol Display 9 – Compatibility Notes 10 – File compatibility 11 – AVCHD (Advanced Video Codec High Definition) 12 – About DLNA 12 – Certain System Requirements 12 – Regional Code 12 – System Select 13 Remote control 14 Front panel 15 Rear panel
38 General Playback 38 – Using [HOME] menu 38 – Playing a Disc 38 – Playing a file on a disc/USB device 39 – Playing Blu-ray 3D disc 39 – Enjoying BD-Live™ 40 – Playing a file on a network server 40 – Basic operations for video and audio content 41 – Basic operations for photo content 41 – Using the disc menu 41 – Resume playback 41 – Last Scene Memory 42 Advanced Playback 42 – Repeat Playback 42 – Repeating a specific portion 42 – Viewing content information 43 – Changing content list view 43 – Selecting a subtitle file 44 – Options while viewing a photo 44 – Listening to music while slide show 45 On-Screen display 45 – Displaying content information on- screen 46 – Playing from selected time 46 – Selecting a subtitle language 46 – Hearing a different audio 46 – Watching from a different angle 47 – Changing the TV Aspect Ratio 47 – Changing subtitle code page 47 – Changing the Picture Mode 48 Radio Operations 48 – Listening to the radio 48 – Presetting the Radio Stations 48 – Deleting a saved station
16 Positioning the system 17 Speaker Connection 17 – Attaching the speakers to the player 18 Connecting to Your TV 18 – HDMI Connection 19 – What is SIMPLINK? 20 – Video Connection 20 – Resolution Setting 21 Antenna connection 22 Connections with external device 22 – AUX Connection 22 – PORT. IN connection 23 – OPTICAL IN connection 24 Connecting to your Home Network 24 – Wired network connection 25 – Wired Network Setup 27 USB device connection 27 – Playback content in the USB device
28 Settings

Table of Contents 7
51 Troubleshooting 51 – General 52 – Network 53 – Picture 53 – Sound 53 – Customer Support 53 – Open source software notice
54 Controlling a TV with the Supplied Remote Control 54 – Setting up the remote to control your TV 55 Network Software Update 55 – Network update notification 55 – Software Update 57 About Nero MediaHome 4 Essentials 57 – System Requirements 58 – Installing Nero MediaHome 4 Essentials 58 – Sharing files and folders 59 Area Code List 60 Language code List 61 Trademarks and Licenses 63 Audio Output Specifications 64 Specifications 66 Maintenance 66 – Handling the Unit 66 – Notes on Discs 67 Important Information Relating to Network Services


Getting Started 8 · Getting Started

yy Depending on the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific media.
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.
yy Because BD-ROM is a new format, certain disc,
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.
recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
yy This unit allows you to enjoy functions such
yy If you record a disc using a personal
as picture-in-picture, secondary audio and Virtual packages, etc., with BD-ROM supporting BONUSVIEW (BD-ROM version 2 Profile 1 version 1.1). Secondary video and audio can be played from a disc compatible with the picture-in- picture function. For the playback method, refer to the instructions in the disc.
computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)
yy This player requires discs and recordings to
yy Viewing high-definition content and up-
meet certain technical standards in order to achieve optimal playback quality.
converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 5.1 channels if you use HDMI connection for the audio output of the unit.
yy Customers should note that permission
is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
yy You can use a USB device to store some disc
related information, including downloaded on- line content. The disc you are using will control how long this information is retained.
yy You have to set the disc format option
to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)
Getting Started 9 · Getting Started

Supplied bundle DLNA server for Macintosh edition has limitations in file compatibility, such as ASF, WMA and WMV.
Getting Started 10 · Getting Started

yy The file name is limited to 180 characters.
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
(total number of files and folders)
yy This player supports UTF-8 files even it
contains Unicode subtitle contents. This player can not support the pure Unicode subtitle files.
yy Depending on the size and number of the
files, it may take several minutes to read the contents on the media.
yy Depending on the types of file or ways of
yy File compatibility may differ depending on
recording, it may not play back.
the server.
yy A disc which was recorded by multi-session
yy Because the compatibility on DLNA server
are tested on the bundle DLNA server (Nero MediaHome 4 Essentials Windows edition) environment, file requirements and playback functions may differ depending on media servers.
on normal PC is not supported on this player.
yy To be playback a movie file, movie file name
and Subtitle file name must be the same.
yy If video codec is MPEG2 TS or MPEG2 PS,
yy Supplied bundle DLNA server for Macintosh
subtitle does not play back.
edition has limitations in file compatibility, such as ASF, WMA and WMV.
yy The total playback time of music file
indicated on the screen may not correct for VBR files.
yy The file requirements on page 10 are
not always compatible. There may have some restrictions by file features and media server’s ability.
yy Playing a movie subtitle files are only
available on share folder of a PC or DLNA media server created by supplied Nero MediaHome 4 Essentials software on this player package.
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in camcorders.
yy The files from removable media such as USB
yy The AVCHD format is a high definition digital
drive, DVD-drive etc. on your media server may not be shared properly.
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than that of the conventional image compressing format.
yy This unit cannot support the ID3 Tag
embedded MP3 file.
yy The total playback time of audio file
indicated on the screen may not correct for VBR files.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
yy HD movie files contained on the CD/DVD or
USB 1.0/1.1 may not played properly. Blu-ray Disc or USB 2.0 are recommended to play back HD movie files.
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
yy This player supports H.264/MPEG-4 AVC
DVD camcorder discs.
profile Main, High at Level 4.1. For a file with higher level, the warning message will appear on the screen.
yy This player does not support files that are
recorded with GMC*
1 or Qpel* 2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Getting Started 11 · Getting Started

