Instruction/ maintenance manual of the product ZyXEL ZyAIR 100 ZyXEL Communications
Go to page of 56
PL-100 PowerLine 85 Mbps Ethernet Adapter User ’ s Guide V ersion 1.00 9/2005.
PL-100 User’s Guide 2 Copyright Copyright Copyright © 2005 by ZyXEL Communications Corpo ration. The contents of this publication may not be reprod uced in any part or as a whole, transcribed, stor.
PL-100 User’s Guide Federal Com munications Commission ( FCC) Interf erence Statem ent 3 Federal Communications Commission (FCC) Interference S t atement This device complies with Part 15 of FCC rul es. Operation is subject to the following two conditions: • This device may not cause harmful interference.
PL-100 User’s Guide 4 Safety Warnings Safety W arnings For your safety , be sure to read and fo llow all warning notices and instructions. • Do NOT open the device or un it. Opening or removi ng covers can expose you to dangerous high vo ltage points or othe r risks.
PL-100 User’s Guide ZyXEL Limited Warranty 5 ZyXEL Limited W arranty ZyXEL warrants to the original en d user (purchaser) that this product is free from any defects in materials or workmansh ip for a period of up to tw o years from the date of purchase .
PL-100 User’s Guide 6 Customer Suppo rt Customer Support Please have the following information r eady when you contact customer support. • Product model and serial number . • W arranty Information. • Date that you received your de vice. • Brief description of the problem and the steps yo u took to solve i t .
PL-100 User’s Guide Customer Support 7 UNITED KINGDOM support@zyxel.co.uk +44 (0) 1344 303044 08707 555779 (UK only) www .zyxel.co.uk ZyXEL Communications UK Ltd.,1 1 The Courtya rd, Eastern Road, Bracknell, Berkshire, RG12 2XB, United Kingdom (UK) sales@zyxel.
PL-100 User’s Guide 8 Customer Suppo rt.
PL-100 User’s Guide Table of Contents 9 T able of Content s Copyright .................................................. ................................................................ 2 Federal Communications Commissi on (FCC) Interference St atement .
PL-100 User’s Guide 10 Table of Contents Chapter 4 Using the Configuration Utility ............................................... .............................. 29 4.1 Configuration Utility Main Screen ................. ................ ...........
PL-100 User’s Guide List of Fi gures 11 List of Figures Figure 1 Connecting the PL-100 to a Broadband Modem .... ................... ................ ............. 22 Figure 2 Connecting the PL-100 to a Computer ....... ............. ............. .
PL-100 User’s Guide 12 List of Figures.
PL-100 User’s Guide List of Tables 13 List of T ables T able 1 LED St atus of the PL-100 After Connection .......... ................... ................ ............. 24 T able 2 Utility Main Window Descriptions .......................... .........
PL-100 User’s Guide 14 List of Tables.
PL-100 User’s Guide Preface 15 Preface Congratulations on your p u rchase of the PL-100 PowerLine 85 M bps Ethernet Adapter . Note: Register your product online to receive e-mail notice s of firmware upgrades and information at www .zyxel.com for global products, or at www .
PL-100 User’s Guide 16 Preface.
PL-100 User’s Guide Chapter 1 Getting to Know Your PL-100 17 C HAPTER 1 Getting to Know Y our PL-100 This chapter introduces the main feat ures and applications of the PL-100.
PL-100 User’s Guide 18 Chapter 1 Getting to Know Yo ur PL-100 LAN Port The 10/100 Mbps auto-negotiatin g Ethernet LAN port allows the PL-100 to detect the speed of incoming transmissions and ad just appropriately without manual intervention.
PL-100 User’s Guide Chapter 1 Getting to Know Your PL-100 19 1.4.3 Share Files, Printers and Other Devices The benefit of any home network is of course to e asily connec t to high speed Internet, but also to share and exchange content. Easily share one printer with everyone in the house.
PL-100 User’s Guide 20 Chapter 1 Getting to Know Yo ur PL-100.
PL-100 User’s Guide Chapter 2 Connec ting the PL-100 21 C HAPTER 2 Connecting the PL-100 This chapter describes how to connect the PL-100 to your broadband con nection and computers.
PL-100 User’s Guide 22 Chapter 2 Connectin g the PL-100 2.2 Connecting the PL-100 2.2.1 Connecting the PL-100 to Y our Main Cable or DSL Modem In order to get the whole house n etworked, you want to first make sure all the comp uters you wish to be networked are connected proper ly to a PL-100 adapter .
