Instruction/ maintenance manual of the product S4 BlueAnt Wireless
Go to page of 40
User Guide TRUE HANDSFREE VOICE CONTROLLED CAR SPEAKERPHONE.
.
ENGLISH 3 Contents Introduction 6 Remove the Pr otective Cover 7 Charge Y our S4 7 Pair the S4 with your Phone 8 Install the S4 in your Car 10 Using the Handsfree T rigger 11 Handsfr.
4 Automaticall y T ransferring your Phonebook Contacts to the S4 17 Manually T ransferring your Phonebook Contacts t o the S4 17 Updating your Phonebook Contacts on the S4 18 Listening to Aud.
ENGLISH 5 Apple ® iPhone ® 26 BlackBerry 27 Other Models 27 T roubleshooting 28 Resetting the S4 33 Specifi cations 34 Help and Support 35 T erms and Conditions 36.
6 Intr oduction The S4 speakerphone is the fi rst true handsfr ee voice contr olled Bluetooth c ar speakerphone. There is no need t o take your hands off the wheel or y our eyes off the r oad to use the S4. Simply say the trigger phrase BlueAnt Speak T o Me™ and the S4 will be ready for y our voice commands.
ENGLISH 7 Remove the Pr otective Cov er The plastic cov er on your S4 is intended to pr otect it during transit. Please r emove it bef ore using your S4.
8 Pair the S4 with your Phone T o use the S4 you need to pair it with your phone. 1. Slide the power switch on the side of the S4 to the ON position. 2. If this is the fi rst time you have used the S4 it will go straight to pairing mode. The v oice pr ompts will start to talk you thr ough the pairing process and the light will fl ash blue.
ENGLISH 9 BlackBerry ® If you ar e using a BlackBerry smartphone you may see a message lik e this one. Select “Don’t ask this again” so that a tick appears in the bo x, and then choose “YES”. Android ™ On Android de vices a message about the phonebook tr ansfer may appear in the notifi cations area at the top of the scr een.
10 Install the S4 in your Car 1. Slide the sun visor clip onto the edge of the car sun visor . Y our S4 is supplied with a choice of visor clips so you can select the mos t appropriat e one for your vehicl e. 2. Attach the magnetic back of the S4 to the fi xed sun visor clip.
ENGLISH 11 Using the Handsfr ee T rigger Y our S4 is designed to be a true handsfree de vice. Simply say the trigger phr ase BlueAnt Speak T o Me and the S4 will be ready t o rec eive your voic e commands. When the S4 asks you to Say A Command , immediatel y say one of the voice c ommands loudl y and clearl y .
12 Handsfr ee T rigger Battery Saving Mode Using the handsfree trigger giv es you true handsfr ee operation, as the S4 is always list ening for your voic e. If you want your S4 to run f or longer between char ges, slide the power switch to the middle position to activ ate “battery saving mode”.
ENGLISH 13 Reconnecting to the S4 T o save battery , the S4 goes into “sleep mode” when y ou are not using it. If you take y our phone out of range of the S4 for mor e than 2 minutes, the handsfree trigger switches off and “sleep mode” is activat ed.
14 Use Y our V oice to Mak e Phone Calls Say BlueAnt Speak T o Me and wait for the S4 to ask you to Say A Command , then: > Say Phone Commands to activate the voic e dial feature on your phone (if your phone supports v oice dialing). > Say Redial to r edial the last number you call ed on your phone.
ENGLISH 15 Lis t of V oice Commands When you want to do something, just say BlueAnt Speak T o Me , wait for the S4 to ask y ou to Say A Command , and then say one of the foll owing commands: > Am I Connected? — The S4 will check if your phone is connected, and att empt to connect if it is not.
16 change the numbers associated with e xisting contacts, then y ou will need to use this command to tr ansfer the updated contacts t o the S4. > What Can I Say? — Reads out a list of all the commands availabl e on the current menu.
ENGLISH 17 T ransf erring your Phonebook Contacts to the S4 Y our S4 uses T ext T o Speech technology (TTS) to r ead out the name of the person who is calling you.
18 individually). 3. Select the option on your phone t o “send” or “beam” contacts, business c ards, or v-c ards via Bluet ooth, and select the S4 fr om the list of Bluetooth devices. See your phone’ s manual for help with this step. Note: some phones do not support phonebook transfer s at all.
ENGLISH 19 Listening to Audio The S4 supports A2DP audio str eaming. If your phone supports the A2DP pr ofi le then simply start playing music or any other audio (including turn-by-turn directions fr om a GPS application on your phone) and it will automaticall y transfer to the S4.