Regional Code
This Player is a DLNA Certified digital media player that can display and play movie, photo and music content from your DLNA-compatible digital media server (PC and Consumer Electronics).
This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
The Digital Living Network Alliance (DLNA) is a cross-industry organization of consumer electronics, computing industry and mobile device companies. Digital Living provides consumers with easy sharing of digital media through your home network.
You must select the appropriate system mode for your TV system. Open the disc tray using the B (OPEN/CLOSE) button and then, press and hold M (PAUSE) for more than five seconds to be able to select a system (PAL, NTSC, AUTO)
The DLNA certification logo makes it easy to find products that comply with the DLNA Interoperability Guidelines. This unit complies with DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or other DLNA compatible device is connected to this player, some setting changes of software or other devices may be required. Please refer to the operating instructions for the software or device for more information.
For high definition video playback:
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified by disc authors).
Getting Started 12 · Getting Started

a
c
FUNCTION: Changes input mode.
SPEAKER LEVEL: Sets the sound level of desired speaker.
SUBTITLE: Selects a subtitle language.


SOUND EFFECT: Selects a sound effect mode.

VOL +/-: Adjusts speaker volume.
OPTICAL: Changes input mode to optical directly.
SLEEP: Sets a certain period of time after which the unit will switch to off.
MUTE: Mute the unit.
Colored (R, G, Y, B) buttons: - Use to navigate BD-ROM menus.
INFO/MENU (m): Displays or exits On-Screen Display.
They are also used for [MOVIE], [PHOTO], [MUSIC], [Premium] and [LG Apps] menu. - B button: Selects mono/ stereo
HOME ( ): Displays or exits the [Home Menu].
in FM mode.
RDS: Radio Data System.
b
PTY: Views the programme type of the RDS.
PTY SEARCH: Searches programme type.
0-9 numerical buttons: Selects numbered options in a menu.
CLEAR: Removes a mark on the search menu or a number when setting the password.
BACK ( ): Exits the menu or returns to the previous screen.
REPEAT (h): Repeats a desired section or sequence.
TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.
AUDIO: Selects an audio language or audio channel.
? : Marked button is not available.
Z (STOP): Stops playback.
d
z (PLAY): Starts playback.
TV Control Buttons: See page 54.
M (PAUSE/STEP): Pauses playback.
C/V (SKIP): Goes to the next or previous chapter / track / file.
c/v (SCAN): Searches backward or forward.
Remove the battery cover on the rear of the Remote Control, and insert R03 (size AAA) battery with 4 and 5 matched correctly.
Getting Started 13

R (Open / Close) T (Play / Pause) I (Stop) F (Function) Changes the input source or function. VOL -/+ 1 (Power)
c PORT. IN


a AC power cord
h HDMI OUT TO TV
f AUX (L/R) INPUT

Positioning the system
yy Be careful to make sure children not to put
their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes. For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).
yy Place the center speaker at a safe distance
from the child’s reach. Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.
yy The speakers contain magnetic parts, so
colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.
A
yy Before using the subwoofer, remove the
F
protective vinyl.
A
A
E
A
D
A Front left speaker (L)/ B Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible.
C Center speaker: Place the center speaker above or below the monitor or screen.
D Surround left speaker (L)/ E Surround right speaker (R): Place these speakers behind your listening position, facing slightly inwards.
F Subwoofer: The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the center of the room to reduce the wall reflections.
Connecting 16 · Connecting · G Unit

Grey Rear Rear right
Blue Rear Rear left
Orange Sub woofer Any front position
Red Front Front right
White Front Front left
Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus).

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High speed HDMI™ cable with Ethernet). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor.
Make one of the following connections, depending on the capabilities of your existing equipment.
yy HDMI connection (page 18)
yy Video connection (page 20)


equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.
yy Please refer to the manuals of your TV,
stereo system or other devices as necessary to make the best connections.
yy Make sure the player is connected directly
to the TV. Tune the TV to the correct video input channel.
yy Do not connect your player via your VCR.
The image could be distorted by the copy protection system.
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
Connecting 18 · Connecting

yy If a connected HDMI device does not accept
the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
yy When you use HDMI connection, you can
change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 20.)
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 31).
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
yy Changing the resolution when the
connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).
Connecting 19 · Connecting

Resolution Setting
Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers.
The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu.



Connecting 20 · Connecting

yy If your TV does not accept the resolution
you have set on the player, you can set resolution to 576p as follows:
Connect the supplied antenna for listening to the radio.

2 Press Z (STOP) for more than 5 seconds.
yy When you set the resolution to 576i with
HDMI connection, actual resolution is outputted to 576p.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
yy If you select a resolution that your TV
does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or 50 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc.
After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.
yy The resolution of the VIDEO OUT jack is
always outputted at 576i resolution.
Connecting 21 · Connecting

You can enjoy the sound from your portable audio player through the speakers of this system.
Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN socket of this unit. And then select the [PORTABLE] option by pressing FUNCTION and ENTER (b).
You can enjoy the sound from an external component through the speakers of this system.
You can also use the F (Function) button on the front panel to select the input mode.
Connect the analog audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing FUNCTION and ENTER (b).

You can also use the F (Function) button on the front panel to select the input mode.

Connecting · Connecting

You can enjoy the sound from your component with a digital optical connection through the speakers of this system.
Connect the optical output jack of your component into the OPTICAL IN jack on the unit. And then select the [OPTICAL] option by pressing FUNCTION and ENTER (b). Or press OPTICAL to select directly.
You can also use the F (Function) button on the front panel to select the input mode.

