Instruction/ maintenance manual of the product ACM-1231 ACTi
Go to page of 18
MegaPixel IP Outdoor IR Bullet Camera (with DC 12V / PoE / AC 24V) ACM-1230 series Ver. 081016 Hardware User’s Manual.
0-1 0 PRECAUTIONS 1. Read these instructions All the safety and operating instructions should be read before the product is operated. 2. Heed all warnings All warnings on the product and in the instruction manual should be adhered to. The symbol indicates the following item s, please carefully read the description next to each symbol.
0-2 and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harm ful interference to radio communications.
0-3 Table of Contents 0 PRECAUTIONS________________________________________________ 0-1 Trademarks ________________________________________________________________ 0-1 Liability ______________________.
1-1 1 INTRODUCTION 1.1 Package Contents ACM-1230 series Power Adaptor (Option) (DC12V / PoE / AC24V) Product CD Terminal Block for Power Warranty Card 1.
1-2 1.2 Features and Benefits This IP device is a cutting-edge digi tal video transmission device. It can compress and transmit real tim e images with outstanding im ages quality (SXGA, 1280x1024) at reasonable bandwidth through a standard TCP/IP network.
1-3 delivers better sensitivity and responds f aster than software motion detection. z Bundle Powerful Surveillance Software To extend the capabilities of this IP d evice, a powerful surveillance program is included in the package and is very free to use.
1-4 1.3 Safety Instructions z Don’t use the po wer supply with other voltages This device is likely to be damaged or damage other equipm ents / personnel, if you use a power supply w ith different voltage than the one included with this device. All warranty of this product will be voided in the situations above.
1-5 operating Instructions in this ma nual. Adjust only those controls that are covered by the instru ction manual as an improper adjustment . Other controls m ay result in damage and will often require extensive work by a qualif ied technician to restore the video product to its normal operation.
1-6 1.4 Physical Description 1. Power Input If your power input is DC12V. Please follow the description on the connector to connect to power. If your power input is AC24V.
1-7 2. Audio Input / Output The IP device supports audio i nput and output, with terminal block. 3. Reset Button Step 1: Switch off IP device by di sconnecting the power cable Step 2: Press and continue to hold th e Reset Button. Reconnect the power cable while continui ng to hold the reset button.
1-8 1.5 Basic Connections Follow the procedures below to conn ect the IP device to the respective apparatuses. 1. Connect the power adaptor to IP device 2. Connect IP device’s ethern et port to an Ethernet (RJ45 connectors). If your IP device has PoE built-in, you can re gard it as a PD and connect it directly to a PSE device like PoE switch.
1-9 1.6 Installation Procedure 1.6.1 Loosen the screws, and remove cam era back 1.6.2 Connect cables through conduit hole.
1-10 1.6.3 I/O connecting Reference section 1.4 Physical Description for detail spec of I/O connecting. 1.6.4 Install camera back and tighten the screws.
1-11 1.6.5 Loosen the screws and remove sunshield 1.6.6 Install the camera onto bracket.
1-12 1.6.7 Rotate camera box counter-cl ockwise t o remove camera cover 1.6.8 Adjust the focus / zoom - Zoom adjust lever - Focus adjust lever.
1-13 1.6.9 Install sunshield and camera cover back.
1-14 1.7 Product Specification.
An important point after buying a device ACTi ACM-1231 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ACTi ACM-1231 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ACTi ACM-1231 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ACTi ACM-1231 you will learn all the available features of the product, as well as information on its operation. The information that you get ACTi ACM-1231 will certainly help you make a decision on the purchase.
If you already are a holder of ACTi ACM-1231, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ACTi ACM-1231.
However, one of the most important roles played by the user manual is to help in solving problems with ACTi ACM-1231. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ACTi ACM-1231 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
