Instruction/ maintenance manual of the product ACM-5711 ACTi
Go to page of 11
IP Box Camera ACM-5711 Ver. 080131 Quick Installation Guide.
0-1 0 Getting Started 1.1 PACKAGE CONTENTS ACM-5711 Power Adaptor (Option) Product CD Terminal Blocks for Power & DI/O Warranty Card Accessory 1.
0-2 1.2 PHYSICAL DESCRIPTION 1. Ethernet Port The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this IP device can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
0-3 time lapse recording, alarm notifications, etc., the I/O terminal connector provides the interface to : •1 transistor output - For connecting external devices such as relays and LED:s. Connected devices can be activated by Output buttons on the Live View page or by an Even t Type.
0-4 block. 2. Once the cables are connected, push th e connector block into the terminal connector (also green) on the camera. 1 2 3 FUSE 1A NP N DC TO DC DI DO 3. 3V DC POWER GND 1 2 3 4 CONVERTER EARTH GND DO DI REL A Y SW DIO DE DEVICE - + POWER INPUT CAMERA 6.
0-5 8. Iris DC Iris 9. Video DC Level Adjustment 10. CCD Functions z Auto Electronic Shutter Speed Mode AES On: 1/50 (60) sec. ~ 1/120,000 sec; AES Off: 1/50 (60) sec.
0-1 1.3 BASIC CONNECTIONS Follow the procedures below to conn ect the IP device to the respective apparatuses. 1. Connect the power adaptor to IP device 2. Connect IP device’s ethern et port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, you can re gard it as a PD and connect it directly to a PSE device like PoE switch.
1-2 1 Quick Tour This section guides you with a qui ck tour on this IP device. 2.1 Configure this IP Device 2.1.1 Make sure network environment Default IP of this IP device is 192.168.0.100. Please make sure this IP device and your PC are on the same network segm ent before running the installation.
1-3 2.1.2 Open Internal Explorer with IP address NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: This IP device default IP address is set to 192.
1-4 2.1.4 Preview the video 2.1.5 Set the new IP address.
1-5 *IP Address : The default IP address is 192.168.0.10 0. *Subnet Mask : The default subnet ma sk is 255.255.255.0 *Click button NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotat ion, since this IP device follows MII standard.
An important point after buying a device ACTi ACM-5711 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTi ACM-5711 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTi ACM-5711 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTi ACM-5711 you will learn all the available features of the product, as well as information on its operation. The information that you get ACTi ACM-5711 will certainly help you make a decision on the purchase.
If you already are a holder of ACTi ACM-5711, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTi ACM-5711.
However, one of the most important roles played by the user manual is to help in solving problems with ACTi ACM-5711. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTi ACM-5711 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