PL-100 User’s Guide Chapter 2 Connec ting the PL-100 23 2.2.2 Connecting th e PL-100 to a Computer For all the computers you wish to be networked, they must each be connected properly to a PL-100 Ethernet adapter . The figure below shows how to connect the PL-100 to each computer .
PL-100 User’s Guide 24 Chapter 2 Connectin g the PL-100 2.2.3 LED St atus The LEDs of the PL-100 show the current connection status. Figure 3 PL-100 T op View With LED Lig hts Table 1 LED Status of the PL-1 00 After Con nection Please refer to the troubleshooting gu ide for additional help if needed.
PL-100 User’s Guide Chapter 3 Installing th e PL-100 Software 25 C HAPTER 3 Inst alling the PL-100 Sof tware 3.1 Inst allation of the Utility Please verify that no other HomePlug or Encr yption Management Utilities are installed before installing this product.
PL-100 User’s Guide 26 Chapter 3 Installin g the PL-100 Software 2 Enter your User Name and Organization (optional). For ex clusive control by an individual, click the “ Only for me ” radio button.
PL-100 User’s Guide Chapter 3 Installing th e PL-100 Software 27 4 The installation wizard is ready to begin the installation. Click Next to proceed or Cancel to exit the wizard. Figure 7 Install Begin Screen 5 The PL-100 Configuratio n Utility is being installed.
PL-100 User’s Guide 28 Chapter 3 Installin g the PL-100 Software 6 This is the screen to confirm the Installatio n W izard has s uccessfully installed the PL-100 Configuration Utility to your computer .
PL-100 User’s Guide Chapter 4 Using the Co nfiguration Utility 29 C HAPTER 4 Using the Configuration Utility After the hardware and software ar e installed successful ly , you can set up and adjust your network. In order to run the configurat ion utility , dou ble-click the utility icon.
PL-100 User’s Guide 30 Chapter 4 Using t he Configuration Utility Table 2 Utility Main Window Descriptions LABEL DESCRIPTION T op Panel This shows all local HomePl ug devices found connected to the computer ’s NIC (Network Interface Card). In most cases, only one device will be seen.
PL-100 User’s Guide Chapter 4 Using the Co nfiguration Utility 31 Figure 1 1 Add Device A confirmation box will appear if the password was entered correctly and if the device was found. If a device is not found, you will be notified and suggestions to resolve common problems will be presented.
PL-100 User’s Guide 32 Chapter 4 Using t he Configuration Utility 4.2 Privacy Screen The Privacy dialog screen provides a means for managi ng the local network and pro viding additional security . All HomePlug devices ar e shipped using a default logical network (network name), which is norm ally “HomePlug”.
PL-100 User’s Guide Chapter 4 Using the Co nfiguration Utility 33 4.3 Diagnostics Screen The Diagnostics screen shows system information an d a history of all devices seen.
PL-100 User’s Guide 34 Chapter 4 Using t he Configuration Utility Table 4 Diagnostics Screen Items LABEL DESCRIPTION Upper Panel This area shows technical data concerning software and hardware on the host computer used to communicate over HomePlug.
PL-100 User’s Guide Chapter 4 Using the Co nfiguration Utility 35 4.4 About Screen The About screen in the figure below shows the so ftware version and provides access to the ZyXEL website. Figure 15 About Screen Table 5 About Screen Choices LABEL DESCRIPTION http://www .
PL-100 User’s Guide 36 Chapter 4 Using t he Configuration Utility.
PL-100 User’s Guide Chapter 5 Trou bleshoot ing 37 C HAPTER 5 T roubleshooting This chapter covers potential pr oblems and possible remedies. After each problem descri ption, instructions are provided to help you diagnose and fix th e problem. 5.1 Using LEDs to Diagnose a Problem 5.
PL-100 User’s Guide 38 Chapter 5 Troublesho oting.
PL-100 User’s Guide Appendix A PL-1 00 Specificat ions 39 A PPENDIX A PL-100 S pecifications Table 9 Specifications Table 10 RJ-45 Connector Pin Assignments ITEM DESCRIPTION Product Name PL-100 PowerLine 85 Mbps Ethernet Adapter Power Input 100 - 240 V AC, 50 ~ 60 Hz, 0.
PL-100 User’s Guide 40 Appendix A PL-1 00 Specificat ions.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 41 A PPENDIX B Setting up Y our Computer ’ s IP Address All computers must have a 10M or 100M Et hernet adapter card and TCP/IP installed.
