Instruction/ maintenance manual of the product 660H Series ZyXEL Communications
Go to page of 29
Pr estige 660H Series ADSL 2/2+ Gateway Compact Guide Version 3.40 (QT) April 2004.
Prestige 660H Series Compact Guide 2 T able of Content s 1 Introducing th e Pres tige.............................................................................................. 3 2 Hardware ..........................................................
Prestige 660H Series Compact Guide 3 1 Introducing the Prestige The Prestige 660H ADSL 2/2+ Gateway is the id eal all-in-one device for small networks connecting to the Internet via A DSL. Key feat ures of th e Prestige include NAT, conten t filter and firewall.
Prestige 660H Series Compact Guide 4 2 Hardware 2.1 Rear Panel Connections Figure 1 Prestige Rear Panel Co nnections Table 1 Prestige Rear Panel Desc ription LA BEL DESCRIPTION 1. DSL Connect to a telephone jack using the included phone wire. 2. LAN 1.
Prestige 660H Series Compact Guide 5 Table 1 Prestige Rear Panel Desc ription LA BEL DESCRIPTION RESET You only need to use this button if you’ve forgotten the Prestige’s password. It returns the Prestige to the factory defaults (password is 1234, LAN IP address 192.
Prestige 660H Series Compact Guide 6 Table 2 Front Panel LED Description LED COLOR STATUS DESCRIPTION Off The LAN is not connected. Fast Blinking The Prestige is sending/receiving non-PPP data. Slow Blinking The Prestige is initializing the DSL line. Green On The sy stem is ready, but is not sending/receiving non-PPP data.
Prestige 660H Series Compact Guide 7 2. The Netw ork wind ow Configuration tab displays a list of installed components. You need a network adapter , the TCP/IP protocol and Client for Microsoft Networks. 3. In the Network wi nd o w Configuration tab, select your network adapter's TCP/IP entry and click Properties .
Prestige 660H Series Compact Guide 8 5. Click the DNS Configuration tab. -If you do not know your DNS information, select Disable DNS . -If you know your DNS information, select Enable DNS and type the information in the fields below (you may not need to fill them all in).
Prestige 660H Series Compact Guide 9 2. In the Ru n window, type "winipcfg" and then click OK to open the IP Configuration window. 3. Select your network adapter. You should see your computer's IP address, subnet mask and default gateway.
Prestige 660H Series Compact Guide 10 6. Click Advanced . Remove any pre viously installed gateways in the IP Settin gs tab and click OK to go back to the Internet Protocol TCP/IP Properties screen. 7. Click OK to close the Internet Pr otocol (TCP/IP) Properties windo w.
Prestige 660H Series Compact Guide 11 Your computer can now communica te with the Prestige using the LAN port. 4 Configuring Y our Prestige This Compact Guide shows you how to use the web configurator only . See your User’s Guide for background information on all Prestige features and SMT (System Management T erminal) configuration.
Prestige 660H Series Compact Guide 12 Figure 4 Web Configura tor: Password Screen Step 3. You should now see the web configurator Site Map screen. Click Wizard Setup to beg in a series of screens to configure your Prestige for the first time. Click a link under Advanced Setup to configure advanced Prestige features.
Prestige 660H Series Compact Guide 13 Figure 5 Web Config urator: Site Map Screen The Prestige automatically times out after five minutes of inactivity . Sim ply log back into the Prestige if this happens to you. 4.2 Common Screen Command Buttons The following table shows common command but tons found on many web configurator screens.
Prestige 660H Series Compact Guide 14 Figure 6 Wizard Screen 1 From the Mode drop-down list box, select Routing (default) if your ISP allows multiple computers to share an Internet account. Otherwise select Bridge . Select the encapsulation type your ISP uses from the Encapsulation drop-dow n list box.
Prestige 660H Series Compact Guide 15 Figure 7 Internet Connection with PPPoE If your ISP provides the name of your PPPoE service provider, enter it in the Service Name field.
Prestige 660H Series Compact Guide 16 Figure 9 Internet Connec tion with ENET ENCAP In the ENET ENCAP Gateway field, enter the gateway IP address given by your ISP. Refer to Figure 7 for other field descriptions . Figure 10 Internet Connection with PPPoA Refer to Figure 7 for field descriptions.
