Instruction/ maintenance manual of the product ACM-3011 ACTi
Go to page of 10
IR Day&Night IP Dome ACM-3011 Ver. 081015 Quick Installation Guide.
0-1 0 Getting Started 1.1 PACKAGE CONTENTS ACM-3011 Power Adaptor (Option) Product CD Accessory Warranty Card Drill Template Drill template 1.
0-2 1.2 PHYSICAL DESCRIPTION 1. Reset Button Step 1: Switch off IP device by di sconnecting the power cable Step 2: Press and continue to hold th e Reset Button. Reconnect the power cable while continui ng to hold the reset button. Step 3: Keep holding the reset butto n depressed for a while, release the reset button.
0-3 P i n 1 4. Audio Input / Output The IP device supports audio i nput and output with terminal block. PIN NAME DESCRIPTION 1 12V DC Power Input 2 GND Ground Pin.
0-1 1.3 BASIC CONNECTIONS Follow the procedures below to conn ect the IP device to the respective apparatuses. 1. Connect the power adaptor to IP device 2. Connect IP device’s ethern et port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, you can re gard it as a PD and connect it directly to a PSE device like PoE switch.
0-2 1.4 Adjust the focus / zoom.
1-3 1 Quick Tour This section guides you with a qui ck tour on this IP device. 2.1 Configure this IP Device 2.1.1 Make sure network environment Default IP of this IP device is 192.168.0.100. Please make sure this IP device and your PC are on the same network segm ent before running the installation.
1-4 2.1.2 Open Internal Explorer with IP address NOTE: If your web browser is earlier than IE6, then download IE6 is recommended. NOTE: This IP device default IP address is set to 192.
1-5 2.1.4 Preview the video 2.1.5 Set the new IP address.
1-6 *IP Address : The default IP address is 192.168.0.10 0. *Subnet Mask : The default subnet ma sk is 255.255.255.0 *Click button NOTE: In your Client PC, please make sure the setting of Network Connections Type is set to Auto Negotia tion, since this IP device follows MII standard.
An important point after buying a device ACTi ACM-3011 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTi ACM-3011 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTi ACM-3011 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTi ACM-3011 you will learn all the available features of the product, as well as information on its operation. The information that you get ACTi ACM-3011 will certainly help you make a decision on the purchase.
If you already are a holder of ACTi ACM-3011, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTi ACM-3011.
However, one of the most important roles played by the user manual is to help in solving problems with ACTi ACM-3011. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTi ACM-3011 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
