Instruction/ maintenance manual of the product EDG2300 Zenoah
Go to page of 24
The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. WARNING OWNER / OPERA T OR MANUAL PORT ABLE GAS DRILL 848-AE0-93A2 (706) EDG2300 Thank you for purchasing a RedMax product.
Read this manual carefully to understand all safety precautions, controls, proper operation and maintenance of your RedMax portable gas drill. Failure to do so could result in serious injury .
CONTENTS SAFETY PRECAUTIONS .................................................................................. 4 IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR PORTABLE GAS DRILL WORK GEAR AND C.
■ IN ORDER TO ENSURE PROPER AND SAFE OPERATION OF YOUR PORTABLE GAS DRILL • Read this Owner/Operator Manual carefully. Be sure you understand how to operate this unit properly before you use it. Failure to do so could result in serious injury. • Be sure to keep this manual handy so that you may refer to it later whenever any questions arise.
Safety Precautions ■ WORK GEAR AND CLOTHING • When using your portable gas drill, always be sure to wear strong, durable, work clothing; shirts should be long-sleeved shirts and pants should be full-length pants reaching down to the ankles. • Always be sure to wear and helmet and face protector when using your portable gas drill.
6 Safety Precautions ■ THINGS TO CHECK BEFORE USING YOUR PORTABLE GAS DRILL • Before beginning work, look around carefully to get a feel for the shape of the land, and whether or not there are any obstacles which might get in the way while working, and remove any obstacles which can be cleared away before beginning work.
■ THINGS TO BE CAREFUL ABOUT WHEN USING YOUR PORTABLE GAS DRILL •W hen using your portable gas drill, grip the handles of the portable gas drill firmly with both hands, place your feet slightly ap.
8 Safety Precautions ■ NOTES ON CARE AND MAINTENANCE OF YOUR PORTABLE GAS DRILL • In order to maintain your portable gas drill in proper working order, perform the maintenance and checking operations described in this manual at regular intervals.
Parts Location & Specifications Setup 1. Attach the grip and the drill chuck to the power unit securely by hand. 2. Insert the drill into the chuck, and tighten firmly. MODEL EDG2300 Overall Dimensions (LxWxH) in (mm) 14.7x8.42x9.34 (366x210x233) Dry Weight lbs (kg) 10.
Fuel 10 ■ RECOMMENDED MIXING RATIO GASOLINE 50:OIL 1 (when using RedMax/ZENOAH genuine oil) • Exhaust emission are controlled by the fundamental engine parameters and components(eq., carburation, ignition timing and port timing) without addition of any major hardware or the introduction of an inert material during combustion.
11 Fuel 4. Pour In the rest of gasoline and agitate again for at least one minute. As some oils may be difficult to agitate depending on oil ingredients, sufficient agitation is necessary for the engine to last long.
12 Operation • The throttle lock makes starting easier. Always use it when starting the engine. 5. While firmly holding the auger as illustrated, vigorously pull the starter rope. 6. When engine has ignited first, open the choke (move the choke lever backward), pull the starter rope again and the engine will start.
Operation ■ STOPPING ENGINE • Release the throttle lever and press on the red button until the engine comes to a complete stop. ■ BORING OPERATION • Keep the engine running at full throttle during operation. • Keep the drill going straight. Tilted boring can cause the drill to bend.
14 • Before cleaning, inspecting or repairing your unit, make sure that engine has stopped and is cool. Disconnect the spark plug terminal to avoid accidental engine starts. ■ DAILY INSPECTION •R emove grass or dust, from the entire body.
15 Maintenance Speak Arrester • Check and clean the spark plug. Adjust the electrode gap to .024~.028in (0.6~0.7mm) if necessary. Replacement plug: NGK BPMR7A ■ INSPECTION EVERY 100 HOURS • The muffler is equipped with a spark arrester to prevent red hot carbon from flying out of the exhaust outlet.
16 Storage ■ BEFORE LONG-TERM STORAGE • Drain fuel tank and run engine out until all fuel in the carburetor is used up. • Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.
Parts List NOTE : 1. Use RedMax/ZENOAH genuine parts as specified in the parts list for repair and/or replacement. 2. RedMax/ZENOAH does not warrant the machines, which have been damaged by the use of any parts other than those specified by the company.
Parts List : EDG2300 18 Fig.1 DRIVE UNIT and TOOLS (S/N 901 1 12 and up).
EDG2300 Fig.1 DRIVE UNIT and T OOLS (S/N 901 1 12 and up) Key# Part Number Description Q'ty 1 3871-21100 Right handle comp. 1 2 3871-21120 • Grip 1 3 3871-21320 Stay 1 4 3545-14240 Bolt 1 5 016.
Parts List : EDG2300 20 Fig.2 ENGINE UNIT (S/N 901 1 12 and up).
EDG2300 Fig.2 ENGINE UNIT (S/N 901 1 12 and up) Key# Part Number Description Q'ty 1 5602-12110 CYLINDER 1 2 5500-12213 GASKET, base 1 3 1850-12130 BOLT M5x12 2 4 5500-13163 INSULATOR 1 5 5500-131.
EMISSION-RELATED PARTS, FOR TWO (2) YEARS FROM THE DATE OF ORIGINAL DELIVERY OF THE UNIT, RedMax / ZENOAH AMERICA, INC., THROUGH ANY RedMax DEALER, WILL REPAIR OR REPLACE, FREE OF CHARGE, FOR THE ORIGINAL AND EACH SUBSEQUENT PURCHASER, ANY PART OR PARTS FOUND TO BE DEFECTIVE IN MATERIAL AND/OR WORKMANSHIP.
Pièces en rapport avec les émissions de gaz d'échappement : RedMax / ZENOAH AMERICA, INC., par l'intermédiaire de n'importe quel revendeur RedMax, réparera gratuitement ou remplace.
ZENOAH AMERICA, INC. 1100 Laval Blvd. Suite 110 Lawrenceville, Georgia 30043 ©P rinted in Japan.
An important point after buying a device Zenoah EDG2300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zenoah EDG2300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zenoah EDG2300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zenoah EDG2300 you will learn all the available features of the product, as well as information on its operation. The information that you get Zenoah EDG2300 will certainly help you make a decision on the purchase.
If you already are a holder of Zenoah EDG2300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zenoah EDG2300.
However, one of the most important roles played by the user manual is to help in solving problems with Zenoah EDG2300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zenoah EDG2300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