To the digital optical output jack of your component
Connecting 23 · Connecting


This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-LIVE interactivity and on-line content services.
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.
Please refer to the documentation for your network device for further instructions.
Connect the player’s LAN port to the corresponding port on your Modem or Router using a commercially available LAN or Ethernet cable.

cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
yy Do not connect a modular phone cable to
configurations, please follow the specifications of your telecommunication carrier or internet service provider.
yy If you want to access content from DLNA
servers, this player must be connected to the same local area network with them via a router.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC. (see page 57)
Connecting 24 · Connecting

If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
If you want to set the network settings manually, use W/S to select [Advanced Setting] on the [Network Setting] menu and press ENTER (b).
Normally, select [Dynamic] to allocate an IP address automatically.

Before setting the wired network, you need to connect the broadband internet to your home network.

If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/A/D and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.


Network will automatically be connected to the unit.
Network connection status is displayed on the screen.

Connecting 25 · Preparation · Connecting

yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits subscription to one device, this player may not be allowed to connect when a PC is already connected.)
yy Many network connection problems during
set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP.
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly.
yy Our company is not responsible for any
malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not created or provided by our company, and our company is not responsible for their functionality or continued availability. Some disc related material available by the Internet Connection may not be compatible with this player. If you have questions about such content, please contact the producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not operate properly because of internet congestion, the quality or bandwidth of your internet service, or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your internet service does not allow for such a connection, you will not be able to connect the player.
yy You must use a Router to use xDSL service.
Connecting 26 · Connecting

yy This player supports USB flash drive/
external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB flash drive/external HDD formatted in either FAT16 or FAT32 when using BD-Live.
This player can play movie, music and photo files contained in the USB device.
yy The USB device can be used for the local
storage for enjoying BD-LIVE discs with Internet.
yy This unit can support up to 4 partitions of
the USB device.
yy Do not extract the USB device during
operation (play, etc.).
yy A USB device which requires additional
program installation when you have connected it to a computer, is not supported.
When you connect the USB device on the HOME menu, the player plays only music file contained in the USB storage device automatically. If the USB storage device is containing various types of files, a menu for the file type selection will appear.
USB1.1 and USB2.0.
yy Movie, music and photo files can be played.
For details of operations on each file, refer to relevant pages.
File loading may takes few minutes depending on the number of content stored in the USB storage device. Press ENTER (b) while [Cancel] is selected to stop loading.
yy Regular back up is recommended to
prevent data loss.
yy If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not be recognized.
yy Some USB device may not work with this
unit.
yy Digital camera and mobile phone are not
supported.

yy USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage device.
Connecting 27 · Connecting


When you turn on the unit for the first time, the initial setup wizard appears on the screen. Set the display language, network settings and speaker setup on the initial setup wizard.
The initial setup wizard appears on the screen.
After verifying the test tone signals, press ENTER (b) while [Stop] is highlighted. Select [Next] and press ENTER (b).


Press ENTER (b) while [Finish] is highlighted to finish the initial setup settings. If there is any settings to be changed, use A/D to select [Previous] and press ENTER (b).

If wired network is connected , the network connection setting will automatically be finished.
System Setting 28 · System Setting

You can change the settings of the player in the [Setup] menu.




System Setting 29 · System Setting

Sets the output resolution of the HDMI video signal. Refer to page 20 for details about the resolution setting.
Select a TV aspect ratio option according to your TV type.
[4:3 Letter Box]
If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV.
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
[4:3 Pan Scan]
Outputs 1080 lines of progressive video.
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.
Outputs 1080 lines of interlaced video.
[16:9 Original]
Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides.
Outputs 720 lines of progressive video.
Outputs 576 lines of progressive video.
[16:9 Full]
Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen.
Outputs 576 lines of interlaced video.
When the resolution is set to 1080p, select [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input.
You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p.
yy When you select [24 Hz], you may
experience some picture disturbance when the video switches video and film material. In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with 1080p/24 Hz, the actual frame frequency of the video output will be 50 Hz to match the video source format.

[LANGUAGE] Menu
Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device.
Select a language for the [Setup] menu and on- screen display.
Select when connecting to a HDMI display device.
[RGB]
Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu.
Select when connecting to a DVI display device.
Refers to the original language in which the disc was recorded.
Select the type of output mode for Blu-ray 3D disc playback.
Press ENTER (b) to select another language. Use number buttons then press ENTER (b) to enter the corresponding 4-digit number according to the language code list on page 60.
Blu-ray 3D disc playback will output as 2D mode like a normal BD-ROM disc playback.
Blu-ray 3D disc playback will output as 3D mode.
[Off] (Disc Subtitle only)
Turn off Subtitle.
Depending on the disc, your language setting may not work.
Changes the background of the initial screen.
This function allows you to display or delete the guide bubble on the Home Menu. Set this option to [On] for displaying guide.
![Page 32 of the LG HX 352 user manual — [OK]](/cdn/reader/78/78a988c7e7f4b5986af056dcbdca357573d4682437476c2547e12fafd99b8967/images/page-32.webp?w=400)
Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use.
To obtain the best possible sound, use the speaker setup display to specify the volume of the speakers you have connected and their distance from your listening position. Use the test to adjust the volume of the speakers to the same level.
Since many factors affect the type of audio output, see “Audio Output Specifications” on page 63 for details.