PL-100 User’s Guide 42 Appendix B Setting up Your Computer’s IP Address Windows 95/98/Me Click St a r t , Setti ngs , Control Panel and dou ble-click the Network icon to open the Network window .
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 43 If you need Client for Microsoft Ne tworks: 1 Click Add . 2 Select Client and then click Add . 3 Select Microsoft from the list of manufacturers. 4 Select Client for Microsoft Networks from the list of network clients and then click OK .
PL-100 User’s Guide 44 Appendix B Setting up Your Computer’s IP Address Figure 18 Windows 95/98/Me: TCP/IP Properties: DNS Configuration 4 Click the Gateway tab. • If you do not know your gateway’ s IP address, remove previously installed gateways.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 45 Windows 2000/NT/XP The following exa mple figures use the default W indows XP GUI theme.
PL-100 User’s Guide 46 Appendix B Setting up Your Computer’s IP Address Figure 21 Windows XP: Control Panel: Network Connections: Properties 4 Select Internet Protocol (TCP/IP) (under the Genera l tab in W in XP) and then click Properties .
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 47 • If you have a static IP address click Use the following IP Address and fill in the IP addr ess , Subnet mask , and Default gateway fields.
PL-100 User’s Guide 48 Appendix B Setting up Your Computer’s IP Address Figure 24 Windows XP : Advanced TC P/IP Properti es 7 In the Internet Protocol TCP/IP Pr operties window (the General tab in W indows XP): • Click Obtain DNS server address automatically if you do not know your DNS server IP addre ss(es).
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 49 Figure 25 Windows XP: Internet Protocol (TCP/IP) Prope rties 8 Click OK to close the Internet Protocol (TCP/IP) Properties window . 9 Click Close ( OK in W ind ows 2000/NT) to close the Local Area Connection Properties window .
PL-100 User’s Guide 50 Appendix B Setting up Your Computer’s IP Address Macintosh OS 8/9 1 Click the Apple menu, Control Panel and double-click TCP/IP to open the TCP/IP Control Panel . Figure 26 Macintosh OS 8/9: Apple Menu 2 Select Ethernet built-in from the Connect via list.
PL-100 User’s Guide Appendix B Setting up Your Computer’s IP Address 51 Figure 27 Macintosh OS 8/9: TCP/IP 3 For dynamically assigned settings, select Using DHCP Server from the Configur e: list. 4 For statically assigned settings, do the following: •F r o m t h e Configure box, select Manually .
PL-100 User’s Guide 52 Appendix B Setting up Your Computer’s IP Address • Select Built-in Ethe rnet from the Show list. • Click the TCP/IP tab.
PL-100 User’s Guide Index 53 Index Numerics 10/100 Mbps 18 11 0 V A C 4 230V AC 4 56-bit DES 17 85 Mbps 17 A Abnormal Working Conditions 5 About Screen 35 AC 4 Accessories 4 Acts of God 5 Adapter La.
PL-100 User’s Guide 54 Index Encryption 39 Enter Password 30 Equal V alue 5 Europe 4 Exposure 4 F Failure 5 FCC 3 , 39 Compliance 3 Rules, Part 15 3 FCC Rules 3 Federal Communication s Commission 3 .
PL-100 User’s Guide Index 55 Opening 4 Operating Condition 5 Operating System T ype/V er sion 34 Operating T emp 39 Organization 26 Out-dated Warranty 5 Outlet 3 P Parts 5 Password 30 Patent 2 Permission 2 Photocopying 2 Pipes 4 PL-100 Configuration Utility 29 PL-100 S pec ifications 39 PLC 17 PL T 17 Pool 4 Postage Prepaid.
PL-100 User’s Guide 56 Index S pain, C onta ct Information 6 Supply V oltage 4 Support E-mail 6 Supporting Disk 15 Sweden, Contact Information 6 Swimming Pool 4 Syntax Conventions 15 T T ampering 5 .
An important point after buying a device ZyXEL Communications ZyXEL ZyAIR 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications ZyXEL ZyAIR 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications ZyXEL ZyAIR 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications ZyXEL ZyAIR 100 you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications ZyXEL ZyAIR 100 will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications ZyXEL ZyAIR 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications ZyXEL ZyAIR 100.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications ZyXEL ZyAIR 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications ZyXEL ZyAIR 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