20 Adjusting the V olume The volume contr ols are touch sensitive. Swipe your fi nger across the t op of the S4 to adjust the volume. Y ou can also adjust the volume by pres sing and holding the - or + symbols. Y ou can adjust the volume during calls, during music playback and you can also adjust the v olume of the audio prompts.
ENGLISH 21 Using 2 Phones with the S4 (Multipoint) Up to 2 devices c an connect to the S4 at the same time. If either phone rings, you c an answer it with the S4.
22 Multiple Calls (Call W aiting)* If you r eceive an incoming c all while you ar e already on a call the S4 will play a tone t o alert you. > Pres s the + symbol on the S4 for about 1 second t o put your curr ent call on hold and answer the incoming c all.
ENGLISH 23 Switching the S4 On and Off T o switch the S4 on or off, use the hardwar e power switch located on the side of the de vice. > Slide the switch to the ON position to use the S4 in handsfr ee trigger mode. > Slide the switch to the position to use the S4 in battery saving mode.
24 F unction Refer ence > Standby Mode means connected to a de vice but not on a call. > Idle Mode means the S4 is on but not c onnected to any devices.
ENGLISH 25 S4 Function Do This When Answer a call T ap the BlueAnt symbol Ringing End a call T ap the BlueAnt symbol Active call Reject a call Double tap the BlueAnt symbol Ringing Hold active call an.
26 Phone Specifi c Tips and T ricks Android > Please note that v oice dialing over Bluet ooth was added to the Android Oper ating System in version 2.2. It will not be possibl e to use Phone Commands unles s your Andr oid device is running Andr oid OS 2.
ENGLISH 27 to the “Mail, Contacts, Cal endars” section in the “Settings” menu on your phone and change both the “Sort Order” and “Display Or der” to “First, Last”. Once y ou have changed this setting, you must use the Update Phonebook command to copy the phonebook t o the S4 again.
28 T roubl eshooting I Cannot T ransfer my Phonebook to the S4 In order t o transfer your phonebook t o the S4, your phone must support either the Phonebook Acc ess Pr ofi le (PBAP), A T commands, or the Object Push Profi le (OPP).
ENGLISH 29 If this is happening, you can r esolve it by changing the setting on your phone that c ontrols the display and sort order of y our contacts.
30 The S4 Reads Out the Wrong Name If the S4 is reading out the wr ong name then it is likely that you hav e changed the contacts in your phone without updating the contacts on the S4. If you mak e any changes to your phonebook, use the Update Phonebook command to copy these changes t o the S4.
ENGLISH 31 My Phone Prompts me f or a Code when I Pair the S4 Enter the code 0000 (f our zeros). My Phone Prompts me t o Confi rm the Connection to the S4 If your phone always pr ompts you to confi .
32 The S4 Does Not Respond to my V oice Commands If you ar e having troubl e getting the S4 to respond to your voic e commands, try the following tips: > Say your command as soon as pos sible after the S4 asks you t o Say A Command .
ENGLISH 33 > If you take the S4 out of r ange of your phone, then it will play a tone to indic ate that it is no longer connect ed. > The S4 plays a tone when you end a call. > The S4 plays a call waiting tone if you r eceive an incoming call whil e you are on a call.
34 T o reset the S4: 1. Delete any e xisting pairing information fr om your phone and turn it off and back on again to refr esh the phone memory . 2. Make sur e the S4 is switched on but not connected to any phones. 3. Pres s and hold the + and - symbols for about 6 seconds, until the S4 announc es that it has been reset.
ENGLISH 35 > T alk Time: Up to 20 hours > Standby Time: Up to 700 hours with handsfr ee trigger in battery saving mode > Charging Time: 3 - 4 hour s > Battery T ype: Rechargeable Lithium Ion Help and Support If you ar e having troubl e getting the S4 to work, please visit www.
36 T erms and Conditions By using this product, y ou are agr eeing to BlueAnt’ s terms and conditions, availabl e at www.blueantwirel ess.com and on the supplied warranty information car d. Please pr otect your ears. All BlueAnt devices ar e designed to r each volumes of up to 100 decibels.
ENGLISH 37.
38.
.
BlueAnt www .blueantwir eless.c om Email Enquiries customer care@blueantwir eless.c om North America 1866 891 3032 Australia 1300 669 049 New Zealand 0800 443 122.
An important point after buying a device BlueAnt Wireless S4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BlueAnt Wireless S4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BlueAnt Wireless S4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BlueAnt Wireless S4 you will learn all the available features of the product, as well as information on its operation. The information that you get BlueAnt Wireless S4 will certainly help you make a decision on the purchase.
If you already are a holder of BlueAnt Wireless S4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BlueAnt Wireless S4.
However, one of the most important roles played by the user manual is to help in solving problems with BlueAnt Wireless S4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BlueAnt Wireless S4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