[PCM Stereo] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select a speaker that you want to adjust.
Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder.
Adjust the output level of each speaker.
[DTS Re-Encode] (HDMI only)
Select if you connect this unit’s HDMI OUT jack to a device with DTS decoder.
Adjust the distance between each speaker and the listening position.
[Test/ Stop test tone]
Select if you connect this unit’s HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD decoder.
The speakers will emit a test tone.
Confirms the setting.
yy When [Digital Output] option is set to [PCM
Cancels the setting.
Multi-Ch], the audio may output as PCM Stereo if the PCM Multi-Ch information is not detected from HDMI device with EDID.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is outputted for BD-ROM discs with secondary audio and the original audio is outputted for the other discs (like [BitStream]).
yy This setting is not available on the input
signal from an external device.

Sometimes Digital TV encounters a delay between picture and sound. If this happens you can compensate by setting a delay on the sound so that it effectively ‘waits’ for the picture to arrive: this is called HD AV Sync. Use W S to scroll up and down through the delay amount, which you can set at anything between 0 and 300 ms.
This function allows you to listen to a movie at a lower volume without losing clarity of sound.
Turns off this function.
Compress the dynamic range of the Dolby Digital, Dolby Digital Plus or Dolby TrueHD audio output.
The dynamic range of the Dolby TrueHD audio output is specified by itself. And the dynamic range of the Dolby Digital and Dolby Digital Plus are operated as same as the [On] mode.
The DRC setting can be changed only when a disc is not inserted or the unit is in complete stop mode.

The [LOCK] settings affect only BD-ROM and DVD playback.
Blocks playback of rated DVD based on their content. (Not all discs are rated.)
To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password.
Rating one (1) has the most restrictions and rating eight (8) is the least restrictive.
If you select [Unlock], parental control is not active and the disc plays in full.
You can create or change the password.
Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing.
Enter a 4-digit password twice, and press ENTER (b) to create a new password.
All BD-ROM can be played.
Enter the current password and press ENTER (b). Enter a 4-digit password twice, and press ENTER (b) to create a new password.
Prohibits play of BD-ROM with corresponding ratings recorded on them.
If you forget your password
If you forget your password, you can clear it using the following steps:
Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 59.
If you make a mistake before pressing ENTER (b), press CLEAR. Then input the correct password.

The [NETWORK] settings are needed to use the software update, BD Live and on-line content services.
Select your area for displaying proper services and contents on the [Premium] and [LG Apps] feature.
If your home network environment is ready to connect the player, the player needs to be set the wired for network communication. (See “Connecting to your Home Network” on page 24.)
You can make a network name using virtual keyboard. This player will be recognised by the name you are entering on your home network.
[OTHERS] Menu
If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection to the network and the internet have been established.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.
You can restrict Internet access when BD-LIVE functions are used.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod. divx.com for more information on how to complete your registration.
Internet access is permitted for all BD-LIVE contents.
Internet access is permitted only for BD- LIVE contents which have content owner certificates. Internet access and AACS Online functions are prohibited for all BD-LIVE contents without a certificate.
Displays the registration code of your player.
Deactivate your player and display the deactivation code.
Internet access is prohibited for all BD-LIVE contents.
All the downloaded videos from DivX(R) VOD with this player’s registration code can only be played on this unit.

Auto Power Off
This function allows you to control the playback of media streamed from DLNA media server by a DLNA certified smartphone. Most DLNA certified smartphone has a function to control the playback media on your home network. Set this option to [On] for allowing your smartphone to control this unit. Refer to instructions of your DLNA certified smartphone or the application for more detailed information.
The screen saver appears when you leave the player in Stop mode for about five minutes. If you set this option to [On], the unit automatically turns off within 20 minutes since the Screen Saver is displayed. Set this option to [Off] to leave the screen saver until the unit is operated by the user.
Depending on the function, this function may not be available.
yy This unit and the DLNA Certified Smartphone
must be connected to the same network. yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME ( ) to display the home menu before connecting to this unit.
You can reset the player to its original factory settings.
yy While controlling the unit using the [Network
Play] function, the remote control may not work. yy Available file formats described on page
Initializes the BD-Live contents from the connected USB storage.
10 are not always supported on [Network Play] function.
If you reset the player to its original factory settings using [Factory Set] option, you have to set all the activation for the on-line services and network settings again.
Displays the current software version.
You can update the software by connecting the unit directly to the software update server (see page 55).
Press ENTER (b) to view the notice of Network Service Disclaimer.
![Page 37 of the LG HX 352 user manual — Setting the [User EQ]](/cdn/reader/78/78a988c7e7f4b5986af056dcbdca357573d4682437476c2547e12fafd99b8967/images/page-37.webp?w=400)
![LG HX 352 — Setting the [User EQ] diagram (page 37)](/cdn/reader/78/78a988c7e7f4b5986af056dcbdca357573d4682437476c2547e12fafd99b8967/images/rimg-17.webp)
You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe different depending on sound sources and effects.
[Natural Plus]: You can enjoy the natural sound effect same as 5.1 channel.
[Natural]: You can enjoy comfortable and natural sound.
[Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded.
Select [Cancel] option then press ENTER (b) to cancel the setting. Select [Reset] option then press ENTER (b) to reset the all adjustments.
[Bass Blast]: Reinforce the bass sound effect from front left and right speaker and subwoofer.
[Loudness]: Improves bass and treble sound.
[User EQ]: You can adjust the sound by raising or lowering the level of specific frequency.
System Setting 37 · System Setting

Using [HOME] menu
The home menu appears when you press HOME ( ). Use W/S/A/D to select a category and press ENTER (b).
For the most Audio CD, BD-ROM and DVD-ROM discs, playback starts automatically.

