Instruction/ maintenance manual of the product 100 Weber
Go to page of 12
Y ou m us t re ad t hi s o WN er ’s G ui de be f o re o pe ra ti NG Y o ur G a s G r i l l 41009 02/15/06 Gas Grill Owner’ s Guide m DANGER If you smell gas: 1.
m Even though your gas supply cartridge/cylinder may appear to be empty , it might still contain gas. The cartridge/cylinder should be transported and stored accordingly . m Under no circumstances should you attempt to disconnect the gas regulator or any gas fitting while your grill is in operation.
Cooking T o light the grill: Refer to the lighting instructions in this owners manual and printed on the fold out tables (Q120, 200, 220) of your grill. T o preheat the grill : Light the Weber gas grill according to the lighting instructions in this owners manual.
C ASSEMBL Y 1 - 2 - 2 - 2 - 2 - 1 - 1 - 1 - a d 2 1 b ©2006 The following trademarks are registered in the name of Weber-Stephen Products Co., an Illinois corporation, located at 200 East Daniels Road, Palatine, Illinois 60067 U.
GAS INSTRUCTIONS - Q 100, 120 COUNTRY GAS TYPE & PRESSURE Demark, Sweden, Norway , Finland, The Netherlands, United Kingdom, France, Spain, Portugal, Belgium, Ireland, Greece, Luxembourg, Italy I 3B/P - 29mbars Germany , Austria I 3B/P - 50mbars CONSUMPTION DA T A Main Burner .
GAS INSTRUCTIONS - Q 100, 120 (CONTINUED) Check for gas leaks: 1) Regulator to butane/propane cartridge connection. m W ARNING: If there is a leak at connection (1), remove butane/ propane cartridge. Do not operate grill. Use a different butane/ propane cartridge and recheck for leaks with soap-and-water solution.
GAS INSTRUCTIONS - Q 200, 220 (CONTINUED) 2) 1) Regulator-to-butane/-propane cylinder connection. 1) Regulator to butane/propane cylinder connection. m W ARNING: If there is a leak at connection (1), remove butane/ propane cylinder . Do not operate grill.
LIGHTING INSTRUCTIONS 1). 2). 6). 2). 5). OFF 3). ST ART/ HI 4). 4). Manual Lighting 1) Open the lid. 2) Unfold the work surfaces (Q120, 200, 220) . 3) Make sure the burner control knob is turned OFF . T urn the cylinder on by turning the cylinder valve anticlockwise (Q200, 220) .
Make sure the igniter port hole (A) lines up with the arrow tab (B) on the igniter box. • Check that the ignition button pushes the igniter (button) down, and returns to the up position. If the ignition system still fails to light, contact the Customer Service Representative in your area using the contact information on our web site.
10 2) 1) 2) 1) MAINTENANCE (CONTINUED) Check for gas leaks: After a period of non-use, we recommend that you perform the following maintenance procedures for your safety . • Inspect the burner for correct flame pattern. Clean if necessary , following the procedures outlined in the “Annual Maintenance” section of this manual.
Y ou must preheat the grill before you cook on it. First, open the lid and follow lighting instructions. Close the lid and let the grill heat for about 10 minutes. Then you will be ready to grill. A light coating of oil will help brown your food evenly and keep it from sticking to the cooking grate.
1 GRILLING GUIDE (CONTINUED) Weber-Stephen Products Co. (Weber) hereby warrants to the ORIGINAL PURCHASER of this Weber ® gas grill that it will be free of defects in material and workmanship from.
An important point after buying a device Weber 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Weber 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Weber 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Weber 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Weber 100 will certainly help you make a decision on the purchase.
If you already are a holder of Weber 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Weber 100.
However, one of the most important roles played by the user manual is to help in solving problems with Weber 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Weber 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center