Instruction/ maintenance manual of the product Z-3190BT Zebex
Go to page of 98
Adv anced Handheld High-Speed Laser Scanner 1.
W irele ss Handheld Gun T ype Scanner i U SER ’ S M ANU AL R evision H is tory Change s to the original manual ar e list ed below: V er sion Date Description of V er sion 1.0 August. 24, 2011 Initial rele ase 1.1 Mar ch. 26, 2012 Adde d wireless comm unication tips 1.
W irele ss Handheld Gun T ype Scanner ii U SER ’ S M ANU AL Import an t Notice No warranty of any kind is ma de in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose.
U SER ’ S M ANU AL Ra dio Notice This equipment gene r at es use s and can r adia te r adio fr equency energy . If not ins tall ed and used in accor dance with the instructions in this manual, it ma y cause int erf erence to r adio communica tions.
W irele ss Handheld Gun T ype Scanner iv U SER ’ S M ANU AL Laser Ligh t V iewing : The scan window is the only apertur e thr ough which laser light ma y be observe d fr om this pro duct. A f ailure of t he scanner engine, while the laser dio de continue s to emit a laser beam, ma y cause emission lev els to ex ceed those f or safe oper ation.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner v Wireless Communication z Wireless technology operates 100M / 75M with comm unication cradle. Maximum communication range may vary depending on obstacles (person, metal, wall, etc.) or elect romagnetic environment.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner vi X Bad host placement O Good host placemen t At l ea s t 1 m 2. Move the access point (host/cradle) off the floor and away from walls and metal objects (such as metal file cabinets). Metal objects, walls, and floors will interfere with your wireless signals.
W irele ss Handheld Gun T ype Scanner vii U SER ’ S M ANU AL Table of Contents Importan t Notice............................................................................................................... ... ii Gener al Hand ling Precautions....
.
W irele ss Handheld Gun T ype Scanner 1 U SER ’ S M ANU AL Introduction This scanner is a gun type rugge d wirele ss CCD/Laser bar code scanner with a s tate of the art scan en gine. F eaturing a superb s can ning speed and able t o withs tand 1.5 meter dr op, it is ideal for manuf acturing and logistic sector s.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 2 Product Overview Scanner LED Indicat or Exit W indow Bu zz er Metal Char ging Cont acts Tr igger Str ap Hole Cradle Function Tr i g g e r /.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 3 Scanner and Accessories The scanner pack age contai ns: Wireless scanner with battery / Scanner cradle (optional) (wi th cradle) (without c.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 4 Battery Installation Inst alling B atteri es The rechar geable bat terie s are p ack ed individually f or shipping saf ety .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 5 Inst alling Cable Clip Cable clip is use d to hold the mini USB cable in USB O nline Mode. W ith the cable clip, y ou can easily tr ansf orm your wirele ss scanner in to a wire d one. A tt aching Cable Clip 1.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 6 Remo ving Cable Clip 1. De tach the cable fr om the clip and detach the bo tt om part of the cable clip fr om the scanner ha nd le. 2. U nhook the le ft part o f the cable clip fr om the str ap hole then turn it clockwise.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 7 Connecting the Cr ad le The cr adle host f eatur es wir eless t echnology and is designe d to s upport r adio communicatio n to the s canner . It can be used f or both ba tt ery char ging and r adio communication.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 8 Char ging the Bat tery The scanner of fer s two diff eren t wa ys t o char ge the b atte ry: USB Cable o r Cr adle. T o charge the ba tt ery using the cra dle: 1. Connect the cr adle. Please see Connecting the Cr a d le section f or more de tails.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 9 Appro x. char ging time: 5~6 hour s z The scanner will power on aut omatically when char ging. z Batteries shipped may not be full charged and should be ful ly charged for m aximum charge capacit y.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 10 How to Scan There ar e two wa ys to scan w ith this device. z Hand held sc anning z Pre sent ation s canning Hand held sc anning 1. P ower on the scanner . 2. Pr ess the trigger and aim at the bar code as illustr ate d.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 11 Radio Communication Host Type This scanner support thr ee r adio communica tion type s: z Cr adle Host mode z SPP mast er/sla ve mode z HI.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 12 Paging the Scanner 1. Ens ure the cradle is proper the ho nd LED indicator is on the cradle. You should hear the scanner make 3 ly connected to st a showing steady blue. 2. Press the function trigger beep sounds and blue L ED flash 3 times if it is in range.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 13 Visible Indicat ors Scanner cators on top of the scanner. These indi cate the ner. There are 2 groups of L ED indi operational status of the scan LED Sta tus Indica tion Gr oup_ 2 Gr oup_1 Blue Flashing W aiting for r a io connection (flash time 0.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 14 Cradle Cr adle LED LED Sta tus Indica tion Re d ste a dy and blue continuous fla shing Cr adle is ra dio disconnect ed a nd pow er from DC adaptor is los t. St ea dy re d and blue Cr adle is ra dio connect ed.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 15 A CK/NAK Pr ot ocol or Fr ame P acking When sc anner is in SPP Ma st er/Slav e mode, and add in t he data pr ot ocol or pack ing could confirm the da ta r eliability .