yy Playback functions described in this manual
are not always available in every files and media. Some functions can be restricted depending on many factors.
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the proper playback.
Depending on the region, [LG Apps] service and [Search] function may not be available at the moment. The service may become available in these regions through at software update later.
yy Unfinalized DVD VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot support these kinds of discs.
a [Music] - Plays audio contents.
b [Movie] - Plays video contents.
c [Photo] - Plays photo contents.
d [Premium] - Displays the Premium Home screen.
e [LG Apps] - Displays the [LG Apps] screen.
f [Input] - Changes input mode.
This player can play movie, music and photo files contained in the disc or USB device.
g [Setup] - Adjusts the system settings.
h [Search] - Searching an on-line content by inputting a keyword on the search menu.
i [LG Apps] - Displays the [LG Apps] screen.
The unit plays only music file contained in the USB storage device or disc automatically.
j [Favorite Apps] - Shortcut for user’s favorite Apps.
k [My Apps] - Displays the My Apps screen.
Operating 38 · k · Operating

Enjoying BD-Live™ e
This player can play the Blu-ray 3D discs which contains separate views for the left and right eyes.
BD-ROM supporting BD-Live that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet.
In order to playback Blu-ray 3D title in stereoscopic 3D mode, you need to:
y y Check your TV is 3D capable and has HDMI
input(s).
A USB storage device is needed to download bonus content.
yy Wear 3D glasses to enjoy the 3D experience
if it is necessary.
y y Check whether the BD-ROM title is the Blu-
ray 3D disc or not.
y y Connect an HDMI cable (High Speed HDMI™
Depending on a disc, the BD-Live function may not be operated if [BD-LIVE connection] option is set to [Partially Permitted].
Cable with Ethernet) between the player’s HDMI output and TV’s HDMI input.
The operations are differ depending on the disc. Refer to the manual supplied with the disc.
Do not extract the connected USB device while content is being downloaded or a Blu- ray disc is still in the disc tray. Doing so may damage the connected USB device and BD- Live features may not operate properly with the damaged USB device anymore. If the connected USB device seems damaged from such an action, you can format the connected USB device from the PC and reuse it with this player.
You may need to adjust the display settings and focus on your TV’s setting for the improved 3D effect.
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant woman.
yy Some BD-Live contents may be restrictively
accessed in some territories by contents provider’s own decision.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is strongly recommended to stop the playback and rest until you feel normal.
yy It may take up to several minutes to load
and start enjoying BD-Live contents.
Operating 39 · Preparation · Operating

Basic operations for video and audio content
This player can play video, audio and photo files located in a DLNA server through your home network.
Press Z (STOP) while playback.
Press M (PAUSE) while playback. Press d (PLAY) to resume playback.
Press M (PAUSE) while movie playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback.

Press c or v to play fast forward or fast reverse during playback.
You can change the various playback speeds by pressing c or v repeatedly.
If you want to rescan available media server, press the green (G) colored button.
While the playback is paused, press v repeatedly to play various speeds of slow motion.
During playback, press C or V to go to the next chapter/track/file or to return to the beginning of the current chapter/track/file.
yy The file requirements are described on page
yy The thumbnail of the unplayable files can
Press C twice briefly to step back to the previous chapter/track/file.
be displayed, but those cannot be played on this player.
In the file list menu of a server, there may have many types of contents in a folder together. In this case, press C or V to go to the previous or next content with same type.
yy The subtitle file name and movie file name
have to be the same and located at the same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA server, install the
supplied Nero MediaHome 4 on your PC. (see page 57)
Operating 40 · Operating

Resume playback eroyt u
The unit records the point where you pressed the Z (STOP) depending on the disc. If “MZ (Resume Stop)” appears on the screen briefly, press d (PLAY) to resume playback (from the scene point). If you press Z (STOP) twice or unload the disc, “Z(Complete Stop)” appears on the screen. The unit will clear the stopped point.
Press d (PLAY) to start slide show.
Press Z (STOP) while slide show.
Press M (PAUSE) while slide show. Press d (PLAY) to re-start the slide show.
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER), B (OPEN/CLOSE), etc).
While viewing a photo in full screen, press A or D to go to the previous or next photo.
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in Complete Stop mode .
The menu screen may be displayed first after loading a disc which contains a menu. If you want to display the disc menu while playback, press DISC MENU.
This unit memorizes the last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the unit or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.
Use W/S/A/D buttons to navigate through menu items.
Some BD-ROM discs contain Pop-up menu that appears while playback.
yy Last Scene Memory function for a previous
Press TITLE/POPUP while playback, and use W/S/ A/D buttons to navigate through menu items.
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before commencing to play it.
Operating 41 · Operating

Repeat Playback erotu y
This player can repeat a portion you have selected.
During playback, press REPEAT (h) repeatedly to select a desired repeat mode.
Blu-ray Disc / DVD / Movie files
jA- – Selected portion will be repeated continually.
jChapter – The current chapter will be played back repeatedly.
yy You cannot select a portion less than 3
seconds.
jTitle – The current title will be played back repeatedly.
yy This function may not work on some disc or
title.
jAll – All the tracks or files will be played back repeatedly.
To return to normal playback, press REPEAT (h) repeatedly to select [Off].
The player can display the content information.
;Track– The current track or file will be played back repeatedly.
:All – All the tracks or files will be played back repeatedly.
l – The tracks or files will be played back in random order.
The file information appears on the screen.
l:All – All the tracks or files will be played back repeatedly in random order.
While movie playback, you can display the file information by pressing TITLE/POPUP.
kA-B – Selected portion will be repeated continually. (Audio CD only)
The information displayed on the screen may not correct comparing actual content information.
To return to normal playback, press CLEAR.
yy If you press V once during Repeat
Chapter/Track playback, the repeat playback cancels.
yy This function may not work on some disc or
title.
Operating 42 · Operating · Audio CDs/Music files

Selecting a subtitle file y
On the [Movie], [Music] or [Photo] menu, you can change the content list view.
If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie.
Press red (R) colored button repeatedly.



Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when you play the movie file.
yy If you press Z (STOP) while playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.

Operating 43 · Operating

Listening to music while slide show i
You can use various options during viewing a photo in full screen.
You can display photo files while listening to music files.

Device that you can select are differ depending on the location of the photo file you are displaying in full screen.
Photo location Available Device
Disc, USB Disc, USB
a Current photo/Total number of photos
DLNA server DLNA server
– Use A/D to view previous/next photo.
b Slide Show – Press ENTER (b) to start or
pause slide show.

c Music Select – Select the background
music for the slide show (page 44).
d Music –Press ENTER (b) to start or pause
background music.
e Rotate – Press ENTER (b) to rotate the
photo clockwise.
f Zoom – Press ENTER (b) to display the
Select g and press ENTER (b) to display the upper directory.
[Zoom] menu.
g Effect – Use A/D to select a transition
effect between photos in a slide show.
h Speed – Use A/D to select a delaying
When selecting music file from a server, folder selection is not available. Only file selection is available.
speed between photos in a slide show.
Operating · Operating

You can display and adjust various information and settings about the content.
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on
discs or titles.
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on the screen but prohibited to be changed.

a Title – current title number/total number of
b Chapter – current chapter number/total
c Time – elapsed playing time/total playback
d Audio – selected audio language or channel
e Subtitle – selected subtitle.
f Angle – selected angle/total number of
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode

Hearing a different audio eroy
For example, to find a scene at 2 hours, 10 minutes, and 20 seconds, enter “21020”.
yy Some discs allow you to change audio
selections only via the disc menu. In this case, press TITLE/POPUP or DISC MENU button and choose the appropriate audio from the selections on the disc menu.
Press A/D to skip the playback 60 seconds forward or backward.
yy Immediately after you have switched sound,
there may be a temporary discrepancy between the display and actual sound.
yy This function may not work on some disc or
titles.
yy On BD-ROM disc, the multi audio format
yy This function may not work depending on
(5.1CH or 7.1CH) is displayed with [MultiCH] in the on-screen display.
the file type and ability of the DLNA server.
yy You can select the [Audio] option on the
On-Screen display directely by pressing AUDIO button.
Watching from a different angle er
If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback.
yy Some discs allow you to change subtitle
selections only via the disc menu. If this is the case, press TITLE/POPUP or DISC MENU button and choose the appropriate subtitle from the selections on the disc menu.
yy You can select the [Subtitle] option on the
On-Screen display directely by pressing SUBTITLE button.
Operating 46 · Operating

Changing the Picture Mode eroy
You can change the TV aspect ratio setting while playback.
You can change the [Picture mode] option while playback.
Even if you change the value of the [TV Aspect Ratio] option in On-Screen display, the [TV Aspect Ratio] option in the [Setup] menu is not changed.

If the subtitle is displayed in broken letter, you can change the subtitle code page to view the subtitle file properly.
Select [Default] option then press ENTER (b) to reset the all video adjustments.


Operating 47 · Operating

Be sure that the antennas are connected. (Refer to the page 21)
Press and hold CLEAR for two seconds. “ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted.
Presetting the Radio Stations
Press B (blue) (MONO/STEREO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception.
You can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume.
The FM tuner is supplied with the RDS (Radio Data System) facility. This shows information about the radio station being listened to. Press RDS repeatedly to cycle through the various data types:
(Programme Service Name) The name of the channel will appear in the display
(Programme Type Recognition) The programme type (e.g. Jazz or News) will appear in the display.
(Radio Text) A text message contains special information from the broadcast station. This text may scroll across the display.
(Time controlled by the channel) This shows the time and date as broadcast by the station.
Operating 48 · Operating

Using the LG Apps
You can use various content services via Internet with the Premium feature.
You can use the LG application services on this player via Internet. You can easily find and download various applications from LG App store.
Depending on the region, the LG Apps service may not be available at the moment. The service will become available in these regions through at software update.


yy Detailed information of each service,
contact to the content provider or visit suppot link of the service.
yy The content of Premium services and
service related information, including user interface, is subject to changes. Please refer to the web site of each service for most up- to-date information.
yy When you are first time to access [Premium]
or [LG Apps] feature, current country setting appears. If you want to change the country setting, select [EDIT] and press ENTER (b).
To install an application to the player, user needs to sign in. Refer to page 50 for more information of signning in.
To install a paid application, you need to be a paid member. Visit www.lgappstv.com for more information.
Operating 49 · Operating

Managing my Apps
To use the [LG Apps] feature, you need to sign in with your account.
You can move or delete an installed application in the [My Apps] menu.
If you do not have an account, press red (R) colored button to register.
If you select the [Auto Sign In] check box, your ID and password are remembered and automatically signed in without entering them.
yy If you want to sign in with other account,
press red (R) colored button on [LG Apps] or [My Apps] screen, and select [Change User] option.
yy To view the information of your account and
applications, press red (R) colored button on [LG Apps] or [My Apps] screen, and select [Account Setting] option.
Operating 50 · Operating

The Power does not turned on. yy Plug the power cord into the wall outlet securely.
The unit does not start playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Insert the disc with the playback side down.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The angle cannot be changed. yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or music files.
yy The files are not recorded in a format that the unit can play.
yy The unit does not support the codec of the movie file.
The remote control does not work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the power will not turn on or off.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again. The unit is not operating normally.
Troubleshooting 51 · Troubleshooting

