Instruction/ maintenance manual of the product iM05 AMC
Go to page of 12
iM05 iM05 USER GUIDE Studio Architectural Balanced Unbalanced Monitor Speakers & Multi-zone Speakers with and input connectors for Monitoring and architectural for fitting up to 500ft CA T5 cable wiring systems like AMC XO, XOi etc.
1 Introduction ....................................................4 What's in the Box? .... ..........................................4 i M 0 5F e a t u r e s........ ......................................4 Front and Rear Panel Features ........
CAUTION: A TTENTION: PRECAUCION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARISED) PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED TO PREVENT BLADE EXPOSURE. POUR PREVENIR LES CHOCS ELECTRIQUES NE P AS UTILISER CETTE FICHE POLARISEE A VEC UN PROLONGA TEUR.
All the safety and operating instructions should be read before the appliance is operated. The safety and operating instructions should be retained for future reference. All warnings on the appliance and in the operating instructions should be adhered to.
Thank you for choosing the iM05 bi-amplified studio monitor & Architectural multi-zone speakers. The AMC iM05 is with Balanced and Unbalanced input connectors for Monitoring and architectural for fitting up to 500ft CA T5 cable wiring systems like AMC XO, XOi etc.
1 2 5 8 6 7 9 3 4 3.Sub-Frequency Port The air vent hole in the rear panel is called a Sub-Frequency Port and is designed to allow the discharge of extreme low frequencies occurring below 60Hz.
6 1. This jack accepts XLR input connections with either balanced or unbalanced wiring. The input wiring of an XLR connector should be as follows: XLR PIN 1 Signal ground (Shield) XLR PIN 2 Signal positive (+) XLR PIN 3 Signal negative (-) 2. This jack accepts 1/4" connections with either balanced or unbalanced wiring.
7 6.5 inches 9.87 inches Power LED HF Driver (T weeter) LF Drive r (Woofer) For optimal performance of the iM05, please read the following thoroughly and carefully prior to installation.
XLR Balanced Connection TRS Balanced/Unbalanced Connection Assure that the power switch of the iM05 is turned off and that the volume control of the iM05 is turned down to a minimum. Connect the male end of an XLR balanced cable to the balanced input of the iM05 (refer to the following diagram for balanced connection).
9 Digital H.O.M.E. System AMC XO Multi-Zone Speakers CA T5 Cable up to 500ft Placing the iM05 Architectural Multi-zone speaker applications Studio Monitor Speaker Applications Placing the speakers is one of the most important procedures in order to monitor sound accurately .
10 2-way studio reference monitors & Architectural Speakers 5-inch cone with high temperature voice coil and damped rubber surround Specially developed dome with magnetic shielding 1 x XLR balance.
Part No.:21R-4212 www .amchome.com.
An important point after buying a device AMC iM05 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMC iM05 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMC iM05 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMC iM05 you will learn all the available features of the product, as well as information on its operation. The information that you get AMC iM05 will certainly help you make a decision on the purchase.
If you already are a holder of AMC iM05, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMC iM05.
However, one of the most important roles played by the user manual is to help in solving problems with AMC iM05. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMC iM05 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
