Instruction/ maintenance manual of the product ACM-4201 ACTi
Go to page of 9
Megapixel IP Cube Camera ACM-4201 Ver. 090714 Quick Installation Guide.
0-1 0 Getting Started 1.1 P A CK AGE CONTENTS ACM-4201 Power Adaptor (Option) Product CD Camera Stand Warranty Card Accessory 1.
0-2 1.2 PHYSICAL DES CRIPTION 1. Action LED Indicator The LED will light up after IP camera has successfull y c ompleted the boot process 2. Built-in Microphone Sensitivit y : -36dB ± 3dB (0dB=1V/Pa .
0-3 3. Audio Output The IP device supports audio output with earphone jack 4. Ethernet Port The IP device connects to the Ethernet via a standard RJ 45 connector. Supporting NWAY, this IP devic e can auto detect the speed of local network segment (10Base-T/100Base-TX Ethernet).
0-4 1.3 BASIC CONNE CTIONS Follow the procedures below to connect the IP device to the respective apparatuses. 1. Connect the power adaptor to IP device 2. Connect I P device ’s ethernet port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, y ou can regard it as a PD and c onnect it directly to a PSE device like PoE switch.
1-5 1 Quick Tour This section guides you with a quick tour on this IP device. 2.1 Configure this IP Devic e 2.1.1 Make sure network environment Default IP of this IP device is 192.168.0.100. Please make sure this IP device and your PC are on the same network segment before running the installation.
1-6 2.1.2 Open Internal Expl orer with IP address NOTE: If your we b browser is earlier than IE6, then download IE6 is recommended. NOTE: This IP dev ice default IP address is se t to 192.
1-7 2.1.4 Preview the video 2.1.5 Set the new IP address.
1-8 *IP Address : T he default I P address is 19 2.168.0.100 . *Subnet M ask : The defaul t subnet m ask is 255.255.255.0 *Click button NOTE: In your Cli ent PC, please make sure the s etting of Network Connections Type is se t to Auto Negotation, sinc e this IP device follow s MII standard.
An important point after buying a device ACTi ACM-4201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTi ACM-4201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTi ACM-4201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTi ACM-4201 you will learn all the available features of the product, as well as information on its operation. The information that you get ACTi ACM-4201 will certainly help you make a decision on the purchase.
If you already are a holder of ACTi ACM-4201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTi ACM-4201.
However, one of the most important roles played by the user manual is to help in solving problems with ACTi ACM-4201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTi ACM-4201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
