Instruction/ maintenance manual of the product ACT-IR100M ACTiSYS
Go to page of 18
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M+/100M/100MP IrDA IR Printer Adapter User’s Manual I ACTiSYS Corp. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)Thi.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP IMPORTANT – COMPATIBILITY We appreciate all of our honorable users of this product will read this com patibility list carefully.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP TABLE OF CONTENTS 1 INTRODUCTION ................................................................................................................... ............................ 5 2 PARTS CHECK LIST .
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 1 INTRODUCTION The ACT-IR100M+ is the only Two-in-One IrDA parallel printer adapter t hat allows a mobile devi ce to print directly via infrared. A m obile device user can print out via infrared port and he can also print out via paral lel port from desktop PC.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 1: ACT-IR100M+ ACT-IR100M+ LED Status Definition Name Status Meanings Off Before Detecting IR Device Flash Slowly IR Signal Detected LED On IR Communicating Release 3.2, August 20, 2003 6 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 2: ACT-IR100M ACT-IR100M LEDs Definition Name Status Meanings Infrared LED (green) Flash Stand-by for transmission Parallel LED (green) On or Flashes fast Printing through the infrared port Power LED (red) On Power on Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 3: ACT-IR100MP ACT-IR100MP LED Status Definition Name Status Meanings Off Before Detecting IR Device Flash Slowly IR Signal Detected LED On IR Communicating Release 3.2, August 20, 2003 8 © Copyright ACTiSYS Corporation 1999-2003.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 2 P ARTS CHECK LIST When you unpack the package, the following ite ms should be found. 1. ACT-IR100MB or ACT-IR 100M or ACT-IR100MP 2. ACT-IR220L+ only for ACT-IR 100M+ 3. 7.5V AC Adapter, inside pos itive if ACT-IR100MB or ACT-IR100M 4.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 3 SYSTEM REQUIREMENTS To use ACT-IR100M+/IR100M /IR100MP, you MUST meet the following requireme nts. Your PC which using passing t hrough: • A Centronics paralle l port. • A cable connecting your PC Centronics port and IR100M+/IR 100M/IR100MP Centroni cs 36F port.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 4 SETUP Figure 3: Connection Diagram with Passing Thru Figure 4: Connection Diagram without Passing Thru Release 3.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Figure 5. Align Diagram Setting Up Your Printer/IR100M+/IR100M/IR100MP/PC (If you use the pass through functi on) 1. Turn Off both your comput er and printer. 2. Connect ACT-IR220L+ to ACT-IR 100M+ only if you have IR100M+.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 5 TROUBLESHOOTING AND COMP A TIBLE PRINTERS LIST For help on general and miscel laneous problems y ou may be experiencing wit h your printing, refer to the following pages for possible solutions. Look up your probl em and try the solut ion.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACT-IR100M Trouble Shooti ng Table IF your IR100M version is v2.2 or below, you MUST follow the power sequence. Problem Solut ion The power LED is not on. 1 Be sure there is 110V AC power supply to your wall outlet.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 6 SPECIFICA TIONS Model: ACT-IR100M+/100M/ 100MP Carrier: Infrared radiation (peak wavelengt h: 850 to 1050 nm) IrDA SIR Transmission Speed: 9.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP 7 W ARRANTY INFOMA TION THE FOLLOWING WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP ACTiSYS Corporation warrants t o the first consumer purchaser, for a period of 1 year from the date of purchase, that this wireless interface (The P.
ACTiSYS Corp. IR Printer Adapter IR100M+/100M/100MP Release 3.2, August 20, 2003 18 © Copyright ACTiSYS Corporation 1999-2003. All Rights Reserved 8 CONT ACT INFORMA TION ACTiSYS Corporation. 48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.
An important point after buying a device ACTiSYS ACT-IR100M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTiSYS ACT-IR100M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTiSYS ACT-IR100M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTiSYS ACT-IR100M you will learn all the available features of the product, as well as information on its operation. The information that you get ACTiSYS ACT-IR100M will certainly help you make a decision on the purchase.
If you already are a holder of ACTiSYS ACT-IR100M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTiSYS ACT-IR100M.
However, one of the most important roles played by the user manual is to help in solving problems with ACTiSYS ACT-IR100M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTiSYS ACT-IR100M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