W irele ss Handheld Gun T ype Scanner 16 U SER ’ S M ANU AL Scanner to Remo te Applica tion Dat a F ormat o f P acke t T o send a dat a (ba rc ode) to t he remo te applica tion, the B T scanner has .
W irele ss Handheld Gun T ype Scanner 17 U SER ’ S M ANU AL Bar code T ype T able Code Va l u e Code39 0x11 Codabar 0x01 Code128 0x03 Int erlea ve d 2 / 5 0x02 Code93 0x06 UPC-E 0x14 UPC-A 0x24 EAN-.
W irele ss Handheld Gun T ype Scanner 18 U SER ’ S M ANU AL Pin-out Configur a tion Scanner mini USB Pin-O ut Configur ation PIN 1. +5V PIN 2. USB_D- PIN 3. USB_D+ PIN 4. NC PIN 5. GND Cr adle Phone Jack Pin-O ut Configur ation RJ 1. RT S_EIA RJ 6. RX_ EIA RJ 2.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 19 Cable Pin-out 1. K eyboar d W edg e Cable (for PS/ 2) PIN-O U T CON FIGURA TION MINI DIN (M) MINI DIN(F) DIN FUNCTION DIN FUNCTION 1. PC Dat a 1. KB Da ta 2. N. C. 2. N. C. 3. GND 3. GND 4.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 20 Pr ogr amming Guide Program Procedure Using Barcode Manual 1. P ower up the sc anner . 2. Sc an the Start of Configur atio n barcode. 3. Sc an the bar code f or the desir ed f eatur e. Multiple f eatur es can be enable d/disabled bef ore scanning the End of Con figur ation bar code.
W irele ss Handheld Gun T ype Scanner 21 U SER ’ S M ANU AL Def ault P ar amet ers The fa ctory def ault setting table giv es the def ault settings of all the pr ogr ammable par ameter s. The def ault set tings will be res to re d whenev er the "Re set" pr ogramming label is scanne d and the s canner is in pr ogramming mode.
W irele ss Handheld Gun T ype Scanner 22 U SER ’ S M ANU AL EAN/U PC En able CODE 39 Enab le Code 32 Disable CODABAR Enab le ITF 2 OF 5 Enable MSI Disable Chinese pos t code Disable Code 93 Enable C.