Prestige 660H Series Compact Guide 17 Step 3. Verify the settin gs in the screen shown next. To change the LAN information on the Pr estige, click Change LAN Configurations . Otherwise click Save Settings to save the configu ration and skip t o step 5.
Prestige 660H Series Compact Guide 18 Figure 12 Wizard: LA N Configuration Enter the IP address of your Prestige in dotted decimal notation in the LAN I P Address field. For example, 192.168.1.1 (factory default). If you change the Prestige’ s LAN IP address, you must use the new IP address if you want to access the web configurator again.
Prestige 660H Series Compact Guide 19 Figure 13 Wizard Screen 4 4.4 T est Y our Internet Connection Launch your web browser and navigate to www.zyxel.com . Internet access is ju st the beginning. Refer to the User’s Guide for mo re detailed inform ation on the com plete range of Prestige features.
Prestige 660H Series Compact Guide 20 1. One-to-One : One-to-one mode maps one local IP address to one global IP address. Note that port numbers do not chang e for One-to-one NA T mapping type. 2. Many-to-One : Many-to-One mode maps multiple local IP addresses to one global IP address.
Prestige 660H Series Compact Guide 21 Figure 15 SUA /NAT Server The following table d escribes the labels in th is screen. Table 3 SUA/NA T Server LABEL DESCRIPTION Start Port No. Type a port number in this field. To forward only on e port, type the port number again in the End Port field.
Prestige 660H Series Compact Guide 22 5.3 Firewall Overview The Prestige firewall is a stateful inspection fir ewall and is designed to protect against Denial of Service atta cks when activated. The Prestige’s purpose i s to allow a priv ate Local Area Network (LAN) to b e securely conn ected to the Int ernet.
Prestige 660H Series Compact Guide 23 5.4 Enabling the Firewall From the main s creen, click Adv anced Setup , Fi rewall and then Config to open the screen as shown. Enab le (or activ ate) the firewal l by selecting th e Enable Firewall check box as seen in the followin g screen.
Prestige 660H Series Compact Guide 24 Figure 18 Rule Summary The following table d escribes the labels in th is screen. Table 4 Rule Summary LA BEL DESCRIPTION The default action for packets not matching following rules Should packets that do not match the following rules be blocked or forwarded? Make your choice from the drop do wn list box.
Prestige 660H Series Compact Guide 25 Table 4 Rule Summary LA BEL DESCRIPTION The following read-only fields summarize the rules you have created that appl y to traffic traveling in the selected packet direction. The firewall rules that you configure (summarized below) take priority over the general firewall action settings above.
Prestige 660H Series Compact Guide 26 Available Service buttons . For a comprehensive list of port numbers and services, visit the IANA (Internet A ssigned Number Authority) web site. Step 3. Configure the Source Address and Destination Address for the rule.
Prestige 660H Series Compact Guide 27 Table 5 Creating/Editing A Firew all Rule LA BEL DESCRIPTION Source Address Click SrcAdd to add a new address, SrcEdit to edit an existing one or SrcDelete to delete one. Please see the next s ection for more information on adding and editing source addresses.
Prestige 660H Series Compact Guide 28 Figure 20 A dding /Editing Source and Dest ination Addresses The following table d escribes the labels in th is screen.
Prestige 660H Series Compact Guide 29 6 T roubleshooting Table 7 Trouble shooting PROBLEM CORRECTIVE ACTION None of the LEDs turn on when you turn on the Prestige. Make sure that you have the correct power adaptor connected to the Prestige and plugged in to an appropriate power source.
An important point after buying a device ZyXEL Communications 660H Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ZyXEL Communications 660H Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ZyXEL Communications 660H Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ZyXEL Communications 660H Series you will learn all the available features of the product, as well as information on its operation. The information that you get ZyXEL Communications 660H Series will certainly help you make a decision on the purchase.
If you already are a holder of ZyXEL Communications 660H Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ZyXEL Communications 660H Series.
However, one of the most important roles played by the user manual is to help in solving problems with ZyXEL Communications 660H Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ZyXEL Communications 660H Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
