






1. Push the on / off switch to turn on the speaker. The speaker will automatically enter pairing mode as indicated by a flashing Bluetooth LED. 2. Activate your device’s Bluetooth function and search for the device. 3. Once the Bluetooth speaker has been detected, select the model name “Anker A7911” to connect. (For devices with Bluetooth 3.0 and earlier, press “Yes” to begin pairing. Enter a passkey or PIN code “0000” (4 zeros) and press “Yes” or “OK” to complete pairing.) 4. Once the speaker and your device have been successfully paired, the speaker will beep once and the Bluetooth LED will come on.
When turning on the speaker, it will automatically connect to the last connected device as long as Bluetooth is still enabled. Before pairing with another device, disable the Bluetooth function on the previous device and the speaker will automatically return to pairing mode.

When the battery is low, the speaker will beep once and the red indicator will flash for about 10 minutes. 1. Plug the Micro USB cable into the speaker’s Micro USB charging port. 2. Insert the remaining end of the USB charging cable into (a) a USB AC adapter (not included) connected to a wall socket, or (b) a charging computer USB port. A steady red battery indicator will show that it is charging. 3. When fully charged, the red battery indicator will go off.


1. Power off the speaker when not in use and before storing. 2. The operational range of the speakers may be influenced by obstructions such as walls and pillars. To ensure a stable connection, we recommend avoiding such obstructions whenever possible and/or shortening the distance during use. 3. To protect the long term performance of the battery, avoid placing the speaker in temperatures exceeding 140°F/60°C such as in a hot vehicle or under direct sunlight. 4. Do not expose the speaker or its accessories to water or liquids.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Our company provides customers with a warranty of 18 MONTHS from the date of purchase.
For any inquiries or comments concerning our products, please send an email to support@ianker.com, and we will respond to you as soon as possible. If there is any quality-related issue with the product, you may request a REPLACEMENT OR REFUND by submitting a request form at www.ianker.com/support.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.