W irele ss Handheld Gun T ype Scanner 23 U SER ’ S M ANU AL MSI identifier co de P Code 11 identi fier code O Standar d 2 of 5 identifier code S Industrial 2 of 5 identifier code D GS1 Da taBar id e.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 24 Connecting t o a Host The scanner pr ovides sever al data tr ansmit methods t o communica te with the host. U ser may select the method acc ording t o their pr ef erence s. Re ad this section t o learn the setups f or connecting to diff erent hos ts.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 25 Start O f Configur ation Cradle Host Mode The scanner c ommunic ates with the host thr ough the cr adle. T ypically , scanner and cr adle in the same delivery bo x are p aire d and corr esponded t o hos t inte rface in f actory .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 26 Start O f Configur ation Wireless Mode The scanner connects t o the hos t via wirele ss connection. Y ou ma y select SPP Mas ter or SPP Sla ve f or PC connection or select HID mode a nd Smart phone mode f or smart phone connection.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 27 Start O f Configur ation SPP Mast er Mode In this mode, the scanner connects t o the hos t /PC via wirele ss connection and perf orms lik e there’ s a serial connection. In master m ode, the scanner initiates the connection to the remote device ˁ 1.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 28 Start O f Configur ation B T HID mode In BT HID mode, the scanner conne cts to the host /PC via wirele ss connection and perf orms lik e there’ s a k eyboar d connection. The scanner initiates the conne ction to the remote device ˁ 1.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 29 Start O f Configur ation Set ting Pin Code 1. T o change the pin code, use the “Set pin code” setting. Def ault is “12345678” . 2. U se the ASCII t able in Progr amming Guide to input the new code (must be at leas t 4 di gits and no t more than 8 numeric digits).
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 30 Start O f Configur ation Setting Name 1. T o change the name display ed when the sc anner is discover ed, scan the “Friend ly device name set” label. Default name is “ZBB T ” . 2. U se the ASCII t able in Progr amming Guide to input the na me (Max.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 31 Start O f Configur ation Data Transnit Method The dat a tr ans f er method include s three t ypes: Normal (de fa ult), Out -of -Range Mode, and Bat ch Mode. U ser s may modify this setting accor ding to their pr ef er ences.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 32 Start O f Configur ation Bat ch Mode Whether withi n the connection r ange or not, in ba tch mo de, the scanner s tor es all scanne d dat a tha t will be trans ferr ed t o th e host comput er aft er scanning “Se nd Bat ch Dat a” label.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 33 Start O f Configur ation Batc h T ran sfer U se the settings in this sectio n to setup bat ch tr ansf er . Send Ba tch Dat a By Scanning Label Scanning this label aut omati cally e xits you fr om the Pr ogramming Mode.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 34 S ys tem Function Se t tings Def ault values are highligh te d in gre y backgr ound. Start O f Configur ation Barcode Value Description Re.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 35 Start O f Configur ation Barcode Value Description Displa y firmwar e version Abort (e xit progr amming mode without an y updat es) Scan Mo de T rig ger mode The scanner become s inactive as soon as the data is tr ansmitt ed.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 36 Start O f Configur ation Radio Communication Setting Cradle Host mode Cr adle Host mo de enable Enable cr adle mode with this setup. U nlock pairing mode In this mode, the scanner can pair with another cr ad le when disconnect ed.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 37 Start O f Configur ation USB O nline mode USB online scan disable USB online scan enable USB online sca n, Ignore r adio communica tion BT.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 38 Start O f Configur ation Def ault Device name Friend ly device name se t Delete pin code Confirm Set ting (f or addr ess, device name, and.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 39 Start O f Configur ation Dat a T ransmit Mode Dat a tr ansmit normal Out of r ange buff er enable Bat ch mode Send Bat c h Da ta B y Scann.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 40 Start O f Configur ation Radio pr otocol comm unica tion par ameter Radio pro toc ol timeout= 3 sec Radio pro toc ol timeout= 5 sec Radio .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 41 Start O f Configur ation P ower of f timeout par ameter P ower off timeout=5 min P ower of f timeout=10 min P ower of f timeout=20 min P o.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 42 Start O f Configur ation Power Always On P ower off by s canning this label Link beeper enable Link beeper disable P ower -up beeper enabl.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 43 Start O f Configur ation 400 msec 500 msec 600 msec 700 mse c 800 msec 1000 msec Infinite End O f Configura tion.