BD-Live feature does not work. yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 24).
yy Your broadband speed may not fast enough to use the BD-LIVE
features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such as YouTube™, etc.) are often stopped or “buffer” during playback.
Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Media servers are not displayed on the device list.
yy The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your media server.
yy The player is not connected to the local area network that your media
server is connected.
Access point is not displayed on the “Access point name” list.
Your network device such as access point may not set with available frequency range and channel that this player can support. Try setting the frequency range and channel on the network device setting.
Troubleshooting 52 · Troubleshooting

There is no picture. yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears yy You are playing a disc recorded in a colour system that is different
from your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable with Ethernet).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Setup] menu is set to [Off].
Set the option to [On].
There is no sound or the sound is distorted.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
yy Check the speaker cable connection. (page 17)
You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://www.lg.com/global/support or contact LG Electronics customer care centre.
To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please visit http://opensource.lge.com All referred license terms, warranty disclaimers and copyright notices are available to download with the source code.
Troubleshooting 53 · Troubleshooting

You can operate your TV with the supplied remote control. If your TV is listed in the table below, set the appropriate manufacturer code.
You can control your TV using the buttons below.
Zenith 1, 3, 4
By pressing You can
1 (TV POWER) Turn the TV on or off.
Switch the TV’s input source between the TV and other input sources.
PR/CH W/S Scan up or down through memorized channels.
Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.
VOL +/– Adjust the volume of the TV.
MUTE Turn the TV’s volume on or off.
Depending on the unit being connected, you may not be able to control your TV using some of the buttons.

You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server.
From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows.
yy Before updating the software in your player,
remove any disc and USB Device from the player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure,
do not turn off the player or disconnect AC power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.

[OK] Starts the software update.

[Cancel] Exits the update menu and turns the power off.
If the software update is available from the update server, the “Software Update” icon appears in the Home menu. Press blue (B) colored button to start the update procedure.
The player will check for the newest update.
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER (b) to return to the [Home Menu].
Appendix 55 · Appendix

Do not turn off the power during the software update.
If the software includes the driver update, disc tray may open during the process.
The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Centre then update your player. Refer to “Customer Support” on page 53.
Appendix 56 · Appendix

yy Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® 7 (no Service Pack required), Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003
Nero MediaHome 4 Essentials is a software for sharing movie, music and photo files stored on your computer to this player as a DLNA-compatiable digital media server.
yy Windows Vista® 64-bit edition (application runs
yy Windows® 7 64-bit edition (application runs in
yy The Nero MediaHome 4 Essentials CD-
ROM is designed for PCs and should not be inserted in this player or in any product other than a PC.
typical installation of Nero MediaHome stand- alone
yy The supplied Nero MediaHome 4 Essentials
yy 1.2 GHz Intel® Pentium® III or AMD
CD-ROM is a customized software edition only for sharing files and folders to this player.
yy Graphics card with at least 32 MB video memory,
yy The supplied Nero MediaHome 4 Essentials
minimum resolution of 800 x 600 pixels, and 16- bit color settings
software does not support following functions: Transcoding, Remote UI, TV control, Internet services and Apple iTunes
yy Windows® Internet Explorer® 6.0 or higher
yy The supplied Nero MediaHome 4 Essentials
yy DirectX® 9.0c revision 30 (August 2006) or higher
software can be downloaded at http://www lg.com/global/support Find the download link on the web page of this product.
yy This manual explains operations with
yy Mac OS X 10.5 (Leopard) or 10.6 (Snow Leopard)
the English version of Nero MediaHome 4 Essentials as examples. Follow the explanation referring to the actual operations of your language version.
yy Macintosh computer with an Intel x86 processor
typical installation of Nero MediaHome stand- alone

Start up your computer, and insert the supplied CD- ROM disc into your computer’s CD-ROM drive. An installation wizard will walk you through the quick and uncomplicated installation process. To install Nero MediaHome 4 Essentials, proceed as follows:
On your computer, you must share the folder contained movie, music and/or photo content to play them on this player.
This parts explains the procedure for selecting the shared folders on your computer.
yy If the shared folders or files are not displayed
on the player, click the folder on the [Local Folders] tab and click [Rescan Folder] at the [More] button.
yy Visit www.nero.com for more information
Appendix 58 · Appendix · and software tools

Choose an area code from this list.
Area Code Area Code Area Code Area Code

Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Language Code Language Code Language Code Language Code
Dutch 7876 English 6978

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio | Essential is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association.
“DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.
Java is a trademark of Oracle and/or its affiliates.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
Appendix 61 · Appendix

This product uses Cinavia technology to limit the use of unauthorized copies of some commercially- produced film and videos and their soundtracks. When a prohibited use of an unauthorized copy is detected, a message will be displayed and playback or copying will be interrupted.
More information about Cinavia technology is provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com To request additional information about Cinavia by mail, send a postcard with your mailing address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology under license from Verance Corporation and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued and pending as well as copyright and trade secret protection for certain aspects of such technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited.
Appendix 62 · Appendix

