Instruction/ maintenance manual of the product CAM2 Bogen
Go to page of 15
CAM2 Mix er/Pre-Amplifier Installation and Use Manual © 200 1 Bogen Communications, Inc. All rights reserved. Specifications subject to change. 54-2039-0 1 R2 Printed in K orea. 0 11 2 50 Spring Street, Ramse y , NJ 07446, U.S.A. T el: 20 1 -934-8500 Fax: 20 1 -934-9832; www .
Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. How ev er , information is subject to change. Important Safety Information Alwa ys follow these basic safety pr ecautions when installing and using the unit: 1 .
Specifications Rated Output Le vels Bal Out +4dBu or -50dBu (switch selected) Line Out 0dBu Fr equency Response +/- 1 dB 20Hz to 20kHz Distortion at Rated Output Less than .
Operation Po wer This switch applies po wer to the unit.The Switch Actuator will light to indicate pow er "ON" when connected to an A C power sour ce . MIC Gain Contr ol The four MIC v olume contr ols are used to adjust the le vel of individual mic input channels.
P anel Descriptions Fr ont P anel 1 . Input Over V olta ge LEDs (Clipping LED) - LED will light when input is ov erdriven. 2. MIC Channel Gain Controls - Contr ols the gain levels of the MIC channels. 3. AUX Gain Contr ol - Controls the gain lev el of the AUX input.
Input Connections Micr ophone Inputs Microphones ar e connected to the C AM2 using the MIC 1 through MIC 4 connectors. The C AM2 uses male XLR type connectors for making connections to its inputs.
Output Connections B AL/OUT to Balanced Input of Other Equipment The CAM2 provides a balanced output signal fr om the male XLR connector labeled BAL/OUT . Man y types of professional equipment, lik e power amplifiers, hav e balanced inputs that are compatible with this output.
Output Connections B AL/OUT to Balanced Input of Other Equipment The CAM2 provides a balanced output signal fr om the male XLR connector labeled BAL/OUT . Man y types of professional equipment, lik e power amplifiers, hav e balanced inputs that are compatible with this output.
Input Connections Micr ophone Inputs Microphones ar e connected to the C AM2 using the MIC 1 through MIC 4 connectors. The C AM2 uses male XLR type connectors for making connections to its inputs.
P anel Descriptions Fr ont P anel 1 . Input Over V olta ge LEDs (Clipping LED) - LED will light when input is ov erdriven. 2. MIC Channel Gain Controls - Contr ols the gain levels of the MIC channels. 3. AUX Gain Contr ol - Controls the gain lev el of the AUX input.
Operation Po wer This switch applies po wer to the unit.The Switch Actuator will light to indicate pow er "ON" when connected to an A C power sour ce . MIC Gain Contr ol The four MIC v olume contr ols are used to adjust the le vel of individual mic input channels.
Audio System Le v el Setting System Lev els In audio systems that employ separate mix ers and amplifiers, ther e are quite a f ew contr ols that affect the volume of a signal. Knowing how to set these differ ent volume controls is instrumental to pr oper system operation.
Specifications Rated Output Le vels Bal Out +4dBu or -50dBu (switch selected) Line Out 0dBu Fr equency Response +/- 1 dB 20Hz to 20kHz Distortion at Rated Output Less than .
Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. How ev er , information is subject to change. Important Safety Information Alwa ys follow these basic safety pr ecautions when installing and using the unit: 1 .
CAM2 Mix er/Pre-Amplifier Installation and Use Manual © 200 1 Bogen Communications, Inc. All rights reserved. Specifications subject to change . 54-2039-0 1 R2 Printed in K orea. 0 11 2 50 Spring Street, Ramsey , NJ 07446, U.S.A. T el: 20 1 -934-8500 Fax: 20 1 -934-9832; www .
An important point after buying a device Bogen CAM2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bogen CAM2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bogen CAM2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bogen CAM2 you will learn all the available features of the product, as well as information on its operation. The information that you get Bogen CAM2 will certainly help you make a decision on the purchase.
If you already are a holder of Bogen CAM2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bogen CAM2.
However, one of the most important roles played by the user manual is to help in solving problems with Bogen CAM2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bogen CAM2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