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 44 Start O f Configur ation Operation Function Setting Good Read Beeper Tone Selection Medi um beeper tone High beeper t one Low beeper to ne.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 45 Start O f Configur ation Beeper duration Selection Long Medi um Short Ultr a Short Ultr a Long End O f Configura tion.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 46 Start O f Configur ation V i br ation P arame ter (Optional function, a vailable only for cust omer s of special r eques t ) Good r ead vibra tor enable.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 47 Start O f Configur ation Inter Character Delay 0 ms 2 ms 5 ms 10 ms 20 ms 50 ms Inter Message Delay 0 ms 100 ms 500 ms 1000 ms End O f Con.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 48 Start O f Configur ation Inte rfac e S ett ing s 1. RS-232C In terf ace Setti ng Baud Rate 1152 00 192 00 9600 4800 2400 1200 Parity Bit E.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 49 Start O f Configur ation Handshaking Protocol None handshaking ACK/NAK Xon /Xo ff RT S/CT S Enable BEEPER ON< BEL> CHARA CTER Ignore.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 50 Start O f Configur ation Message Terminator RS-232 me ssage t erminat or—none RS-232 me ssage t erminat or—CR/LF RS-232 me ssage t erm.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 51 Start O f Configur ation 2. Ke yboard W e dge Set ting Keyboard We dge Setting IBM PC/ A T /PS/ 2 Keybo ard emula tion Int ernational K ey.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 52 Start O f Configur ation Message Terminator Ke yboard t erminat or ---none Ke yboard t erminat or ---Ent er Ke yboard t erminat or ---H-T .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 53 Start O f Configur ation 3. USB Interf ace Setting USB int erf ace Int ernational K eyboar d mode ( AL T method) Ke yboard languag e suppo.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 54 Start O f Configur ation 4. W and Emulation Se tting W and emulation is no t supporte d as s tandar d, if neede d, please c ontact your dis tributor .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 55 Start O f Configur ation W and Emulation (Con t ’ d) W and emulation spee d-----Low y This option allows the transmission of w and emula.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 56 Start O f Configur ation 5. Smart Phone Softwar e K eyp ad Con trol Se tting Smart Phone Softw are K eyp a d Control Multi-media k eyboar .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 57 Start O f Configur ation The Symbologie s 1. Codabar P ar amet er Set ting Barcode Value Barcode Label Description RC02 Codabar enable RD0.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 58 Start O f Configur ation Barcode Value Barcode Label Description CB13 No check character CB14 V alidat e modulo 16,but don’t tr ansmit C.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 59 Start O f Configur ation 2. Cod e 3 9 Paramete r Sett ing Barcode Value Barcode Label Description RC01 Code 39 enable RD01 Code 39 disable.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 60 Start O f Configur ation Barcode Value Barcode Label Description 3905 Code 39 check digit calculat e and transmit 3906 Code 39 check digit.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 61 Start O f Configur ation 3. Cod e 9 3 Paramete r Sett ing Barcode Value Barcode Label Description RC08 Code 93 enable RD08 Code 93 disable.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 62 Start O f Configur ation 4. Code 128 P arame ter Set ting Barcode Value Barcode Label Description RC06 Code 128 enable RD06 Code 128 disab.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 63 Start O f Configur ation 5. Chine se P ost Co de P arame ter Setti ng Barcode Value Barcode Label Description RC05 Chinese pos t code enab.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 64 Start O f Configur ation 6. MSI/Pless y Par ameter Setting Barcode Value Barcode Label Description RC14 MSI enable RD14 MSI disable DC70 M.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 65 Start O f Configur ation 7. Code 11 Int erf ace Setting Barcode Value Barcode Label Description RC07 Code 11 enable RD07 Code 11 disable 1.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 66 Start O f Configur ation 8. ITF 2 of 5 Par ameter Setting Barcode Value Barcode Label Description RC04 ITF 2 of 5 enable RD04 ITF 2 of 5 d.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 67 Start O f Configur ation Barcode Value Barcode Label Description IT01 ITF 2 of 5 code ma ximum length set ting IT02 ITF 2 of 5 c ode minim.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 68 Start O f Configur ation 9. Standar d 2 of 5 Par ameter Set ting Barcode Value Barcode Label Description RC22 Standard 2 of 5 code enable .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 69 Start O f Configur ation 10. Industrial 2 of 5 P aramet er Setting Barcode Value Barcode Label Description RC21 Industrial 2 of 5 code e n.