PCM Stereo PCM Multi-Ch DTS Re-encode *3 BitStream *1 *2
Dolby Digital PCM 2ch PCM 5.1ch DTS Dolby Digital
Dolby Digital Plus PCM 2ch PCM 5.1ch DTS Dolby Digital Plus
Dolby TrueHD PCM 2ch PCM 5.1ch DTS Dolby TrueHD
DTS PCM 2ch PCM 5.1ch DTS DTS
DTS-HD PCM 2ch PCM 5.1ch DTS DTS-HD
Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch
Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 5.1ch
Linear PCM 7.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 7.1ch
*1 The secondary and interactive audio may not be included in the output bitstream if [Digital Output] option is set to [BitStream]. (Except LPCM Codec : the output always include interactive and secondary audio.)
yy The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD while playback.
yy With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not be heard if the [Digital Output] option is set to [BitStream].
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected HDMI device even though [Digital Output] option is set to [BitStream].
yy If the audio format of the digital output does
not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
*3 If the [Digital Output] option is set to [DTS re- encode], the audio output is limited to 48 kHz and 5.1Ch. If the [Digital Output] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the original audio is outputted for the other discs (like [BitStream]).
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver is equipped with a Digital Multi-channel decoder.
yy This setting is not available on the input signal
from an external device.

Power requirements Refer to main label.
Power consumption Refer to main label.
Dimensions (W x H x D) Approx. 360 X 60.5 X 297 mm
Net Weight (Approx.) 2.7 kg
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 5 % to 90 %
VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) x 1
ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL) 3 V (p-p), Optical jack x 1
PORT. IN 0.5 Vrms (3.5 mm stereo jack) x 1
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Power output, (RMS), THD 10 %
Front 141 W x 2
Rear 141 W x 2
Sub-Woofer 145 W (Passive)


Frequency response 20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB) DC 5 V 0 500 mA
Type 1 Way 1 Speaker Max. Input power 282 W
Impedance Rated 3 Ω Net Dimensions (W x H x D) 88 x 197 x 79 mm
Type 1 Way 1 speaker Max. Input power 282 W
Impedance Rated 3 Ω Net Dimensions (W x H x D) 88 x 197 x 79 mm
Type 1 Way 1 Speaker Max. Input power 282 W
Impedance Rated 3 Ω Net Dimensions (W x H x D) 300 x 88 x 64 mm
Type 1 Way 1 speaker Max. Input power 290 W
Impedance Rated 3 Ω Net Dimensions (W x H x D) 133 x 352 x 325 mm
yy Design and specifications are subject to change without notice.
Appendix 65 · Appendix

Handling the Unit
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Keeping the exterior surfaces clean
Cleaning Discs
To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center to out.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. For details, please contact your nearest authorized service center.
Appendix 66 · Appendix

All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated.
The availability of and access to Content and Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services.
Should you have any inquiry or problem related to the Content or Services, you may refer to the Service Provider’s website for the most up-to- date information. LGE is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service Providers.
Please note that LGE is not responsible for any Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.
Appendix 67 · Appendix


Pages referenced in this manual — manufacturer, support and downloads.
Common problems, likely causes, and what to do.
| Problem | Possible cause | Remedy | |
|---|---|---|---|
| The Power does not turned on. | yy Plug the power cord into the wall outlet securely. | p.51 | |
| The unit does not start playback. | yy Insert a playable disc. (Check the disc type, color system, and regional code.) yy Insert the disc with the playback side down. yy Clean the disc. yy Cancel the Rating function or change the rating level. | p.51 | |
| The angle cannot be changed. | yy Multi-angles are not recorded on the DVD Video being played. | p.51 | |
| Cannot play movie, photo or music files. | yy The files are not recorded in a format that the unit can play. yy The unit does not support the codec of the movie file. | p.51 | |
| The remote control does not work properly. | yy The remote control is not pointed at the remote sensor of the unit. yy The remote control is too far from the unit. yy There is an obstacle in the path of the remote control and the unit. yy The batteries in the remote control are exhausted. | p.51 | |
| The unit is plugged in, but the power will not turn on or of.f | You can reset the unit as follows. yy Unplug the power cord, wait at least five seconds, and then plug it in again. | p.51 | |
| The unit is not operating normally. | p.51 | ||
| BD-Live feature does not work. | yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 24). yy Your broadband speed may not fast enough to use the BD-LIVE features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. yy The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. | p.52 | |
| Streaming video services (such as YouTube™, etc.) are often stopped or “bufefr” during playback. | Your broadband service speed may not be fast enough to stream video services. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. | p.52 | |
| Media servers are not displayed on the device list. | yy The firewall or anti-virus software on your media server is running. Turn off the firewall or anti-virus software running on your media server. yy The player is not connected to the local area network that your media server is connected. | p.52 | |
| Access point is not displayed on the “Access point name” list. | Your network device such as access point may not set with available frequency range and channel that this player can support. Try setting the frequency range and channel on the network device setting. | p.52 | |
| There is no picture. | yy Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. yy Connect the video connection securely. yy Check the [HDMI Color Setting] in the [Setup] menu is set to the appropriate item that conforms to your video connection. yy Your TV may not support the resolution you have set on the player. Change the resolution that your TV accepts. yy The player’s HDMI OUT jack is connected to a DVI device that does not support copyright protection. | p.53 | |
| Picture noise appears | yy You are playing a disc recorded in a colour system that is difefrent from your TV. yy Set the resolution which your TV accepts. | p.53 | |
| Blu-ray 3D disc playback does not output 3D views. | yy Connect the player to your TV with HDMI cable (Type A, High Speed HDMI™ Cable with Ethernet). yy Your TV may not support “HDMI 3D mandatory format”. yy The [3D Mode] option in the [Setup] menu is set to [Off]. Set the option to [On]. | p.53 | |
| There is no sound or the sound is distorted. | yy The unit is in scan, slow motion, or pause mode. yy The sound volume is low. yy Check the speaker cable connection. (page 17) | p.53 |
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.