Instruction/ maintenance manual of the product BCGC74 - BCGC52 Blanco
Go to page of 15
MODELS: BCGC74 - BCGC52 CRYSTAL GLASS COOKTOP We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset. The appliance must be installed only by an authorised person in compliance with the instructions provided.
2 Natural U-LPG 1 Ultra rapid gas burner of 11.9 MJ 11.9 MJ 2 Semirapid gas burner of 6.3 MJ 6.3 MJ 3 Auxiliary gas burner of 3.6 MJ 3.6 MJ 4 Cast iron trivet 1 burner 5 Cast iron trivet 2 burner 6 Ca.
3 1) BURNERS A diagram is screen-printed above each knob on the front panel. This diagram indicates to which burner the knob in question corresponds. After having opened the gas mains or gas bottle ta.
4 USE Notes: Use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping the natural air vents clear (fig. 3) and by activating the mechanical aeration device (rangehood or electric fan fig.
5 CLEANING IMPORTANT: Always disconnect the appliance from the gas and electricity mains before carrying out any cleaning operation. 2) HOT PLATE Periodically wash the hot plate, the cast iron pan support, the enamelled burner caps “C” and the burner heads “M” (see fig.
6 TECHNICAL INFORMATION FOR THE INSTALLER This appliance shall be installed only by authorised personnel and in accordance with the manufacturer’s installation instructions, local gas fitting regula.
5) LOCATION AND VENTILATION Ventilation must be in accordance with AS5601/AG 601 – Gas Installations. In general, the appliance should have adequate ventilation for complete combustion of gas, proper flueing and to maintain temperature of immediate surroundings within safe limits.
8 INSTALLATION 7) ELECTRICAL CONNECTION The appliance is supplied with a 1800 mm long flexible supply lead. The point of attachment for this lead is located at the rear and on the underside of the appliance 380 mm from the right hand side. The voltage and power consumption are detailed on the underside of the appliance.
9 Always disconnect the appliance from the electricity main before making any adjustments. All seals must be replaced by the technician at the end of any adjustments or regulations. Our burners do not require primary air adjustment. 8) TAPS Our taps are suitable for all gas, they are male conical type.
10 9) U-LPG TO NATURAL GAS CONVERSION PROCEDURE Appliance models: Gas crystal glass hotplate models: BCGC74 4 Burners BCGC52 2 Burners 1. Remove each burner cap and burner skirt. 2. Remove the U-LPG main injector with a 7 mm/VF tube spanner and replace with the appropriate size Natural Gas main injector for each burner.
11 CONVERSIONS FIG. 14 BURNER ARRANGEMENT ON THE HOT PLATE U-LPG 2.75 95 11.9 NATURAL 1.00 155 11.9 U-LPG 2.75 70 6.3 NATURAL 1.00 112 6.3 BURNERS N° DESCRIPTION GAS NORMAL PRESSURE INJECTOR DIAMETER NOMINAL HEAT INPUT (MJ/h) (kPa) (1/100 mm) MAX. TABLE U-LPG 2.
12 SERVICING WARNING: Always disconnect the appliance from the electricity and gas mains before proceeding with any servicing operation. Servicing should be carried out only by authorised personnel.
13 SERVICING TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY CABLE TYPES AND SECTIONS ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig. 21) and comply with the recommendations given in paragraph 8.
TECHNICAL ASSISTANCE AND SPARE PARTS MEA – BLANCO TECHNICAL ASSISTANCE AND SPARE PARTS 14 NEW SOUTH WALES Head Office, Sales & Marketing Office 104 Vanessa Street Kingsgrove NSW 2208 Telephone: .
16.
An important point after buying a device Blanco BCGC74 - BCGC52 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Blanco BCGC74 - BCGC52 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Blanco BCGC74 - BCGC52 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Blanco BCGC74 - BCGC52 you will learn all the available features of the product, as well as information on its operation. The information that you get Blanco BCGC74 - BCGC52 will certainly help you make a decision on the purchase.
If you already are a holder of Blanco BCGC74 - BCGC52, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Blanco BCGC74 - BCGC52.
However, one of the most important roles played by the user manual is to help in solving problems with Blanco BCGC74 - BCGC52. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Blanco BCGC74 - BCGC52 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