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 70 Start O f Configur ation 11. UPC/EAN/ JAN P ara meter Set ting Barcode Value Barcode Label Description RC11 EAN con vert t o ISSN/ISBN ena.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 71 Start O f Configur ation Barcode Value Barcode Label Description UE10 Add on 5 only UE11 Add on 2 only UE12 Add on 2 or 5 UE13 For c e UPC.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 72 Start O f Configur ation Barcode Value Barcode Label Description UE23 T ransmit E AN-8 check digit enable UE24 T ransmit E AN-8 check digi.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 73 Start O f Configur ation Barcode Value Barcode Label Description DC12 UPC-A data redundant check=2 DC13 UPC-A data redundant check=3 DC14 .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 74 Start O f Configur ation UE35 EAN/UPC +a dd-on manda tory f or 97 8 / 9 77 bookland (Supplement requi rement, not sent for other) UE38 EAN.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 75 Start O f Configur ation 12. T elepen Par ameter Set ting Barcode Value Barcode Label Description RC25 Telepen enable RD25 Telepen disable.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 76 Start O f Configur ation 13. Matrix 2 of 5 P ara meter Set ting Barcode Value Barcode Label Description RC12 Matrix 2 of 5 enable RD12 Mat.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 77 Start O f Configur ation 14. GS1 Dat aBar P ar ameter Set ting There ar e 7 kinds o f barcode s in the GS1 Da t aBar f amily and they are ca tegoriz ed int o thr ee gr oups. Bar code type s in the same gr oup use the same barcode s f or setting.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 78 Start O f Configur ation GS1 Dat aBar Limit ed (F ormally RSS Limit ed) Barcode Value Barcode Label Description RC16 GS1 DataBar Li mited .
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 79 Start O f Configur ation GS1 Dat aBar Expa nded (F ormally R SS Expande d) Barcode Value Barcode Label Description RC17 GS1 DataBar Expand.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 80 Start O f Configur ation Data Editing 1. Identi fier Code Barcode Value Barcode Label Description IS00 Disable identifier co de IS01 Enable identifi er code t able a s fact ory standar d IS03 Enable identifier co de table as AIM s tandar d.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 81 Start O f Configur ation Barcode Value Barcode Label Description CI08 Codabar identi fier code set ting CI09 Code 128 iden tifier code set.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 82 Start O f Configur ation 2. Hea der and T r ai ler Barcode Value Barcode Label Description CP11 Add code leng th as he ader enable (2 digi.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 83 Start O f Configur ation Full A SCII C ode 39 T able Code 39 A SCII Hex a - code Code 39 ASCII Hex a- code Full ASCII ---NUL 00 Full ASCII.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 84 Start O f Configur ation Full ASC II Code 39 T able (continued) Code 39 ASCII Hex a- code Code 39 A SCII Hex a- code Full ASCII ---RS Function k ey -----“CTL(L)” 1E Full ASCII ---- 2D Full ASCII ---US Function k ey -----“ AL T(L)” 1F Full ASCII ---.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 85 Start O f Configur ation Full A SCII Code 39 T able (continue d) Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---< 3C.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 86 Start O f Configur ation Full ASC II Code 39 T able (continued) Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII ---Z 5A Ful.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 87 Start O f Configur ation Full ASC II Code 39 T able (continued) Code 39 ASCII Hex a- code Code 39 ASCII Hex a- code Full ASCII --- x 78 Fu.
W irele ss Handheld Gun T ype Scanner 88 U SER ’ S M ANU AL Appendix 1: USB Virtual COM Driver Installation Cont act your dis tri butor to ge t the driv er and f ollow the s teps belo w to enable USB virtual COM port. 1. Connect the handheld scanner and the hos t (e.
U SER ’ S M ANU AL W irele ss Handheld Gun T ype Scanner 89 Appendix 2: Barcode Length Setting Intr oduction The lengt h of a bar code is the number of char acter s it cont ains, including check digit s. As list ed in the Def ault P aram eter s section, each bar code type has diff eren t def ault length.
An important point after buying a device Zebex Z-3190BT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zebex Z-3190BT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zebex Z-3190BT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zebex Z-3190BT you will learn all the available features of the product, as well as information on its operation. The information that you get Zebex Z-3190BT will certainly help you make a decision on the purchase.
If you already are a holder of Zebex Z-3190BT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zebex Z-3190BT.
However, one of the most important roles played by the user manual is to help in solving problems with Zebex Z-3190BT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zebex Z-3190BT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
